Sharp PN-E Series RS-232 / IP control commands

Summary

Sharp PN-E Series large-format LCD monitors (source explicitly references PN-E421; series also includes PN-E471/E521/E601) controlled via RS-232C with a 4-character command + 4-character parameter ASCII protocol, supporting daisy-chain control of up to 25 monitors with ID addressing. LAN control is available when the optional PN-ZB01 board is attached, configured via web browser (Internet Explorer); RS-232C and LAN cannot be used simultaneously. This spec covers the full RS-232C command table from the operation manual.

Transport

protocols:
  - serial
  - http  # inferred: LAN control via web browser (Internet Explorer) mentioned in source; requires optional PN-ZB01
serial:
  baud_rate: 9600  # initial setting; settable to 9600/19200/38400 via BAUD command
  data_bits: 8
  parity: none
  stop_bits: 1
  flow_control: none
addressing:
  base_url: null  # UNRESOLVED: no URL/path pattern stated in source
  port: null  # UNRESOLVED: port number not stated in source
auth:
  type: none  # inferred: no auth procedure in source

Traits

# - powerable    (POWR standby/on command present)
# - queryable    (R-direction queries: POWR?, VOLM?, INF1, SRNO, DSTA, ERRT, STCA, PXCK, RESO, etc.)
# - routable     (INPS input mode selection commands present)
# - levelable    (VOLM, CONT, BLVL, VLMP, etc. level commands present)
- powerable
- queryable
- routable
- levelable

Actions

# Command format: 4-char command field + 4-char parameter field, terminated by return code (0DH or 0AH).
# Parameter MUST be exactly 4 characters, padded with spaces. Negative values as 3 digits (e.g. AUTR-009).
# Query (R-direction): send "????" as parameter (e.g. VOLM????). Repeater control: 4th parameter char "+".
# W = set, R = readable via ???? query, WR = both.
- id: power_set
  label: Power Control
  kind: action
  command: "POWR{state}"
  params:
    - name: state
      type: integer
      description: "W: 0 = switch to standby mode, 1 = return from standby. R (POWR????): 0 = standby mode, 1 = normal mode, 2 = input signal waiting mode"
- id: input_mode_select
  label: Input Mode Selection
  kind: action
  command: "INPS{input}"
  params:
    - name: input
      type: integer
      description: "W: 0 = toggle, 1 = PC DVI-D, 2 = PC D-SUB, 3 = AV COMPONENT, 4 = AV VIDEO, 6 = PC RGB, 7 = AV DVI-D, 8 = AV S-VIDEO, 9 = AV HDMI, 10 = PC HDMI. R returns same codes 1-10. Some selections return ERR depending on INPUT SELECT settings"
- id: screen_auto_adjust
  label: Screen Auto Adjust
  kind: action
  command: "ASNC0001"
  params: []
  # AUTO (SCREEN menu); when input mode is PC D-SUB or PC RGB; returns WAIT
- id: clock_set
  label: Clock
  kind: action
  command: "CLCK{value}"
  params:
    - name: value
      type: integer
      description: "0-1200; PC D-SUB/PC RGB only; varies depending on signal; query via CLCK????"
- id: phase_set
  label: Phase
  kind: action
  command: "PHSE{value}"
  params:
    - name: value
      type: integer
      description: "0-63; PC D-SUB/PC RGB only; query via PHSE????"
- id: h_position_set
  label: H-Position
  kind: action
  command: "HPOS{value}"
  params:
    - name: value
      type: integer
      description: "0-100 (0-800 on PC D-SUB/PC RGB); query via HPOS????"
- id: v_position_set
  label: V-Position
  kind: action
  command: "VPOS{value}"
  params:
    - name: value
      type: integer
      description: "0-100 (0-200 on PC D-SUB/PC RGB); query via VPOS????"
- id: h_size_set
  label: H-Size
  kind: action
  command: "HSIZ{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via HSIZ????"
- id: v_size_set
  label: V-Size
  kind: action
  command: "VSIZ{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via VSIZ????"
- id: h_resolution_set
  label: H-Resolution
  kind: action
  command: "HRES{value}"
  params:
    - name: value
      type: integer
      description: "300-1920, only even numbers valid; PC D-SUB/PC RGB only; query via HRES????"
- id: v_resolution_set
  label: V-Resolution
  kind: action
  command: "VRES{value}"
  params:
    - name: value
      type: integer
      description: "200-1200, only even numbers valid; query via VRES????"
- id: screen_reset
  label: Screen/Picture/Audio Reset
  kind: action
  command: "ARST{value}"
  params:
    - name: value
      type: integer
      description: "1 = SCREEN menu reset, 2 = PICTURE menu reset, 3 = AUDIO menu reset"
- id: picture_auto_adjust
  label: Picture Auto Adjust
  kind: action
  command: "AGIN0001"
  params: []
  # AUTO (PICTURE menu); PC D-SUB/PC RGB only; returns WAIT
- id: contrast_set
  label: Contrast
  kind: action
  command: "CONT{value}"
  params:
    - name: value
      type: integer
      description: "0-60 (0-127 on PC D-SUB/PC RGB); query via CONT????"
- id: black_level_set
  label: Black Level
  kind: action
  command: "BLVL{value}"
  params:
    - name: value
      type: integer
      description: "0-60 (0-127 on PC D-SUB/PC RGB); query via BLVL????"
- id: tint_set
  label: Tint
  kind: action
  command: "TINT{value}"
  params:
    - name: value
      type: integer
      description: "0-60; query via TINT????"
- id: color_set
  label: Colors
  kind: action
  command: "COLR{value}"
  params:
    - name: value
      type: integer
      description: "0-60; query via COLR????"
- id: sharpness_set
  label: Sharpness
  kind: action
  command: "SHRP{value}"
  params:
    - name: value
      type: integer
      description: "0-24; query via SHRP????"
- id: flesh_tone_set
  label: Flesh Tone
  kind: action
  command: "FLES{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: LOW, 2: HIGH; AV input only; query via FLES????"
- id: three_d_nr_set
  label: 3D-NR
  kind: action
  command: "TDNR{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: LOW, 2: HIGH; query via TDNR????"
- id: mpeg_nr_set
  label: MPEG-NR
  kind: action
  command: "MPNR{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via MPNR????"
- id: three_d_yc_set
  label: 3D-Y/C
  kind: action
  command: "YCSP{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; AV VIDEO input only; query via YCSP????"
- id: cms_hue_r_set
  label: C.M.S.-Hue R
  kind: action
  command: "CMHR{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10 (negative as 3 digits, e.g. CMHR-009); query via CMHR????"
- id: cms_hue_y_set
  label: C.M.S.-Hue Y
  kind: action
  command: "CMHY{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHY????"
- id: cms_hue_g_set
  label: C.M.S.-Hue G
  kind: action
  command: "CMHG{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHG????"
- id: cms_hue_c_set
  label: C.M.S.-Hue C
  kind: action
  command: "CMHC{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHC????"
- id: cms_hue_b_set
  label: C.M.S.-Hue B
  kind: action
  command: "CMHB{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHB????"
- id: cms_hue_m_set
  label: C.M.S.-Hue M
  kind: action
  command: "CMHM{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHM????"
- id: cms_saturation_r_set
  label: C.M.S.-Saturation R
  kind: action
  command: "CMSR{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSR????"
- id: cms_saturation_y_set
  label: C.M.S.-Saturation Y
  kind: action
  command: "CMSY{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSY????"
- id: cms_saturation_g_set
  label: C.M.S.-Saturation G
  kind: action
  command: "CMSG{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSG????"
- id: cms_saturation_c_set
  label: C.M.S.-Saturation C
  kind: action
  command: "CMSC{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSC????"
- id: cms_saturation_b_set
  label: C.M.S.-Saturation B
  kind: action
  command: "CMSB{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSB????"
- id: cms_saturation_m_set
  label: C.M.S.-Saturation M
  kind: action
  command: "CMSM{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSM????"
- id: cms_value_r_set
  label: C.M.S.-Value R
  kind: action
  command: "CMVR{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVR????"
- id: cms_value_y_set
  label: C.M.S.-Value Y
  kind: action
  command: "CMVY{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVY????"
- id: cms_value_g_set
  label: C.M.S.-Value G
  kind: action
  command: "CMVG{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVG????"
- id: cms_value_c_set
  label: C.M.S.-Value C
  kind: action
  command: "CMVC{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVC????"
- id: cms_value_b_set
  label: C.M.S.-Value B
  kind: action
  command: "CMVB{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVB????"
- id: cms_value_m_set
  label: C.M.S.-Value M
  kind: action
  command: "CMVM{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVM????"
- id: cms_reset
  label: C.M.S. Reset
  kind: action
  command: "CRST{value}"
  params:
    - name: value
      type: integer
      description: "1 = reset hue, 2 = reset saturation, 3 = reset brightness"
- id: color_mode_set
  label: Color Mode
  kind: action
  command: "BMOD{value}"
  params:
    - name: value
      type: integer
      description: "0: STD, 2: VIVID, 3: sRGB (PC input only); query via BMOD????"
- id: color_temp_set
  label: White Balance / Color Temperature
  kind: action
  command: "CTMP{value}"
  params:
    - name: value
      type: integer
      description: "0: THRU (PC DVI-D/PC HDMI), 1-17: preset approx 3000K (1) to 10000K (15) in 500K steps, 16: approx 5600K, 17: approx 9300K, 99: USER; query via CTMP????"
- id: r_contrast_set
  label: R-Contrast
  kind: action
  command: "CRTR{value}"
  params:
    - name: value
      type: integer
      description: "0-256; ERR when CTMP is not 99; query via CRTR????"
- id: g_contrast_set
  label: G-Contrast
  kind: action
  command: "CRTG{value}"
  params:
    - name: value
      type: integer
      description: "0-256; ERR when CTMP is not 99; query via CRTG????"
- id: b_contrast_set
  label: B-Contrast
  kind: action
  command: "CRTB{value}"
  params:
    - name: value
      type: integer
      description: "0-256; ERR when CTMP is not 99; query via CRTB????"
- id: copy_to_user
  label: Copy White Balance Preset to User
  kind: action
  command: "CPTU0000"
  params: []
- id: gamma_set
  label: Gamma
  kind: action
  command: "GAMM{value}"
  params:
    - name: value
      type: integer
      description: "0: 1.8, 1: 2.2, 2: 2.4, 4: USER, 5: 2.0; query via GAMM????"
- id: treble_set
  label: Treble
  kind: action
  command: "AUTR{value}"
  params:
    - name: value
      type: integer
      description: "-5 to 5 (negative as 3 digits, e.g. AUTR-009); query via AUTR????"
- id: bass_set
  label: Bass
  kind: action
  command: "AUBS{value}"
  params:
    - name: value
      type: integer
      description: "-5 to 5; query via AUBS????"
- id: balance_set
  label: Balance
  kind: action
  command: "AUBL{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via AUBL????"
- id: osd_h_position_set
  label: OSD H-Position
  kind: action
  command: "OSDH{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via OSDH????"
- id: osd_v_position_set
  label: OSD V-Position
  kind: action
  command: "OSDV{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via OSDV????"
- id: monitor_orientation_set
  label: Monitor Orientation
  kind: action
  command: "STDR{value}"
  params:
    - name: value
      type: integer
      description: "0: LANDSCAPE, 1: PORTRAIT; PN-E421 only; query via STDR????"
- id: monaural_audio_set
  label: Monaural Audio
  kind: action
  command: "MONO{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via MONO????"
- id: language_set
  label: Language
  kind: action
  command: "LANG{value}"
  params:
    - name: value
      type: integer
      description: "Language code; source table lists ENGLISH (first row), 1: DEUTSCH, 2: FRANÇAIS, 3: ITALIANO, 4: ESPAÑOL, 5: РУССКИЙ; full 0-14 mapping partially illegible in source; query via LANG????"
- id: power_on_delay_set
  label: Power On Delay
  kind: action
  command: "PWOD{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1-60: ON (delay in minutes); query via PWOD????"
- id: standby_mode_set
  label: Standby Mode
  kind: action
  command: "STBM{value}"
  params:
    - name: value
      type: integer
      description: "0: STANDARD, 1: LOW POWER (ERR when SCHEDULE is effective or OFF selected for LED); query via STBM????"
- id: hdmi_auto_view_set
  label: HDMI Auto View
  kind: action
  command: "HDAW{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via HDAW????"
- id: hdmi_rgb_range_set
  label: HDMI RGB Input Range
  kind: action
  command: "HDRA{value}"
  params:
    - name: value
      type: integer
      description: "0: AUTO, 1: FULL, 2: LIMITED; query via HDRA????"
- id: hot_plug_dvi_set
  label: Hot Plug Control (DVI)
  kind: action
  command: "HPCT{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via HPCT????"
- id: hot_plug_hdmi_set
  label: Hot Plug Control (HDMI)
  kind: action
  command: "HPCH{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via HPCH????"
- id: rs232c_lan_select_set
  label: RS-232C/LAN Select
  kind: action
  command: "CTLS{value}"
  params:
    - name: value
      type: integer
      description: "0: RS-232C, 1: LAN; query via CTLS????"
- id: id_number_set
  label: ID Number Set
  kind: action
  command: "IDST{value}"
  params:
    - name: value
      type: integer
      description: "W: 0-255, 0 = no ID number; R (IDST????) returns current ID number 0-255"
- id: id_select_once
  label: ID Number Set (Once)
  kind: action
  command: "IDSL{value}"
  params:
    - name: value
      type: integer
      description: "1-255 = target monitor ID for the immediately following command only; 0 = clear ID designation. Returns WAIT while searching"
- id: id_lock
  label: ID Number Set (Subsequent)
  kind: action
  command: "IDLK{value}"
  params:
    - name: value
      type: integer
      description: "1-255 = target monitor ID for all subsequent commands until canceled or power off; 0 = cancel ID lock. Returns WAIT while searching"
- id: id_check
  label: ID Check
  kind: action
  command: "IDCK0000"
  params: []
  # Displays monitor's own ID and current IDLK ID on screen; reply "ID : xxx  IDLK : yyy"
- id: baud_rate_set
  label: Baud Rate Select
  kind: action
  command: "BAUD{value}"
  params:
    - name: value
      type: integer
      description: "0: 9600bps, 1: 19200bps, 2: 38400bps; query via BAUD????"
- id: speaker_select_set
  label: Speaker Select
  kind: action
  command: "SPSL{value}"
  params:
    - name: value
      type: integer
      description: "0: internal speaker, 1: external speaker; query via SPSL????"
- id: dc_out_set
  label: Option DC Out Setting
  kind: action
  command: "DCOT{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: MODE1, 2: MODE2; requires PN-ZB01; query via DCOT????"
- id: date_time_set
  label: Date/Time Setting
  kind: action
  command: "DATE{AABBCCDDEE}"
  params:
    - name: AABBCCDDEE
      type: string
      description: "AA: year, BB: month, CC: day, DD: hour, EE: minute; no spaces; query via DATE????"
- id: schedule_set
  label: Schedule Setting
  kind: action
  command: "SC{nn}{ABCDEFFGGH}"
  params:
    - name: nn
      type: integer
      description: "Schedule number 01-08 (commands SC01 through SC08 listed as one table row)"
    - name: ABCDEFFGGH
      type: string
      description: "A: 0=not effective, 1=effective; B: power 0=OFF, 1=ON; C: 0=only once, 1=every week, 2=every day; D/E: day of week 0=Sunday, 1-6=Monday-Saturday, 9=not exist; F: hour 00-23; G: minute 00-59; H: input 0=not specified, 1=PC/AV DVI-D, 2=PC D-SUB, 3=PC RGB/AV COMPONENT, 4=AV VIDEO, 5=AV S-VIDEO, 6=PC/AV HDMI. ERR when LOW POWER selected for STANDBY MODE. No spaces"
- id: dvi_input_select_set
  label: Input Select DVI
  kind: action
  command: "DVSL{value}"
  params:
    - name: value
      type: integer
      description: "0: PC DVI-D, 1: AV DVI-D; query via DVSL????"
- id: bnc_input_select_set
  label: Input Select BNC
  kind: action
  command: "BNSL{value}"
  params:
    - name: value
      type: integer
      description: "0: PC RGB, 1: AV COMPONENT; query via BNSL????"
- id: hdmi_input_select_set
  label: Input Select HDMI
  kind: action
  command: "HDSL{value}"
  params:
    - name: value
      type: integer
      description: "0: PC HDMI, 1: AV HDMI; query via HDSL????"
- id: audio_select_pc_dvi_set
  label: Audio Select PC DVI-D
  kind: action
  command: "ASDP{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASDP????"
- id: audio_select_pc_dsub_set
  label: Audio Select PC D-SUB
  kind: action
  command: "ASAP{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASAP????"
- id: audio_select_pc_hdmi_set
  label: Audio Select PC HDMI
  kind: action
  command: "ASHP{value}"
  params:
    - name: value
      type: integer
      description: "0: HDMI, 1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASHP????"
- id: audio_select_pc_rgb_set
  label: Audio Select PC RGB
  kind: action
  command: "ASCP{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASCP????"
- id: audio_select_av_dvi_set
  label: Audio Select AV DVI-D
  kind: action
  command: "ASDA{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASDA????"
- id: audio_select_av_hdmi_set
  label: Audio Select AV HDMI
  kind: action
  command: "ASHA{value}"
  params:
    - name: value
      type: integer
      description: "0: HDMI, 1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASHA????"
- id: audio_select_av_component_set
  label: Audio Select AV COMPONENT
  kind: action
  command: "ASCA{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASCA????"
- id: audio_select_av_svideo_set
  label: Audio Select AV S-VIDEO
  kind: action
  command: "ASSA{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASSA????"
- id: audio_select_av_video_set
  label: Audio Select AV VIDEO
  kind: action
  command: "ASVA{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASVA????"
- id: pc_resolution_check
  label: PC Resolution Check
  kind: query
  command: "PXCK????"
  params: []
  # Returns current resolution as hhh, vvv
- id: pixel_setting_set
  label: Pixel Setting (PC D-SUB, PC RGB)
  kind: action
  command: "PXSL{value}"
  params:
    - name: value
      type: integer
      description: "1: 1360x768, 2: 1280x768, 3: 1024x768, 5: 848x480, 6: 640x480, 7: 1680x1050, 8: 1400x1050, 9: 768 AUTO, 10: 480 AUTO; query via PXSL????; returns WAIT"
- id: av_resolution_check
  label: AV Resolution Check
  kind: query
  command: "RESO????"
  params: []
  # Returns 480i, 480p, 1080i, 720p, 1080p, VGA, etc.
- id: zoom2_special_set
  label: Zoom2 Special Setting (PC D-SUB, PC RGB)
  kind: action
  command: "Z2SP{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via Z2SP????"
- id: scan_mode_set
  label: Scan Mode
  kind: action
  command: "SCAN{value}"
  params:
    - name: value
      type: integer
      description: "0: MODE1, 1: MODE2, 2: MODE3; AV input only; query via SCAN????"
- id: power_management_pc_set
  label: Power Management (PC)
  kind: action
  command: "PMNG{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via PMNG????"
- id: power_management_av_set
  label: Power Management (AV)
  kind: action
  command: "PMAV{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via PMAV????"
- id: color_system_set
  label: Color System
  kind: action
  command: "CSYS{value}"
  params:
    - name: value
      type: integer
      description: "0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43; query via CSYS????"
- id: audio_output_set
  label: Audio Output
  kind: action
  command: "AOUT{value}"
  params:
    - name: value
      type: integer
      description: "0: VARIABLE, 1: FIXED; query via AOUT????"
- id: audio_input_level_set
  label: Audio Input Level
  kind: action
  command: "AIVP{value}"
  params:
    - name: value
      type: integer
      description: "0: 1.0Vrms, 1: 0.5Vrms; query via AIVP????"
- id: self_adjust_set
  label: Self Adjust
  kind: action
  command: "AADJ{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via AADJ????"
- id: auto_input_change_set
  label: Auto Input Change
  kind: action
  command: "AINC{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via AINC????"
- id: enlarge_mode_set
  label: Enlarge Mode
  kind: action
  command: "EMAG{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: 2x2, 2: 3x3, 3: 4x4, 4: 5x5; PC input only; query via EMAG????; returns WAIT"
- id: enlarge_mode_mxn_set
  label: Enlarge Mode MxN
  kind: action
  command: "EMHV{mn}"
  params:
    - name: mn
      type: integer
      description: "11-55; m x n expressed as mn (m = longest direction, n = shortest direction monitors); requires PN-ZB01; returns WAIT"
- id: bezel_width_h_set
  label: Bezel Width (Shorter Side)
  kind: action
  command: "BEZH{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via BEZH????"
- id: bezel_width_v_set
  label: Bezel Width (Longer Side)
  kind: action
  command: "BEZV{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via BEZV????"
- id: image_position_mxn_set
  label: Image Position MxN
  kind: action
  command: "EPHV{mn}"
  params:
    - name: mn
      type: integer
      description: "11-55; ENLARGE POSITION in longest/shortest direction; requires PN-ZB01; returns WAIT"
- id: image_position_set
  label: Image Position
  kind: action
  command: "EPOS{value}"
  params:
    - name: value
      type: integer
      description: "0-3 for 2x2, 0-8 for 3x3, 0-15 for 4x4, 0-24 for 5x5 (position grid, see source); returns WAIT"
- id: enlarge_screen_h_position_set
  label: Enlarged Screen Positioning (Longest Direction)
  kind: action
  command: "EPSH{value}"
  params:
    - name: value
      type: integer
      description: "-999 to 999 (negative as 3 digits); range depends on ENLARGE MODE and IMAGE POSITION; query via EPSH????"
- id: enlarge_screen_v_position_set
  label: Enlarged Screen Positioning (Shortest Direction)
  kind: action
  command: "EPSV{value}"
  params:
    - name: value
      type: integer
      description: "-999 to 999 (negative as 3 digits); query via EPSV????"
- id: enlarge_image_position_setting
  label: Enlarge/Image Position Setting
  kind: action
  command: "ESTG{XXYY}"
  params:
    - name: XXYY
      type: string
      description: "XX: ENLARGE MODE (same values as EMAG), YY: IMAGE POSITION (same values as EPOS)"
- id: enlarge_image_position_setting_mxn
  label: Enlarge/Image Position Setting MxN
  kind: action
  command: "ESHV{XXYY}"
  params:
    - name: XXYY
      type: string
      description: "XX: ENLARGE MODE (same values as EMHV), YY: IMAGE POSITION (same values as EPHV); returns WAIT"
- id: pip_mode_set
  label: PIP Modes
  kind: action
  command: "MWIN{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: PIP, 2: PbyP, 3: PbyP2; query via MWIN????; returns WAIT"
- id: pip_size_set
  label: PIP Size
  kind: action
  command: "MPSZ{value}"
  params:
    - name: value
      type: integer
      description: "1-12; query via MPSZ????"
- id: pip_pos_h_set
  label: PIP Pos (Longest Direction)
  kind: action
  command: "MHPS{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via MHPS????"
- id: pip_pos_v_set
  label: PIP Pos (Shortest Direction)
  kind: action
  command: "MVPS{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via MVPS????"
- id: pip_pos_batch_set
  label: PIP Pos LD+SD Batch
  kind: action
  command: "MPOS{xxx}{yyy}"
  params:
    - name: xxx
      type: integer
      description: "Longer side position 0-100, 3 digits, no spaces (e.g. MPOS010097)"
    - name: yyy
      type: integer
      description: "Shorter side position 0-100, 3 digits"
- id: pip_blend_set
  label: PIP Blend
  kind: action
  command: "MWBL{value}"
  params:
    - name: value
      type: integer
      description: "0-15; query via MWBL????"
- id: pip_source_set
  label: PIP Source
  kind: action
  command: "MWIP{value}"
  params:
    - name: value
      type: integer
      description: "1: PC DVI-D, 2: PC D-SUB, 3: AV COMPONENT, 4: AV VIDEO, 6: PC RGB, 7: AV DVI-D, 8: AV S-VIDEO, 9: AV HDMI, 10: PC HDMI; query via MWIP????; returns WAIT"
- id: sound_change
  label: Sound Change
  kind: action
  command: "MWAD{value}"
  params:
    - name: value
      type: integer
      description: "1: MAIN, 2: SUB; query via MWAD????"
- id: main_pos_set
  label: Main Pos
  kind: action
  command: "MWPP{value}"
  params:
    - name: value
      type: integer
      description: "0: POS1, 1: POS2; query via MWPP????"
- id: pbyp2_pos_set
  label: PbyP2 Pos
  kind: action
  command: "MW2P{value}"
  params:
    - name: value
      type: integer
      description: "0: POS1, 1: POS2, 2: POS3; query via MW2P????"
- id: pip_auto_off_set
  label: PIP Auto Off
  kind: action
  command: "MOFF{value}"
  params:
    - name: value
      type: integer
      description: "0: MANUAL, 1: AUTO; query via MOFF????"
- id: all_reset
  label: All Reset
  kind: action
  command: "RSET{value}"
  params:
    - name: value
      type: integer
      description: "0: ALL RESET (without PN-ZB01); 0: ALL RESET 1, 1: ALL RESET 2 (with PN-ZB01). Set timeout 30s or longer. ALL RESET 1 also initializes personal info (e-mail addresses); ALL RESET 2 does not"
- id: adjustment_lock_set
  label: Adjustment Lock
  kind: action
  command: "ALCK{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF (operation enabled), 1: disables all operations other than power on/off and FUNCTION, 2: only FUNCTION operation enabled; query via ALCK????"
- id: osd_display_set
  label: OSD Display
  kind: action
  command: "LOSD{value}"
  params:
    - name: value
      type: integer
      description: "0: ON, 1: OFF; query via LOSD????"
- id: led_set
  label: LED
  kind: action
  command: "OFLD{value}"
  params:
    - name: value
      type: integer
      description: "0: ON, 1: OFF; ERR when LOW POWER selected for STANDBY MODE; query via OFLD????"
- id: temperature_alert_set
  label: Temperature Alert
  kind: action
  command: "TALT{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: OSD & LED, 2: LED; query via TALT????"
- id: status_alert_set
  label: Status Alert
  kind: action
  command: "SALT{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: OSD & LED, 2: LED; query via SALT????"
- id: power_button_set
  label: Power Button
  kind: action
  command: "PBTN{value}"
  params:
    - name: value
      type: integer
      description: "0: MONITOR, 1: CONTROLLER; query via PBTN????"
- id: controller_input_set
  label: Controller Input
  kind: action
  command: "PCIP{value}"
  params:
    - name: value
      type: integer
      description: "0: D-SUB, 1: HDMI, 2: DVI-D; ERR when MONITOR selected for POWER BUTTON; query via PCIP????"
- id: screen_size_pc_set
  label: Screen Size (PC)
  kind: action
  command: "WIDE{value}"
  params:
    - name: value
      type: integer
      description: "PC: 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2; AV: 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot (same opcode WIDE for both); query via WIDE????; returns WAIT"
- id: volume_set
  label: Volume
  kind: action
  command: "VOLM{value}"
  params:
    - name: value
      type: integer
      description: "0-31, zero-padded 4 digits (e.g. VOLM0030); query VOLM???? returns current volume (e.g. 30)"
- id: mute_set
  label: Mute
  kind: action
  command: "MUTE{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via MUTE????"
- id: model_name_query
  label: Model Name Information
  kind: query
  command: "INF1????"
  params: []
  # Returns model name value
- id: serial_number_query
  label: Serial Number Information
  kind: query
  command: "SRNO????"
  params: []
  # Returns serial number value
- id: backlight_brightness_set
  label: Backlight Brightness
  kind: action
  command: "VLMP{value}"
  params:
    - name: value
      type: integer
      description: "0-31; query via VLMP????"
- id: temperature_sensor_status_query
  label: Temperature Sensor Status
  kind: query
  command: "DSTA????"
  params: []
  # Returns 0-4, see temperature_sensor_status feedback
- id: temperature_acquisition_query
  label: Temperature Acquisition
  kind: query
  command: "ERRT????"
  params: []
  # Returns [Sensor1],[Sensor2],[Sensor3]; 126 indicates sensor abnormality
- id: standby_cause_init
  label: Cause of Last Standby Initialization
  kind: action
  command: "STCA0000"
  params: []
- id: standby_cause_query
  label: Cause of Last Standby Mode
  kind: query
  command: "STCA????"
  params: []
  # Returns 0/1/2/3/4/6/8, see standby_cause feedback
- id: gamma_red_transfer
  label: Red Gamma Data Transfer
  kind: action
  command: "UGRW{aa}{xxxx...xxxx}{cc}"
  params:
    - name: aa
      type: integer
      description: "Block number 01-16 (512 data pieces split into 16 blocks of 32)"
    - name: xxxx
      type: string
      description: "32 pieces of 4-digit user data (0000-1023), zero-padded to 4 digits"
    - name: cc
      type: string
      description: "Checksum: lower-order 1 byte (hex 0-F) ASCII of sum of block number + 32 data pieces"
- id: gamma_green_transfer
  label: Green Gamma Data Transfer
  kind: action
  command: "UGGW{aa}{xxxx...xxxx}{cc}"
  params:
    - name: aa
      type: integer
      description: "Block number 01-16"
    - name: xxxx
      type: string
      description: "32 pieces of 4-digit user data (0000-1023)"
    - name: cc
      type: string
      description: "Checksum (same as UGRW)"
- id: gamma_blue_transfer
  label: Blue Gamma Data Transfer
  kind: action
  command: "UGBW{aa}{xxxx...xxxx}{cc}"
  params:
    - name: aa
      type: integer
      description: "Block number 01-16"
    - name: xxxx
      type: string
      description: "32 pieces of 4-digit user data (0000-1023)"
    - name: cc
      type: string
      description: "Checksum (same as UGRW)"
- id: gamma_red_read
  label: Red Gamma Data Read
  kind: query
  command: "UGRR{aa}"
  params:
    - name: aa
      type: integer
      description: "Block number 1-16; returns 32 pieces of user data (value from temporary display memory, not stored value)"
- id: gamma_green_read
  label: Green Gamma Data Read
  kind: query
  command: "UGGR{aa}"
  params:
    - name: aa
      type: integer
      description: "Block number 1-16"
- id: gamma_blue_read
  label: Blue Gamma Data Read
  kind: query
  command: "UGBR{aa}"
  params:
    - name: aa
      type: integer
      description: "Block number 1-16"
- id: gamma_user_data_initialize
  label: Gamma User Data Initialize
  kind: action
  command: "UGRS0000"
  params: []
- id: gamma_user_data_save
  label: Gamma User Data Save
  kind: action
  command: "UGSV0000"
  params: []
  # Saves transferred user data; otherwise cleared at main power off or LOW POWER standby

Feedbacks

- id: ok_response
  type: string
  values: ["OK"]
  # Returned after command executed correctly; with ID assigned: "OK 001" (space + ID)
- id: err_response
  type: string
  values: ["ERR"]
  # No relevant command or command unusable in current state
- id: wait_response
  type: string
  values: ["WAIT"]
  # Repeater control, IDSL/IDLK, or RSET/INPS/ASNC/WIDE/EMAG/EPOS/PXSL/POWR/AGIN/MWIN/MWIP/MWPP/ESTG/EMHV/EPHV/ESHV in progress; do not send commands; no ID attached
- id: locked_response
  type: string
  values: ["LOCKED"]
  # RS-232C control locked by operation lock (ALCK)
- id: unselected_response
  type: string
  values: ["UNSELECTED"]
  # Returned when RS-232C/LAN SELECT is set to LAN
- id: power_state
  type: enum
  values: [standby, normal, input_signal_waiting]
  # POWR???? reply: 0/1/2
- id: input_mode
  type: enum
  values: [pc_dvi_d, pc_d_sub, av_component, av_video, pc_rgb, av_dvi_d, av_s_video, av_hdmi, pc_hdmi]
  # INPS???? reply: 1/2/3/4/6/7/8/9/10
- id: volume_level
  type: integer
  values: "0-31"
  # VOLM???? reply
- id: id_number
  type: integer
  values: "0-255"
  # IDST???? reply; 0 = no ID assigned; responses append " nnn" (space + 3-digit ID) when ID assigned
- id: model_name
  type: string
  # INF1???? reply
- id: serial_number
  type: string
  # SRNO???? reply
- id: temperature_sensor_status
  type: enum
  values: [normal, abnormal_standby, abnormal_recovered, abnormal_backlight_dimmed, sensor_abnormal]
  # DSTA???? reply: 0/1/2/3/4
- id: sensor_temperatures
  type: string
  # ERRT???? reply "[Sensor1],[Sensor2],[Sensor3]"; 126 = sensor abnormality
- id: standby_cause
  type: enum
  values: [no_error, power_button, main_power_switch, rs232c_or_lan, no_signal, abnormal_temperature, schedule]
  # STCA???? reply: 0/1/2/3/4/6/8
- id: pc_resolution
  type: string
  # PXCK???? reply "hhh, vvv"
- id: av_resolution
  type: string
  # RESO???? reply: 480i, 480p, 1080i, 720p, 1080p, VGA, etc.

Variables

# All settable parameters in this source are exposed as discrete RS-232C commands
# and are represented as Actions above (VOLM, VLMP, CONT, etc.).
# UNRESOLVED: no additional settable parameters outside the command table found in source.

Events

# No unsolicited protocol-level notifications documented in source.
# Temperature Alert (TALT) and Status Alert (SALT) notify via OSD/LED only, not via RS-232C messages.
# UNRESOLVED: LAN/e-mail notification content (PN-ZB01) not detailed in source.

Macros

- id: auto_assign_ids_repeater
  label: Auto-assign ID numbers to daisy chain
  steps:
    - "IDST001+"  # repeater control (4th param char "+") assigns sequential IDs to all monitors
  notes: "Responses returned by all connected monitors; send next command only after last monitor replies"
- id: gamma_user_data_upload
  label: Upload and activate GAMMA user data
  steps:
    - "UGRW{block}{data}{checksum} x16 blocks (red)"
    - "UGGW{block}{data}{checksum} x16 blocks (green)"
    - "UGBW{block}{data}{checksum} x16 blocks (blue)"
    - "UGSV0000"  # save to monitor, otherwise cleared at main power off or LOW POWER standby
    - "GAMM0004"  # activate by selecting USER gamma
  notes: "512 data pieces per color, 32 per block; checksum = lower-order 1 byte ASCII hex of block number + data sum"

Safety

confirmation_required_for: []
interlocks: []
# UNRESOLVED: source contains no explicit safety warnings, interlock procedures, or
# power-on sequencing requirements for control. Temperature abnormality handling
# (standby, backlight dimming) is automatic device behavior, not a control-side interlock.

Notes

Command format: 4-character command field + 4-character parameter field (exactly 4 chars, pad with spaces, e.g. "VOLM 30" written as VOLM0030; wrong: VOLM30). Return code 0DH or 0AH (or both) terminates commands/responses.
Negative parameters: 3-digit numeric with minus (e.g. AUTR-009). No spaces allowed for MPOS, DATE, SC01-SC08.
Daisy chain: up to 25 monitors via RS-232C in/out terminals; all monitors must use same baud rate; assign unique IDs (0-255, 0 = no ID). IDSL targets next command only; IDLK persists until canceled (IDLK0000) or power off; repeater control cancels ID designation.
Repeater control: set 4th parameter character to "+" (e.g. VOLM030+) to command all monitors; all monitors respond. Cannot be used in LOW POWER standby.
Timing: wait for OK/ERR before next command; response timeout 10s or longer (daisy chain: monitor position x 10s, e.g. 3rd monitor = 30s); ALL RESET needs 30s+; POWER ON DELAY active: timeout = delay + 10s; minimum 100 ms between response and next command.
WAIT returned for: repeater control, IDSL/IDLK, and commands RSET, INPS, ASNC, WIDE, EMAG, EPOS, PXSL, POWR, AGIN, MWIN, MWIP, MWPP, ESTG, EMHV, EPHV, ESHV. No ID attached to WAIT. Do not send commands during WAIT.
If no monitor matches designated ID (e.g. IDSL0002 with no ID 2 present), no response returned. Bad connection = no response at all (not even ERR).
PN-ZB01 (optional) required for LAN, EMHV/EPHV/ESHV and some commands marked in table with (A)/(B) columns; RS-232C and LAN control cannot be used simultaneously (CTLS selects). UNSELECTED returned over RS-232C when CTLS = LAN.
Factory LAN defaults (PN-ZB01): IP 192.168.150.2, subnet 255.255.255.0, gateway 0.0.0.0; configure PC as 192.168.150.3 to access via Internet Explorer.
STANDBY MODE LOW POWER restricts standby-mode commands (marked "-" in table) and repeater control in standby; OFF LED unavailable in LOW POWER.
ALL RESET 1 (with PN-ZB01) initializes personal information including registered e-mail addresses — relevant before transfer/disposal.
ARST opcode covers three resets (1=SCREEN, 2=PICTURE, 3=AUDIO); WIDE opcode covers both PC and AV screen-size mappings with different value meanings.

Provenance

source_domains:
  - business.sharpusa.com
source_urls:
  - https://business.sharpusa.com/portals/0/downloads/Manuals/mon_man_PNE421_471.pdf
  - https://business.sharpusa.com/portals/0/downloads/Manuals/mon_man_PNE521_601.pdf
  - https://business.sharpusa.com/portals/0/downloads/Manuals/mon_man_PNE521_601_install.pdf
  - https://business.sharpusa.com/Portals/0/downloads/Manuals/PN_E603_703_Operation_Manual.pdf
retrieved_at: 2026-05-01T02:57:30.386Z
last_checked_at: 2026-09-19T22:17:16.715Z

Verification Summary

verdict: verified
checked_at: 2026-09-19T22:17:16.715Z
matched_actions: 143
action_count: 143
confidence: medium
summary: "All 143 spec actions map to distinct 4-char opcodes in the RS-232C command table; transport values verified; source command catalogue fully represented. (10 unresolved item(s) noted in Known Gaps.)"

Known Gaps

- "LAN control method details (port, URL paths, API) not documented in source — only web-browser access mentioned."
- "exact model list covered by this manual — only PN-E421 explicitly named in source text."
- "firmware version compatibility not stated in source."
- "no URL/path pattern stated in source"
- "port number not stated in source"
- "no additional settable parameters outside the command table found in source."
- "LAN/e-mail notification content (PN-ZB01) not detailed in source."
- "source contains no explicit safety warnings, interlock procedures, or"
- "LAN control protocol details (port, HTTP API, e-mail notification format) not stated in source."
- "LANG full 0-14 code mapping partially illegible in source table."

From the AI4AV catalog (https://ai4av.net) · ODbL-1.0

Summary

Transport

protocols:
  - serial
  - http  # inferred: LAN control via web browser (Internet Explorer) mentioned in source; requires optional PN-ZB01
serial:
  baud_rate: 9600  # initial setting; settable to 9600/19200/38400 via BAUD command
  data_bits: 8
  parity: none
  stop_bits: 1
  flow_control: none
addressing:
  base_url: null  # UNRESOLVED: no URL/path pattern stated in source
  port: null  # UNRESOLVED: port number not stated in source
auth:
  type: none  # inferred: no auth procedure in source

Traits

# - powerable    (POWR standby/on command present)
# - queryable    (R-direction queries: POWR?, VOLM?, INF1, SRNO, DSTA, ERRT, STCA, PXCK, RESO, etc.)
# - routable     (INPS input mode selection commands present)
# - levelable    (VOLM, CONT, BLVL, VLMP, etc. level commands present)
- powerable
- queryable
- routable
- levelable

Actions

# Command format: 4-char command field + 4-char parameter field, terminated by return code (0DH or 0AH).
# Parameter MUST be exactly 4 characters, padded with spaces. Negative values as 3 digits (e.g. AUTR-009).
# Query (R-direction): send "????" as parameter (e.g. VOLM????). Repeater control: 4th parameter char "+".
# W = set, R = readable via ???? query, WR = both.
- id: power_set
  label: Power Control
  kind: action
  command: "POWR{state}"
  params:
    - name: state
      type: integer
      description: "W: 0 = switch to standby mode, 1 = return from standby. R (POWR????): 0 = standby mode, 1 = normal mode, 2 = input signal waiting mode"
- id: input_mode_select
  label: Input Mode Selection
  kind: action
  command: "INPS{input}"
  params:
    - name: input
      type: integer
      description: "W: 0 = toggle, 1 = PC DVI-D, 2 = PC D-SUB, 3 = AV COMPONENT, 4 = AV VIDEO, 6 = PC RGB, 7 = AV DVI-D, 8 = AV S-VIDEO, 9 = AV HDMI, 10 = PC HDMI. R returns same codes 1-10. Some selections return ERR depending on INPUT SELECT settings"
- id: screen_auto_adjust
  label: Screen Auto Adjust
  kind: action
  command: "ASNC0001"
  params: []
  # AUTO (SCREEN menu); when input mode is PC D-SUB or PC RGB; returns WAIT
- id: clock_set
  label: Clock
  kind: action
  command: "CLCK{value}"
  params:
    - name: value
      type: integer
      description: "0-1200; PC D-SUB/PC RGB only; varies depending on signal; query via CLCK????"
- id: phase_set
  label: Phase
  kind: action
  command: "PHSE{value}"
  params:
    - name: value
      type: integer
      description: "0-63; PC D-SUB/PC RGB only; query via PHSE????"
- id: h_position_set
  label: H-Position
  kind: action
  command: "HPOS{value}"
  params:
    - name: value
      type: integer
      description: "0-100 (0-800 on PC D-SUB/PC RGB); query via HPOS????"
- id: v_position_set
  label: V-Position
  kind: action
  command: "VPOS{value}"
  params:
    - name: value
      type: integer
      description: "0-100 (0-200 on PC D-SUB/PC RGB); query via VPOS????"
- id: h_size_set
  label: H-Size
  kind: action
  command: "HSIZ{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via HSIZ????"
- id: v_size_set
  label: V-Size
  kind: action
  command: "VSIZ{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via VSIZ????"
- id: h_resolution_set
  label: H-Resolution
  kind: action
  command: "HRES{value}"
  params:
    - name: value
      type: integer
      description: "300-1920, only even numbers valid; PC D-SUB/PC RGB only; query via HRES????"
- id: v_resolution_set
  label: V-Resolution
  kind: action
  command: "VRES{value}"
  params:
    - name: value
      type: integer
      description: "200-1200, only even numbers valid; query via VRES????"
- id: screen_reset
  label: Screen/Picture/Audio Reset
  kind: action
  command: "ARST{value}"
  params:
    - name: value
      type: integer
      description: "1 = SCREEN menu reset, 2 = PICTURE menu reset, 3 = AUDIO menu reset"
- id: picture_auto_adjust
  label: Picture Auto Adjust
  kind: action
  command: "AGIN0001"
  params: []
  # AUTO (PICTURE menu); PC D-SUB/PC RGB only; returns WAIT
- id: contrast_set
  label: Contrast
  kind: action
  command: "CONT{value}"
  params:
    - name: value
      type: integer
      description: "0-60 (0-127 on PC D-SUB/PC RGB); query via CONT????"
- id: black_level_set
  label: Black Level
  kind: action
  command: "BLVL{value}"
  params:
    - name: value
      type: integer
      description: "0-60 (0-127 on PC D-SUB/PC RGB); query via BLVL????"
- id: tint_set
  label: Tint
  kind: action
  command: "TINT{value}"
  params:
    - name: value
      type: integer
      description: "0-60; query via TINT????"
- id: color_set
  label: Colors
  kind: action
  command: "COLR{value}"
  params:
    - name: value
      type: integer
      description: "0-60; query via COLR????"
- id: sharpness_set
  label: Sharpness
  kind: action
  command: "SHRP{value}"
  params:
    - name: value
      type: integer
      description: "0-24; query via SHRP????"
- id: flesh_tone_set
  label: Flesh Tone
  kind: action
  command: "FLES{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: LOW, 2: HIGH; AV input only; query via FLES????"
- id: three_d_nr_set
  label: 3D-NR
  kind: action
  command: "TDNR{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: LOW, 2: HIGH; query via TDNR????"
- id: mpeg_nr_set
  label: MPEG-NR
  kind: action
  command: "MPNR{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via MPNR????"
- id: three_d_yc_set
  label: 3D-Y/C
  kind: action
  command: "YCSP{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; AV VIDEO input only; query via YCSP????"
- id: cms_hue_r_set
  label: C.M.S.-Hue R
  kind: action
  command: "CMHR{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10 (negative as 3 digits, e.g. CMHR-009); query via CMHR????"
- id: cms_hue_y_set
  label: C.M.S.-Hue Y
  kind: action
  command: "CMHY{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHY????"
- id: cms_hue_g_set
  label: C.M.S.-Hue G
  kind: action
  command: "CMHG{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHG????"
- id: cms_hue_c_set
  label: C.M.S.-Hue C
  kind: action
  command: "CMHC{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHC????"
- id: cms_hue_b_set
  label: C.M.S.-Hue B
  kind: action
  command: "CMHB{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHB????"
- id: cms_hue_m_set
  label: C.M.S.-Hue M
  kind: action
  command: "CMHM{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMHM????"
- id: cms_saturation_r_set
  label: C.M.S.-Saturation R
  kind: action
  command: "CMSR{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSR????"
- id: cms_saturation_y_set
  label: C.M.S.-Saturation Y
  kind: action
  command: "CMSY{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSY????"
- id: cms_saturation_g_set
  label: C.M.S.-Saturation G
  kind: action
  command: "CMSG{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSG????"
- id: cms_saturation_c_set
  label: C.M.S.-Saturation C
  kind: action
  command: "CMSC{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSC????"
- id: cms_saturation_b_set
  label: C.M.S.-Saturation B
  kind: action
  command: "CMSB{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSB????"
- id: cms_saturation_m_set
  label: C.M.S.-Saturation M
  kind: action
  command: "CMSM{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMSM????"
- id: cms_value_r_set
  label: C.M.S.-Value R
  kind: action
  command: "CMVR{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVR????"
- id: cms_value_y_set
  label: C.M.S.-Value Y
  kind: action
  command: "CMVY{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVY????"
- id: cms_value_g_set
  label: C.M.S.-Value G
  kind: action
  command: "CMVG{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVG????"
- id: cms_value_c_set
  label: C.M.S.-Value C
  kind: action
  command: "CMVC{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVC????"
- id: cms_value_b_set
  label: C.M.S.-Value B
  kind: action
  command: "CMVB{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVB????"
- id: cms_value_m_set
  label: C.M.S.-Value M
  kind: action
  command: "CMVM{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via CMVM????"
- id: cms_reset
  label: C.M.S. Reset
  kind: action
  command: "CRST{value}"
  params:
    - name: value
      type: integer
      description: "1 = reset hue, 2 = reset saturation, 3 = reset brightness"
- id: color_mode_set
  label: Color Mode
  kind: action
  command: "BMOD{value}"
  params:
    - name: value
      type: integer
      description: "0: STD, 2: VIVID, 3: sRGB (PC input only); query via BMOD????"
- id: color_temp_set
  label: White Balance / Color Temperature
  kind: action
  command: "CTMP{value}"
  params:
    - name: value
      type: integer
      description: "0: THRU (PC DVI-D/PC HDMI), 1-17: preset approx 3000K (1) to 10000K (15) in 500K steps, 16: approx 5600K, 17: approx 9300K, 99: USER; query via CTMP????"
- id: r_contrast_set
  label: R-Contrast
  kind: action
  command: "CRTR{value}"
  params:
    - name: value
      type: integer
      description: "0-256; ERR when CTMP is not 99; query via CRTR????"
- id: g_contrast_set
  label: G-Contrast
  kind: action
  command: "CRTG{value}"
  params:
    - name: value
      type: integer
      description: "0-256; ERR when CTMP is not 99; query via CRTG????"
- id: b_contrast_set
  label: B-Contrast
  kind: action
  command: "CRTB{value}"
  params:
    - name: value
      type: integer
      description: "0-256; ERR when CTMP is not 99; query via CRTB????"
- id: copy_to_user
  label: Copy White Balance Preset to User
  kind: action
  command: "CPTU0000"
  params: []
- id: gamma_set
  label: Gamma
  kind: action
  command: "GAMM{value}"
  params:
    - name: value
      type: integer
      description: "0: 1.8, 1: 2.2, 2: 2.4, 4: USER, 5: 2.0; query via GAMM????"
- id: treble_set
  label: Treble
  kind: action
  command: "AUTR{value}"
  params:
    - name: value
      type: integer
      description: "-5 to 5 (negative as 3 digits, e.g. AUTR-009); query via AUTR????"
- id: bass_set
  label: Bass
  kind: action
  command: "AUBS{value}"
  params:
    - name: value
      type: integer
      description: "-5 to 5; query via AUBS????"
- id: balance_set
  label: Balance
  kind: action
  command: "AUBL{value}"
  params:
    - name: value
      type: integer
      description: "-10 to 10; query via AUBL????"
- id: osd_h_position_set
  label: OSD H-Position
  kind: action
  command: "OSDH{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via OSDH????"
- id: osd_v_position_set
  label: OSD V-Position
  kind: action
  command: "OSDV{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via OSDV????"
- id: monitor_orientation_set
  label: Monitor Orientation
  kind: action
  command: "STDR{value}"
  params:
    - name: value
      type: integer
      description: "0: LANDSCAPE, 1: PORTRAIT; PN-E421 only; query via STDR????"
- id: monaural_audio_set
  label: Monaural Audio
  kind: action
  command: "MONO{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via MONO????"
- id: language_set
  label: Language
  kind: action
  command: "LANG{value}"
  params:
    - name: value
      type: integer
      description: "Language code; source table lists ENGLISH (first row), 1: DEUTSCH, 2: FRANÇAIS, 3: ITALIANO, 4: ESPAÑOL, 5: РУССКИЙ; full 0-14 mapping partially illegible in source; query via LANG????"
- id: power_on_delay_set
  label: Power On Delay
  kind: action
  command: "PWOD{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1-60: ON (delay in minutes); query via PWOD????"
- id: standby_mode_set
  label: Standby Mode
  kind: action
  command: "STBM{value}"
  params:
    - name: value
      type: integer
      description: "0: STANDARD, 1: LOW POWER (ERR when SCHEDULE is effective or OFF selected for LED); query via STBM????"
- id: hdmi_auto_view_set
  label: HDMI Auto View
  kind: action
  command: "HDAW{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via HDAW????"
- id: hdmi_rgb_range_set
  label: HDMI RGB Input Range
  kind: action
  command: "HDRA{value}"
  params:
    - name: value
      type: integer
      description: "0: AUTO, 1: FULL, 2: LIMITED; query via HDRA????"
- id: hot_plug_dvi_set
  label: Hot Plug Control (DVI)
  kind: action
  command: "HPCT{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via HPCT????"
- id: hot_plug_hdmi_set
  label: Hot Plug Control (HDMI)
  kind: action
  command: "HPCH{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via HPCH????"
- id: rs232c_lan_select_set
  label: RS-232C/LAN Select
  kind: action
  command: "CTLS{value}"
  params:
    - name: value
      type: integer
      description: "0: RS-232C, 1: LAN; query via CTLS????"
- id: id_number_set
  label: ID Number Set
  kind: action
  command: "IDST{value}"
  params:
    - name: value
      type: integer
      description: "W: 0-255, 0 = no ID number; R (IDST????) returns current ID number 0-255"
- id: id_select_once
  label: ID Number Set (Once)
  kind: action
  command: "IDSL{value}"
  params:
    - name: value
      type: integer
      description: "1-255 = target monitor ID for the immediately following command only; 0 = clear ID designation. Returns WAIT while searching"
- id: id_lock
  label: ID Number Set (Subsequent)
  kind: action
  command: "IDLK{value}"
  params:
    - name: value
      type: integer
      description: "1-255 = target monitor ID for all subsequent commands until canceled or power off; 0 = cancel ID lock. Returns WAIT while searching"
- id: id_check
  label: ID Check
  kind: action
  command: "IDCK0000"
  params: []
  # Displays monitor's own ID and current IDLK ID on screen; reply "ID : xxx  IDLK : yyy"
- id: baud_rate_set
  label: Baud Rate Select
  kind: action
  command: "BAUD{value}"
  params:
    - name: value
      type: integer
      description: "0: 9600bps, 1: 19200bps, 2: 38400bps; query via BAUD????"
- id: speaker_select_set
  label: Speaker Select
  kind: action
  command: "SPSL{value}"
  params:
    - name: value
      type: integer
      description: "0: internal speaker, 1: external speaker; query via SPSL????"
- id: dc_out_set
  label: Option DC Out Setting
  kind: action
  command: "DCOT{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: MODE1, 2: MODE2; requires PN-ZB01; query via DCOT????"
- id: date_time_set
  label: Date/Time Setting
  kind: action
  command: "DATE{AABBCCDDEE}"
  params:
    - name: AABBCCDDEE
      type: string
      description: "AA: year, BB: month, CC: day, DD: hour, EE: minute; no spaces; query via DATE????"
- id: schedule_set
  label: Schedule Setting
  kind: action
  command: "SC{nn}{ABCDEFFGGH}"
  params:
    - name: nn
      type: integer
      description: "Schedule number 01-08 (commands SC01 through SC08 listed as one table row)"
    - name: ABCDEFFGGH
      type: string
      description: "A: 0=not effective, 1=effective; B: power 0=OFF, 1=ON; C: 0=only once, 1=every week, 2=every day; D/E: day of week 0=Sunday, 1-6=Monday-Saturday, 9=not exist; F: hour 00-23; G: minute 00-59; H: input 0=not specified, 1=PC/AV DVI-D, 2=PC D-SUB, 3=PC RGB/AV COMPONENT, 4=AV VIDEO, 5=AV S-VIDEO, 6=PC/AV HDMI. ERR when LOW POWER selected for STANDBY MODE. No spaces"
- id: dvi_input_select_set
  label: Input Select DVI
  kind: action
  command: "DVSL{value}"
  params:
    - name: value
      type: integer
      description: "0: PC DVI-D, 1: AV DVI-D; query via DVSL????"
- id: bnc_input_select_set
  label: Input Select BNC
  kind: action
  command: "BNSL{value}"
  params:
    - name: value
      type: integer
      description: "0: PC RGB, 1: AV COMPONENT; query via BNSL????"
- id: hdmi_input_select_set
  label: Input Select HDMI
  kind: action
  command: "HDSL{value}"
  params:
    - name: value
      type: integer
      description: "0: PC HDMI, 1: AV HDMI; query via HDSL????"
- id: audio_select_pc_dvi_set
  label: Audio Select PC DVI-D
  kind: action
  command: "ASDP{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASDP????"
- id: audio_select_pc_dsub_set
  label: Audio Select PC D-SUB
  kind: action
  command: "ASAP{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASAP????"
- id: audio_select_pc_hdmi_set
  label: Audio Select PC HDMI
  kind: action
  command: "ASHP{value}"
  params:
    - name: value
      type: integer
      description: "0: HDMI, 1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASHP????"
- id: audio_select_pc_rgb_set
  label: Audio Select PC RGB
  kind: action
  command: "ASCP{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASCP????"
- id: audio_select_av_dvi_set
  label: Audio Select AV DVI-D
  kind: action
  command: "ASDA{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASDA????"
- id: audio_select_av_hdmi_set
  label: Audio Select AV HDMI
  kind: action
  command: "ASHA{value}"
  params:
    - name: value
      type: integer
      description: "0: HDMI, 1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASHA????"
- id: audio_select_av_component_set
  label: Audio Select AV COMPONENT
  kind: action
  command: "ASCA{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASCA????"
- id: audio_select_av_svideo_set
  label: Audio Select AV S-VIDEO
  kind: action
  command: "ASSA{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASSA????"
- id: audio_select_av_video_set
  label: Audio Select AV VIDEO
  kind: action
  command: "ASVA{value}"
  params:
    - name: value
      type: integer
      description: "1: AUDIO, 2: AUDIO 1, 3: AUDIO 2; query via ASVA????"
- id: pc_resolution_check
  label: PC Resolution Check
  kind: query
  command: "PXCK????"
  params: []
  # Returns current resolution as hhh, vvv
- id: pixel_setting_set
  label: Pixel Setting (PC D-SUB, PC RGB)
  kind: action
  command: "PXSL{value}"
  params:
    - name: value
      type: integer
      description: "1: 1360x768, 2: 1280x768, 3: 1024x768, 5: 848x480, 6: 640x480, 7: 1680x1050, 8: 1400x1050, 9: 768 AUTO, 10: 480 AUTO; query via PXSL????; returns WAIT"
- id: av_resolution_check
  label: AV Resolution Check
  kind: query
  command: "RESO????"
  params: []
  # Returns 480i, 480p, 1080i, 720p, 1080p, VGA, etc.
- id: zoom2_special_set
  label: Zoom2 Special Setting (PC D-SUB, PC RGB)
  kind: action
  command: "Z2SP{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via Z2SP????"
- id: scan_mode_set
  label: Scan Mode
  kind: action
  command: "SCAN{value}"
  params:
    - name: value
      type: integer
      description: "0: MODE1, 1: MODE2, 2: MODE3; AV input only; query via SCAN????"
- id: power_management_pc_set
  label: Power Management (PC)
  kind: action
  command: "PMNG{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via PMNG????"
- id: power_management_av_set
  label: Power Management (AV)
  kind: action
  command: "PMAV{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via PMAV????"
- id: color_system_set
  label: Color System
  kind: action
  command: "CSYS{value}"
  params:
    - name: value
      type: integer
      description: "0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43; query via CSYS????"
- id: audio_output_set
  label: Audio Output
  kind: action
  command: "AOUT{value}"
  params:
    - name: value
      type: integer
      description: "0: VARIABLE, 1: FIXED; query via AOUT????"
- id: audio_input_level_set
  label: Audio Input Level
  kind: action
  command: "AIVP{value}"
  params:
    - name: value
      type: integer
      description: "0: 1.0Vrms, 1: 0.5Vrms; query via AIVP????"
- id: self_adjust_set
  label: Self Adjust
  kind: action
  command: "AADJ{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via AADJ????"
- id: auto_input_change_set
  label: Auto Input Change
  kind: action
  command: "AINC{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via AINC????"
- id: enlarge_mode_set
  label: Enlarge Mode
  kind: action
  command: "EMAG{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: 2x2, 2: 3x3, 3: 4x4, 4: 5x5; PC input only; query via EMAG????; returns WAIT"
- id: enlarge_mode_mxn_set
  label: Enlarge Mode MxN
  kind: action
  command: "EMHV{mn}"
  params:
    - name: mn
      type: integer
      description: "11-55; m x n expressed as mn (m = longest direction, n = shortest direction monitors); requires PN-ZB01; returns WAIT"
- id: bezel_width_h_set
  label: Bezel Width (Shorter Side)
  kind: action
  command: "BEZH{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via BEZH????"
- id: bezel_width_v_set
  label: Bezel Width (Longer Side)
  kind: action
  command: "BEZV{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via BEZV????"
- id: image_position_mxn_set
  label: Image Position MxN
  kind: action
  command: "EPHV{mn}"
  params:
    - name: mn
      type: integer
      description: "11-55; ENLARGE POSITION in longest/shortest direction; requires PN-ZB01; returns WAIT"
- id: image_position_set
  label: Image Position
  kind: action
  command: "EPOS{value}"
  params:
    - name: value
      type: integer
      description: "0-3 for 2x2, 0-8 for 3x3, 0-15 for 4x4, 0-24 for 5x5 (position grid, see source); returns WAIT"
- id: enlarge_screen_h_position_set
  label: Enlarged Screen Positioning (Longest Direction)
  kind: action
  command: "EPSH{value}"
  params:
    - name: value
      type: integer
      description: "-999 to 999 (negative as 3 digits); range depends on ENLARGE MODE and IMAGE POSITION; query via EPSH????"
- id: enlarge_screen_v_position_set
  label: Enlarged Screen Positioning (Shortest Direction)
  kind: action
  command: "EPSV{value}"
  params:
    - name: value
      type: integer
      description: "-999 to 999 (negative as 3 digits); query via EPSV????"
- id: enlarge_image_position_setting
  label: Enlarge/Image Position Setting
  kind: action
  command: "ESTG{XXYY}"
  params:
    - name: XXYY
      type: string
      description: "XX: ENLARGE MODE (same values as EMAG), YY: IMAGE POSITION (same values as EPOS)"
- id: enlarge_image_position_setting_mxn
  label: Enlarge/Image Position Setting MxN
  kind: action
  command: "ESHV{XXYY}"
  params:
    - name: XXYY
      type: string
      description: "XX: ENLARGE MODE (same values as EMHV), YY: IMAGE POSITION (same values as EPHV); returns WAIT"
- id: pip_mode_set
  label: PIP Modes
  kind: action
  command: "MWIN{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: PIP, 2: PbyP, 3: PbyP2; query via MWIN????; returns WAIT"
- id: pip_size_set
  label: PIP Size
  kind: action
  command: "MPSZ{value}"
  params:
    - name: value
      type: integer
      description: "1-12; query via MPSZ????"
- id: pip_pos_h_set
  label: PIP Pos (Longest Direction)
  kind: action
  command: "MHPS{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via MHPS????"
- id: pip_pos_v_set
  label: PIP Pos (Shortest Direction)
  kind: action
  command: "MVPS{value}"
  params:
    - name: value
      type: integer
      description: "0-100; query via MVPS????"
- id: pip_pos_batch_set
  label: PIP Pos LD+SD Batch
  kind: action
  command: "MPOS{xxx}{yyy}"
  params:
    - name: xxx
      type: integer
      description: "Longer side position 0-100, 3 digits, no spaces (e.g. MPOS010097)"
    - name: yyy
      type: integer
      description: "Shorter side position 0-100, 3 digits"
- id: pip_blend_set
  label: PIP Blend
  kind: action
  command: "MWBL{value}"
  params:
    - name: value
      type: integer
      description: "0-15; query via MWBL????"
- id: pip_source_set
  label: PIP Source
  kind: action
  command: "MWIP{value}"
  params:
    - name: value
      type: integer
      description: "1: PC DVI-D, 2: PC D-SUB, 3: AV COMPONENT, 4: AV VIDEO, 6: PC RGB, 7: AV DVI-D, 8: AV S-VIDEO, 9: AV HDMI, 10: PC HDMI; query via MWIP????; returns WAIT"
- id: sound_change
  label: Sound Change
  kind: action
  command: "MWAD{value}"
  params:
    - name: value
      type: integer
      description: "1: MAIN, 2: SUB; query via MWAD????"
- id: main_pos_set
  label: Main Pos
  kind: action
  command: "MWPP{value}"
  params:
    - name: value
      type: integer
      description: "0: POS1, 1: POS2; query via MWPP????"
- id: pbyp2_pos_set
  label: PbyP2 Pos
  kind: action
  command: "MW2P{value}"
  params:
    - name: value
      type: integer
      description: "0: POS1, 1: POS2, 2: POS3; query via MW2P????"
- id: pip_auto_off_set
  label: PIP Auto Off
  kind: action
  command: "MOFF{value}"
  params:
    - name: value
      type: integer
      description: "0: MANUAL, 1: AUTO; query via MOFF????"
- id: all_reset
  label: All Reset
  kind: action
  command: "RSET{value}"
  params:
    - name: value
      type: integer
      description: "0: ALL RESET (without PN-ZB01); 0: ALL RESET 1, 1: ALL RESET 2 (with PN-ZB01). Set timeout 30s or longer. ALL RESET 1 also initializes personal info (e-mail addresses); ALL RESET 2 does not"
- id: adjustment_lock_set
  label: Adjustment Lock
  kind: action
  command: "ALCK{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF (operation enabled), 1: disables all operations other than power on/off and FUNCTION, 2: only FUNCTION operation enabled; query via ALCK????"
- id: osd_display_set
  label: OSD Display
  kind: action
  command: "LOSD{value}"
  params:
    - name: value
      type: integer
      description: "0: ON, 1: OFF; query via LOSD????"
- id: led_set
  label: LED
  kind: action
  command: "OFLD{value}"
  params:
    - name: value
      type: integer
      description: "0: ON, 1: OFF; ERR when LOW POWER selected for STANDBY MODE; query via OFLD????"
- id: temperature_alert_set
  label: Temperature Alert
  kind: action
  command: "TALT{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: OSD & LED, 2: LED; query via TALT????"
- id: status_alert_set
  label: Status Alert
  kind: action
  command: "SALT{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: OSD & LED, 2: LED; query via SALT????"
- id: power_button_set
  label: Power Button
  kind: action
  command: "PBTN{value}"
  params:
    - name: value
      type: integer
      description: "0: MONITOR, 1: CONTROLLER; query via PBTN????"
- id: controller_input_set
  label: Controller Input
  kind: action
  command: "PCIP{value}"
  params:
    - name: value
      type: integer
      description: "0: D-SUB, 1: HDMI, 2: DVI-D; ERR when MONITOR selected for POWER BUTTON; query via PCIP????"
- id: screen_size_pc_set
  label: Screen Size (PC)
  kind: action
  command: "WIDE{value}"
  params:
    - name: value
      type: integer
      description: "PC: 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2; AV: 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot (same opcode WIDE for both); query via WIDE????; returns WAIT"
- id: volume_set
  label: Volume
  kind: action
  command: "VOLM{value}"
  params:
    - name: value
      type: integer
      description: "0-31, zero-padded 4 digits (e.g. VOLM0030); query VOLM???? returns current volume (e.g. 30)"
- id: mute_set
  label: Mute
  kind: action
  command: "MUTE{value}"
  params:
    - name: value
      type: integer
      description: "0: OFF, 1: ON; query via MUTE????"
- id: model_name_query
  label: Model Name Information
  kind: query
  command: "INF1????"
  params: []
  # Returns model name value
- id: serial_number_query
  label: Serial Number Information
  kind: query
  command: "SRNO????"
  params: []
  # Returns serial number value
- id: backlight_brightness_set
  label: Backlight Brightness
  kind: action
  command: "VLMP{value}"
  params:
    - name: value
      type: integer
      description: "0-31; query via VLMP????"
- id: temperature_sensor_status_query
  label: Temperature Sensor Status
  kind: query
  command: "DSTA????"
  params: []
  # Returns 0-4, see temperature_sensor_status feedback
- id: temperature_acquisition_query
  label: Temperature Acquisition
  kind: query
  command: "ERRT????"
  params: []
  # Returns [Sensor1],[Sensor2],[Sensor3]; 126 indicates sensor abnormality
- id: standby_cause_init
  label: Cause of Last Standby Initialization
  kind: action
  command: "STCA0000"
  params: []
- id: standby_cause_query
  label: Cause of Last Standby Mode
  kind: query
  command: "STCA????"
  params: []
  # Returns 0/1/2/3/4/6/8, see standby_cause feedback
- id: gamma_red_transfer
  label: Red Gamma Data Transfer
  kind: action
  command: "UGRW{aa}{xxxx...xxxx}{cc}"
  params:
    - name: aa
      type: integer
      description: "Block number 01-16 (512 data pieces split into 16 blocks of 32)"
    - name: xxxx
      type: string
      description: "32 pieces of 4-digit user data (0000-1023), zero-padded to 4 digits"
    - name: cc
      type: string
      description: "Checksum: lower-order 1 byte (hex 0-F) ASCII of sum of block number + 32 data pieces"
- id: gamma_green_transfer
  label: Green Gamma Data Transfer
  kind: action
  command: "UGGW{aa}{xxxx...xxxx}{cc}"
  params:
    - name: aa
      type: integer
      description: "Block number 01-16"
    - name: xxxx
      type: string
      description: "32 pieces of 4-digit user data (0000-1023)"
    - name: cc
      type: string
      description: "Checksum (same as UGRW)"
- id: gamma_blue_transfer
  label: Blue Gamma Data Transfer
  kind: action
  command: "UGBW{aa}{xxxx...xxxx}{cc}"
  params:
    - name: aa
      type: integer
      description: "Block number 01-16"
    - name: xxxx
      type: string
      description: "32 pieces of 4-digit user data (0000-1023)"
    - name: cc
      type: string
      description: "Checksum (same as UGRW)"
- id: gamma_red_read
  label: Red Gamma Data Read
  kind: query
  command: "UGRR{aa}"
  params:
    - name: aa
      type: integer
      description: "Block number 1-16; returns 32 pieces of user data (value from temporary display memory, not stored value)"
- id: gamma_green_read
  label: Green Gamma Data Read
  kind: query
  command: "UGGR{aa}"
  params:
    - name: aa
      type: integer
      description: "Block number 1-16"
- id: gamma_blue_read
  label: Blue Gamma Data Read
  kind: query
  command: "UGBR{aa}"
  params:
    - name: aa
      type: integer
      description: "Block number 1-16"
- id: gamma_user_data_initialize
  label: Gamma User Data Initialize
  kind: action
  command: "UGRS0000"
  params: []
- id: gamma_user_data_save
  label: Gamma User Data Save
  kind: action
  command: "UGSV0000"
  params: []
  # Saves transferred user data; otherwise cleared at main power off or LOW POWER standby

Feedbacks

- id: ok_response
  type: string
  values: ["OK"]
  # Returned after command executed correctly; with ID assigned: "OK 001" (space + ID)
- id: err_response
  type: string
  values: ["ERR"]
  # No relevant command or command unusable in current state
- id: wait_response
  type: string
  values: ["WAIT"]
  # Repeater control, IDSL/IDLK, or RSET/INPS/ASNC/WIDE/EMAG/EPOS/PXSL/POWR/AGIN/MWIN/MWIP/MWPP/ESTG/EMHV/EPHV/ESHV in progress; do not send commands; no ID attached
- id: locked_response
  type: string
  values: ["LOCKED"]
  # RS-232C control locked by operation lock (ALCK)
- id: unselected_response
  type: string
  values: ["UNSELECTED"]
  # Returned when RS-232C/LAN SELECT is set to LAN
- id: power_state
  type: enum
  values: [standby, normal, input_signal_waiting]
  # POWR???? reply: 0/1/2
- id: input_mode
  type: enum
  values: [pc_dvi_d, pc_d_sub, av_component, av_video, pc_rgb, av_dvi_d, av_s_video, av_hdmi, pc_hdmi]
  # INPS???? reply: 1/2/3/4/6/7/8/9/10
- id: volume_level
  type: integer
  values: "0-31"
  # VOLM???? reply
- id: id_number
  type: integer
  values: "0-255"
  # IDST???? reply; 0 = no ID assigned; responses append " nnn" (space + 3-digit ID) when ID assigned
- id: model_name
  type: string
  # INF1???? reply
- id: serial_number
  type: string
  # SRNO???? reply
- id: temperature_sensor_status
  type: enum
  values: [normal, abnormal_standby, abnormal_recovered, abnormal_backlight_dimmed, sensor_abnormal]
  # DSTA???? reply: 0/1/2/3/4
- id: sensor_temperatures
  type: string
  # ERRT???? reply "[Sensor1],[Sensor2],[Sensor3]"; 126 = sensor abnormality
- id: standby_cause
  type: enum
  values: [no_error, power_button, main_power_switch, rs232c_or_lan, no_signal, abnormal_temperature, schedule]
  # STCA???? reply: 0/1/2/3/4/6/8
- id: pc_resolution
  type: string
  # PXCK???? reply "hhh, vvv"
- id: av_resolution
  type: string
  # RESO???? reply: 480i, 480p, 1080i, 720p, 1080p, VGA, etc.

Variables

# All settable parameters in this source are exposed as discrete RS-232C commands
# and are represented as Actions above (VOLM, VLMP, CONT, etc.).
# UNRESOLVED: no additional settable parameters outside the command table found in source.

Events

# No unsolicited protocol-level notifications documented in source.
# Temperature Alert (TALT) and Status Alert (SALT) notify via OSD/LED only, not via RS-232C messages.
# UNRESOLVED: LAN/e-mail notification content (PN-ZB01) not detailed in source.

Macros

- id: auto_assign_ids_repeater
  label: Auto-assign ID numbers to daisy chain
  steps:
    - "IDST001+"  # repeater control (4th param char "+") assigns sequential IDs to all monitors
  notes: "Responses returned by all connected monitors; send next command only after last monitor replies"
- id: gamma_user_data_upload
  label: Upload and activate GAMMA user data
  steps:
    - "UGRW{block}{data}{checksum} x16 blocks (red)"
    - "UGGW{block}{data}{checksum} x16 blocks (green)"
    - "UGBW{block}{data}{checksum} x16 blocks (blue)"
    - "UGSV0000"  # save to monitor, otherwise cleared at main power off or LOW POWER standby
    - "GAMM0004"  # activate by selecting USER gamma
  notes: "512 data pieces per color, 32 per block; checksum = lower-order 1 byte ASCII hex of block number + data sum"

Safety

confirmation_required_for: []
interlocks: []
# UNRESOLVED: source contains no explicit safety warnings, interlock procedures, or
# power-on sequencing requirements for control. Temperature abnormality handling
# (standby, backlight dimming) is automatic device behavior, not a control-side interlock.

Notes

Command format: 4-character command field + 4-character parameter field (exactly 4 chars, pad with spaces, e.g. "VOLM 30" written as VOLM0030; wrong: VOLM30). Return code 0DH or 0AH (or both) terminates commands/responses.
Negative parameters: 3-digit numeric with minus (e.g. AUTR-009). No spaces allowed for MPOS, DATE, SC01-SC08.
Daisy chain: up to 25 monitors via RS-232C in/out terminals; all monitors must use same baud rate; assign unique IDs (0-255, 0 = no ID). IDSL targets next command only; IDLK persists until canceled (IDLK0000) or power off; repeater control cancels ID designation.
Repeater control: set 4th parameter character to "+" (e.g. VOLM030+) to command all monitors; all monitors respond. Cannot be used in LOW POWER standby.
Timing: wait for OK/ERR before next command; response timeout 10s or longer (daisy chain: monitor position x 10s, e.g. 3rd monitor = 30s); ALL RESET needs 30s+; POWER ON DELAY active: timeout = delay + 10s; minimum 100 ms between response and next command.
WAIT returned for: repeater control, IDSL/IDLK, and commands RSET, INPS, ASNC, WIDE, EMAG, EPOS, PXSL, POWR, AGIN, MWIN, MWIP, MWPP, ESTG, EMHV, EPHV, ESHV. No ID attached to WAIT. Do not send commands during WAIT.
If no monitor matches designated ID (e.g. IDSL0002 with no ID 2 present), no response returned. Bad connection = no response at all (not even ERR).
PN-ZB01 (optional) required for LAN, EMHV/EPHV/ESHV and some commands marked in table with (A)/(B) columns; RS-232C and LAN control cannot be used simultaneously (CTLS selects). UNSELECTED returned over RS-232C when CTLS = LAN.
Factory LAN defaults (PN-ZB01): IP 192.168.150.2, subnet 255.255.255.0, gateway 0.0.0.0; configure PC as 192.168.150.3 to access via Internet Explorer.
STANDBY MODE LOW POWER restricts standby-mode commands (marked "-" in table) and repeater control in standby; OFF LED unavailable in LOW POWER.
ALL RESET 1 (with PN-ZB01) initializes personal information including registered e-mail addresses — relevant before transfer/disposal.
ARST opcode covers three resets (1=SCREEN, 2=PICTURE, 3=AUDIO); WIDE opcode covers both PC and AV screen-size mappings with different value meanings.

Provenance

source_domains:
  - business.sharpusa.com
source_urls:
  - https://business.sharpusa.com/portals/0/downloads/Manuals/mon_man_PNE421_471.pdf
  - https://business.sharpusa.com/portals/0/downloads/Manuals/mon_man_PNE521_601.pdf
  - https://business.sharpusa.com/portals/0/downloads/Manuals/mon_man_PNE521_601_install.pdf
  - https://business.sharpusa.com/Portals/0/downloads/Manuals/PN_E603_703_Operation_Manual.pdf
retrieved_at: 2026-05-01T02:57:30.386Z
last_checked_at: 2026-09-19T22:17:16.715Z

Verification Summary

verdict: verified
checked_at: 2026-09-19T22:17:16.715Z
matched_actions: 143
action_count: 143
confidence: medium
summary: "All 143 spec actions map to distinct 4-char opcodes in the RS-232C command table; transport values verified; source command catalogue fully represented. (10 unresolved item(s) noted in Known Gaps.)"

Known Gaps

- "LAN control method details (port, URL paths, API) not documented in source — only web-browser access mentioned."
- "exact model list covered by this manual — only PN-E421 explicitly named in source text."
- "firmware version compatibility not stated in source."
- "no URL/path pattern stated in source"
- "port number not stated in source"
- "no additional settable parameters outside the command table found in source."
- "LAN/e-mail notification content (PN-ZB01) not detailed in source."
- "source contains no explicit safety warnings, interlock procedures, or"
- "LAN control protocol details (port, HTTP API, e-mail notification format) not stated in source."
- "LANG full 0-14 code mapping partially illegible in source table."

From the AI4AV catalog (https://ai4av.net) · ODbL-1.0

Sharp Electronics PN-E Series Control Spec

Summary

Transport

Traits

Actions

Feedbacks

Variables

Events

Macros

Safety

Notes

Provenance

Verification Summary

Known Gaps

Source & contribution

Sharp Electronics PN-E Series Control Spec

Summary

Transport

Traits

Actions

Feedbacks

Variables

Events

Macros

Safety

Notes

Provenance

Verification Summary

Known Gaps

Source & contribution