AI4AVSummary
ViewSonic LS700HD (VS17454) laser projector, controlled via RS-232 binary protocol and infrared (NEC-format IR). The source documents the full RS-232 command catalogue (194 numbered rows) covering power, source selection, picture adjustments, geometry, audio, language, 3D, networking configuration, and status queries. The source also documents an IR remote control table (28 NEC-format buttons, 4 bytes each) and 8 IR remote address codes (Code 1–8) for multi-projector isolation. Auxiliary LAN-based control surfaces (Crestron RoomView on TCP port 41794 with IPID 02, PJLink, SNMP v1, AMX DDG, Xpanel, web browser admin) are mentioned; only the Crestron port/IPID is stated, command bytes are not documented and are noted in Notes, not encoded as actions.
Transport
protocols:
- serial
- tcp
serial:
baud_rate: 115200 # default per source; menu also exposes 2400/4800/9600/14400/19200/38400/57600
data_bits: 8
parity: none
stop_bits: 1
flow_control: none
addressing:
port: 41794 # Crestron RoomView / e-Control reserved control port (source-stated)
# IPID: 02 (Crestron integration ID, source-stated)
auth:
type: none # inferred: no RS-232 login procedure in source
# Pin assignment (DB9, source-documented):
# Pin 2 = RX, Pin 3 = TX, Pin 5 = GND, Pin 7 = RTSZ, Pin 8 = CTSZ
# Pins 1, 4, 6, 9 = NC
# UNRESOLVED: TCP command payload format for Crestron e-Control not byte-documented.
# UNRESOLVED: PJLink / SNMP v1 / AMX DDG / Xpanel protocols mentioned but not documented.
# UNRESOLVED: Web admin (HTTP root path) default password "0000" stated - affects
# HTTP admin surface only; not encoded here because HTTP command set not documented.
# IR transport: source documents NEC-format IR remote codes (see Actions: ir_*).
# IR is a separate physical transport (optical, modulated) not in the protocols[]
# enum above; payloads are encoded as Actions for source-coverage completeness.
Traits
traits:
- powerable # inferred: power ON/OFF commands (rows 1-2)
- queryable # inferred: numerous Read/Status query commands
- levelable # inferred: volume, brightness, contrast, gain, hue, saturation, sharpness
Actions
# All RS-232 command payloads are verbatim hex byte sequences from the source
# RS232 command table. Line breaks in source tables (`<br>`) are concatenation;
# the final byte of each Write command is a checksum. Read commands are 11 bytes;
# Write commands are typically 10 bytes (0x06 lead) or 9 bytes (0x02 lead for
# Remote Key injection). Query responses appear in the Feedbacks section.
#
# IR actions (id prefix ir_) are verbatim 4-byte NEC-format codes from the
# source IR control table - separate physical transport from RS-232.
actions:
# --- Power & system reset (rows 1-6) ---
- id: power_on
label: Power On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x00 0x00 0x5D"
params: []
- id: power_off
label: Power Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x01 0x00 0x5E"
params: []
- id: power_status_query
label: Power Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x00 0x5E"
params: []
- id: projector_status_query
label: Projector Status Query (warm-up / cool-down / power state)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x26 0x84"
params: []
notes: "Source row 4 references 'Note 7' but source contains only Notes 1-6."
- id: reset_all_settings
label: Reset All Settings
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x02 0x00 0x5F"
params: []
- id: reset_color_settings
label: Reset Color Settings
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x2A 0x00 0x87"
params: []
# --- Splash screen (rows 7-10) ---
- id: splash_screen_blue
label: Splash Screen Blue
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x0A 0x01 0x68"
params: []
- id: splash_screen_viewsonic
label: Splash Screen ViewSonic
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x0A 0x02 0x69"
params: []
- id: splash_screen_off
label: Splash Screen Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x0A 0x04 0x6B"
params: []
- id: splash_screen_status_query
label: Splash Screen Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x0A 0x68"
params: []
# --- High Altitude Mode (rows 11-13) ---
- id: high_altitude_off
label: High Altitude Mode Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x0C 0x00 0x69"
params: []
- id: high_altitude_on
label: High Altitude Mode On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x0C 0x01 0x6A"
params: []
- id: high_altitude_status_query
label: High Altitude Mode Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x0C 0x6A"
params: []
# --- Light source mode (rows 14-21) ---
- id: light_source_mode_normal
label: Light Source Mode Normal
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x00 0x6D"
params: []
- id: light_source_mode_eco
label: Light Source Mode Eco
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x01 0x6E"
params: []
- id: light_source_mode_custom_20
label: Light Source Mode Custom 20
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x04 0x71"
params: []
- id: light_source_mode_custom_40
label: Light Source Mode Custom 40
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x05 0x72"
params: []
- id: light_source_mode_custom_60
label: Light Source Mode Custom 60
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x06 0x73"
params: []
- id: light_source_mode_custom_80
label: Light Source Mode Custom 80
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x07 0x74"
params: []
- id: light_source_mode_custom_100
label: Light Source Mode Custom 100
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x08 0x75"
params: []
- id: light_source_mode_status_query
label: Light Source Mode Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x10 0x6E"
params: []
# --- Message overlay (rows 22-24) ---
- id: message_off
label: Message Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x27 0x00 0x84"
params: []
- id: message_on
label: Message On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x27 0x01 0x85"
params: []
- id: message_status_query
label: Message Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x27 0x85"
params: []
# --- Projector Position (rows 25-29) ---
- id: projector_position_front_table
label: Projector Position Front Table
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x00 0x00 0x5E"
params: []
- id: projector_position_rear_table
label: Projector Position Rear Table
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x00 0x01 0x5F"
params: []
- id: projector_position_rear_ceiling
label: Projector Position Rear Ceiling
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x00 0x02 0x60"
params: []
- id: projector_position_front_ceiling
label: Projector Position Front Ceiling
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x00 0x03 0x61"
params: []
- id: projector_position_status_query
label: Projector Position Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x00 0x5F"
params: []
# --- 3D Sync (rows 30-36) ---
- id: three_d_sync_off
label: 3D Sync Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x20 0x00 0x7E"
params: []
- id: three_d_sync_auto
label: 3D Sync Auto
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x20 0x01 0x7F"
params: []
- id: three_d_sync_frame_sequential
label: 3D Sync Frame Sequential
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x20 0x02 0x80"
params: []
- id: three_d_sync_frame_packing
label: 3D Sync Frame Packing
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x20 0x03 0x81"
params: []
- id: three_d_sync_top_bottom
label: 3D Sync Top-Bottom
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x20 0x04 0x82"
params: []
- id: three_d_sync_side_by_side
label: 3D Sync Side-by-Side
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x20 0x05 0x83"
params: []
- id: three_d_sync_status_query
label: 3D Sync Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x20 0x7F"
params: []
# --- 3D Sync Convert (rows 37-39) ---
- id: three_d_sync_convert_off
label: 3D Sync Convert Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x21 0x00 0x7F"
params: []
- id: three_d_sync_convert_on
label: 3D Sync Convert On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x21 0x01 0x80"
params: []
- id: three_d_sync_convert_status_query
label: 3D Sync Convert Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x21 0x80"
params: []
# --- Contrast (rows 40-42) ---
- id: contrast_decrease
label: Contrast Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x02 0x00 0x60"
params: []
- id: contrast_increase
label: Contrast Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x02 0x01 0x61"
params: []
- id: contrast_get_value_query
label: Contrast Get Value Query (2-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x02 0x61"
params: []
# --- Brightness (rows 43-45) ---
- id: brightness_decrease
label: Brightness Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x03 0x00 0x61"
params: []
- id: brightness_increase
label: Brightness Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x03 0x01 0x62"
params: []
- id: brightness_get_value_query
label: Brightness Get Value Query (2-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x03 0x62"
params: []
# --- Aspect ratio (rows 46-52) ---
- id: aspect_ratio_auto
label: Aspect Ratio Auto
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x04 0x00 0x62"
params: []
- id: aspect_ratio_4_3
label: Aspect Ratio 4:3
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x04 0x02 0x64"
params: []
- id: aspect_ratio_16_9
label: Aspect Ratio 16:9
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x04 0x03 0x65"
params: []
- id: aspect_ratio_16_10
label: Aspect Ratio 16:10
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x04 0x04 0x66"
params: []
- id: aspect_ratio_native
label: Aspect Ratio Native
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x04 0x09 0x6B"
params: []
- id: aspect_ratio_cycle
label: Aspect Ratio Cycle
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x31 0x00 0x90"
params: []
- id: aspect_ratio_get_value_query
label: Aspect Ratio Get Value Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x04 0x63"
params: []
# --- Auto Adjust (row 53) ---
- id: auto_adjust_execute
label: Auto Adjust Execute
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x05 0x00 0x63"
params: []
notes: "Source note 6: only active with non-digital input (VGA/D-sub)."
# --- Horizontal position (rows 54-56) ---
- id: horizontal_position_shift_right
label: Horizontal Position Shift Right
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x06 0x01 0x65"
params: []
- id: horizontal_position_shift_left
label: Horizontal Position Shift Left
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x06 0x00 0x64"
params: []
- id: horizontal_position_get_value_query
label: Horizontal Position Get Value Query (1-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x06 0x65"
params: []
# --- Vertical position (rows 57-59) ---
- id: vertical_position_shift_up
label: Vertical Position Shift Up
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x07 0x00 0x65"
params: []
- id: vertical_position_shift_down
label: Vertical Position Shift Down
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x07 0x01 0x66"
params: []
- id: vertical_position_get_value_query
label: Vertical Position Get Value Query (1-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x07 0x66"
params: []
# --- Color temperature (rows 60-63) ---
- id: color_temperature_warm
label: Color Temperature Warm
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x08 0x00 0x66"
params: []
- id: color_temperature_normal
label: Color Temperature Normal
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x08 0x01 0x67"
params: []
- id: color_temperature_cool
label: Color Temperature Cool
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x08 0x03 0x69"
params: []
- id: color_temperature_get_value_query
label: Color Temperature Get Value Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x08 0x67"
params: []
# --- Blank (rows 64-66) ---
- id: blank_on
label: Blank On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x09 0x01 0x68"
params: []
- id: blank_off
label: Blank Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x09 0x00 0x67"
params: []
- id: blank_status_query
label: Blank Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x09 0x68"
params: []
# --- Keystone vertical (rows 67-69) ---
- id: keystone_vertical_decrease
label: Keystone Vertical Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0A 0x00 0x68"
params: []
- id: keystone_vertical_increase
label: Keystone Vertical Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0A 0x01 0x69"
params: []
- id: keystone_vertical_get_value_query
label: Keystone Vertical Get Value Query (1-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x0A 0x69"
params: []
# --- Keystone horizontal (rows 70-72) ---
- id: keystone_horizontal_decrease
label: Keystone Horizontal Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x31 0x00 0x8E"
params: []
- id: keystone_horizontal_increase
label: Keystone Horizontal Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x31 0x01 0x8F"
params: []
- id: keystone_horizontal_get_value_query
label: Keystone Horizontal Get Value Query (1-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x31 0x8F"
params: []
# --- Color mode (rows 73-78) ---
- id: color_mode_brightest
label: Color Mode Brightest
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x00 0x69"
params: []
- id: color_mode_movie
label: Color Mode Movie
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x01 0x6A"
params: []
- id: color_mode_sports
label: Color Mode Sports
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x11 0x7A"
params: []
- id: color_mode_gaming
label: Color Mode Gaming
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x12 0x7B"
params: []
- id: color_mode_presentation
label: Color Mode Presentation
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x14 0x7D"
params: []
- id: color_mode_status_query
label: Color Mode Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x0B 0x6A"
params: []
# --- Reset current color (row 79) ---
- id: reset_current_color_settings
label: Reset Current Color Settings
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x2A 0x00 0x87"
params: []
# --- Primary Color (rows 80-86) ---
- id: primary_color_r
label: Primary Color R
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x00 0x6E"
params: []
- id: primary_color_g
label: Primary Color G
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x01 0x6F"
params: []
- id: primary_color_b
label: Primary Color B
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x02 0x70"
params: []
- id: primary_color_c
label: Primary Color C
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x03 0x71"
params: []
- id: primary_color_m
label: Primary Color M
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x04 0x72"
params: []
- id: primary_color_y
label: Primary Color Y
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x05 0x73"
params: []
- id: primary_color_status_query
label: Primary Color Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x10 0x6F"
params: []
# --- Hue / Tint (rows 87-89) ---
- id: hue_tint_decrease
label: Hue / Tint Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x11 0x00 0x6F"
params: []
- id: hue_tint_increase
label: Hue / Tint Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x11 0x01 0x70"
params: []
- id: hue_tint_get_value_query
label: Hue / Tint Get Value Query (2-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x11 0x70"
params: []
# --- Saturation (rows 90-92) ---
- id: saturation_decrease
label: Saturation Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x12 0x00 0x70"
params: []
- id: saturation_increase
label: Saturation Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x12 0x01 0x71"
params: []
- id: saturation_get_value_query
label: Saturation Get Value Query (2-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x12 0x71"
params: []
# --- Gain (rows 93-95) ---
- id: gain_decrease
label: Gain Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x13 0x00 0x71"
params: []
- id: gain_increase
label: Gain Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x13 0x01 0x72"
params: []
- id: gain_get_value_query
label: Gain Get Value Query (2-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x13 0x72"
params: []
# --- Sharpness (rows 96-98) ---
- id: sharpness_decrease
label: Sharpness Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0E 0x00 0x6C"
params: []
- id: sharpness_increase
label: Sharpness Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0E 0x01 0x6D"
params: []
- id: sharpness_get_value_query
label: Sharpness Get Value Query (2-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x0E 0x6D"
params: []
# --- Freeze (rows 99-101) ---
- id: freeze_on
label: Freeze On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x00 0x01 0x60"
params: []
- id: freeze_off
label: Freeze Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x00 0x00 0x5F"
params: []
- id: freeze_status_query
label: Freeze Status Query (1-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x13 0x00 0x60"
params: []
# --- Source input (rows 102-108) ---
- id: source_input_dsub_comp_1
label: Source Input D-Sub / Comp. 1
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x00 0x60"
params: []
- id: source_input_dsub_comp_2
label: Source Input D-Sub / Comp. 2
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x08 0x68"
params: []
- id: source_input_hdmi_1
label: Source Input HDMI 1
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x03 0x63"
params: []
- id: source_input_hdmi_2
label: Source Input HDMI 2
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x07 0x67"
params: []
- id: source_input_composite_video
label: Source Input Composite Video
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x05 0x65"
params: []
- id: source_input_s_video
label: Source Input S-Video
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x06 0x66"
params: []
- id: source_input_status_query
label: Source Input Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x13 0x01 0x61"
params: []
# --- Quick Auto Search (rows 109-111) ---
- id: quick_auto_search_on
label: Quick Auto Search On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x02 0x01 0x62"
params: []
- id: quick_auto_search_off
label: Quick Auto Search Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x02 0x00 0x61"
params: []
- id: quick_auto_search_status_query
label: Quick Auto Search Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x13 0x02 0x62"
params: []
# --- Mute (rows 112-114) ---
- id: mute_on
label: Mute On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x00 0x01 0x61"
params: []
notes: "Source note 6: only active when an input source is applied."
- id: mute_off
label: Mute Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x00 0x00 0x60"
params: []
- id: mute_status_query
label: Mute Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x14 0x00 0x61"
params: []
# --- Volume (rows 115-118) ---
- id: volume_increase
label: Volume Increase
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x01 0x00 0x61"
params: []
- id: volume_decrease
label: Volume Decrease
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x02 0x00 0x62"
params: []
- id: volume_write_value
label: Volume Write Value
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x2A 0x11 0x9A"
params: []
notes: "Source lists payload verbatim; the value byte position is not separately documented in this excerpt."
- id: volume_get_value_query
label: Volume Get Value Query (1-byte response)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x14 0x03 0x64"
params: []
# --- Language (rows 119-141) ---
- id: language_english
label: Language English
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x00 0x61"
params: []
- id: language_francais
label: Language Français
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x01 0x62"
params: []
- id: language_deutsch
label: Language Deutsch
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x02 0x63"
params: []
- id: language_italiano
label: Language Italiano
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x03 0x64"
params: []
- id: language_espanol
label: Language Español
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x04 0x65"
params: []
- id: language_russian
label: Language Русский
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x05 0x66"
params: []
- id: language_traditional_chinese
label: Language 繁體中文
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x06 0x67"
params: []
- id: language_simplified_chinese
label: Language 简体中文
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x07 0x68"
params: []
- id: language_japanese
label: Language 日本語
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x08 0x69"
params: []
- id: language_korean
label: Language 한국어
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x09 0x6A"
params: []
- id: language_swedish
label: Language Swedish (source-spelled "Swidish")
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x0a 0x6B"
params: []
- id: language_dutch
label: Language Dutch
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x0b 0x6C"
params: []
- id: language_turkish
label: Language Turkish
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x0c 0x6D"
params: []
- id: language_czech
label: Language Czech
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x0d 0x6E"
params: []
- id: language_portuguese
label: Language Portuguese (source-spelled "Portugese")
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x0e 0x6F"
params: []
- id: language_thai
label: Language Thai
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x0f 0x70"
params: []
- id: language_polish
label: Language Polish
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x10 0x71"
params: []
- id: language_finnish
label: Language Finnish
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x11 0x72"
params: []
- id: language_arabic
label: Language Arabic
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x12 0x73"
params: []
- id: language_indonesian
label: Language Indonesian (source-spelled "Indonesia")
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x13 0x74"
params: []
- id: language_hindi
label: Language Hindi
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x14 0x75"
params: []
- id: language_vietnamese
label: Language Vietnamese (source-spelled "Vie")
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x15 0x76"
params: []
- id: language_status_query
label: Language Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x00 0x62"
params: []
# --- HDMI Format (rows 142-145) ---
- id: hdmi_format_rgb
label: HDMI Format RGB
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x28 0x00 0x85"
params: []
- id: hdmi_format_yuv
label: HDMI Format YUV
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x28 0x01 0x86"
params: []
- id: hdmi_format_auto
label: HDMI Format Auto
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x28 0x02 0x87"
params: []
- id: hdmi_format_status_query
label: HDMI Format Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x28 0x86"
params: []
# --- HDMI Range (rows 146-149) ---
- id: hdmi_range_enhanced
label: HDMI Range Enhanced (0-255)
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x29 0x00 0x86"
params: []
- id: hdmi_range_normal
label: HDMI Range Normal (16-235)
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x29 0x01 0x87"
params: []
- id: hdmi_range_auto
label: HDMI Range Auto
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x29 0x02 0x88"
params: []
- id: hdmi_range_status_query
label: HDMI Range Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x29 0x87"
params: []
# --- CEC (rows 150-152) ---
- id: cec_off
label: CEC Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x2B 0x00 0x88"
params: []
- id: cec_on
label: CEC On
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x2B 0x01 0x89"
params: []
- id: cec_status_query
label: CEC Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x2B 0x89"
params: []
# --- Error status (row 153) ---
- id: error_status_query
label: Error Status Query (20-item response; service debug)
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x0C 0x0D 0x66"
params: []
# --- Brilliant Color (rows 154-165) ---
- id: brilliant_color_off
label: Brilliant Color Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x00 0x6D"
params: []
- id: brilliant_color_color_1
label: Brilliant Color Color 1
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x01 0x6E"
params: []
- id: brilliant_color_color_2
label: Brilliant Color Color 2
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x02 0x6F"
params: []
- id: brilliant_color_color_3
label: Brilliant Color Color 3
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x03 0x70"
params: []
- id: brilliant_color_color_4
label: Brilliant Color Color 4
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x04 0x71"
params: []
- id: brilliant_color_color_5
label: Brilliant Color Color 5
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x05 0x72"
params: []
- id: brilliant_color_color_6
label: Brilliant Color Color 6
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x06 0x73"
params: []
- id: brilliant_color_color_7
label: Brilliant Color Color 7
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x07 0x74"
params: []
- id: brilliant_color_color_8
label: Brilliant Color Color 8
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x08 0x75"
params: []
- id: brilliant_color_color_9
label: Brilliant Color Color 9
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x09 0x76"
params: []
- id: brilliant_color_color_10
label: Brilliant Color Color 10
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0F 0x0A 0x77"
params: []
- id: brilliant_color_status_query
label: Brilliant Color Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x0F 0x6E"
params: []
# --- Remote Control Code (rows 166-174) ---
- id: remote_control_code_1
label: Remote Control Code 1
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x00 0xA0"
params: []
- id: remote_control_code_2
label: Remote Control Code 2
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x01 0xA1"
params: []
- id: remote_control_code_3
label: Remote Control Code 3
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x02 0xA2"
params: []
- id: remote_control_code_4
label: Remote Control Code 4
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x03 0xA3"
params: []
- id: remote_control_code_5
label: Remote Control Code 5
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x04 0xA4"
params: []
- id: remote_control_code_6
label: Remote Control Code 6
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x05 0xA5"
params: []
- id: remote_control_code_7
label: Remote Control Code 7
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x06 0xA6"
params: []
- id: remote_control_code_8
label: Remote Control Code 8 (controls every projector)
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x07 0xA7"
params: []
- id: remote_control_code_status_query
label: Remote Control Code Status Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x0C 0x48 0xA1"
params: []
# --- Over Scan (rows 175-181) ---
- id: over_scan_off
label: Over Scan Off
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x33 0x00 0x90"
params: []
- id: over_scan_value_1
label: Over Scan Value 1
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x33 0x01 0x91"
params: []
- id: over_scan_value_2
label: Over Scan Value 2
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x33 0x02 0x92"
params: []
- id: over_scan_value_3
label: Over Scan Value 3
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x33 0x03 0x93"
params: []
- id: over_scan_value_4
label: Over Scan Value 4
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x33 0x04 0x94"
params: []
- id: over_scan_value_5
label: Over Scan Value 5
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x33 0x05 0x95"
params: []
- id: over_scan_get_value_query
label: Over Scan Get Value Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x33 0x91"
params: []
# --- Remote Key injection (rows 182-191) ---
- id: remote_key_menu
label: Remote Key Menu
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0F 0x61"
params: []
- id: remote_key_exit
label: Remote Key Exit
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x13 0x65"
params: []
- id: remote_key_top
label: Remote Key Top
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0B 0x5D"
params: []
- id: remote_key_bottom
label: Remote Key Bottom
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0C 0x5E"
params: []
- id: remote_key_left
label: Remote Key Left
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0D 0x5F"
params: []
- id: remote_key_right
label: Remote Key Right
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0E 0x60"
params: []
- id: remote_key_source
label: Remote Key Source
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x04 0x56"
params: []
- id: remote_key_enter
label: Remote Key Enter
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x15 0x67"
params: []
- id: remote_key_auto
label: Remote Key Auto
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x08 0x5A"
params: []
- id: remote_key_my_button
label: Remote Key My Button
kind: action
command: "0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x11 0x63"
params: []
# --- AMX device discovery (row 192) ---
- id: amx_discovery_response
label: AMX Discovery Response
kind: action
command: "AMX"
params: []
notes: "Sending 'AMX' elicits AMX DDG response: AMXB<-SDKClass=VideoProjector><-Make=ViewSonic><-Model=PX800HD>"
# --- Operating temperature (row 193) ---
- id: operating_temperature_query
label: Operating Temperature Query
kind: query
command: "0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x03 0x65"
params: []
notes: "Source note 1: 4-byte value at byte7-10, big-endian, divided by 10 = degrees C."
# --- Lamp mode cycle (row 194) ---
- id: lamp_mode_cycle
label: Lamp Mode Cycle
kind: action
command: "0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x36 0x00 0x95"
params: []
# =====================================================================
# IR remote control (NEC format, 4-byte codes) - source IR table.
# Separate physical transport (optical) from RS-232/TCP. Payloads are
# verbatim from source IR control table. Byte 1 high nibble is the IR
# remote address code (see ir_address_code_* below); source lists
# default X3 (resolves to 83 for Code 1, F3 for Code 8, etc.).
# =====================================================================
# --- IR address codes (source: 8 codes for multi-projector isolation) ---
# Source documents these as the byte-1/byte-2 prefix emitted by an IR
# remote programmed to that code. Distinct from RS-232 rows 166-173,
# which tell the PROJECTOR which code to listen for.
- id: ir_address_code_1
label: IR Remote Address Code 1 (83 F4)
kind: action
command: "83 F4"
params: []
notes: "IR NEC address code. Byte1+byte2 prefix for IR commands when projector set to Remote Control Code 1."
- id: ir_address_code_2
label: IR Remote Address Code 2 (93 F4)
kind: action
command: "93 F4"
params: []
notes: "IR NEC address code. Byte1+byte2 prefix for IR commands when projector set to Remote Control Code 2."
- id: ir_address_code_3
label: IR Remote Address Code 3 (A3 F4)
kind: action
command: "A3 F4"
params: []
notes: "IR NEC address code. Byte1+byte2 prefix for IR commands when projector set to Remote Control Code 3."
- id: ir_address_code_4
label: IR Remote Address Code 4 (B3 F4)
kind: action
command: "B3 F4"
params: []
notes: "IR NEC address code. Byte1+byte2 prefix for IR commands when projector set to Remote Control Code 4."
- id: ir_address_code_5
label: IR Remote Address Code 5 (C3 F4)
kind: action
command: "C3 F4"
params: []
notes: "IR NEC address code. Byte1+byte2 prefix for IR commands when projector set to Remote Control Code 5."
- id: ir_address_code_6
label: IR Remote Address Code 6 (D3 F4)
kind: action
command: "D3 F4"
params: []
notes: "IR NEC address code. Byte1+byte2 prefix for IR commands when projector set to Remote Control Code 6."
- id: ir_address_code_7
label: IR Remote Address Code 7 (E3 F4)
kind: action
command: "E3 F4"
params: []
notes: "IR NEC address code. Byte1+byte2 prefix for IR commands when projector set to Remote Control Code 7."
- id: ir_address_code_8
label: IR Remote Address Code 8 (F3 F4, controls every projector)
kind: action
command: "F3 F4"
params: []
notes: "IR NEC address code. Controls every projector regardless of selected Remote Control Code."
# --- IR remote buttons (source IR control table, default code) ---
- id: ir_button_pgdn
label: IR Button PgDn
kind: action
command: "X3 F4 05 FA"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_pgup
label: IR Button PgUp
kind: action
command: "X3 F4 06 F9"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_blank
label: IR Button Blank
kind: action
command: "X3 F4 07 F8"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_auto_sync
label: IR Button Auto Sync
kind: action
command: "X3 F4 08 F7"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_up
label: IR Button Up
kind: action
command: "X3 F4 0B F4"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_down
label: IR Button Down
kind: action
command: "X3 F4 0C F3"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_left
label: IR Button Left
kind: action
command: "X3 F4 0E F1"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_right
label: IR Button Right
kind: action
command: "X3 F4 0F F0"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_color_mode
label: IR Button Color Mode
kind: action
command: "X3 F4 10 EF"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_mute
label: IR Button Mute
kind: action
command: "X3 F4 14 EB"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_input
label: IR Button Input
kind: action
command: "X3 F4 15 EA"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_powering_up
label: IR Button Powering Up
kind: action
command: "X3 F4 4F A0"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_power_off
label: IR Button Power Off
kind: action
command: "X3 F4 4E A1"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_exit
label: IR Button Exit
kind: action
command: "X3 F4 28 D7"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_eco_mode
label: IR Button Eco Mode
kind: action
command: "X3 F4 2B D4"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_menu
label: IR Button Menu
kind: action
command: "X3 F4 30 CF"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_source
label: IR Button Source
kind: action
command: "X3 F4 40 BF"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_pattern
label: IR Button Pattern
kind: action
command: "X3 F4 55 AA"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_video
label: IR Button Video
kind: action
command: "X3 F4 52 ad"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*). Byte4 case as in source."
- id: ir_button_hdmi
label: IR Button HDMI
kind: action
command: "X3 F4 58 A7"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_volume_up
label: IR Button Volume+
kind: action
command: "X3 F4 82 7D"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_volume_down
label: IR Button Volume-
kind: action
command: "X3 F4 83 7C"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_zoom_up
label: IR Button Zoom+
kind: action
command: "X3 F4 67 98"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_zoom_down
label: IR Button Zoom-
kind: action
command: "X3 F4 68 97"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_freeze
label: IR Button Freeze
kind: action
command: "X3 F4 03 FC"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_aspect
label: IR Button Aspect
kind: action
command: "X3 F4 13 EC"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_comp
label: IR Button COMP
kind: action
command: "X3 F4 41 BC"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
- id: ir_button_information
label: IR Button Information
kind: action
command: "X3 F4 97 68"
params: []
notes: "IR NEC, 4-byte. 'X3' = address-code-dependent byte1 (see ir_address_code_*)."
Feedbacks
feedbacks:
# Generic ACK for Write commands: 0x03 0x14 0x00 0x00 0x00 0x14
- id: write_ack
type: bytes
values: ["0x03 0x14 0x00 0x00 0x00 0x14"]
- id: power_state
type: enum
values: [off, warm_up, cool_down, power_on, power_down]
# Source note 5 enumerates the four-byte status responses:
# power_off: 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x00 0x17
# warm_up: 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x01 0x18
# power_on: 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x02 0x19
# cool_down: 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x03 0x1A
- id: function_disabled_indicator
type: bytes
values: ["0x00 0x14 0x00 0x00 0x00 0x14"]
# Source note 3: leading 0x00 indicates function greyed-out / unavailable.
- id: amx_ddg_response
type: text
values: ["AMXB<-SDKClass=VideoProjector><-Make=ViewSonic><-Model=PX800HD>"]
- id: error_status_block
type: bytes
# Source note 2: 32-byte service-debug response, 20 items.
# Items 0-17: 1 byte each
# Item 18: 4 bytes (first burn-in error minutes)
# Item 19: 1 byte (lamp status)
# Item 20: 2 bytes (lamp error status)
# Full example payload from source:
values: ["0x05 0x14 0x00 0x16 0x00 0x00 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 0x11 0x01 0x02 0x03 0x04 0x01 0x01 0x02 0xFF"]
- id: operating_temperature
type: numeric
unit: degrees_celsius_x10
# Source note 1: HEX2DEC(ddccbbaa) / 10. Example bytes 0x29 0x01 0x00 0x00 = 0x129 = 297 → 29.7 °C.
# UNRESOLVED: per-setting Read-value response byte encodings reference
# "value mapping table 3.2.1 (1 byte)" and "3.2.2 (2 byte)" which are not
# present in this refined excerpt.
Variables
# Discrete-value settables are encoded as enumerated actions above.
# Continuous settables that only have inc/dec remote operations:
variables:
- id: contrast
type: integer
# UNRESOLVED: 2-byte value mapping table 3.2.2 not in this excerpt.
- id: brightness
type: integer
- id: hue_tint
type: integer
- id: saturation
type: integer
- id: gain
type: integer
- id: sharpness
type: integer
- id: volume
type: integer
# Source also documents a direct "Volume Write Value" action (row 117)
# but the value-byte position is not specified in this excerpt.
- id: keystone_vertical
type: integer
- id: keystone_horizontal
type: integer
- id: horizontal_position
type: integer
- id: vertical_position
type: integer
Events
events: []
# UNRESOLVED: source does not document unsolicited notifications over RS-232.
Macros
macros: []
# UNRESOLVED: source documents no multi-step command sequences.
Safety
confirmation_required_for: []
interlocks:
- command_ids: [power_on, power_off]
rule: "Source note 5: during Warm Up and Cool Down, do not perform other commands."
- command_ids: [mute_on, mute_off]
rule: "Source note 6: Mute is only active when an input source is applied."
- command_ids: [auto_adjust_execute]
rule: "Source note 6: Auto Adjust only active with non-digital input (VGA/D-sub)."
# UNRESOLVED: no formal hardware interlocks or power-sequencing requirements stated.
Notes
- All hex byte sequences are copied verbatim from the source RS232 command table. Line breaks inside table cells (
<br>) indicate continuation of a single payload; they are not field separators. - The final byte of every Write/Query payload is a checksum computed by the projector. The exact checksum algorithm is not documented in this excerpt — implementers must either re-derive it from the documented examples or pass payloads verbatim.
- Read (query) commands use lead byte
0x07; Write commands use0x06; Remote Key injection uses0x02. - The command
0x00 0x14 0x00 0x00 0x00 0x14is returned (leading0x00) when a function is greyed-out / unavailable in the current state (source note 3). - The source explicitly enumerates the LS700HD (VS17454). Recovery notes for this family confirm the same RS232 command table is shared by LS700-4K (VS17455), LS700-4KP, and LS700HD; operators may extend
compatible_with.modelsafter consulting the corresponding user-guide page 72 of each variant. - IR control: the source documents a separate NEC-format IR remote table (28 buttons) plus 8 IR address codes (Code 1–8). These are encoded as
ir_*actions for source coverage. IR is a distinct physical transport (optical, modulated 38 kHz carrier typical for NEC) — NOT sent over the RS-232 serial port. The "X3" byte-1 placeholder is address-code-dependent (Code 1 → 83, Code 2 → 93, … Code 8 → F3); byte 2 is fixed F4. An IR transmitter must be programmed to the matching code that the projector is set to (via RS-232 rows 166–173 or the System: Remote Control Code menu). - Auxiliary LAN control surfaces mentioned in source; only Crestron port/IPID are stated, command bytes NOT documented:
- Crestron RoomView / e-Control — TCP port
41794, IPID02(stated verbatim in source "About Crestron e-Control" / "Crestron RoomView" sections). Encoded in Transport.addressing above. - PJLink — protocol mentioned ("compatible with PJLink™"); command set not in this excerpt.
- SNMP v1 — mentioned; OIDs not in this excerpt.
- AMX DDG — discovery string
AMXelicits the textual response encoded above (works over both RS-232 row 192 and LAN). - Xpanel V1.10 — mentioned; protocol not in this excerpt.
- Web browser admin — root path of projector IP; default administrator password
0000(stated). Affects web admin only; HTTP command set not documented.
- Crestron RoomView / e-Control — TCP port
- Baud rate is
115200 bpsby default; the System menu also exposes 2400 / 4800 / 9600 / 14400 / 19200 / 38400 / 57600. The selected baud rate on the projector must match the controller's serial config. - Control terminals per source Specifications: RS232 (9-pin) ×1, USB (mini B) ×1, LAN ×1. USB port purpose (control vs service) not stated.
Provenance
source_domains:
- viewsonicglobal.com
- manuals.viewsonic.com
- manuals.plus
- projector-database.com
- manualowl.com
source_urls:
- https://www.viewsonicglobal.com/public/products_download/user_guide/Projector/LS700HD/LS700HD_UG_ENG.pdf
- https://manuals.viewsonic.com/IFP32_RS-232_Protocols
- https://manuals.plus/m/0acef2dd3c8a812de94b9dd79be0012d5e433ee90d8a7b770dd8f1b4783fb15a.pdf
- https://www.projector-database.com/pdf/viewsonicls7004k-qs.pdf
- https://www.manualowl.com/m/ViewSonic/LS700-4K/Manual/604053
retrieved_at: 2026-07-21T23:12:14.291Z
last_checked_at: 2026-07-22T07:56:24.874Z
Verification Summary
verdict: verified
checked_at: 2026-07-22T07:56:24.874Z
matched_actions: 230
action_count: 230
confidence: medium
summary: "All 230 spec actions verified against 194 RS-232 commands + 28 IR buttons + 8 IR address codes in source; exact wire-level match on all hex sequences and transport parameters. (20 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "LAN/Crestron/PJLink/SNMP/AMX/Xpanel byte-level protocols not documented in source — only port 41794 + IPID 02 are stated."
- "Other LS700 family variants (LS700-4K VS17455, LS700-4KP) share the RS232 table per recovery notes but not stated in this refined source."
- "Firmware version compatibility not stated."
- "Source row 4 references \"Note 7\" but source only contains Notes 1–6."
- "TCP command payload format for Crestron e-Control not byte-documented."
- "PJLink / SNMP v1 / AMX DDG / Xpanel protocols mentioned but not documented."
- "Web admin (HTTP root path) default password \"0000\" stated - affects"
- "per-setting Read-value response byte encodings reference"
- "2-byte value mapping table 3.2.2 not in this excerpt."
- "source does not document unsolicited notifications over RS-232."
- "source documents no multi-step command sequences."
- "no formal hardware interlocks or power-sequencing requirements stated."
- "exact checksum algorithm not documented in this excerpt."
- "1-byte and 2-byte value mapping tables (source sections 3.2.1 / 3.2.2) referenced by queries but not present in this refined excerpt."
- "volume \"Write Value\" (row 117) value-byte position not separately specified."
- "Crestron e-Control / PJLink / SNMP / AMX / Xpanel / web-admin byte-level protocols out of scope (only port 41794 + IPID 02 + web password stated)."
- "firmware version compatibility not stated."
- "source row 4 references \"Note 7\" but source contains only Notes 1-6."
- "other LS700 family models (LS700-4K, LS700-4KP) not explicitly stated in this excerpt; cross-model applicability inferred only from recovery notes."
- "IR NEC carrier frequency, repeat-frame behavior, and timing not documented in this excerpt."
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0