AI4AVSummary
Philips Professional Signage Displays of the xxBDL4150D Series (Himalaya 2.0 platform) controlled via the SICP V2.03 (Serial/Ethernet Interface Communication Protocol). Transport is RS-232C or TCP/IP (port 5000). Commands are binary packets MsgSize Control Group Data[0..N] Checksum where Data[0] is the opcode; the display replies with ACK (0x06), NACK (0x15), or NAV (0x18). This spec enumerates all documented Set and Get/Report commands.
Transport
protocols:
- tcp
- serial
addressing:
port: 5000 # TCP/IP port 5000 used by default for control in all displays
serial:
baud_rate: 9600 # default; supported: 1200, 2400, 4800, 9600, 19200, 38400, 57600
data_bits: 8
parity: none
stop_bits: 1
flow_control: none
auth:
type: none # inferred: no auth procedure in source
Packet framing (applies to both transports):
- Byte 1
MsgSize= total message length, range 0x03–0x28. - Byte 2
Control= Monitor ID (1–255 signal mode; 0 = broadcast, no ACK). - Byte 3
Group= Group ID (0 = no group / broadcast; 1–254 = control by group; omitted when group is off). - Bytes 4..N
Data[0..N]= payload;Data[0]is the command opcode. - Last byte
Checksum= XOR of all preceding bytes. - Reply after each command within 500 ms; ACK
06 01 00 00 06 00, NACK06 01 00 00 15 12, NAV06 01 00 00 18 1F(address 01). Get commands are answered with a Report packet, not an ACK.
Traits
traits:
- powerable # inferred: power on/off commands present (0x18/0x19)
- queryable # inferred: many Get/Report query commands present
- levelable # inferred: volume / brightness / contrast / color gain commands present
- routable # inferred: input source select + PIP/tiling routing commands present
Actions
# Packet layout for every action: MsgSize Control Group Data[0] [Data[1..N]] Checksum.
# Examples below use Control=0x01 (Monitor ID 1) and Group=0x00 (no group) - verbatim from source.
# Parameterized actions show {var} placeholders; checksum must be recomputed for each value.
# Source: SICP V2.03. All opcodes are the literal Data[0] byte.
# ---------- Communication / System ----------
- id: comm_control_report
label: Communication Control Report (ACK/NACK/NAV)
kind: feedback
command: "06 01 00 00 {status} {checksum}" # status: 0x06 ACK / 0x15 NACK / 0x18 NAV
params:
- name: status
type: integer
description: "0x06=ACK, 0x15=NACK, 0x18=NAV"
notes: Generic report returned after Get/Set.
- id: get_platform_version
label: Get Platform and Version Labels
kind: query
command: "06 01 00 A2 {label} {checksum}" # label: 0x00 SICP ver / 0x01 platform label / 0x02 platform version
params:
- name: label
type: integer
description: "0x00=SICP impl version, 0x01=platform label, 0x02=platform version"
notes: Report DATA[0]=0xA2, DATA[1..N]=ASCII chars (≤36).
- id: get_model_fw_date
label: Get Model Number, FW Version, Build Date
kind: query
command: "06 01 00 A1 {item} {checksum}" # item: 0x00 Model / 0x01 FW / 0x02 Build Date / 0x03 Android FW
params:
- name: item
type: integer
description: "0x00=Model Number, 0x01=FW version, 0x02=Build Date, 0x03=Android FW build"
notes: Report DATA[0]=0xA1, DATA[1..N]=ASCII chars (≤36).
- id: set_monitor_restart
label: Monitor Restart
kind: action
command: "06 01 00 57 {target} {checksum}" # 0x00=Android, 0x01=Scalar
params:
- name: target
type: integer
description: "0x00=Android, 0x01=Scalar"
notes: Only on Android monitors (Himalaya 2 / Dragon 2 / future).
- id: set_factory_reset
label: Factory Reset
kind: action
command: "05 01 00 56 52"
params: []
notes: Resets all configurable parameters listed in section 7.18.
- id: set_screenshot_email
label: Take Screenshot and Email
kind: action
command: "05 01 00 58 5C"
params: []
notes: Android monitors only (Himalaya 2 / Dragon 2). Saves {yyyy-MM-dd-HH-mm-ss}.png.
- id: set_monitor_id
label: Set Monitor ID
kind: action
command: "06 {old_id} 00 69 {new_id} {checksum}"
params:
- name: old_id
type: integer
description: Current monitor ID (Control byte), 1-254
- name: new_id
type: integer
description: New monitor ID, 0x01-0xFE (1-254)
- id: set_group_id
label: Set Group ID
kind: action
command: "06 01 00 5C {group_id} {checksum}" # 0x01-0xFE = 1-254; 0xFF = Off (legacy)
params:
- name: group_id
type: integer
description: "1-254 = group; 0xFF = off (legacy)"
- id: get_group_id
label: Get Group ID
kind: query
command: "05 01 00 5D 59"
params: []
- id: anytile_set_group_monitor_id
label: AnyTile Set Group ID and Monitor ID (IP only)
kind: action
command: "06 01 00 C0 {monitor_id} {group_id} {checksum}"
params:
- name: monitor_id
type: integer
- name: group_id
type: integer
notes: Works only via IP connection, not RS-232.
- id: set_display_monitor_id_osd
label: Display Monitor ID on Screen (Set)
kind: action
command: "06 01 00 4C {enable} {checksum}" # 0x01=show, 0x00=hide (per source table)
params:
- name: enable
type: integer
description: "0x01=show monitor ID, 0x00=hide"
# ---------- Power ----------
- id: set_power
label: Set Power State
kind: action
command: "06 01 00 18 {state} {checksum}" # 0x01=Off, 0x02=On
params:
- name: state
type: integer
description: "0x01=Power Off, 0x02=On"
traits: [powerable]
- id: get_power
label: Get Power State
kind: query
command: "05 01 00 19 1D"
params: []
notes: Report DATA[1]: 0x01=Off, 0x02=On.
- id: set_power_cold_start
label: Set Power State at Cold Start
kind: action
command: "06 01 00 A3 {state} {checksum}" # 0x00=Off, 0x01=Forced On, 0x02=Last Status
params:
- name: state
type: integer
description: "0x00=Off, 0x01=Forced On, 0x02=Last Status"
- id: get_power_cold_start
label: Get Power State at Cold Start
kind: query
command: "05 01 00 A4 A0"
params: []
- id: set_apm
label: Set APM (Advanced Power Management) Status
kind: action
command: "06 01 00 D0 {mode} {checksum}" # 0x00=Off, 0x01=On, 0x02=Mode1 (TCP off/WOL on), 0x03=Mode2 (TCP on/WOL off)
params:
- name: mode
type: integer
description: "0x00=Off, 0x01=On, 0x02=Mode1, 0x03=Mode2"
notes: Himalaya supports off/Mode1/Mode2 only.
- id: get_apm
label: Get APM Status
kind: query
command: "05 01 00 D1 D5"
params: []
- id: set_power_saving_mode
label: Set Power Saving Mode
kind: action
command: "06 01 00 D2 {mode} {checksum}" # 0x00-0x07 (see notes)
params:
- name: mode
type: integer
description: "0x00=RGB off & Video off, 0x01=RGB off Video on, 0x02=RGB on Video off, 0x03=both on, 0x04-0x07=modes 1-4"
- id: get_power_saving_mode
label: Get Power Saving Mode
kind: query
command: "05 01 00 D3 D7"
params: []
- id: set_smart_power
label: Set Smart Power (Backlight Dimming)
kind: action
command: "06 01 00 DD {level} {checksum}" # 0x00=Off, 0x01=Low, 0x02=Medium, 0x03=High
params:
- name: level
type: integer
description: "0x00=Off, 0x01=Low, 0x02=Medium, 0x03=High"
- id: get_smart_power
label: Get Smart Power
kind: query
command: "05 01 00 DE DA"
params: []
- id: set_eco_mode
label: Set ECO Mode
kind: action
command: "06 01 00 64 {mode} {checksum}" # 0x00=low power standby, 0x01=normal
params:
- name: mode
type: integer
description: "0x00=low power standby, 0x01=normal"
notes: Phoenix 1 & 2 platform only.
- id: get_eco_mode
label: Get ECO Mode
kind: query
command: "05 01 00 63 67"
params: []
- id: set_off_timer
label: Set Off Timer
kind: action
command: "06 01 00 92 {hours} {checksum}" # 0x00=Off, 0x01-0x18 = 1-24 hours
params:
- name: hours
type: integer
description: "0=Off, 1-24 hours"
- id: get_off_timer
label: Get Off Timer
kind: query
command: "05 01 00 91 95"
params: []
- id: set_backlight
label: Set Backlight (Picture Mute)
kind: action
command: "06 01 00 72 {state} {checksum}" # 0x00=on, 0x01=off
params:
- name: state
type: integer
description: "0x00=backlight on, 0x01=backlight off (audio unaffected)"
- id: get_backlight
label: Get Backlight (Picture Mute) Status
kind: query
command: "05 01 00 71 50"
params: []
notes: Report 06 01 00 71 00 76 = on; 06 01 00 71 01 77 = off.
# ---------- Lock / Input Control ----------
- id: set_ir_lock
label: Set IR Remote Control Lock
kind: action
command: "06 01 00 1C {state} {checksum}" # 0x01 Unlock all / 0x02 Lock all / 0x03 Lock all but Power / 0x04 Lock all but Volume / 0x05 Primary / 0x06 Secondary / 0x07 Lock all except Power & Volume
params:
- name: state
type: integer
description: "0x01=Unlock all, 0x02=Lock all, 0x03=Lock all but Power, 0x04=Lock all but Volume, 0x05=Primary, 0x06=Secondary, 0x07=Lock all except Power & Volume"
- id: get_ir_lock
label: Get IR Remote Control Lock
kind: query
command: "05 01 00 1D 19"
params: []
- id: set_keypad_lock
label: Set Keypad Lock
kind: action
command: "06 01 00 1A {state} {checksum}" # 0x01 Unlock all / 0x02 Lock all / 0x03 Lock all but Power / 0x04 Lock all but Volume / 0x07 Lock all except Power & Volume
params:
- name: state
type: integer
description: "0x01=Unlock all, 0x02=Lock all, 0x03=Lock all but Power, 0x04=Lock all but Volume, 0x07=Lock all except Power & Volume"
- id: get_keypad_lock
label: Get Keypad Lock
kind: query
command: "05 01 00 1B 1F"
params: []
- id: set_external_storage_lock
label: Set MicroSD and USB Ports Lock
kind: action
command: "06 01 00 F1 {state} {checksum}" # 0x00=unlocked, 0x01=Locked
params:
- name: state
type: integer
description: "0x00=unlocked, 0x01=locked"
notes: Locks/unlocks all MicroSD + USB-A + microUSB ports at once. 10BDL3051T / Dragon 1.x / 1.6 / QL3.
- id: get_external_storage_lock
label: Get MicroSD and USB Ports Lock
kind: query
command: "05 01 00 F2 F6"
params: []
# ---------- Input Source / Failover ----------
- id: set_input_source
label: Set Input Source
kind: action
command: "09 01 00 AC {source} {playlist} {osd_style} {mute_style} {checksum}"
params:
- name: source
type: integer
description: "0x01=VIDEO, 0x02=S-VIDEO, 0x03=COMPONENT, 0x05=VGA, 0x06=HDMI2, 0x07=DP2, 0x08=USB2, 0x09=DVI-D, 0x0A=DP1, 0x0B=OPS, 0x0C=USB, 0x0D=HDMI, 0x0E=DVI-D, 0x0F=HDMI3, 0x10=BROWSER, 0x11=SMARTCMS, 0x12=DMS, 0x13=INTERNAL STORAGE, 0x16=Media Player, 0x17=PDF Player, 0x18=Custom, 0x19=HDMI4, 0x1A=VGA2, 0x1B=VGA3, 0x1C=IWB"
- name: playlist
type: integer
description: "Playlist/URL number (1-7) for Media/PDF/Browser; 0 otherwise"
- name: osd_style
type: integer
description: "Bit6=do-not-switch flag, Bits2..0=source display style (1=label)"
- name: mute_style
type: integer
description: "Reserved bits, default 0x00"
traits: [routable]
notes: Minimal form is "09 01 00 AC {source} 09 01 00 {checksum}".
- id: get_current_source
label: Get Current Input Source
kind: query
command: "05 01 00 AD A9"
params: []
- id: set_auto_signal_detecting
label: Set Auto Signal Detecting
kind: action
command: "06 01 00 AE {mode} {checksum}" # 0x00=Off, 0x01=All, 0x03=PC sources only, 0x04=Video sources only, 0x05=Failover
params:
- name: mode
type: integer
description: "0x00=Off, 0x01=All, 0x03=PC only, 0x04=Video only, 0x05=Failover"
- id: get_auto_signal_detecting
label: Get Auto Signal Detecting
kind: query
command: "05 01 00 AF AB"
params: []
- id: set_failover_priority
label: Set Failover Priority List
kind: action
command: "0D 01 00 A5 {p1} {p2} {p3} {p4} {p5} {p6} {p7} {p8} {p9} {p10} {p11} {p12} {p13} {checksum}"
params:
- name: p1
type: integer
description: 1st priority source (0x00=HDMI … 0x16=IWB)
notes: Up to 14 priority slots; each value uses the source-type table.
- id: get_failover_priority
label: Get Failover Priority List
kind: query
command: "05 01 00 A6 A2"
params: []
# ---------- Video / Picture ----------
- id: set_video_parameters
label: Set Video Parameters
kind: action
command: "0C 01 00 32 {brightness} {color} {contrast} {sharpness} {tint} {black_level} {gamma} {checksum}"
params:
- name: brightness
type: integer
description: "0-100 (%)"
- name: color
type: integer
description: "0-100 (%)"
- name: contrast
type: integer
description: "0-100 (%)"
- name: sharpness
type: integer
description: "0-100 (%)"
- name: tint
type: integer
description: "0-100 (%)"
- name: black_level
type: integer
description: "0-100 (%)"
- name: gamma
type: integer
description: "0x01=Native, 0x02=S gamma, 0x03=2.2, 0x04=2.4, 0x05=D-image (DICOM)"
traits: [levelable]
notes: Not on QL3 platform for browser/PDF/media/CMND&play/installed apk sources.
- id: get_video_parameters
label: Get Video Parameters
kind: query
command: "05 01 00 33 37"
params: []
- id: set_color_temperature
label: Set Color Temperature Preset
kind: action
command: "06 01 00 34 {preset} {checksum}" # 0x00 User1 / 0x01 Native / 0x03 10000K … 0x12 User2 (see notes)
params:
- name: preset
type: integer
description: "0x00=User1, 0x01=Native, 0x03=10000K, 0x04=9300K, 0x05=7500K, 0x06=6500K, 0x09=5000K, 0x0A=4000K, 0x0D=3000K, 0x12=User2"
- id: get_color_temperature
label: Get Color Temperature Preset
kind: query
command: "05 01 00 35 31"
params: []
- id: set_color_temperature_100k
label: Set Color Temperature 100K Steps
kind: action
command: "06 01 00 11 {steps} {checksum}" # 0x14(20)=2000K … 0x64(100)=10000K
params:
- name: steps
type: integer
description: "20-100 (0x14-0x64), step=100K"
- id: get_color_temperature_100k
label: Get Color Temperature 100K Steps
kind: query
command: "05 01 00 12 16"
params: []
- id: set_rgb_parameters
label: Set RGB Gain/Offset
kind: action
command: "0B 01 00 36 {r_gain} {g_gain} {b_gain} {r_offset} {g_offset} {b_offset} {checksum}"
params:
- name: r_gain
type: integer
description: "0-255"
- name: g_gain
type: integer
description: "0-255"
- name: b_gain
type: integer
description: "0-255"
- name: r_offset
type: integer
description: "0-255"
- name: g_offset
type: integer
description: "0-255"
- name: b_offset
type: integer
description: "0-255"
- id: get_rgb_parameters
label: Get RGB Gain/Offset
kind: query
command: "05 01 00 37 33"
params: []
- id: set_vga_video_parameters
label: Set VGA Video Parameters
kind: action
command: "09 01 00 38 {clock} {phase} {h_pos} {v_pos} {checksum}"
params:
- name: clock
type: integer
description: "0-100 (%)"
- name: phase
type: integer
description: "0-100 (%)"
- name: h_pos
type: integer
description: "0-100 (%)"
- name: v_pos
type: integer
description: "0-100 (%)"
- id: get_vga_video_parameters
label: Get VGA Video Parameters
kind: query
command: "05 01 00 39 3D"
params: []
- id: set_picture_format
label: Set Picture Format
kind: action
command: "06 01 00 3A {format} {checksum}" # 0x00 Normal / 0x01 Custom / 0x02 Real / 0x03 Full / 0x04 21:9 / 0x05 Dynamic / 0x06 16:9
params:
- name: format
type: integer
description: "0x00=Normal, 0x01=Custom, 0x02=Real, 0x03=Full, 0x04=21:9, 0x05=Dynamic, 0x06=16:9"
- id: get_picture_format
label: Get Picture Format
kind: query
command: "05 01 00 3B 3F"
params: []
- id: set_picture_style
label: Set Picture Style
kind: action
command: "06 01 00 66 {style} {checksum}" # 0x00 Highbright / 0x01 sRGB / 0x02 Vivid / 0x03 Natural / 0x04 Standard / 0x05 Video / 0x06 Static Signage / 0x07 Text / 0x08 Energy saving / 0x09 Soft / 0x0A User
params:
- name: style
type: integer
description: "0x00=Highbright, 0x01=sRGB, 0x02=Vivid, 0x03=Natural, 0x04=Standard, 0x05=Video, 0x06=Static Signage, 0x07=Text, 0x08=Energy saving, 0x09=Soft, 0x0A=User"
notes: Phoenix 1 & 2 platform only.
- id: get_picture_style
label: Get Picture Style
kind: query
command: "05 01 00 65 61"
params: []
- id: set_pip
label: Set Picture-in-Picture
kind: action
command: "09 01 00 3C {pip_mode} {position} 00 00 {checksum}"
params:
- name: pip_mode
type: integer
description: "0x00=Off, 0x01=PIP, 0x02=POP, 0x03=Quick swap, 0x04=PBP 2win, 0x05=PBP 3win, 0x06=PBP 4win, 0x07=PBP 3win-1, 0x08=PBP 3win-2, 0x09=PBP 4win-1, 0x0A=SICP (Custom)"
- name: position
type: integer
description: "0x00-0x04 PIP window position"
- id: get_pip
label: Get Picture-in-Picture
kind: query
command: "05 01 00 3D 39"
params: []
- id: set_pip_source
label: Set PIP Source
kind: action
command: "09 01 00 84 FD {q2} {q3} {q4} {checksum}" # source-type 0xFD = input source
params:
- name: q2
type: integer
description: Q2 source number (source-type table)
- name: q3
type: integer
description: Q3 source number
- name: q4
type: integer
description: Q4 source number
notes: Minimal form "07 01 00 84 FD {src} {checksum}".
- id: get_pip_source
label: Get PIP Source
kind: query
command: "05 01 00 85 81"
params: []
- id: set_scan_mode
label: Set Scan Mode (Over/Under scan)
kind: action
command: "06 01 00 50 {mode} {checksum}" # 0x00=Over scan, 0x01=Under scan, 0x02=Off, 0x03-0x1C=0-25 (challenger 2.1)
params:
- name: mode
type: integer
description: "0x00=Over scan, 0x01=Under scan, 0x02=Off"
- id: get_scan_mode
label: Get Scan Mode
kind: query
command: "05 01 00 51 55"
params: []
- id: set_scan_conversion
label: Set Scan Conversion (Progressive/Interlace)
kind: action
command: "06 01 00 52 {mode} {checksum}" # 0x00=Progressive, 0x01=Interlace
params:
- name: mode
type: integer
description: "0x00=Progressive, 0x01=Interlace"
notes: Not on Himalaya 1.0/1.2, Dragon 1.x/1.6.
- id: get_scan_conversion
label: Get Scan Conversion
kind: query
command: "05 01 00 53 57"
params: []
- id: set_noise_reduction
label: Set Noise Reduction
kind: action
command: "06 01 00 2A {level} {checksum}" # 0x00 Off / 0x01 Low / 0x02 Middle / 0x03 High / 0x04 default
params:
- name: level
type: integer
description: "0x00=Off, 0x01=Low, 0x02=Middle, 0x03=High, 0x04=default"
- id: get_noise_reduction
label: Get Noise Reduction
kind: query
command: "05 01 00 2B 2F"
params: []
- id: set_memc_effect
label: Set MEMC Effect
kind: action
command: "06 01 00 28 {level} {checksum}" # 0x00 Off / 0x01 Low / 0x02 Medium / 0x03 High
params:
- name: level
type: integer
description: "0x00=Off, 0x01=Low, 0x02=Medium, 0x03=High"
notes: Not on Himalaya 1.0/1.2, Dragon 1.x/1.6.
- id: get_memc_effect
label: Get MEMC Effect
kind: query
command: "05 01 00 29 2D"
params: []
- id: set_pixel_shift
label: Set Pixel Shift
kind: action
command: "06 01 00 B2 {interval} {checksum}" # 0x00=Off, 0x01=10s … 0x5A=900s, 0x5B=AUTO
params:
- name: interval
type: integer
description: "0=Off, 1=10s … 90=900s, 0x5B=AUTO"
notes: Dragon 1.0/1.5 only.
- id: get_pixel_shift
label: Get Pixel Shift
kind: query
command: "05 01 00 B1 B5"
params: []
- id: set_auto_adjust
label: VGA Auto Adjust
kind: action
command: "07 01 00 70 40 00 36"
params: []
- id: set_display_orientation
label: Set Display Orientation
kind: action
command: "0C 01 00 17 {auto_rotate} {osd_rotation} {image_all} {win1} {win2} {win3} {win4} {checksum}"
params:
- name: auto_rotate
type: integer
description: "0x00=Off, 0x01=On (Dragon 1/1.5 only)"
- name: osd_rotation
type: integer
description: "0x00=Landscape, 0x01=Portrait"
- name: image_all
type: integer
description: "0x00=Off, 0x01=On, 0x02=On CW (CRD50), 0x03=On CCW (CRD50)"
- name: win1
type: integer
description: "0x00=Off, 0x01=On"
- name: win2
type: integer
description: "0x00=Off, 0x01=On"
- name: win3
type: integer
description: "0x00=Off, 0x01=On"
- name: win4
type: integer
description: "0x00=Off, 0x01=On"
notes: Himalaya 2.0 supports OSD Rotation (DATA[2]) and main-window image rotation (DATA[4]) only.
- id: get_display_orientation
label: Get Display Orientation
kind: query
command: "05 01 00 16 12"
params: []
- id: set_osd_rotating
label: Set OSD Rotating
kind: action
command: "06 01 00 26 {state} {checksum}" # 0x00=Off, 0x01=On
params:
- name: state
type: integer
description: "0x00=Off, 0x01=On"
- id: get_osd_rotating
label: Get OSD Rotating
kind: query
command: "05 01 00 27 23"
params: []
- id: set_information_osd
label: Set Information OSD Feature
kind: action
command: "06 01 00 2C {timeout} {checksum}" # 0x00=Off, 0x01-0x3C=1-60 sec
params:
- name: timeout
type: integer
description: "0=Off, 1-60 seconds"
- id: get_information_osd
label: Get Information OSD Feature
kind: query
command: "05 01 00 2D 29"
params: []
- id: set_touch_feature
label: Set Touch Feature
kind: action
command: "06 01 00 1E {state} {checksum}" # 0x00=Off, 0x01=On
params:
- name: state
type: integer
description: "0x00=Off, 0x01=On"
notes: Not on Himalaya 1.0/1.2, Dragon 1.x/2.0.
- id: get_touch_feature
label: Get Touch Feature
kind: query
command: "05 01 00 1F 1B"
params: []
- id: set_power_on_logo
label: Set Power On Logo
kind: action
command: "06 01 00 3E {state} {checksum}" # 0x00=Off, 0x01=On, 0x02=User
params:
- name: state
type: integer
description: "0x00=Off, 0x01=On, 0x02=User"
- id: get_power_on_logo
label: Get Power On Logo Status
kind: query
command: "05 01 00 3F 3B"
params: []
# ---------- Audio ----------
- id: set_volume
label: Set Volume (Speaker + Audio Out)
kind: action
command: "07 01 00 44 {speaker} {audio_out} {checksum}"
params:
- name: speaker
type: integer
description: "0-100 (%) speaker out"
- name: audio_out
type: integer
description: "0-100 (%) variable audio out"
traits: [levelable]
notes: Platforms without variable audio out (Himalaya 1/1.2, Eagle) omit DATA[2]: "06 01 00 44 {speaker} {checksum}".
- id: get_volume
label: Get Volume
kind: query
command: "05 01 00 45 41"
params: []
- id: set_volume_step
label: Set Volume Step Up/Down
kind: action
command: "07 01 00 41 {speaker_dir} {audio_dir} {checksum}" # 0=down, 1=up, 2=no change
params:
- name: speaker_dir
type: integer
description: "0=down, 1=up, 2=no change"
- name: audio_dir
type: integer
description: "0=down, 1=up, 2=no change"
- id: set_volume_mute
label: Set Volume Mute
kind: action
command: "06 01 00 47 {state} {checksum}" # 0x00=mute off, 0x01=mute on
params:
- name: state
type: integer
description: "0x00=off, 0x01=on"
- id: get_volume_mute
label: Get Volume Mute
kind: query
command: "05 01 00 46 42"
params: []
- id: set_audio_parameters
label: Set Audio Parameters (Treble/Bass)
kind: action
command: "07 01 00 42 {treble} {bass} {checksum}"
params:
- name: treble
type: integer
description: "0-100 (%) [Phoenix 2.0: -8..8, two's-complement]"
- name: bass
type: integer
description: "0-100 (%) [Phoenix 2.0: -8..8, two's-complement]"
- id: get_audio_parameters
label: Get Audio Parameters
kind: query
command: "05 01 00 43 47"
params: []
- id: set_volume_limit_speaker
label: Set Volume Limits Speaker Out
kind: action
command: "08 01 00 B8 {min} {max} {switch_on} {checksum}"
params:
- name: min
type: integer
description: "0-100 (%) minimum"
- name: max
type: integer
description: "0-100 (%) maximum"
- name: switch_on
type: integer
description: "0-100 (%) switch-on volume"
notes: Constraint: min <= switch_on <= max.
- id: get_volume_limit_speaker
label: Get Volume Limits Speaker Out
kind: query
command: "05 01 00 B6 B2"
params: []
- id: set_volume_limit_audio
label: Set Volume Limits Audio Out
kind: action
command: "08 01 00 B9 {min} {max} {switch_on} {checksum}"
params:
- name: min
type: integer
description: "0-100 (%) minimum"
- name: max
type: integer
description: "0-100 (%) maximum"
- name: switch_on
type: integer
description: "0-100 (%) switch-on volume"
- id: get_volume_limit_audio
label: Get Volume Limits Audio Out
kind: query
command: "05 01 00 B7 B3"
params: []
# ---------- Sensors / Environment ----------
- id: get_temperature
label: Get Temperature Sensor
kind: query
command: "05 01 00 2F 2B"
params: []
notes: Report DATA[1]/DATA[2] = sensors 1/2 in °C (±3°C). Dragon 1.0/2.0 only returns DATA[1].
- id: set_light_sensor
label: Set Light Sensor
kind: action
command: "06 01 00 24 {state} {checksum}" # 0x00=Off, 0x01=On
params:
- name: state
type: integer
description: "0x00=Off, 0x01=On"
- id: get_light_sensor
label: Get Light Sensor
kind: query
command: "05 01 00 25 21"
params: []
- id: set_human_sensor
label: Set Human Sensor (CRD41)
kind: action
command: "06 01 00 B4 {timeout} {checksum}" # 0x00=Off, 0x01=10min … 0x06=60min
params:
- name: timeout
type: integer
description: "0=Off, 1-6 = 10-60 minutes"
- id: get_human_sensor
label: Get Human Sensor
kind: query
command: "05 01 00 B3 B7"
params: []
- id: set_fan_speed
label: Set Fan Speed
kind: action
command: "06 01 00 61 {level} {checksum}" # 0x00=Off, 0x01=Auto, 0x02=Low, 0x03=Middle, 0x04=High
params:
- name: level
type: integer
description: "0x00=Off, 0x01=Auto, 0x02=Low, 0x03=Middle, 0x04=High"
notes: Not on Dragon 1.x/1.6.
- id: get_fan_speed
label: Get Fan Speed
kind: query
command: "05 01 00 62 66"
params: []
- id: get_video_signal_present
label: Get Video Signal Present
kind: query
command: "05 01 00 59 5D"
params: []
notes: Report DATA[1]: 0x00=not present, 0x01=present.
- id: get_serial_code
label: Get Serial Code
kind: query
command: "05 01 00 15 11"
params: []
notes: Report DATA[1..14] = 14 ASCII characters.
- id: get_operating_hours
label: Get Operating Hours
kind: query
command: "06 01 00 0F 02 0A"
params: []
notes: Report DATA[1]=MSB, DATA[2]=LSB (16-bit hours).
# ---------- Tiling / Video Wall ----------
- id: set_tiling
label: Set Tiling
kind: action
command: "09 01 00 22 {enable} {frame_comp} {position} {h_v_monitors} {checksum}"
params:
- name: enable
type: integer
description: "0x00=No, 0x01=Yes"
- name: frame_comp
type: integer
description: "0x00=No, 0x01=Yes, 0x02=don't overwrite"
- name: position
type: integer
description: "Tile position (1-25, or 1-150 for Zero Bezel)"
- name: h_v_monitors
type: integer
description: "Encoded H×V monitors per Note 2"
- id: get_tiling
label: Get Tiling
kind: query
command: "05 01 00 23 27"
params: []
- id: set_switch_on_delay
label: Set Switch On Delay (Tiling)
kind: action
command: "06 01 00 54 {delay} {checksum}" # 0x00=Off, 0x01=Auto, 0x02=2s … 0xFF=255s
params:
- name: delay
type: integer
description: "0=Off, 1=Auto, 2-255 = seconds"
- id: get_switch_on_delay
label: Get Switch On Delay (Tiling)
kind: query
command: "05 01 00 55 51"
params: []
- id: set_frame_comp_horz
label: Set Horizontal Frame Compensation
kind: action
command: "06 01 00 5F {value} {checksum}" # 0x00-0xFF
params:
- name: value
type: integer
description: "0-255"
- id: get_frame_comp_horz
label: Get Horizontal Frame Compensation
kind: query
command: "05 01 00 5E 5A"
params: []
- id: set_frame_comp_vert
label: Set Vertical Frame Compensation
kind: action
command: "06 01 00 68 {value} {checksum}" # 0x00-0xFF
params:
- name: value
type: integer
description: "0-255"
- id: get_frame_comp_vert
label: Get Vertical Frame Compensation
kind: query
command: "05 01 00 67 63"
params: []
# ---------- AnyTile (Custom Tiling) ----------
- id: set_custom_tiling
label: Set Custom Tiling (AnyTile)
kind: action
command: "10 01 00 4B {enable} {rot_lsb} {rot_msb} {h_start_lsb} {h_start_msb} {v_start_lsb} {v_start_msb} {h_size_lsb} {h_size_msb} {v_size_lsb} {v_size_msb} {checksum}"
params:
- name: enable
type: integer
description: "0x00=No, 0x01=Yes"
notes: Dragon 1.x/1.6/Himalaya 2.0 only; canvas tiling must be activated in admin menu.
- id: get_custom_tiling
label: Get Custom Tiling (AnyTile)
kind: query
command: "05 01 00 4A 4E"
params: []
- id: set_resolution_mode
label: Set Resolution Input Mode
kind: action
command: "06 01 00 4F {mode} {checksum}" # 0x00=default, 0x01=FHD, 0x02=UHD4K
params:
- name: mode
type: integer
description: "0x00=default, 0x01=FHD, 0x02=UHD4K"
- id: get_resolution_mode
label: Get Resolution Input Mode
kind: query
command: "05 01 00 4E 4A"
params: []
# ---------- Custom Multi-Window ----------
- id: set_custom_multiwin_execute
label: Execute Custom Multi-Window
kind: action
command: "07 01 00 FB {switch} {windows} {checksum}" # switch: 0x00=OFF, 0x01=ON; windows: 0x00-0x03
params:
- name: switch
type: integer
description: "0x00=OFF, 0x01=ON"
- name: windows
type: integer
description: "0x00=1 window, 0x01=2, 0x02=3, 0x03=4"
- id: set_custom_multiwin_window
label: Set Custom Multi-Window Window
kind: action
command: "10 01 00 FC {window} {rotation} {x_h} {x_l} {y_h} {y_l} {w_h} {w_l} {h_h} {h_l} {picture_format} {checksum}"
params:
- name: window
type: integer
description: "0x00=Main, 0x01=Sub1, 0x02=Sub2, 0x03=Sub3"
- name: rotation
type: integer
description: "0x00=NONE, 0x01=90, 0x02=270, 0x03=H_MIRROR, 0x04=V_MIRROR, 0x05=HV_MIRROR"
- name: picture_format
type: integer
description: "0x00=Normal, 0x01=Custom, 0x02=Real, 0x03=Full, 0x04=21:9, 0x05=Dynamic, 0x06=16:9, 0xFF=keep"
- id: get_custom_multiwin_window
label: Get Custom Multi-Window Window
kind: query
command: "06 01 00 FD {window} {checksum}" # window: 0x00=Main … 0x03=Sub3
params:
- name: window
type: integer
description: "0x00=Main, 0x01=Sub1, 0x02=Sub2, 0x03=Sub3"
# ---------- Scheduling ----------
- id: set_scheduling
label: Set Scheduling Page
kind: action
command: "0C 01 00 5A {page} {start_h} {start_m} {end_h} {end_m} {video_source} {working_days} {tag} {checksum}"
params:
- name: page
type: integer
description: "Bits7..4=1-7 page, Bits3..0=0 disable / 1 enable"
- name: start_h
type: integer
description: "0-23, 24=NULL"
- name: start_m
type: integer
description: "0-59, 60=NULL"
- name: end_h
type: integer
description: "0-23, 24=NULL"
- name: end_m
type: integer
description: "0-59, 60=NULL"
- name: video_source
type: integer
description: "Source-type table value (0x00=NULL, 0x0D=HDMI, etc.)"
- name: working_days
type: integer
description: "Bit0=every week, Bit1=Mon … Bit7=Sun"
- name: tag
type: integer
description: "0x01-0x07 = playlist/bookmark/file tag 1-7 (Dragon/Himalaya 2.0)"
- id: get_scheduling
label: Get Scheduling Page
kind: query
command: "06 01 00 5B {page} {checksum}" # page 1-7
params:
- name: page
type: integer
description: "1-7"
# ---------- LED Strip (10BDL3051T) ----------
- id: set_led_strip
label: Set LED Strip Control
kind: action
command: "09 01 00 F3 {on_off} {red} {green} {blue} {checksum}" # on_off: 0x00=off, 0x01=on; RGB 0x00-0xFF
params:
- name: on_off
type: integer
description: "0x00=off, 0x01=on"
- name: red
type: integer
description: "0-255"
- name: green
type: integer
description: "0-255"
- name: blue
type: integer
description: "0-255"
notes: 10BDL3051T only; both LED strips controlled together.
- id: get_led_strip
label: Get LED Strip Status
kind: query
command: "05 01 00 F4 F0"
params: []
# ---------- Color Calibration (Reserved) ----------
- id: set_mic_color_calibration
label: MIC Color Calibration (Reserved)
kind: action
command: "0xFE" # CMD reserved for future use; payload TBD in source
params: []
notes: Source marks as "TBD / Reserved for Future use". No payload documented.
Feedbacks
# The display emits Report packets (DATA[0] mirrors the Get opcode) and the
# ACK/NACK/NAV generic report (0x00). Each Report is the response to the matching
# Get/Query action above.
- id: ack_nack_nav
type: enum
values: [ACK, NACK, NAV]
trigger: response to any Set/Get command
payload: "06 01 00 00 {status} {checksum}"
- id: power_state
type: enum
values: [off, on]
trigger: response to Get Power State (0x19)
payload: "06 01 00 19 {state} {checksum}"
- id: current_source
type: enum
values: [VIDEO, S-VIDEO, COMPONENT, VGA, HDMI, HDMI2, HDMI3, HDMI4, DP, DP2, DVI-D, USB, OPS, BROWSER, SMARTCMS, DMS, INTERNAL_STORAGE, MEDIA_PLAYER, PDF_PLAYER, CUSTOM, VGA2, VGA3, IWB]
trigger: response to Get Current Source (0xAD)
- id: volume_level
type: object
fields: [speaker_out_pct, audio_out_pct]
trigger: response to Get Volume (0x45)
- id: video_signal_present
type: boolean
trigger: response to Get Video Signal Present (0x59)
- id: temperature
type: object
fields: [sensor_1_celsius, sensor_2_celsius]
trigger: response to Get Temperature (0x2F); ±3°C accuracy
Variables
- id: brightness
type: integer
unit: percent
range: [0, 100]
get: get_video_parameters
set: set_video_parameters
- id: contrast
type: integer
unit: percent
range: [0, 100]
get: get_video_parameters
set: set_video_parameters
- id: speaker_volume
type: integer
unit: percent
range: [0, 100]
get: get_volume
set: set_volume
- id: audio_out_volume
type: integer
unit: percent
range: [0, 100]
get: get_volume
set: set_volume
- id: backlight
type: enum
values: [on, off]
get: get_backlight
set: set_backlight
- id: volume_mute
type: boolean
get: get_volume_mute
set: set_volume_mute
- id: off_timer_hours
type: integer
range: [0, 24]
get: get_off_timer
set: set_off_timer
- id: power_state
type: enum
values: [off, on]
get: get_power
set: set_power
Events
# Source documents no unsolicited notifications; the display only replies to host
# commands (ACK/NACK/NAV or Report). No async event stream defined.
# UNRESOLVED: none - source contains no event/notification section.
Macros
# UNRESOLVED: source documents no named multi-step sequences.
Safety
confirmation_required_for:
- set_factory_reset # irreversible; resets all parameters
- set_monitor_restart # reboots display OS
- set_power # powers display off (may require physical wake)
- anytile_set_group_monitor_id # changes addressing; can orphan the unit on the bus
interlocks:
- "No reply is sent when the wrong Monitor ID is used - verify Control byte before sending."
- "Broadcast ID (Control=0x00) produces no ACK/Report; collisions may occur on daisy-chain."
- "Wait for ACK (≤500 ms) before sending the next command; retry on timeout."
- "Cold Start Power State (set_power_cold_start) only applies on next mains-power cycle."
# UNRESOLVED: source contains no explicit safety interlock procedures, voltage/current
# specs, or power-on sequencing warnings beyond the communication rules above.
Notes
- Protocol: SICP V2.03 (Serial/Ethernet Interface Communication Protocol). Family platform is Himalaya 2.0 per the platform table (xxBDL4150D = 49/55/65/75/86/98BDL4150D).
- Transport: identical binary framing on RS-232C (DB9 pins 2 RXD, 3 TXD, 5 GND; null-modem cable) and TCP/IP port 5000. Default serial 9600/8/N/1, no flow control. Supported baud rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600.
- Checksum: XOR of MsgSize, Control, Group, and all Data bytes (excluding the checksum byte itself).
- Group byte: optional. When group ID is "off" in the monitor, the Group byte may be omitted (e.g.
04 01 19 1Cvs05 01 00 19 1D). No ACK is returned if the Group byte is non-zero and doesn't match. - Platform gating: many commands carry platform-specific caveats (Himalaya 1.0/1.2, Dragon 1.x/1.6, Eagle, Phoenix 1/2, QL3, Challenger 2.1, CRD50). Where a note explicitly excludes Himalaya 2.0 it is flagged; otherwise commands are presumed applicable but should be verified against the target device.
- Example checksums in this spec are reproduced verbatim from the source for the documented parameter values; they must be recomputed when any byte changes.
- LED Strip (0xF3/0xF4), External Storage Lock (0xF1/0xF2), and Pixel Shift (0xB1/0xB2) commands are documented for 10BDL3051T / Dragon 1.x platforms and may not apply to xxBDL4150D (Himalaya 2.0) — included for protocol completeness.
Spec output above. 1 AI4AV Markdown revision. Covers all 100+ SICP opcodes (Set + Get/Report) with verbatim hex payloads, full transport config (port 5000, 9600/8/N/1), traits, feedbacks, variables, safety interlocks, platform caveats.
## Provenance
```yaml
source_domains:
- community.xibo.org.uk
- agneovo.com
- digis.ru
- github.com
- keydigital.org
source_urls:
- https://community.xibo.org.uk/uploads/short-url/vwVq2nPyhJKL4kTCYpa6VYhQUa8.pdf
- https://www.agneovo.com/wp-content/uploads/2021/07/PM-32_RS232_CommandList1.pdf
- https://www.digis.ru/upload/iblock/bb4/SICP_application_note_v1.6.pdf
- https://github.com/aolde/philips-signage-display-sicp
- https://www.keydigital.org/web/content/160298/ModuleMa.pdf
retrieved_at: 2026-06-15T22:29:59.426Z
last_checked_at: 2026-06-16T07:14:07.236Z
```
## Verification Summary
```yaml
verdict: verified
checked_at: 2026-06-16T07:14:07.236Z
matched_actions: 119
action_count: 119
confidence: medium
summary: "All 119 spec actions confirmed verbatim by source opcodes and transport parameters fully supported by SICP V2.03 documentation. (7 unresolved item(s) noted in Known Gaps.)"
```
## Known Gaps
```yaml
- "firmware version compatibility ranges not stated in source. Many commands carry platform-specific notes (Himalaya 1.0/1.2, Dragon 1.x, Eagle, Phoenix, QL3, Challenger 2.1); per-model applicability to xxBDL4150D (Himalaya 2.0) not always explicit — see Notes."
- "none - source contains no event/notification section."
- "source documents no named multi-step sequences."
- "source contains no explicit safety interlock procedures, voltage/current"
- "firmware version compatibility not stated in source."
- "exact per-model command applicability for xxBDL4150D variants (49/55/65/75/86/98 inch) not enumerated."
- "any commands introduced after SICP V2.03 (23/Nov/2018) are not covered."
```
---
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0