Sharp PN-E603 RS-232 / IP control commands

Summary

Professional LCD monitor supporting RS-232C serial and LAN (TCP/IP) control. Commands identical across both transports. Daisy chain up to 25 monitors via RS-232C. RS-232C and LAN cannot be used simultaneously.

Transport

protocols:
  - serial
  - tcp
serial:
  baud_rate: 9600  # also supports 19200, 38400 - source states BAUD RATE setting
  data_bits: 8
  parity: none
  stop_bits: 1
  flow_control: none
addressing:
  # UNRESOLVED: TCP port number not stated in source (factory preset IP: 192.168.150.2)
auth:
  type: none  # inferred: RS-232C has no auth procedure in source
  # Note: LAN control requires username/password - see Notes

Traits

# powerable: POWR command present
# routable: INPS command present
# queryable: multiple R-direction commands present
# levelable: VOLM, VLMP, CONT, BLVL, TINT, COLR, SHRP, TREBLE, BASS, BALANCE present

Actions

# Power control
- id: POWR
  label: Power Control
  kind: action
  params:
    - name: state
      type: integer
      description: "0=standby, 1=normal"
  direction: W

# Input mode selection
- id: INPS
  label: Input Mode Selection
  kind: action
  params:
    - name: input
      type: integer
      description: "1=DVI-I, 2=D-SUB[RGB], 3=D-SUB[COMPONENT], 4=D-SUB[VIDEO], 9=HDMI1[AV], 10=HDMI1[PC], 12=HDMI2[AV], 13=HDMI2[PC], 14=DisplayPort"
  direction: W

# SCREEN menu
- id: ASNC
  label: Auto Adjust
  kind: action
  params:
    - name: value
      type: integer
      description: "1=execute"
  direction: W
- id: CLCK
  label: Clock
  kind: action
  params:
    - name: value
      type: integer
      description: "0-1200"
  direction: WR
- id: PHSE
  label: Phase
  kind: action
  params:
    - name: value
      type: integer
      description: "0-63"
  direction: WR
- id: HPOS
  label: H Position
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: VPOS
  label: V Position
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: HSIZ
  label: H Size
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: VSIZ
  label: V Size
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: HRES
  label: H Resolution
  kind: action
  params:
    - name: value
      type: integer
      description: "300-1920"
  direction: WR
- id: VRES
  label: V Resolution
  kind: action
  params:
    - name: value
      type: integer
      description: "200-1200"
  direction: WR
- id: PXCK
  label: Resolution Check
  kind: query
  params: []
  direction: R
- id: PXSL
  label: Pixel Setting
  kind: action
  params:
    - name: mode
      type: integer
      description: "1-10"
  direction: WR
- id: RESO
  label: Resolution Check (AV)
  kind: query
  params: []
  direction: R
- id: Z2SP
  label: Zoom2 Special Setting
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: ARST
  label: Reset
  kind: action
  params:
    - name: value
      type: integer
      description: "1=SCREEN reset, 2=PICTURE reset, 3=AUDIO reset"
  direction: W

# PICTURE menu
- id: VLMP
  label: Bright
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31"
  direction: WR
- id: CONT
  label: Contrast
  kind: action
  params:
    - name: value
      type: integer
      description: "0-60"
  direction: WR
- id: BLVL
  label: Black Level
  kind: action
  params:
    - name: value
      type: integer
      description: "0-60"
  direction: WR
- id: TINT
  label: Tint
  kind: action
  params:
    - name: value
      type: integer
      description: "0-60"
  direction: WR
- id: COLR
  label: Colors
  kind: action
  params:
    - name: value
      type: integer
      description: "0-60"
  direction: WR
- id: SHRP
  label: Sharpness
  kind: action
  params:
    - name: value
      type: integer
      description: "0-24"
  direction: WR
- id: BMOD
  label: Color Mode
  kind: action
  params:
    - name: value
      type: integer
      description: "0=STD, 2=VIVID, 3=sRGB, 4=HIGH ILLUMINANCE"
  direction: WR
- id: CTMP
  label: Color Temp
  kind: action
  params:
    - name: value
      type: integer
      description: "0=PC, 1-28=preset, 99=USER"
  direction: WR
- id: CRTR
  label: R-Contrast
  kind: action
  params:
    - name: value
      type: integer
      description: "0-256"
  direction: WR
- id: CRTG
  label: G-Contrast
  kind: action
  params:
    - name: value
      type: integer
      description: "0-256"
  direction: WR
- id: CRTB
  label: B-Contrast
  kind: action
  params:
    - name: value
      type: integer
      description: "0-256"
  direction: WR
- id: OFSR
  label: R-Offset
  kind: action
  params:
    - name: value
      type: integer
      description: "-127-127"
  direction: WR
- id: OFSG
  label: G-Offset
  kind: action
  params:
    - name: value
      type: integer
      description: "-127-127"
  direction: WR
- id: OFSB
  label: B-Offset
  kind: action
  params:
    - name: value
      type: integer
      description: "-127-127"
  direction: WR
- id: CPTU
  label: Copy To User
  kind: action
  params:
    - name: value
      type: integer
      description: "0=execute"
  direction: W
- id: GAMM
  label: Gamma
  kind: action
  params:
    - name: value
      type: integer
      description: "0-6"
  direction: WR
- id: FLES
  label: Flesh Tone
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=LOW, 2=HIGH"
  direction: WR
- id: CMHR
  label: C.M.S.-Hue R
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMHY
  label: C.M.S.-Hue Y
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMHG
  label: C.M.S.-Hue G
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMHC
  label: C.M.S.-Hue C
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMHB
  label: C.M.S.-Hue B
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMHM
  label: C.M.S.-Hue M
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMSR
  label: C.M.S.-Saturation R
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMSY
  label: C.M.S.-Saturation Y
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMSG
  label: C.M.S.-Saturation G
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMSC
  label: C.M.S.-Saturation C
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMSB
  label: C.M.S.-Saturation B
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMSM
  label: C.M.S.-Saturation M
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMVR
  label: C.M.S.-Value R
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMVY
  label: C.M.S.-Value Y
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMVG
  label: C.M.S.-Value G
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMVC
  label: C.M.S.-Value C
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMVB
  label: C.M.S.-Value B
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: CMVM
  label: C.M.S.-Value M
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: AGIN
  label: Advanced Auto
  kind: action
  params:
    - name: value
      type: integer
      description: "1=execute"
  direction: W
- id: ANGA
  label: Analog Gain
  kind: action
  params:
    - name: value
      type: integer
      description: "0-127"
  direction: WR
- id: ANOF
  label: Analog Offset
  kind: action
  params:
    - name: value
      type: integer
      description: "0-127"
  direction: WR
- id: TDNR
  label: 3D-NR
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=LOW, 2=HIGH"
  direction: WR
- id: MPNR
  label: MPEG-NR
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: YCSP
  label: 3D-Y/C
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: AHDR
  label: RGB Input Range HDMI1[AV]
  kind: action
  params:
    - name: value
      type: integer
      description: "0=AUTO, 1=FULL, 2=LIMITED"
  direction: WR
- id: PHDR
  label: RGB Input Range HDMI1[PC]
  kind: action
  params:
    - name: value
      type: integer
      description: "0=AUTO, 1=FULL, 2=LIMITED"
  direction: WR
- id: AH2R
  label: RGB Input Range HDMI2[AV]
  kind: action
  params:
    - name: value
      type: integer
      description: "0=AUTO, 1=FULL, 2=LIMITED"
  direction: WR
- id: PH2R
  label: RGB Input Range HDMI2[PC]
  kind: action
  params:
    - name: value
      type: integer
      description: "0=AUTO, 1=FULL, 2=LIMITED"
  direction: WR
- id: PDVR
  label: RGB Input Range DVI-I
  kind: action
  params:
    - name: value
      type: integer
      description: "1=FULL, 2=LIMITED"
  direction: WR
- id: PDSR
  label: RGB Input Range D-SUB
  kind: action
  params:
    - name: value
      type: integer
      description: "1=FULL, 2=LIMITED"
  direction: WR
- id: PDPR
  label: RGB Input Range DisplayPort
  kind: action
  params:
    - name: value
      type: integer
      description: "0=AUTO, 1=FULL, 2=LIMITED"
  direction: WR
- id: ACNT
  label: Active Contrast
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: PTDF
  label: Display Color Pattern
  kind: action
  params:
    - name: value
      type: integer
      description: "0=none, 1=white, 2=red, 3=green, 4=blue, 99=RGB mixed"
  direction: WR
- id: PTDR
  label: Display Color Pattern R
  kind: action
  params:
    - name: value
      type: integer
      description: "0-15"
  direction: WR
- id: PTDG
  label: Display Color Pattern G
  kind: action
  params:
    - name: value
      type: integer
      description: "0-15"
  direction: WR
- id: PTDB
  label: Display Color Pattern B
  kind: action
  params:
    - name: value
      type: integer
      description: "0-15"
  direction: WR

# AUDIO menu
- id: AUTR
  label: Treble
  kind: action
  params:
    - name: value
      type: integer
      description: "-5-5"
  direction: WR
- id: AUBS
  label: Bass
  kind: action
  params:
    - name: value
      type: integer
      description: "-5-5"
  direction: WR
- id: AUBL
  label: Balance
  kind: action
  params:
    - name: value
      type: integer
      description: "-10-10"
  direction: WR
- id: VOLM
  label: Volume
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31"
  direction: WR
- id: MUTE
  label: Mute
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR

# SETUP menu
- id: DATE
  label: Date/Time Setting
  kind: action
  params:
    - name: value
      type: string
      description: "AABBCCDDEE format (Year/Month/Day/Hour/Minute)"
  direction: WR
- id: DTFT
  label: Date Display Format
  kind: action
  params:
    - name: value
      type: integer
      description: "0=YYYY/MM/DD, 1=MM/DD/YYYY, 2=DD/MM/YYYY"
  direction: WR
- id: TMFT
  label: Time Display Format
  kind: action
  params:
    - name: value
      type: integer
      description: "0=24-hour, 1=12-hour"
  direction: WR
- id: SC01
  label: Schedule 1
  kind: action
  params:
    - name: value
      type: string
      description: "ABCDEFFGGH format"
  direction: WR
- id: SC02
  label: Schedule 2
  kind: action
  params:
    - name: value
      type: string
      description: "ABCDEFFGGH format"
  direction: WR
- id: SC03
  label: Schedule 3
  kind: action
  params:
    - name: value
      type: string
      description: "ABCDEFFGGH format"
  direction: WR
- id: SC04
  label: Schedule 4
  kind: action
  params:
    - name: value
      type: string
      description: "ABCDEFFGGH format"
  direction: WR
- id: SC05
  label: Schedule 5
  kind: action
  params:
    - name: value
      type: string
      description: "ABCDEFFGGH format"
  direction: WR
- id: SC06
  label: Schedule 6
  kind: action
  params:
    - name: value
      type: string
      description: "ABCDEFFGGH format"
  direction: WR
- id: SC07
  label: Schedule 7
  kind: action
  params:
    - name: value
      type: string
      description: "ABCDEFFGGH format"
  direction: WR
- id: SC08
  label: Schedule 8
  kind: action
  params:
    - name: value
      type: string
      description: "ABCDEFFGGH format"
  direction: WR
- id: SB01
  label: Schedule Brightness 1
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31 or 99=disable"
  direction: WR
- id: SB02
  label: Schedule Brightness 2
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31 or 99=disable"
  direction: WR
- id: SB03
  label: Schedule Brightness 3
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31 or 99=disable"
  direction: WR
- id: SB04
  label: Schedule Brightness 4
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31 or 99=disable"
  direction: WR
- id: SB05
  label: Schedule Brightness 5
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31 or 99=disable"
  direction: WR
- id: SB06
  label: Schedule Brightness 6
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31 or 99=disable"
  direction: WR
- id: SB07
  label: Schedule Brightness 7
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31 or 99=disable"
  direction: WR
- id: SB08
  label: Schedule Brightness 8
  kind: action
  params:
    - name: value
      type: integer
      description: "0-31 or 99=disable"
  direction: WR
- id: LANG
  label: Language
  kind: action
  params:
    - name: value
      type: integer
      description: "0=ENGLISH, 1=DEUTSCH, 2=FRANCAIS, 3=ITALIANO, 4=ESPANOL, 5=РУССКИЙ, 6=additional"
  direction: WR
- id: HDSL
  label: HDMI1 Input Select
  kind: action
  params:
    - name: value
      type: integer
      description: "0=PC, 1=AV"
  direction: WR
- id: H2SL
  label: HDMI2 Input Select
  kind: action
  params:
    - name: value
      type: integer
      description: "0=PC, 1=AV"
  direction: WR
- id: SLDS
  label: D-SUB Input Select
  kind: action
  params:
    - name: value
      type: integer
      description: "0=RGB, 1=COMPONENT, 2=VIDEO"
  direction: WR
- id: HDAW
  label: HDMI1 Auto View
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: H2AW
  label: HDMI2 Auto View
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: HPCT
  label: Hot Plug Control DVI-I
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: HPCH
  label: Hot Plug Control HDMI1
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: HPH2
  label: Hot Plug Control HDMI2
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: DVED
  label: EDID Select DVI-I
  kind: action
  params:
    - name: value
      type: integer
      description: "0=AUTO, 1=DIGITAL, 2=ANALOG"
  direction: WR
- id: ASDP
  label: Audio Select DVI-I
  kind: action
  params:
    - name: value
      type: integer
      description: "1=AUDIO1, 2=AUDIO2"
  direction: WR
- id: ASAP
  label: Audio Select D-SUB RGB
  kind: action
  params:
    - name: value
      type: integer
      description: "1=AUDIO1, 2=AUDIO2"
  direction: WR
- id: ASHP
  label: Audio Select HDMI1 PC
  kind: action
  params:
    - name: value
      type: integer
      description: "0=HDMI, 1=AUDIO1, 2=AUDIO2"
  direction: WR
- id: ASHA
  label: Audio Select HDMI1 AV
  kind: action
  params:
    - name: value
      type: integer
      description: "0=HDMI, 1=AUDIO1, 2=AUDIO2"
  direction: WR
- id: AH2P
  label: Audio Select HDMI2 PC
  kind: action
  params:
    - name: value
      type: integer
      description: "0=HDMI, 1=AUDIO1, 2=AUDIO2"
  direction: WR
- id: AH2A
  label: Audio Select HDMI2 AV
  kind: action
  params:
    - name: value
      type: integer
      description: "0=HDMI, 1=AUDIO1, 2=AUDIO2"
  direction: WR
- id: ASC2
  label: Audio Select D-SUB Component
  kind: action
  params:
    - name: value
      type: integer
      description: "1=AUDIO1, 2=AUDIO2"
  direction: WR
- id: ASV2
  label: Audio Select D-SUB Video
  kind: action
  params:
    - name: value
      type: integer
      description: "1=AUDIO1, 2=AUDIO2"
  direction: WR
- id: ASDI
  label: Audio Select DisplayPort
  kind: action
  params:
    - name: value
      type: integer
      description: "1=AUDIO1, 2=AUDIO2, 3=DisplayPort"
  direction: WR
- id: AOUT
  label: Audio Output
  kind: action
  params:
    - name: value
      type: integer
      description: "0=VARIABLE1, 1=FIXED, 2=VARIABLE2"
  direction: WR
- id: AIVP
  label: Audio Input Level1
  kind: action
  params:
    - name: value
      type: integer
      description: "0=1.0Vrms, 1=0.5Vrms"
  direction: WR
- id: AIV2
  label: Audio Input Level2
  kind: action
  params:
    - name: value
      type: integer
      description: "0=1.0Vrms, 1=0.5Vrms"
  direction: WR
- id: MONO
  label: Monaural Audio
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: CTLS
  label: RS-232C/LAN Select
  kind: action
  params:
    - name: value
      type: integer
      description: "0=RS-232C, 1=LAN"
  direction: WR
- id: BAUD
  label: Baud Rate
  kind: action
  params:
    - name: value
      type: integer
      description: "0=9600bps, 1=19200bps, 2=38400bps"
  direction: WR
- id: IDST
  label: ID No. Setting
  kind: action
  params:
    - name: value
      type: integer
      description: "0-255 (0=no ID)"
  direction: W
- id: IDSL
  label: ID No. Setting (Once)
  kind: action
  params:
    - name: value
      type: integer
      description: "1-255=set ID, 0=clear"
  direction: W
- id: IDLK
  label: ID No. Setting (Subsequent)
  kind: action
  params:
    - name: value
      type: integer
      description: "1-255=set ID, 0=clear"
  direction: W
- id: IDCK
  label: ID Check
  kind: action
  params:
    - name: value
      type: integer
      description: "0"
  direction: W
- id: IDDP
  label: ID Display
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON, 2=ON (4sec)"
  direction: W
- id: CPMD
  label: Setting Copy Mode
  kind: action
  params:
    - name: value
      type: integer
      description: "0=all monitors, 1-255=monitor with ID"
  direction: WR
- id: CPTG
  label: Setting Copy Target
  kind: action
  params:
    - name: value
      type: integer
      description: "0=PICTURE menu, 1=all settings"
  direction: WR

# MONITOR menu
- id: STDR
  label: Monitor Orientation
  kind: action
  params:
    - name: value
      type: integer
      description: "0=LANDSCAPE, 1=PORTRAIT"
  direction: WR
- id: OSDH
  label: OSD H-Position
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: OSDV
  label: OSD V-Position
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: STBM
  label: Standby Mode
  kind: action
  params:
    - name: value
      type: integer
      description: "0=STANDARD, 1=LOW POWER"
  direction: WR
- id: ATOF
  label: Off If No Operation
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: PODS
  label: Power On Delay Set
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: PWOD
  label: Power On Delay Interval
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1-60 seconds"
  direction: WR
- id: AADJ
  label: Self Adjust
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: AADD
  label: Self Adjust Start Timing
  kind: action
  params:
    - name: value
      type: integer
      description: "10-200 (1-20 seconds)"
  direction: WR

# MULTI/PIP menu
- id: ENLG
  label: Enlarge
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: EMAG
  label: Enlarge Mode
  kind: action
  params:
    - name: value
      type: integer
      description: "1=2x2, 2=3x3, 3=4x4, 4=5x5"
  direction: WR
- id: EMHV
  label: Enlarge H/V Setting
  kind: action
  params:
    - name: value
      type: integer
      description: "12(21)-55"
  direction: WR
- id: EPHV
  label: Image Position MxN
  kind: action
  params:
    - name: value
      type: integer
      description: "11-55"
  direction: WR
- id: EPOS
  label: Image Position
  kind: action
  params:
    - name: value
      type: integer
      description: "0-3 (2x2), 0-8 (3x3), 0-15 (4x4), 0-24 (5x5)"
  direction: WR
- id: EPSH
  label: Enlarged Screen H Position
  kind: action
  params:
    - name: value
      type: integer
      description: "-99-999"
  direction: WR
- id: EPSV
  label: Enlarged Screen V Position
  kind: action
  params:
    - name: value
      type: integer
      description: "-99-999"
  direction: WR
- id: BZCO
  label: Bezel Adjust
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: BZCT
  label: Bezel Top
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: BZCB
  label: Bezel Bottom
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: BZCR
  label: Bezel Right
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: BZCL
  label: Bezel Left
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: BZWT
  label: Bezel Width Top
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: BZWB
  label: Bezel Width Bottom
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: BZWR
  label: Bezel Width Right
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: BZWL
  label: Bezel Width Left
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: ESTG
  label: Enlarge/Image Position Setting
  kind: action
  params:
    - name: value
      type: string
      description: "XXYY format (EMAG+EPOS)"
  direction: WR
- id: ESHV
  label: Enlarge H/V Setting Write
  kind: action
  params:
    - name: value
      type: string
      description: "XXYY format (EMHV+EPHV)"
  direction: WR
- id: MWIN
  label: PIP Modes
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=PIP, 2=PbyP, 3=PbyP2"
  direction: WR
- id: MPSZ
  label: PIP Size
  kind: action
  params:
    - name: value
      type: integer
      description: "1-64"
  direction: WR
- id: MHPS
  label: PIP H Position
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: MVPS
  label: PIP V Position
  kind: action
  params:
    - name: value
      type: integer
      description: "0-100"
  direction: WR
- id: MPOS
  label: PIP Position Batch
  kind: action
  params:
    - name: value
      type: string
      description: "xxxyyy format (0-100,0-100)"
  direction: WR
- id: MWBL
  label: PIP Blend
  kind: action
  params:
    - name: value
      type: integer
      description: "0-15"
  direction: WR
- id: MWIP
  label: PIP Source
  kind: action
  params:
    - name: value
      type: integer
      description: "1=DVI-I, 2=D-SUB[RGB], 3=D-SUB[COMPONENT], 4=D-SUB[VIDEO], 9=HDMI1[AV], 10=HDMI1[PC], 12=HDMI2[AV], 13=HDMI2[PC], 14=DisplayPort"
  direction: WR
- id: MWAD
  label: Sound Change
  kind: action
  params:
    - name: value
      type: integer
      description: "1=MAIN, 2=SUB"
  direction: WR
- id: MWPP
  label: Main PIP Pos
  kind: action
  params:
    - name: value
      type: integer
      description: "0=POS1, 1=POS2"
  direction: WR
- id: MW2P
  label: PbyP2 Pos
  kind: action
  params:
    - name: value
      type: integer
      description: "0=POS1, 1=POS2, 2=POS3"
  direction: WR
- id: MOFF
  label: PIP Auto Off
  kind: action
  params:
    - name: value
      type: integer
      description: "0=MANUAL, 1=AUTO"
  direction: WR

# OTHERS menu
- id: SCSV
  label: Screen Motion Pattern
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1-4=PATTERN1-4"
  direction: WR
- id: MTIM
  label: Motion Time1
  kind: action
  params:
    - name: value
      type: integer
      description: "0-20"
  direction: WR
- id: MINT
  label: Motion Time2
  kind: action
  params:
    - name: value
      type: integer
      description: "10-990 (PATTERN1=per 10sec), 5-20 (PATTERN2-4=per sec)"
  direction: WR
- id: PMNG
  label: Power Management PC
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: PMAV
  label: Power Management AV
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: AINC
  label: Auto Input Change
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: BTSC
  label: Logo Screen
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON"
  direction: WR
- id: SCAN
  label: Scan Mode
  kind: action
  params:
    - name: value
      type: integer
      description: "0=MODE1, 1=MODE2, 2=MODE3"
  direction: WR
- id: CSYS
  label: Color System
  kind: action
  params:
    - name: value
      type: integer
      description: "0=AUTO, 1=PAL, 2=PAL-60, 3=SECAM, 4=NTSC3.58, 5=NTSC4.43"
  direction: WR
- id: WIDE
  label: Screen Size
  kind: action
  params:
    - name: value
      type: integer
      description: "1=WIDE, 2=NORMAL, 3=Dot by Dot, 4=ZOOM1, 5=ZOOM2"
  direction: WR

# FUNCTION menu
- id: RSET
  label: All Reset
  kind: action
  params:
    - name: value
      type: integer
      description: "0=ALL RESET 1, 1=ALL RESET 2"
  direction: W
- id: ALCK
  label: Adjustment Lock
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=ON1, 2=ON2"
  direction: WR
- id: ALTG
  label: Adjustment Lock Target
  kind: action
  params:
    - name: value
      type: integer
      description: "0=REMOTE, 1=BUTTONS, 2=BOTH"
  direction: WR
- id: LOSD
  label: OSD Display
  kind: action
  params:
    - name: value
      type: integer
      description: "0=ON1, 1=OFF, 2=ON2"
  direction: WR
- id: OFLD
  label: LED
  kind: action
  params:
    - name: value
      type: integer
      description: "0=ON, 1=OFF"
  direction: WR
- id: TALT
  label: Temperature Alert
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=OSD & LED, 2=LED"
  direction: WR
- id: PBTN
  label: Power Button
  kind: action
  params:
    - name: value
      type: integer
      description: "0=MONITOR, 1=CONTROLLER"
  direction: WR
- id: PCIP
  label: External Controller Input
  kind: action
  params:
    - name: value
      type: integer
      description: "0=D-SUB, 1=DisplayPort, 2=HDMI1, 3=HDMI2, 4=DVI-I"
  direction: WR
- id: SALT
  label: Status Alert
  kind: action
  params:
    - name: value
      type: integer
      description: "0=OFF, 1=OSD & LED, 2=LED"
  direction: WR

# INFORMATION
- id: INF1
  label: Model Info
  kind: query
  params: []
  direction: R
- id: SRNO
  label: Serial No
  kind: query
  params: []
  direction: R
- id: DSTA
  label: Temperature Sensor
  kind: query
  params: []
  direction: R
- id: ERRT
  label: Temperature Acquisition
  kind: query
  params: []
  direction: R
- id: STCA
  label: Cause Of Last Standby
  kind: action
  params:
    - name: value
      type: integer
      description: "0"
  direction: WR

# Gamma data transfer
- id: UGRW
  label: Red Gamma Data Write
  kind: action
  params:
    - name: value
      type: string
      description: "aaxxxx...xxxxcc format (aa=block 01-16, 32 data pieces, cc=checksum)"
  direction: W
- id: UGGW
  label: Green Gamma Data Write
  kind: action
  params:
    - name: value
      type: string
      description: "aaxxxx...xxxxcc format"
  direction: W
- id: UGBW
  label: Blue Gamma Data Write
  kind: action
  params:
    - name: value
      type: string
      description: "aaxxxx...xxxxcc format"
  direction: W
- id: UGRR
  label: Red Gamma Data Read
  kind: action
  params:
    - name: block
      type: integer
      description: "1-16"
  direction: W
- id: UGGR
  label: Green Gamma Data Read
  kind: action
  params:
    - name: block
      type: integer
      description: "1-16"
  direction: W
- id: UGBR
  label: Blue Gamma Data Read
  kind: action
  params:
    - name: block
      type: integer
      description: "1-16"
  direction: W
- id: UGRS
  label: User Data Initialize
  kind: action
  params:
    - name: value
      type: integer
      description: "0"
  direction: W
- id: UGSV
  label: User Data Save
  kind: action
  params:
    - name: value
      type: integer
      description: "0"
  direction: W
- id: CRST
  label: C.M.S. Reset
  kind: action
  params:
    - name: target
      type: integer
      description: "1=reset hue, 2=reset saturation, 3=reset brightness"
  direction: W

Feedbacks

# Command responses
- id: ok
  label: OK
  type: enum
  values:
    - ok
    - "ERR"
    - "WAIT"
    - "LOCKED"
    - "UNSELECTED"
  description: "OK=success, ERR=command invalid or cannot execute in current state, WAIT=command processing, LOCKED=RS-232C locked, UNSELECTED=RS-232C/LAN SELECT set to LAN"

# Power state read (POWR R direction)
- id: power_state
  label: Power State
  type: enum
  values:
    - "0"
    - "1"
    - "2"
  description: "0=standby, 1=normal, 2=input signal waiting"

# Input state read (INPS R direction)
- id: input_state
  label: Input State
  type: enum
  values:
    - "1"
    - "2"
    - "3"
    - "4"
    - "9"
    - "10"
    - "12"
    - "13"
    - "14"
  description: "1=DVI-I, 2=D-SUB[RGB], 3=D-SUB[COMPONENT], 4=D-SUB[VIDEO], 9=HDMI1[AV], 10=HDMI1[PC], 12=HDMI2[AV], 13=HDMI2[PC], 14=DisplayPort"

# Temperature status (DSTA)
- id: temperature_status
  label: Temperature Status
  type: enum
  values:
    - "0"
    - "1"
    - "2"
    - "3"
    - "4"
  description: "0=normal, 1=abnormal standby, 2=abnormal (main power off to clear), 3=abnormal dimmed, 4=sensor abnormal"

# Standby cause (STCA)
- id: standby_cause
  label: Standby Cause
  type: enum
  values:
    - "0"
    - "1"
    - "2"
    - "3"
    - "4"
    - "6"
    - "8"
    - "20"
  description: "0=no error, 1=POWER button, 2=main power switch, 3=RS-232C/LAN, 4=no signal, 6=abnormal temp, 8=schedule, 20=OFF IF NO OPERATION"

Variables

# All WR commands can be read via R direction (query with ? parameter)
# See Actions section for parameter ranges

Events

# UNRESOLVED: no unsolicited event notifications documented

Macros

# UNRESOLVED: no multi-step macros documented

Safety

confirmation_required_for:
  - RSET (ALL RESET) # timeout must be 30+ seconds
interlocks:
  - POWR timeout when POWER ON DELAY active: set to DELAY period + 10 seconds minimum
  - Daisy chain multi-monitor: timeout >= monitor position from PC × 10 seconds
# No safety warnings found in source beyond timing requirements

Notes

RS-232C and LAN mutually exclusive — switch via CTLS command
Command format: 4-char command + 4-char parameter (space-padded if needed)
Parameter must be exactly 4 chars; negative values use 3 digits (e.g., AUTR-005)
Query: append ? to command field (e.g., VOLM ????)
Response interval: 100ms minimum between commands
Daisy chain: up to 25 monitors, all must share same baud rate
LAN auth: username + password required (source: LAN control section with login sequence)
Repeater control: append + to 4th char of parameter for broadcast to all monitors
Factory preset IP: 192.168.150.2 (DHCP CLIENT OFF condition)
LAN data port range: 1025-65535 (actual port number not stated in source)
SEARCH port range: 1025-65535 (actual port number not stated in source)

Provenance

source_domains:
  - business.sharpusa.com
source_urls:
  - https://business.sharpusa.com/Portals/0/downloads/Manuals/PN_E603_703_Operation_Manual.pdf
retrieved_at: 2026-05-13T20:34:55.553Z
last_checked_at: 2026-06-10T00:48:02.188Z

Verification Summary

verdict: verified
checked_at: 2026-06-10T00:48:02.188Z
matched_actions: 196
action_count: 196
confidence: medium
summary: "All 196 spec actions matched literally in source; transport parameters verified; complete bidirectional coverage. (8 unresolved item(s) noted in Known Gaps.)"

Known Gaps

- "DHCP client behavior, LAN port number not stated in source"
- "TCP port number not stated in source (factory preset IP: 192.168.150.2)"
- "no unsolicited event notifications documented"
- "no multi-step macros documented"
- "LAN TCP port number not stated in source"
- "firmware version not stated in source"
- "gamma data transfer read responses not documented in detail"
- "repeater control response format for multi-monitor reads not fully specified"

From the AI4AV catalog (https://ai4av.net) · ODbL-1.0

Transport

protocols: - serial - tcp serial: baud_rate: 9600 # also supports 19200, 38400 - source states BAUD RATE setting data_bits: 8 parity: none stop_bits: 1 flow_control: none addressing: # UNRESOLVED: TCP port number not stated in source (factory preset IP: 192.168.150.2) auth: type: none # inferred: RS-232C has no auth procedure in source # Note: LAN control requires username/password - see Notes

# powerable: POWR command present # routable: INPS command present # queryable: multiple R-direction commands present # levelable: VOLM, VLMP, CONT, BLVL, TINT, COLR, SHRP, TREBLE, BASS, BALANCE present

Actions

# Power control - id: POWR label: Power Control kind: action params: - name: state type: integer description: "0=standby, 1=normal" direction: W # Input mode selection - id: INPS label: Input Mode Selection kind: action params: - name: input type: integer description: "1=DVI-I, 2=D-SUB[RGB], 3=D-SUB[COMPONENT], 4=D-SUB[VIDEO], 9=HDMI1[AV], 10=HDMI1[PC], 12=HDMI2[AV], 13=HDMI2[PC], 14=DisplayPort" direction: W # SCREEN menu - id: ASNC label: Auto Adjust kind: action params: - name: value type: integer description: "1=execute" direction: W - id: CLCK label: Clock kind: action params: - name: value type: integer description: "0-1200" direction: WR - id: PHSE label: Phase kind: action params: - name: value type: integer description: "0-63" direction: WR - id: HPOS label: H Position kind: action params: - name: value type: integer description: "0-100" direction: WR - id: VPOS label: V Position kind: action params: - name: value type: integer description: "0-100" direction: WR - id: HSIZ label: H Size kind: action params: - name: value type: integer description: "0-100" direction: WR - id: VSIZ label: V Size kind: action params: - name: value type: integer description: "0-100" direction: WR - id: HRES label: H Resolution kind: action params: - name: value type: integer description: "300-1920" direction: WR - id: VRES label: V Resolution kind: action params: - name: value type: integer description: "200-1200" direction: WR - id: PXCK label: Resolution Check kind: query params: [] direction: R - id: PXSL label: Pixel Setting kind: action params: - name: mode type: integer description: "1-10" direction: WR - id: RESO label: Resolution Check (AV) kind: query params: [] direction: R - id: Z2SP label: Zoom2 Special Setting kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: ARST label: Reset kind: action params: - name: value type: integer description: "1=SCREEN reset, 2=PICTURE reset, 3=AUDIO reset" direction: W # PICTURE menu - id: VLMP label: Bright kind: action params: - name: value type: integer description: "0-31" direction: WR - id: CONT label: Contrast kind: action params: - name: value type: integer description: "0-60" direction: WR - id: BLVL label: Black Level kind: action params: - name: value type: integer description: "0-60" direction: WR - id: TINT label: Tint kind: action params: - name: value type: integer description: "0-60" direction: WR - id: COLR label: Colors kind: action params: - name: value type: integer description: "0-60" direction: WR - id: SHRP label: Sharpness kind: action params: - name: value type: integer description: "0-24" direction: WR - id: BMOD label: Color Mode kind: action params: - name: value type: integer description: "0=STD, 2=VIVID, 3=sRGB, 4=HIGH ILLUMINANCE" direction: WR - id: CTMP label: Color Temp kind: action params: - name: value type: integer description: "0=PC, 1-28=preset, 99=USER" direction: WR - id: CRTR label: R-Contrast kind: action params: - name: value type: integer description: "0-256" direction: WR - id: CRTG label: G-Contrast kind: action params: - name: value type: integer description: "0-256" direction: WR - id: CRTB label: B-Contrast kind: action params: - name: value type: integer description: "0-256" direction: WR - id: OFSR label: R-Offset kind: action params: - name: value type: integer description: "-127-127" direction: WR - id: OFSG label: G-Offset kind: action params: - name: value type: integer description: "-127-127" direction: WR - id: OFSB label: B-Offset kind: action params: - name: value type: integer description: "-127-127" direction: WR - id: CPTU label: Copy To User kind: action params: - name: value type: integer description: "0=execute" direction: W - id: GAMM label: Gamma kind: action params: - name: value type: integer description: "0-6" direction: WR - id: FLES label: Flesh Tone kind: action params: - name: value type: integer description: "0=OFF, 1=LOW, 2=HIGH" direction: WR - id: CMHR label: C.M.S.-Hue R kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMHY label: C.M.S.-Hue Y kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMHG label: C.M.S.-Hue G kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMHC label: C.M.S.-Hue C kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMHB label: C.M.S.-Hue B kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMHM label: C.M.S.-Hue M kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMSR label: C.M.S.-Saturation R kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMSY label: C.M.S.-Saturation Y kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMSG label: C.M.S.-Saturation G kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMSC label: C.M.S.-Saturation C kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMSB label: C.M.S.-Saturation B kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMSM label: C.M.S.-Saturation M kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMVR label: C.M.S.-Value R kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMVY label: C.M.S.-Value Y kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMVG label: C.M.S.-Value G kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMVC label: C.M.S.-Value C kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMVB label: C.M.S.-Value B kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: CMVM label: C.M.S.-Value M kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: AGIN label: Advanced Auto kind: action params: - name: value type: integer description: "1=execute" direction: W - id: ANGA label: Analog Gain kind: action params: - name: value type: integer description: "0-127" direction: WR - id: ANOF label: Analog Offset kind: action params: - name: value type: integer description: "0-127" direction: WR - id: TDNR label: 3D-NR kind: action params: - name: value type: integer description: "0=OFF, 1=LOW, 2=HIGH" direction: WR - id: MPNR label: MPEG-NR kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: YCSP label: 3D-Y/C kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: AHDR label: RGB Input Range HDMI1[AV] kind: action params: - name: value type: integer description: "0=AUTO, 1=FULL, 2=LIMITED" direction: WR - id: PHDR label: RGB Input Range HDMI1[PC] kind: action params: - name: value type: integer description: "0=AUTO, 1=FULL, 2=LIMITED" direction: WR - id: AH2R label: RGB Input Range HDMI2[AV] kind: action params: - name: value type: integer description: "0=AUTO, 1=FULL, 2=LIMITED" direction: WR - id: PH2R label: RGB Input Range HDMI2[PC] kind: action params: - name: value type: integer description: "0=AUTO, 1=FULL, 2=LIMITED" direction: WR - id: PDVR label: RGB Input Range DVI-I kind: action params: - name: value type: integer description: "1=FULL, 2=LIMITED" direction: WR - id: PDSR label: RGB Input Range D-SUB kind: action params: - name: value type: integer description: "1=FULL, 2=LIMITED" direction: WR - id: PDPR label: RGB Input Range DisplayPort kind: action params: - name: value type: integer description: "0=AUTO, 1=FULL, 2=LIMITED" direction: WR - id: ACNT label: Active Contrast kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: PTDF label: Display Color Pattern kind: action params: - name: value type: integer description: "0=none, 1=white, 2=red, 3=green, 4=blue, 99=RGB mixed" direction: WR - id: PTDR label: Display Color Pattern R kind: action params: - name: value type: integer description: "0-15" direction: WR - id: PTDG label: Display Color Pattern G kind: action params: - name: value type: integer description: "0-15" direction: WR - id: PTDB label: Display Color Pattern B kind: action params: - name: value type: integer description: "0-15" direction: WR # AUDIO menu - id: AUTR label: Treble kind: action params: - name: value type: integer description: "-5-5" direction: WR - id: AUBS label: Bass kind: action params: - name: value type: integer description: "-5-5" direction: WR - id: AUBL label: Balance kind: action params: - name: value type: integer description: "-10-10" direction: WR - id: VOLM label: Volume kind: action params: - name: value type: integer description: "0-31" direction: WR - id: MUTE label: Mute kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR # SETUP menu - id: DATE label: Date/Time Setting kind: action params: - name: value type: string description: "AABBCCDDEE format (Year/Month/Day/Hour/Minute)" direction: WR - id: DTFT label: Date Display Format kind: action params: - name: value type: integer description: "0=YYYY/MM/DD, 1=MM/DD/YYYY, 2=DD/MM/YYYY" direction: WR - id: TMFT label: Time Display Format kind: action params: - name: value type: integer description: "0=24-hour, 1=12-hour" direction: WR - id: SC01 label: Schedule 1 kind: action params: - name: value type: string description: "ABCDEFFGGH format" direction: WR - id: SC02 label: Schedule 2 kind: action params: - name: value type: string description: "ABCDEFFGGH format" direction: WR - id: SC03 label: Schedule 3 kind: action params: - name: value type: string description: "ABCDEFFGGH format" direction: WR - id: SC04 label: Schedule 4 kind: action params: - name: value type: string description: "ABCDEFFGGH format" direction: WR - id: SC05 label: Schedule 5 kind: action params: - name: value type: string description: "ABCDEFFGGH format" direction: WR - id: SC06 label: Schedule 6 kind: action params: - name: value type: string description: "ABCDEFFGGH format" direction: WR - id: SC07 label: Schedule 7 kind: action params: - name: value type: string description: "ABCDEFFGGH format" direction: WR - id: SC08 label: Schedule 8 kind: action params: - name: value type: string description: "ABCDEFFGGH format" direction: WR - id: SB01 label: Schedule Brightness 1 kind: action params: - name: value type: integer description: "0-31 or 99=disable" direction: WR - id: SB02 label: Schedule Brightness 2 kind: action params: - name: value type: integer description: "0-31 or 99=disable" direction: WR - id: SB03 label: Schedule Brightness 3 kind: action params: - name: value type: integer description: "0-31 or 99=disable" direction: WR - id: SB04 label: Schedule Brightness 4 kind: action params: - name: value type: integer description: "0-31 or 99=disable" direction: WR - id: SB05 label: Schedule Brightness 5 kind: action params: - name: value type: integer description: "0-31 or 99=disable" direction: WR - id: SB06 label: Schedule Brightness 6 kind: action params: - name: value type: integer description: "0-31 or 99=disable" direction: WR - id: SB07 label: Schedule Brightness 7 kind: action params: - name: value type: integer description: "0-31 or 99=disable" direction: WR - id: SB08 label: Schedule Brightness 8 kind: action params: - name: value type: integer description: "0-31 or 99=disable" direction: WR - id: LANG label: Language kind: action params: - name: value type: integer description: "0=ENGLISH, 1=DEUTSCH, 2=FRANCAIS, 3=ITALIANO, 4=ESPANOL, 5=РУССКИЙ, 6=additional" direction: WR - id: HDSL label: HDMI1 Input Select kind: action params: - name: value type: integer description: "0=PC, 1=AV" direction: WR - id: H2SL label: HDMI2 Input Select kind: action params: - name: value type: integer description: "0=PC, 1=AV" direction: WR - id: SLDS label: D-SUB Input Select kind: action params: - name: value type: integer description: "0=RGB, 1=COMPONENT, 2=VIDEO" direction: WR - id: HDAW label: HDMI1 Auto View kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: H2AW label: HDMI2 Auto View kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: HPCT label: Hot Plug Control DVI-I kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: HPCH label: Hot Plug Control HDMI1 kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: HPH2 label: Hot Plug Control HDMI2 kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: DVED label: EDID Select DVI-I kind: action params: - name: value type: integer description: "0=AUTO, 1=DIGITAL, 2=ANALOG" direction: WR - id: ASDP label: Audio Select DVI-I kind: action params: - name: value type: integer description: "1=AUDIO1, 2=AUDIO2" direction: WR - id: ASAP label: Audio Select D-SUB RGB kind: action params: - name: value type: integer description: "1=AUDIO1, 2=AUDIO2" direction: WR - id: ASHP label: Audio Select HDMI1 PC kind: action params: - name: value type: integer description: "0=HDMI, 1=AUDIO1, 2=AUDIO2" direction: WR - id: ASHA label: Audio Select HDMI1 AV kind: action params: - name: value type: integer description: "0=HDMI, 1=AUDIO1, 2=AUDIO2" direction: WR - id: AH2P label: Audio Select HDMI2 PC kind: action params: - name: value type: integer description: "0=HDMI, 1=AUDIO1, 2=AUDIO2" direction: WR - id: AH2A label: Audio Select HDMI2 AV kind: action params: - name: value type: integer description: "0=HDMI, 1=AUDIO1, 2=AUDIO2" direction: WR - id: ASC2 label: Audio Select D-SUB Component kind: action params: - name: value type: integer description: "1=AUDIO1, 2=AUDIO2" direction: WR - id: ASV2 label: Audio Select D-SUB Video kind: action params: - name: value type: integer description: "1=AUDIO1, 2=AUDIO2" direction: WR - id: ASDI label: Audio Select DisplayPort kind: action params: - name: value type: integer description: "1=AUDIO1, 2=AUDIO2, 3=DisplayPort" direction: WR - id: AOUT label: Audio Output kind: action params: - name: value type: integer description: "0=VARIABLE1, 1=FIXED, 2=VARIABLE2" direction: WR - id: AIVP label: Audio Input Level1 kind: action params: - name: value type: integer description: "0=1.0Vrms, 1=0.5Vrms" direction: WR - id: AIV2 label: Audio Input Level2 kind: action params: - name: value type: integer description: "0=1.0Vrms, 1=0.5Vrms" direction: WR - id: MONO label: Monaural Audio kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: CTLS label: RS-232C/LAN Select kind: action params: - name: value type: integer description: "0=RS-232C, 1=LAN" direction: WR - id: BAUD label: Baud Rate kind: action params: - name: value type: integer description: "0=9600bps, 1=19200bps, 2=38400bps" direction: WR - id: IDST label: ID No. Setting kind: action params: - name: value type: integer description: "0-255 (0=no ID)" direction: W - id: IDSL label: ID No. Setting (Once) kind: action params: - name: value type: integer description: "1-255=set ID, 0=clear" direction: W - id: IDLK label: ID No. Setting (Subsequent) kind: action params: - name: value type: integer description: "1-255=set ID, 0=clear" direction: W - id: IDCK label: ID Check kind: action params: - name: value type: integer description: "0" direction: W - id: IDDP label: ID Display kind: action params: - name: value type: integer description: "0=OFF, 1=ON, 2=ON (4sec)" direction: W - id: CPMD label: Setting Copy Mode kind: action params: - name: value type: integer description: "0=all monitors, 1-255=monitor with ID" direction: WR - id: CPTG label: Setting Copy Target kind: action params: - name: value type: integer description: "0=PICTURE menu, 1=all settings" direction: WR # MONITOR menu - id: STDR label: Monitor Orientation kind: action params: - name: value type: integer description: "0=LANDSCAPE, 1=PORTRAIT" direction: WR - id: OSDH label: OSD H-Position kind: action params: - name: value type: integer description: "0-100" direction: WR - id: OSDV label: OSD V-Position kind: action params: - name: value type: integer description: "0-100" direction: WR - id: STBM label: Standby Mode kind: action params: - name: value type: integer description: "0=STANDARD, 1=LOW POWER" direction: WR - id: ATOF label: Off If No Operation kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: PODS label: Power On Delay Set kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: PWOD label: Power On Delay Interval kind: action params: - name: value type: integer description: "0=OFF, 1-60 seconds" direction: WR - id: AADJ label: Self Adjust kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: AADD label: Self Adjust Start Timing kind: action params: - name: value type: integer description: "10-200 (1-20 seconds)" direction: WR # MULTI/PIP menu - id: ENLG label: Enlarge kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: EMAG label: Enlarge Mode kind: action params: - name: value type: integer description: "1=2x2, 2=3x3, 3=4x4, 4=5x5" direction: WR - id: EMHV label: Enlarge H/V Setting kind: action params: - name: value type: integer description: "12(21)-55" direction: WR - id: EPHV label: Image Position MxN kind: action params: - name: value type: integer description: "11-55" direction: WR - id: EPOS label: Image Position kind: action params: - name: value type: integer description: "0-3 (2x2), 0-8 (3x3), 0-15 (4x4), 0-24 (5x5)" direction: WR - id: EPSH label: Enlarged Screen H Position kind: action params: - name: value type: integer description: "-99-999" direction: WR - id: EPSV label: Enlarged Screen V Position kind: action params: - name: value type: integer description: "-99-999" direction: WR - id: BZCO label: Bezel Adjust kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: BZCT label: Bezel Top kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: BZCB label: Bezel Bottom kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: BZCR label: Bezel Right kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: BZCL label: Bezel Left kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: BZWT label: Bezel Width Top kind: action params: - name: value type: integer description: "0-100" direction: WR - id: BZWB label: Bezel Width Bottom kind: action params: - name: value type: integer description: "0-100" direction: WR - id: BZWR label: Bezel Width Right kind: action params: - name: value type: integer description: "0-100" direction: WR - id: BZWL label: Bezel Width Left kind: action params: - name: value type: integer description: "0-100" direction: WR - id: ESTG label: Enlarge/Image Position Setting kind: action params: - name: value type: string description: "XXYY format (EMAG+EPOS)" direction: WR - id: ESHV label: Enlarge H/V Setting Write kind: action params: - name: value type: string description: "XXYY format (EMHV+EPHV)" direction: WR - id: MWIN label: PIP Modes kind: action params: - name: value type: integer description: "0=OFF, 1=PIP, 2=PbyP, 3=PbyP2" direction: WR - id: MPSZ label: PIP Size kind: action params: - name: value type: integer description: "1-64" direction: WR - id: MHPS label: PIP H Position kind: action params: - name: value type: integer description: "0-100" direction: WR - id: MVPS label: PIP V Position kind: action params: - name: value type: integer description: "0-100" direction: WR - id: MPOS label: PIP Position Batch kind: action params: - name: value type: string description: "xxxyyy format (0-100,0-100)" direction: WR - id: MWBL label: PIP Blend kind: action params: - name: value type: integer description: "0-15" direction: WR - id: MWIP label: PIP Source kind: action params: - name: value type: integer description: "1=DVI-I, 2=D-SUB[RGB], 3=D-SUB[COMPONENT], 4=D-SUB[VIDEO], 9=HDMI1[AV], 10=HDMI1[PC], 12=HDMI2[AV], 13=HDMI2[PC], 14=DisplayPort" direction: WR - id: MWAD label: Sound Change kind: action params: - name: value type: integer description: "1=MAIN, 2=SUB" direction: WR - id: MWPP label: Main PIP Pos kind: action params: - name: value type: integer description: "0=POS1, 1=POS2" direction: WR - id: MW2P label: PbyP2 Pos kind: action params: - name: value type: integer description: "0=POS1, 1=POS2, 2=POS3" direction: WR - id: MOFF label: PIP Auto Off kind: action params: - name: value type: integer description: "0=MANUAL, 1=AUTO" direction: WR # OTHERS menu - id: SCSV label: Screen Motion Pattern kind: action params: - name: value type: integer description: "0=OFF, 1-4=PATTERN1-4" direction: WR - id: MTIM label: Motion Time1 kind: action params: - name: value type: integer description: "0-20" direction: WR - id: MINT label: Motion Time2 kind: action params: - name: value type: integer description: "10-990 (PATTERN1=per 10sec), 5-20 (PATTERN2-4=per sec)" direction: WR - id: PMNG label: Power Management PC kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: PMAV label: Power Management AV kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: AINC label: Auto Input Change kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: BTSC label: Logo Screen kind: action params: - name: value type: integer description: "0=OFF, 1=ON" direction: WR - id: SCAN label: Scan Mode kind: action params: - name: value type: integer description: "0=MODE1, 1=MODE2, 2=MODE3" direction: WR - id: CSYS label: Color System kind: action params: - name: value type: integer description: "0=AUTO, 1=PAL, 2=PAL-60, 3=SECAM, 4=NTSC3.58, 5=NTSC4.43" direction: WR - id: WIDE label: Screen Size kind: action params: - name: value type: integer description: "1=WIDE, 2=NORMAL, 3=Dot by Dot, 4=ZOOM1, 5=ZOOM2" direction: WR # FUNCTION menu - id: RSET label: All Reset kind: action params: - name: value type: integer description: "0=ALL RESET 1, 1=ALL RESET 2" direction: W - id: ALCK label: Adjustment Lock kind: action params: - name: value type: integer description: "0=OFF, 1=ON1, 2=ON2" direction: WR - id: ALTG label: Adjustment Lock Target kind: action params: - name: value type: integer description: "0=REMOTE, 1=BUTTONS, 2=BOTH" direction: WR - id: LOSD label: OSD Display kind: action params: - name: value type: integer description: "0=ON1, 1=OFF, 2=ON2" direction: WR - id: OFLD label: LED kind: action params: - name: value type: integer description: "0=ON, 1=OFF" direction: WR - id: TALT label: Temperature Alert kind: action params: - name: value type: integer description: "0=OFF, 1=OSD & LED, 2=LED" direction: WR - id: PBTN label: Power Button kind: action params: - name: value type: integer description: "0=MONITOR, 1=CONTROLLER" direction: WR - id: PCIP label: External Controller Input kind: action params: - name: value type: integer description: "0=D-SUB, 1=DisplayPort, 2=HDMI1, 3=HDMI2, 4=DVI-I" direction: WR - id: SALT label: Status Alert kind: action params: - name: value type: integer description: "0=OFF, 1=OSD & LED, 2=LED" direction: WR # INFORMATION - id: INF1 label: Model Info kind: query params: [] direction: R - id: SRNO label: Serial No kind: query params: [] direction: R - id: DSTA label: Temperature Sensor kind: query params: [] direction: R - id: ERRT label: Temperature Acquisition kind: query params: [] direction: R - id: STCA label: Cause Of Last Standby kind: action params: - name: value type: integer description: "0" direction: WR # Gamma data transfer - id: UGRW label: Red Gamma Data Write kind: action params: - name: value type: string description: "aaxxxx...xxxxcc format (aa=block 01-16, 32 data pieces, cc=checksum)" direction: W - id: UGGW label: Green Gamma Data Write kind: action params: - name: value type: string description: "aaxxxx...xxxxcc format" direction: W - id: UGBW label: Blue Gamma Data Write kind: action params: - name: value type: string description: "aaxxxx...xxxxcc format" direction: W - id: UGRR label: Red Gamma Data Read kind: action params: - name: block type: integer description: "1-16" direction: W - id: UGGR label: Green Gamma Data Read kind: action params: - name: block type: integer description: "1-16" direction: W - id: UGBR label: Blue Gamma Data Read kind: action params: - name: block type: integer description: "1-16" direction: W - id: UGRS label: User Data Initialize kind: action params: - name: value type: integer description: "0" direction: W - id: UGSV label: User Data Save kind: action params: - name: value type: integer description: "0" direction: W - id: CRST label: C.M.S. Reset kind: action params: - name: target type: integer description: "1=reset hue, 2=reset saturation, 3=reset brightness" direction: W

Feedbacks

# Command responses - id: ok label: OK type: enum values: - ok - "ERR" - "WAIT" - "LOCKED" - "UNSELECTED" description: "OK=success, ERR=command invalid or cannot execute in current state, WAIT=command processing, LOCKED=RS-232C locked, UNSELECTED=RS-232C/LAN SELECT set to LAN" # Power state read (POWR R direction) - id: power_state label: Power State type: enum values: - "0" - "1" - "2" description: "0=standby, 1=normal, 2=input signal waiting" # Input state read (INPS R direction) - id: input_state label: Input State type: enum values: - "1" - "2" - "3" - "4" - "9" - "10" - "12" - "13" - "14" description: "1=DVI-I, 2=D-SUB[RGB], 3=D-SUB[COMPONENT], 4=D-SUB[VIDEO], 9=HDMI1[AV], 10=HDMI1[PC], 12=HDMI2[AV], 13=HDMI2[PC], 14=DisplayPort" # Temperature status (DSTA) - id: temperature_status label: Temperature Status type: enum values: - "0" - "1" - "2" - "3" - "4" description: "0=normal, 1=abnormal standby, 2=abnormal (main power off to clear), 3=abnormal dimmed, 4=sensor abnormal" # Standby cause (STCA) - id: standby_cause label: Standby Cause type: enum values: - "0" - "1" - "2" - "3" - "4" - "6" - "8" - "20" description: "0=no error, 1=POWER button, 2=main power switch, 3=RS-232C/LAN, 4=no signal, 6=abnormal temp, 8=schedule, 20=OFF IF NO OPERATION"

Safety

confirmation_required_for: - RSET (ALL RESET) # timeout must be 30+ seconds interlocks: - POWR timeout when POWER ON DELAY active: set to DELAY period + 10 seconds minimum - Daisy chain multi-monitor: timeout >= monitor position from PC × 10 seconds # No safety warnings found in source beyond timing requirements

Notes

RS-232C and LAN mutually exclusive — switch via CTLS command

Command format: 4-char command + 4-char parameter (space-padded if needed)

Parameter must be exactly 4 chars; negative values use 3 digits (e.g., AUTR-005)

Query: append ? to command field (e.g., VOLM ????)

Response interval: 100ms minimum between commands

Daisy chain: up to 25 monitors, all must share same baud rate

LAN auth: username + password required (source: LAN control section with login sequence)

Repeater control: append + to 4th char of parameter for broadcast to all monitors

Factory preset IP: 192.168.150.2 (DHCP CLIENT OFF condition)

LAN data port range: 1025-65535 (actual port number not stated in source)

SEARCH port range: 1025-65535 (actual port number not stated in source)

source_domains: - business.sharpusa.com source_urls: - https://business.sharpusa.com/Portals/0/downloads/Manuals/PN_E603_703_Operation_Manual.pdf retrieved_at: 2026-05-13T20:34:55.553Z last_checked_at: 2026-06-10T00:48:02.188Z

verdict: verified checked_at: 2026-06-10T00:48:02.188Z matched_actions: 196 action_count: 196 confidence: medium summary: "All 196 spec actions matched literally in source; transport parameters verified; complete bidirectional coverage. (8 unresolved item(s) noted in Known Gaps.)"

Known Gaps

- "DHCP client behavior, LAN port number not stated in source" - "TCP port number not stated in source (factory preset IP: 192.168.150.2)" - "no unsolicited event notifications documented" - "no multi-step macros documented" - "LAN TCP port number not stated in source" - "firmware version not stated in source" - "gamma data transfer read responses not documented in detail" - "repeater control response format for multi-monitor reads not fully specified"

From the AI4AV catalog (https://ai4av.net) · ODbL-1.0

Sharp PN E603 E703 Control Spec

Compatible models

Summary

Transport

Traits

Actions

Feedbacks

Variables

Events

Macros

Safety

Notes

Provenance

Verification Summary

Known Gaps

Source & contribution

Sharp PN E603 E703 Control Spec

Compatible models

Summary

Transport

Traits

Actions

Feedbacks

Variables

Events

Macros

Safety

Notes

Provenance

Verification Summary

Known Gaps

Source & contribution