AI4AVSummary
Panasonic LED LCD professional displays (TH-70LF50J, TH-80LF50J series) controlled via RS-232C serial and LAN. The command set covers power, input selection, audio, picture adjustment, geometry, timers, multi-display tiling, screensaver, and diagnostics. The source documents STX/ETX framing for serial commands; LAN framing is unresolved.
Transport
protocols:
- serial
- lan
serial:
baud_rate: 9600
data_bits: 8
parity: none
stop_bits: 1
flow_control: none
cable_type: straight
addressing:
port: null # UNRESOLVED: default LAN port not stated in source; SSU:LCP sets the port number (1024-65535 excluding 4352 and 10000)
auth:
type: UNRESOLVED
Traits
traits:
- powerable # PON/POF commands
- routable # IMS input switching
- queryable # Q-prefixed inquiry commands
- levelable # AVL volume, VPC backlight/picture/brightness, DGE position/size
Actions
actions:
- id: power_on
label: Power On
kind: action
command: PON
params: []
- id: power_off
label: Power Off
kind: action
command: POF
params: []
- id: input_select
label: Input Select
kind: action
command: "IMS:***(***)"
params:
- name: input
type: enum
values:
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
- AV2YBR
- AV2RGB
- DV1YUV
- DVIRGB
- SL1YUV
- SL1RGB
- S1AYUV
- S1ARGB
- S1BYUV
- S1BRGB
description: "Input source. S1A/S1B only with dual input terminal board."
- id: volume_set
label: Set Volume
kind: action
command: "AVL:***"
params:
- name: level
type: integer
min: 0
max: 100
description: "Volume level 000-100"
- id: volume_up
label: Volume Up
kind: action
command: AUU
params: []
- id: volume_down
label: Volume Down
kind: action
command: AUD
params: []
- id: audio_mute
label: Audio Mute
kind: action
command: "AMT:*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "0=off, 1=on"
- id: video_mute
label: Video Mute
kind: action
command: "VMT:*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "0=off, 1=on"
- id: aspect_set
label: Set Aspect Ratio
kind: action
command: "DAM:****"
params:
- name: mode
type: enum
values:
- FULL
- NORM
- ZOOM
- ZOM2
description: "full / normal / zoom1 / zoom2"
- id: picture_mode_set
label: Set Picture Mode
kind: action
command: "VPC:MEN***"
params:
- name: mode
type: enum
values:
- STD
- DYN
- CNM
description: "standard / dynamic / cinema"
- id: backlight_set
label: Set Backlight
kind: action
command: "VPC:BLT***"
params:
- name: level
type: integer
min: 0
max: 100
- id: contrast_set
label: Set Contrast (Picture)
kind: action
command: "VPC:PIC***"
params:
- name: level
type: integer
min: 0
max: 100
- id: brightness_set
label: Set Black Level (Brightness)
kind: action
command: "VPC:BLK***"
params:
- name: level
type: integer
min: 0
max: 100
- id: color_set
label: Set Color
kind: action
command: "VPC:COL***"
params:
- name: level
type: integer
min: 0
max: 100
description: "AV1 only"
- id: tint_set
label: Set Tint
kind: action
command: "VPC:TIN***"
params:
- name: level
type: integer
min: 0
max: 100
description: "AV1 only"
- id: sharpness_set
label: Set Sharpness
kind: action
command: "VPC:SHP***"
params:
- name: level
type: integer
min: 0
max: 100
- id: color_temperature_set
label: Set Color Temperature
kind: action
command: "VPC:TMP***"
params:
- name: mode
type: enum
values:
- WRM
- MID
- COL
description: "Low / Mid / High"
- id: input_level_set
label: Set Input Level
kind: action
command: "VWB:ILV***"
params:
- name: level
type: integer
min: -16
max: 16
- id: gamma_set
label: Set Gamma
kind: action
command: "VWB:GMM**"
params:
- name: mode
type: enum
values:
- "20"
- "22"
- "26"
- SC
description: "2.0 / 2.2 / 2.6 / S Curve"
- id: agc_set
label: Set Auto Gain Control
kind: action
command: "VWB:AGC*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: red_drive_set
label: Set Red Drive
kind: action
command: "VWB:RDR***"
params:
- name: level
type: integer
min: 0
max: 100
- id: green_drive_set
label: Set Green Drive
kind: action
command: "VWB:GDR***"
params:
- name: level
type: integer
min: 0
max: 100
- id: blue_drive_set
label: Set Blue Drive
kind: action
command: "VWB:BDR***"
params:
- name: level
type: integer
min: 0
max: 100
- id: red_cutoff_set
label: Set Red Cutoff
kind: action
command: "VWB:RCT***"
params:
- name: level
type: integer
min: 0
max: 100
- id: green_cutoff_set
label: Set Green Cutoff
kind: action
command: "VWB:GCT***"
params:
- name: level
type: integer
min: 0
max: 100
- id: blue_cutoff_set
label: Set Blue Cutoff
kind: action
command: "VWB:BCT***"
params:
- name: level
type: integer
min: 0
max: 100
- id: sound_mode_set
label: Set Sound Mode
kind: action
command: "AAC:MEN***"
params:
- name: mode
type: enum
values:
- STD
- DYN
- CLR
description: "Standard / Dynamic / Clear"
- id: bass_set
label: Set Bass
kind: action
command: "AAC:BAS***"
params:
- name: level
type: integer
min: -15
max: 15
- id: treble_set
label: Set Treble
kind: action
command: "AAC:TRE***"
params:
- name: level
type: integer
min: -15
max: 15
- id: balance_set
label: Set Balance
kind: action
command: "AAC:BAL***"
params:
- name: level
type: integer
min: -15
max: 15
- id: surround_set
label: Set Surround
kind: action
command: "AAC:SUR***"
params:
- name: state
type: enum
values:
- MON
- "OFF"
description: "ON / OFF"
- id: horizontal_position_set
label: Set Horizontal Position
kind: action
command: "DGE:HPO****"
params:
- name: position
type: integer
min: -124
max: 124
- id: horizontal_size_set
label: Set Horizontal Size
kind: action
command: "DGE:HSZ****"
params:
- name: size
type: integer
min: -124
max: 124
- id: vertical_position_set
label: Set Vertical Position
kind: action
command: "DGE:VPO****"
params:
- name: position
type: integer
min: -124
max: 124
- id: vertical_size_set
label: Set Vertical Size
kind: action
command: "DGE:VSZ****"
params:
- name: size
type: integer
min: -124
max: 124
- id: clock_phase_set
label: Set Clock Phase
kind: action
command: "DGE:CLK***"
params:
- name: phase
type: integer
min: 0
max: 63
- id: dot_clock_set
label: Set Dot Clock
kind: action
command: "DGE:DCL***"
params:
- name: clock
type: integer
min: 0
max: 63
- id: pixel_1to1_set
label: Set 1:1 Pixel Mode
kind: action
command: "DGE:DBD*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: overscan_set
label: Set Overscan
kind: action
command: "DGE:OVS*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: auto_setup
label: Auto Setup (Position)
kind: action
command: "DGE:ASU*"
params:
- name: execute
type: enum
values:
- "1"
description: "Execute auto setup"
- id: wobbling_set
label: Set Wobbling
kind: action
command: "OSP:WOB*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: component_rgb_select
label: Component/RGB-IN Select
kind: action
command: "SSU:CMP***"
params:
- name: mode
type: enum
values:
- YBR
- RGB
description: "for AV2"
- id: dvi_yuv_rgb_select
label: DVI YUV/RGB-IN Select
kind: action
command: "SSU:DYR***"
params:
- name: mode
type: enum
values:
- YUV
- RGB
- id: no_activity_power_off_set
label: Set No Activity Power Off
kind: action
command: "SSU:NAO*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: osd_language_set
label: Set OSD Language
kind: action
command: "SSU:LNG***"
params:
- name: language
type: enum
values:
- ENG
- DEU
- FRA
- ITA
- ESP
- USA
- CHA
- JPN
- RUS
- id: eco_mode_set
label: Set ECO Mode
kind: action
command: "SSU:ECS*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "Custom / ON"
- id: no_signal_power_off_set
label: Set No Signal Power Off
kind: action
command: "SSU:AOF*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: pc_power_management_set
label: Set PC Power Management
kind: action
command: "SSU:DPM*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: dvi_power_management_set
label: Set DVI-D Power Management
kind: action
command: "SSU:DPD*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: power_save_set
label: Set Power Save
kind: action
command: "SSU:ECO*"
params:
- name: mode
type: enum
values:
- "0"
- "1"
- "2"
description: "OFF / ON / Sensor"
- id: menu_duration_set
label: Set Menu Display Duration
kind: action
command: "SSU:MDT***"
params:
- name: seconds
type: integer
min: 5
max: 120
description: "5 to 120 seconds, step 5"
- id: menu_transparency_set
label: Set Menu Transparency
kind: action
command: "SSU:MTL***"
params:
- name: percent
type: integer
min: 0
max: 100
description: "0-100%, step 10"
- id: network_setup
label: Set Network Configuration
kind: action
command: "SSU:NET***"
params:
- name: ip_octet_1
type: integer
min: 0
max: 255
description: "IP address first byte"
- name: ip_octet_2
type: integer
min: 0
max: 255
description: "IP address second byte"
- name: ip_octet_3
type: integer
min: 0
max: 255
description: "IP address third byte"
- name: ip_octet_4
type: integer
min: 0
max: 255
description: "IP address fourth byte"
- name: subnet_octet_1
type: integer
min: 0
max: 255
description: "Subnet mask first byte"
- name: subnet_octet_2
type: integer
min: 0
max: 255
description: "Subnet mask second byte"
- name: subnet_octet_3
type: integer
min: 0
max: 255
description: "Subnet mask third byte"
- name: subnet_octet_4
type: integer
min: 0
max: 255
description: "Subnet mask fourth byte"
- name: gateway_octet_1
type: integer
min: 0
max: 255
description: "Gateway address first byte"
- name: gateway_octet_2
type: integer
min: 0
max: 255
description: "Gateway address second byte"
- name: gateway_octet_3
type: integer
min: 0
max: 255
description: "Gateway address third byte"
- name: gateway_octet_4
type: integer
min: 0
max: 255
description: "Gateway address fourth byte"
- name: dhcp
type: enum
values:
- "0"
- "1"
description: "DHCP OFF / ON"
- id: lan_port_set
label: Set LAN Port Number
kind: action
command: "SSU:LCP*****"
params:
- name: port
type: integer
min: 1024
max: 65535
description: "Excludes 4352 and 10000"
- id: lan_speed_set
label: Set LAN Speed
kind: action
command: "SSU:LSP****"
params:
- name: speed
type: enum
values:
- AUTO
- 010H
- 010F
- 100H
- 100F
description: "Auto / 10Base Half / 10Base Full / 100Base Half / 100Base Full"
- id: network_id_set
label: Set Network ID
kind: action
command: "SSU:LID**"
params:
- name: id
type: integer
min: 0
max: 99
- id: sync_signal_set
label: Set Sync Signal
kind: action
command: "SSG:SNC***"
params:
- name: mode
type: enum
values:
- HAV
- GRN
description: "Auto / Sync On Green (PC input)"
- id: color_system_set
label: Set Color System
kind: action
command: "SSG:COS***"
params:
- name: system
type: enum
values:
- NTS
- PAL
- SCM
- 4NT
- MPA
- NPA
- AUT
description: "NTSC / PAL / SECAM / NTSC4.43 / PAL-M / PAL-N / Auto (AV1)"
- id: cinema_reality_set
label: Set Cinema Reality
kind: action
command: "SSG:DCR*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: xga_mode_set
label: Set XGA Mode
kind: action
command: "SSG:XGA*"
params:
- name: mode
type: enum
values:
- "1"
- "3"
description: "1024x768 / 1366x768"
- id: noise_reduction_set
label: Set Noise Reduction
kind: action
command: "SSG:NRS***"
params:
- name: level
type: enum
values:
- "OFF"
- AUT
- LOW
- MID
- HIG
- id: hdmi_range_set
label: Set HDMI Range
kind: action
command: "SSG:HRC***"
params:
- name: range
type: enum
values:
- VID
- FUL
- AUT
description: "Video / Full / Auto"
- id: screensaver_on_off
label: Screensaver ON/OFF
kind: action
command: "OSP:SCR*"
params:
- name: state
type: enum
values:
- "0"
- "5"
description: "ON / OFF"
- id: screensaver_mode_set
label: Set Screensaver Mode
kind: action
command: "SSC:MOD*"
params:
- name: mode
type: enum
values:
- "0"
- "1"
- "2"
- "3"
- "4"
description: "OFF / Interval / Time Designation / ON / Auto power off"
- id: screensaver_interval_set
label: Set Screensaver Interval
kind: action
command: "SSC:INT**** ****"
params:
- name: interval
type: string
description: "HH:MM (0000-2359)"
- name: duration
type: string
description: "HH:MM (0000-2359)"
- id: screensaver_time_set
label: Set Screensaver Time Designation
kind: action
command: "SSC:TIM**** ****"
params:
- name: start
type: string
description: "HH:MM (0000-2359)"
- name: end
type: string
description: "HH:MM (0000-2359)"
- id: screensaver_standby_set
label: Set Standby After Screensaver
kind: action
command: "SSC:AOF****"
params:
- name: duration
type: string
description: "HH:MM (0000-2359)"
- id: input_label_set
label: Set Input Label
kind: action
command: "SSU:ILA***"
params:
- name: label
type: enum
values:
- INP
- PCN
- DV1
- DV2
- DV3
- BD1
- BD2
- BD3
- CTV
- VCR
- STB
- SKP
description: "reset/PC/DVD/Blu-ray/CATV/VCR/STB/skip"
- id: multi_display_on_off
label: Multi Display ON/OFF
kind: action
command: "MDC:*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: multi_display_setup
label: Multi Display Setup
kind: action
command: "MDC:* * **"
params:
- name: picture
type: enum
values:
- "0"
- "1"
description: "Multi Picture OFF / ON"
- name: enlarge
type: integer
min: 0
max: 5
description: "0=2x2, 1=3x3, 2=4x4, 3=2x2 frameless, 4=3x3 frameless, 5=4x4 frameless"
- name: location
type: integer
min: 1
max: 16
description: "Location A1-D4"
- id: multi_display_setup_ext
label: Multi Display Setup (Extended)
kind: action
command: "MDC:EXT* * * * **"
params:
- name: picture
type: enum
values:
- "0"
- "1"
- name: horizontal
type: integer
min: 1
max: 5
- name: vertical
type: integer
min: 1
max: 5
- name: frame
type: enum
values:
- "0"
- "1"
- name: location
type: integer
min: 1
max: 25
description: "A1-E5"
- id: timer_program_set
label: Set Timer Program
kind: action
command: "TIM:PRG** * *** *** **** ***"
params:
- name: program_number
type: integer
min: 1
max: 20
- name: enabled
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- name: weekday
type: enum
values:
- MON
- TUE
- WED
- THU
- FRI
- SAT
- SUN
- EVD
description: "Day or Every Day"
- name: action
type: enum
values:
- PON
- POF
- name: time
type: string
description: "HH:MM (0000-2359)"
- name: input
type: enum
values:
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
- id: present_day_set
label: Set Present Day
kind: action
command: "TIM:DAY***"
params:
- name: day
type: enum
values:
- MON
- TUE
- WED
- THU
- FRI
- SAT
- SUN
- id: present_time_set
label: Set Present Time
kind: action
command: "TIM:NOW0****"
params:
- name: time
type: string
description: "HH:MM (0000-2359)"
- id: input_search_set
label: Set Input Search
kind: action
command: "ISH:FNC***"
params:
- name: mode
type: enum
values:
- "OFF"
- ALL
- PRI
description: "OFF / All input / Priority search"
- id: primary_input_set
label: Set Primary Input
kind: action
command: "ISH:PRI***"
params:
- name: input
type: enum
values:
- NON
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
- id: secondary_input_set
label: Set Secondary Input
kind: action
command: "ISH:SCI***"
params:
- name: input
type: enum
values:
- NON
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
- id: osd_on_off
label: OSD ON/OFF
kind: action
command: "OSP:OSD*"
params:
- name: state
type: enum
values:
- "0"
- "1"
- id: initial_input_set
label: Set Initial Input
kind: action
command: "OSP:IIN***"
params:
- name: input
type: enum
values:
- "OFF"
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
- id: initial_vol_level_set
label: Set Initial Volume Level
kind: action
command: "ISH:FNC****"
params:
- name: enabled
type: enum
values:
- "0"
- "1"
- name: level
type: integer
min: 0
max: 100
- id: max_vol_level_set
label: Set Maximum Volume Level
kind: action
command: "OSP:MVL****"
params:
- name: enabled
type: enum
values:
- "0"
- "1"
- name: level
type: integer
min: 0
max: 100
- id: input_lock_set
label: Set Input Lock
kind: action
command: "OSP:INL***"
params:
- name: input
type: enum
values:
- "OFF"
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
- id: button_lock_set
label: Set Button Lock
kind: action
command: "OSP:BTL***"
params:
- name: mode
type: enum
values:
- "OFF"
- MEN
- ALL
description: "OFF / MENU&ENTER / ON"
- id: remocon_user_level_set
label: Set Remote User Level
kind: action
command: "OSP:RCM*"
params:
- name: level
type: enum
values:
- "0"
- "1"
- "2"
- "3"
description: "OFF / User1 / User2 / User3"
- id: off_timer_set
label: Set Off Timer
kind: action
command: "OSP:OFT*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- id: function_key_set
label: Set Function Key
kind: action
command: "OSP:KFN* ***"
params:
- name: key_number
type: enum
values:
- "1"
- "2"
- name: function
type: enum
values:
- SIG
- SSV
- ECO
- SUT
description: "Signal / Screensaver / ECO / Timer"
- id: initial_power_mode_set
label: Set Initial Power Mode
kind: action
command: "OSP:IPM***"
params:
- name: mode
type: enum
values:
- NOR
- PON
- STB
description: "Normal / Power on / Standby"
- id: power_on_screen_delay_set
label: Set Power ON Screen Delay
kind: action
command: "OSP:POD**"
params:
- name: seconds
type: integer
min: 0
max: 30
- id: clock_display_set
label: Set Clock Display
kind: action
command: "OSP:CLK"
params:
- name: state
type: enum
values:
- "0"
- "1"
- id: power_on_message_set
label: Set Power On Message (No Activity)
kind: action
command: "OSP:NAP"
params:
- name: state
type: enum
values:
- "0"
- "1"
- id: studio_white_balance_set
label: Set Studio White Balance
kind: action
command: "OSP:SWB*"
params:
- name: state
type: enum
values:
- "0"
- "1"
- id: slot_power_set
label: Set Slot Power
kind: action
command: "OSP:SLP*"
params:
- name: mode
type: enum
values:
- OF
- AT
- "ON"
description: "OFF / AUTO / ON"
- id: sdi_audio_output_set
label: Set SDI Audio Output
kind: action
command: "ASD:OUT*"
params:
- name: state
type: enum
values:
- "0"
- "1"
- id: sdi_left_channel_set
label: Set SDI Left Channel
kind: action
command: "ASD:LCH**"
params:
- name: channel
type: integer
min: 1
max: 16
- id: sdi_right_channel_set
label: Set SDI Right Channel
kind: action
command: "ASD:RCH**"
params:
- name: channel
type: integer
min: 1
max: 16
- id: sdi_level_meter_set
label: Set SDI Level Meter Display
kind: action
command: "ASD:LMT*"
params:
- name: mode
type: enum
values:
- "0"
- "1"
- "2"
description: "Off / 1-8CH / 9-16CH"
- id: recall_display
label: Recall Display
kind: action
command: DDS
params: []
- id: audio_mute_recall
label: Audio Mute (Recall)
kind: action
command: AOC
params: []
- id: osd_clear
label: OSD Clear
kind: action
command: VDO
params: []
- id: digital_zoom_set
label: Set Digital Zoom
kind: action
command: "DZM:* * * *"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON"
- name: enlarge
type: integer
min: 1
max: 4
- name: horizontal_pos
type: integer
min: 1
max: 5
- name: vertical_pos
type: integer
min: 1
max: 5
- id: off_timer_minutes_set
label: Set Off Timer (Minutes)
kind: action
command: "ZOT:**"
params:
- name: minutes
type: integer
min: 0
max: 90
description: "0 to 90 minutes"
- id: 3d_yc_filter_set
label: Set 3D Y/C Filter
kind: action
command: "SSG:YCS*"
params:
- name: state
type: enum
values:
- "0"
- "1"
description: "OFF / ON (AV1 only)"
- id: position_size_lump_set
label: Set Position And Size
kind: action
command: "DGE:PSZ****<br>****<br>****<br>****"
params:
- name: horizontal_position
type: integer
min: -124
max: 124
description: "-124 to 0000 to +124(0124)"
- name: horizontal_size
type: integer
min: -124
max: 124
description: "-124 to 0000 to +124(0124)"
- name: vertical_position
type: integer
min: -124
max: 124
description: "-124 to 0000 to +124(0124)"
- name: vertical_size
type: integer
min: -124
max: 124
description: "-124 to 0000 to +124(0124)"
description: "Source template retained verbatim; <br> is source table markup. UNRESOLVED: wire separators between the four fields."
- id: input_label_by_input_set
label: Set Label For Specified Input
kind: action
command: "SSU:ILAAV1***"
params:
- name: input
type: enum
values:
- AV1
- AV2
- PC1
- DV1
- HM1
- HM2
- SL1
- S1A
- S1B
description: "Select the literal command template: AV1=SSU:ILAAV1***; AV2=SSU:ILAAV2***; PC1=SSU:ILAPC1***; DV1=SSU:ILADV1***; HM1=SSU:ILAHM1***; HM2=SSU:ILAHM2***; SL1=SSU:ILASL1***; S1A=SSU:ILAS1A***; S1B=SSU:ILAS1B***. The command field shows the AV1 variant."
- name: label
type: enum
values:
- INP
- PCN
- DV1
- DV2
- DV3
- BD1
- BD2
- BD3
- CTV
- VCR
- STB
- SKP
description: "PC1: PCN / DV1 / DV2 / DV3 / BD1 / BD2 / BD3 / CTV / VCR / STB / SKP. Other listed inputs: INP / DV1 / DV2 / DV3 / BD1 / BD2 / BD3 / CTV / VCR / STB / SKP."
Feedbacks
feedbacks:
- id: power_status
label: Power Status
command: QPW
query_command: QPW
response: "QPW:*"
type: enum
values:
- "0"
- "1"
description: "0=Standby, 1=Power on"
- id: input_query
label: Current Input
command: QMI
query_command: QMI
response: "QMI:***"
type: enum
values:
- AV1
- AV2YBR
- AV2RGB
- PC1
- DV1YUV
- DV1RGB
- HM1
- SL1
- SL1YUV
- SL1RGB
- S1A
- S1B
- S1AYUV
- S1ARGB
- S1BYUV
- S1BRGB
- id: volume_query
label: Current Volume
command: QAV
query_command: QAV
response: "QAV:***"
type: integer
min: 0
max: 100
- id: audio_mute_query
label: Audio Mute State
command: QAM
query_command: QAM
response: "QAM:*"
type: enum
values:
- "0"
- "1"
- id: video_mute_query
label: Video Mute State
command: QVM
query_command: QVM
response: "QVM:*"
type: enum
values:
- "0"
- "1"
- id: aspect_query
label: Current Aspect Ratio
command: QAS
query_command: QAS
response: "QAS:****"
type: enum
values:
- FULL
- NORM
- ZOOM
- ZOM2
- id: picture_mode_query
label: Picture Mode
command: "QPC:MEN"
query_command: "QPC:MEN"
response: "QPC:MEN***"
type: enum
values:
- STD
- DYN
- CNM
- id: backlight_query
label: Backlight Level
command: "QPC:BLT"
query_command: "QPC:BLT"
response: "QPC:BLT***"
type: integer
min: 0
max: 100
- id: contrast_query
label: Contrast Level
command: "QPC:PIC"
query_command: "QPC:PIC"
response: "QPC:PIC***"
type: integer
min: 0
max: 100
- id: brightness_query
label: Black Level (Brightness)
command: "QPC:BLK"
query_command: "QPC:BLK"
response: "QPC:BLK***"
type: integer
min: 0
max: 100
- id: color_query
label: Color Level
command: "QPC:COL"
query_command: "QPC:COL"
response: "QPC:COL***"
type: integer
min: 0
max: 100
- id: tint_query
label: Tint Level
command: "QPC:TIN"
query_command: "QPC:TIN"
response: "QPC:TIN***"
type: integer
min: 0
max: 100
- id: sharpness_query
label: Sharpness Level
command: "QPC:SHP"
query_command: "QPC:SHP"
response: "QPC:SHP***"
type: integer
min: 0
max: 100
- id: color_temperature_query
label: Color Temperature
command: "QPC:TMP"
query_command: "QPC:TMP"
response: "QPC:TMP***"
type: enum
values:
- WRM
- MID
- COL
- id: signal_frequency_query
label: Signal Frequency
command: QFR
query_command: QFR
response: "QFR:***.* ***.*"
type: string
description: "Horizontal freq, Vertical freq (kHz/Hz)"
- id: signal_format_query
label: Signal Format
command: QSF
query_command: QSF
response: "QSF:***************** ***"
type: string
description: "Current video format info (max 20 chars)"
- id: model_name_query
label: Model Name
command: QMN
query_command: QMN
response: "QMN:*****"
type: string
values:
- 80F10
- 47F10
description: "Returns LF50 or LFP35"
- id: serial_number_query
label: Serial Number
command: QSN
query_command: QSN
response: "QSN:*****"
type: string
description: "ASCII 9-15 characters, alphanumeric, space, dash"
- id: sos_history_query
label: SOS History
command: QSS
query_command: QSS
response: "QSS:**.**.**.**.**.**"
type: string
description: "Error history: count + last 5 SOS codes (00-FF each)"
- id: sos_status_query
label: SOS Status
command: "QSS:STS"
query_command: "QSS:STS"
response: "QSS:STS***"
type: enum
values:
- NON
- ERR
- EXT
description: "No SOS / Current SOS / SOS history exists"
- id: auto_setup_query
label: Auto Setup Status
command: "QGE:ASU"
query_command: "QGE:ASU"
response: "QGE:ASU**"
type: enum
values:
- OK
- NG
- OF
- NW
description: "Normal End / Abnormal End / Invalid or unfinished / Running"
- id: digital_zoom_query
label: Digital Zoom Status
command: QDZ
query_command: QDZ
response: "QDZ:* * * *"
type: string
description: "OFF/ON, enlarge 1-4, H-pos 1-5, V-pos 1-5"
- id: input_level_query
label: Input Level
command: "QWB:ILV"
query_command: "QWB:ILV"
response: "QWB:ILV***"
type: integer
min: -16
max: 16
description: "-16 to 000 to +16(016)"
- id: gamma_query
label: Gamma
command: "QWB:GMM"
query_command: "QWB:GMM"
response: "QWB:GMM**"
type: enum
values:
- "20"
- "22"
- "26"
- SC
description: "20 / 22/ 26 / SC; 2.0 / 2.2 / 2.6 / S Curve"
- id: agc_query
label: Auto Gain Control
command: "QWB:AGC"
query_command: "QWB:AGC"
response: "QWB:AGC*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: red_drive_query
label: Red Drive
command: "QWB:RDR"
query_command: "QWB:RDR"
response: "QWB:RDR***"
type: integer
min: 0
max: 100
description: "000 to 100"
- id: green_drive_query
label: Green Drive
command: "QWB:GDR"
query_command: "QWB:GDR"
response: "QWB:GDR***"
type: integer
min: 0
max: 100
description: "000 to 100"
- id: blue_drive_query
label: Blue Drive
command: "QWB:BDR"
query_command: "QWB:BDR"
response: "QWB:BDR***"
type: integer
min: 0
max: 100
description: "000 to 100"
- id: red_cutoff_query
label: Red Cutoff
command: "QWB:RCT"
query_command: "QWB:RCT"
response: "QWB:RCT***"
type: integer
min: 0
max: 100
description: "000 to 100"
- id: green_cutoff_query
label: Green Cutoff
command: "QWB:GCT"
query_command: "QWB:GCT"
response: "QWB:GCT***"
type: integer
min: 0
max: 100
description: "000 to 100"
- id: blue_cutoff_query
label: Blue Cutoff
command: "QWB:BCT"
query_command: "QWB:BCT"
response: "QWB:BCT***"
type: integer
min: 0
max: 100
description: "000 to 100"
- id: sound_mode_query
label: Sound Mode
command: "QAC:MEN"
query_command: "QAC:MEN"
response: "QAC:MEN:***"
type: enum
values:
- "STD(AUT)"
- DYN
- CLR
description: "STD(AUT) / DYN / CLR. UNRESOLVED: whether STD(AUT) denotes alternative response tokens."
- id: bass_query
label: Bass
command: "QAC:BAS"
query_command: "QAC:BAS"
response: "QAC:BAS:***"
type: integer
min: -15
max: 15
description: "-15 to 000 to +15(015)"
- id: treble_query
label: Treble
command: "QAC:TRE"
query_command: "QAC:TRE"
response: "QAC:TRE:***"
type: integer
min: -15
max: 15
description: "-15 to 000 to +15(015)"
- id: balance_query
label: Balance
command: "QAC:BAL"
query_command: "QAC:BAL"
response: "QAC:BAL:***"
type: integer
min: -15
max: 15
description: "-15 to 000 to +15(015)"
- id: surround_query
label: Surround
command: "QAC:SUR"
query_command: "QAC:SUR"
response: "QAC:SUR:***"
type: enum
values:
- MON
- "OFF"
description: "MON / OFF; ON / OFF"
- id: horizontal_position_query
label: Horizontal Position
command: "QGE:HPO"
query_command: "QGE:HPO"
response: "QGE:HPO****"
type: integer
min: -124
max: 124
description: "-124 to 0000 to +124(0124)"
- id: horizontal_size_query
label: Horizontal Size
command: "QGE:HSZ"
query_command: "QGE:HSZ"
response: "QGE:HSZ****"
type: integer
min: -124
max: 124
description: "-124 to 0000 to +124(0124)"
- id: vertical_position_query
label: Vertical Position
command: "QGE:VPO"
query_command: "QGE:VPO"
response: "QGE:VPO****"
type: integer
min: -124
max: 124
description: "-124 to 0000 to +124(0124)"
- id: vertical_size_query
label: Vertical Size
command: "QGE:VSZ"
query_command: "QGE:VSZ"
response: "QGE:VSZ****"
type: integer
min: -124
max: 124
description: "-124 to 0000 to +124(0124)"
- id: clock_phase_query
label: Clock Phase
command: "QGE:CLK"
query_command: "QGE:CLK"
response: "QGE:CLK***"
type: integer
min: 0
max: 63
description: "00 to 63"
- id: dot_clock_query
label: Dot Clock
command: "QGE:DCL"
query_command: "QGE:DCL"
response: "QGE:DCL***"
type: integer
min: 0
max: 63
description: "00 to 63"
- id: pixel_1to1_query
label: 1:1 Pixel Mode
command: "QGE:DBD"
query_command: "QGE:DBD"
response: "QGE:DBD*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: overscan_query
label: Overscan
command: "QGE:OVS"
query_command: "QGE:OVS"
response: "QGE:OVS*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: position_size_lump_query
label: Position And Size
command: "QGE:PSZ"
query_command: "QGE:PSZ"
response: "QGE:PSZ****<br>****<br>****<br>****"
type: string
description: "Four fields, each -124 to 0000 to +124(0124). Source response template retained verbatim; <br> is source table markup. UNRESOLVED: wire separators."
- id: wobbling_query
label: Wobbling
command: "QSP:WOB"
query_command: "QSP:WOB"
response: "QSP:WOB*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: component_rgb_query
label: Component/RGB-IN Selection
command: "QSU:CMP"
query_command: "QSU:CMP"
response: "QSU:CMP***"
type: enum
values:
- YBR
- RGB
description: "YBR/RGB; for AV2"
- id: dvi_yuv_rgb_query
label: DVI YUV/RGB-IN Selection
command: "QSU:DYR"
query_command: "QSU:DYR"
response: "QSU:DYR***"
type: enum
values:
- YUV
- RGB
description: "YUV/RGB; YUV signal/RGB signal"
- id: no_activity_power_off_query
label: No Activity Power Off
command: "QSU:NAO"
query_command: "QSU:NAO"
response: "QSU:NAO*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: osd_language_query
label: OSD Language
command: "QSU:LNG"
query_command: "QSU:LNG"
response: "QSU:LNG***"
type: enum
values:
- ENG
- DEU
- FRA
- ITA
- ESP
- USA
- CHA
- JPN
- RUS
description: "ENG / DEU / FRA / ITA / ESP / USA / CHA / JPN / RUS"
- id: eco_mode_query
label: ECO Mode
command: "QSU:ECS"
query_command: "QSU:ECS"
response: "QSU:ECS*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; Custom / ON"
- id: no_signal_power_off_query
label: No Signal Power Off
command: "QSU:AOF"
query_command: "QSU:AOF"
response: "QSU:AOF*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: pc_power_management_query
label: PC Power Management
command: "QSU:DPM"
query_command: "QSU:DPM"
response: "QSU:DPM*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: dvi_power_management_query
label: DVI-D Power Management
command: "QSU:DPD"
query_command: "QSU:DPD"
response: "QSU:DPD*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: power_save_query
label: Power Save
command: "QSU:ECO"
query_command: "QSU:ECO"
response: "QSU:ECO*"
type: enum
values:
- "0"
- "1"
- "2"
description: "0 / 1 / 2; OFF / ON / Sensor"
- id: menu_duration_query
label: Menu Display Duration
command: "QSU:MDT"
query_command: "QSU:MDT"
response: "QSU:MDT***"
type: integer
min: 5
max: 120
description: "005 to 120; 5 to 120 sec (step every 5sec)"
- id: menu_transparency_query
label: Menu Transparency
command: "QSU:MTL"
query_command: "QSU:MTL"
response: "QSU:MTL***"
type: integer
min: 0
max: 100
description: "000 to 100; 0 to 100% (Step every 10%)"
- id: network_setup_query
label: Network Configuration
command: "QSU:NET"
query_command: "QSU:NET"
response: "QSU:NET***<br>***<br>***<br>***<br>***<br>***<br>***<br>***<br>***<br>***<br>***<br>***<br>*"
type: string
description: "Twelve fields, each 000 to 255: four IP address bytes, four SUB NET MASK bytes, four Gateway address bytes; final field 0/1, DHCP OFF/DHCP ON. Source response template retained verbatim; <br> is source table markup. UNRESOLVED: wire separators."
- id: lan_port_query
label: LAN Port Number
command: "QSU:LC"
query_command: "QSU:LC"
response: "QSU:LCP*****"
type: integer
min: 1024
max: 65535
description: "01024 to 65535(04352，10000を除く); Port No(1024 to 4351，4353 to 9999，10001 to 65535). Inquiry token QSU:LC retained exactly as documented."
- id: lan_speed_query
label: LAN Speed
command: "QSU:LSP"
query_command: "QSU:LSP"
response: "QSU:LSP****"
type: enum
values:
- AUTO
- 010H
- 010F
- 100H
- 100F
description: "AUTO/010H/010F/100H/100F"
- id: network_id_query
label: Network ID
command: "QSU:LID"
query_command: "QSU:LID"
response: "QSU:LID**"
type: integer
min: 0
max: 99
description: "00 to 99"
- id: 3d_yc_filter_query
label: 3D Y/C Filter
command: "QSG:YCS<br>*"
query_command: "QSG:YCS<br>*"
response: "QSG:YCS<br>*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; for AV1; OFF / ON. Inquiry template retained verbatim, including its documented wildcard; <br> is source table markup. UNRESOLVED: inquiry wildcard semantics."
- id: sync_signal_query
label: Sync Signal Setting
command: "QSG:SNC"
query_command: "QSG:SNC"
response: "QSG:SNC<br>***"
type: enum
values:
- HAV
- GRN
description: "HAV / GRN; for PC; Auto / Sync On Green. <br> is source table markup."
- id: color_system_query
label: Color System
command: "QSG:COS"
query_command: "QSG:COS"
response: "QSG:COS***"
type: enum
values:
- NTS
- PAL
- SCM
- 4NT
- MPA
- NPA
- AUT
description: "NTS / PAL / SCM / 4NT / MPA / NPA / AUT; for AV1"
- id: cinema_reality_query
label: Cinema Reality
command: "QSG:DCR"
query_command: "QSG:DCR"
response: "QSG:DCR*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: xga_mode_query
label: XGA Mode
command: "QSG:XGA"
query_command: "QSG:XGA"
response: "QSG:XGA*"
type: enum
values:
- "1"
- "3"
description: "1 / 3; 1024x768 / 1366x768"
- id: noise_reduction_query
label: Noise Reduction
command: "QSG:NRS"
query_command: "QSG:NRS"
response: "QSG:NRS***"
type: enum
values:
- "OFF"
- AUT
- LOW
- MID
- HIG
description: "OFF / AUT / LOW / MID / HIG"
- id: hdmi_range_query
label: HDMI Range
command: "QSG:HRC"
query_command: "QSG:HRC"
response: "QSG:HRC***"
type: enum
values:
- VID
- FUL
- AUT
description: "VID / FUL / AUT; Video / FULL / auto"
- id: screensaver_on_off_query
label: Screensaver State
command: "QSP:SCR"
query_command: "QSP:SCR"
response: "QSP:SCR*"
type: enum
values:
- "0"
- "5"
description: "0 / 5; On / off"
- id: screensaver_mode_query
label: Screensaver Mode
command: "QSC:MOD"
query_command: "QSC:MOD"
response: "QSC:MOD*"
type: enum
values:
- "0"
- "1"
- "2"
- "3"
- "4"
description: "0 / 1 / 2 / 3 / 4; OFF / Interval / Time Designation / ON / Autopower off"
- id: screensaver_interval_query
label: Screensaver Interval
command: "QSC:INT"
query_command: "QSC:INT"
response: "QSC:INT****<br>****"
type: string
description: "0000 to 2359, 0000 to 2359; Interval(HH:MM), Duration(HH:MM). <br> is source table markup. UNRESOLVED: wire separator."
- id: screensaver_time_query
label: Screensaver Time Designation
command: "QSC:TIM"
query_command: "QSC:TIM"
response: "QSC:TIM****<br>****"
type: string
description: "0000 to 2359, 0000 to 2359; Start(HH:MM), End(HH:MM). <br> is source table markup. UNRESOLVED: wire separator."
- id: screensaver_standby_query
label: Standby After Screensaver
command: "QSC:AOF"
query_command: "QSC:AOF"
response: "QSC:AOF****"
type: string
description: "0000 to 2359; Duration(HH:MM)"
- id: input_label_query
label: Current Input Label
command: "QSU:ILA"
query_command: "QSU:ILA"
response: "QSU:ILA***"
type: enum
values:
- INP
- PCN
- DV1
- DV2
- DV3
- BD1
- BD2
- BD3
- CTV
- VCR
- STB
- SKP
description: "INP / PCN / DV1 / DV2 / DV3 / BD1 / BD2 / BD3 / CTV / VCR / STB / SKP"
- id: input_label_by_input_query
label: Label For Specified Input
command: "QSU:ILAAV1"
query_command: "QSU:ILAAV1"
response: "QSU:ILAAV1***"
type: enum
values:
- INP
- PCN
- DV1
- DV2
- DV3
- BD1
- BD2
- BD3
- CTV
- VCR
- STB
- SKP
params:
- name: input
type: enum
values:
- AV1
- AV2
- PC1
- DV1
- HM1
- HM2
- SL1
- S1A
- S1B
description: "Select the documented inquiry token: AV1=QSU:ILAAV1; AV2=QSU:ILAAV2; PC1=QSU:ILAPC<br>1; DV1=QSU:ILADV<br>1; HM1=QSU:ILAHM<br>1; HM2=QSU:ILAHM<br>2; SL1=QSU:ILASL1; S1A=QSU:ILAS1A; S1B=QSU:ILAS1B. The command and query_command fields show the AV1 variant. <br> is source table markup."
description: "Response templates: AV1=QSU:ILAAV1***; AV2=QSU:ILAAV2***; PC1=QSU:ILAPC1***; DV1=QSU:ILADV1***; HM1=QSU:ILAHM1***; HM2=QSU:ILAHM2***; SL1=QSU:ILASL1***; S1A=QSU:ILAS1A***; S1B=QSU:ILAS1B***. PC1: PCN / DV1 / DV2 / DV3 / BD1 / BD2 / BD3 / CTV / VCR / STB / SKP. Other listed inputs: INP / DV1 / DV2 / DV3 / BD1 / BD2 / BD3 / CTV / VCR / STB / SKP."
- id: multi_display_setup_query
label: Multi Display Setup
command: QDC
query_command: QDC
response: "QDC:*<br>*<br>**"
type: string
description: "0 / 1, 0 to 5, 01 to 16; Multi Picture OFF / ON, Enlarge 2x2 / 3x3 / 4x4 / 2x2 frameless / 3x3 frameless / 4x4 frameless, Location A1 to D4. <br> is source table markup. UNRESOLVED: wire separators."
- id: multi_display_setup_ext_query
label: Multi Display Setup (Extended)
command: "QDC:EXT"
query_command: "QDC:EXT"
response: "QDC:EXT*<br>*<br>*<br>*<br>**"
type: string
description: "0 / 1, 1 to 5, 1 to 5, 0 / 1, 01 to 25; Multi pucture OFF / ON, Horizontal 1 to 5, Vertical 1 to 5, Flame setting OFF / ON, Loation (A1 to E5). <br> is source table markup. UNRESOLVED: wire separators."
- id: timer_program_query
label: Timer Program
command: "QIM:PRG**"
query_command: "QIM:PRG**"
response: "QIM:PRG**<br>*<br>***<br>***<br>****<br>***"
type: string
params:
- name: program_number
type: integer
min: 1
max: 20
description: "01 to 20"
description: "Program 01 to 20; setting 0 / 1; weekday MON / TUE / WED / THU / FRI / SAT / SUN / EVD; action PON / POF; time 0000 to 2359, Time(HH:MM); input AV1 / AV2 / PC1 / DV1 / HM1 / SL1 / (S1A / S1B). <br> is source table markup. UNRESOLVED: wire separators."
- id: present_day_query
label: Present Day
command: "QIM:DAY"
query_command: "QIM:DAY"
response: "QIM:DAY***"
type: enum
values:
- MON
- TUE
- WED
- THU
- FRI
- SAT
- SUN
description: "MON / TUE / WED / THU / FRI / SAT / SUN"
- id: present_time_query
label: Present Time
command: "QIM:NOW"
query_command: "QIM:NOW"
response: "QIM:NOW****"
type: string
description: "0000 to 2359; Current time(HH:MM)"
- id: input_search_query
label: Input Search
command: "QSH:FNC"
query_command: "QSH:FNC"
response: "QSH:FNC***"
type: enum
values:
- "OFF"
- ALL
- PRI
description: "OFF / ALL / PRI; OFF / All input / priority search"
- id: primary_input_query
label: Primary Input
command: "QSH:PRI"
query_command: "QSH:PRI"
response: "QSH:PRI***"
type: enum
values:
- NON
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
description: "NON / AV1 / AV2 / PC1 / DV1 / HM1 / SL1 (/ S1A / S1B)"
- id: secondary_input_query
label: Secondary Input
command: "QSH:SCI"
query_command: "QSH:SCI"
response: "QSH:SCI***"
type: enum
values:
- NON
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
description: "NON / AV1 / AV2 / PC1 / DV1 / HM1 / SL1 (/ S1A / S1B)"
- id: osd_query
label: On Screen Display
command: "QSP:OSD"
query_command: "QSP:OSD"
response: "QSP:OSD*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: initial_input_query
label: Initial Input
command: "QSP:IIN"
query_command: "QSP:IIN"
response: "QSP:IIN***"
type: enum
values:
- "OFF"
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
description: "OFF / AV1 / AV2 / PC1 / DV1 / HM1 / SL1 (/ S1A / S1B)"
- id: initial_vol_level_query
label: Initial Volume Level
command: "QSP:IVL"
query_command: "QSP:IVL"
response: "QSP:IVL****"
type: string
description: "0 / 1, 000 to 100; OFF / ON, 0 to 100"
- id: max_vol_level_query
label: Maximum Volume Level
command: "QSP:MVL"
query_command: "QSP:MVL"
response: "QSP:MVL****"
type: string
description: "0 / 1, 000 to 100; OFF / ON, 0 to 100"
- id: input_lock_query
label: Input Lock
command: "QSP:INL"
query_command: "QSP:INL"
response: "QSP:INL***"
type: enum
values:
- "OFF"
- AV1
- AV2
- PC1
- DV1
- HM1
- SL1
- S1A
- S1B
description: "OFF / AV1 / AV2 / PC1 / DV1 / HM1 / SL1 (/ S1A / S1B)"
- id: button_lock_query
label: Button Lock
command: "QSP:BTL"
query_command: "QSP:BTL"
response: "QSP:BTL***"
type: enum
values:
- "OFF"
- MEN
- ALL
description: "OFF / MEN / ALL; OFF / MENU&ENTER / ON"
- id: remocon_user_level_query
label: Remote User Level
command: "QSP:RCM"
query_command: "QSP:RCM"
response: "QSP:RCM*"
type: enum
values:
- "0"
- "1"
- "2"
- "3"
description: "0 / 1 / 2 / 3; OFF / User1 / User2 / User3"
- id: off_timer_query
label: Off Timer Function
command: "QSP:OFT"
query_command: "QSP:OFT"
response: "QSP:OFT*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: function_key_query
label: Function Key
command: "QSP:KFN*"
query_command: "QSP:KFN*"
response: "QSP:KFN*<br>***"
type: enum
values:
- SIG
- SSV
- ECO
- SUT
params:
- name: key_number
type: enum
values:
- "1"
- "2"
description: "1 / 2; for FUNCTION KEY 1 / for FUNCTION KEY 2"
description: "SIG / SSV / ECO / SUT. Response includes the selected key number. <br> is source table markup. UNRESOLVED: wire separator."
- id: initial_power_mode_query
label: Initial Power Mode
command: "QSP:IPM"
query_command: "QSP:IPM"
response: "QSP:IPM***"
type: enum
values:
- NOR
- PON
- STB
description: "NOR / PON / STB; Normal/ Power on /standby"
- id: power_on_screen_delay_query
label: Power On Screen Delay
command: "QSP:POD"
query_command: "QSP:POD"
response: "QSP:POD**"
type: integer
min: 0
max: 30
description: "00 to 30; 0 to 30 sec"
- id: clock_display_query
label: Clock Display
command: "QSP:CLK"
query_command: "QSP:CLK"
response: "QSP:CLK*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: power_on_message_query
label: Power On Message (No Activity)
command: "QSP:NAP"
query_command: "QSP:NAP"
response: "QSP:NAP*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: studio_white_balance_query
label: Studio White Balance
command: "QSP:SWB"
query_command: "QSP:SWB"
response: "QSP:SWB*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; OFF / ON"
- id: slot_power_query
label: Slot Power
command: "QSP:SLP"
query_command: "QSP:SLP"
response: "QSP:SLP*"
type: enum
values:
- OF
- AT
- "ON"
description: "OF / AT / ON; SLOT POWER OFF / SLOT POWER AUTO ON / SLOT POWER ON. Response wildcard width retained as documented."
- id: sdi_audio_output_query
label: SDI Audio Output
command: "QSD:OUT"
query_command: "QSD:OUT"
response: "QSD:OUT*"
type: enum
values:
- "0"
- "1"
description: "0 / 1; off / on"
- id: sdi_left_channel_query
label: SDI Left Channel
command: "QSD:LCH"
query_command: "QSD:LCH"
response: "QSD:LCH**"
type: integer
min: 1
max: 16
description: "01 – 16"
- id: sdi_right_channel_query
label: SDI Right Channel
command: "QSD:RCH"
query_command: "QSD:RCH"
response: "QSD:RCH**"
type: integer
min: 1
max: 16
description: "01 – 16"
- id: sdi_level_meter_query
label: SDI Level Meter Display
command: "QSD:LMT"
query_command: "QSD:LMT"
response: "QSD:LMT*"
type: enum
values:
- "0"
- "1"
- "2"
description: "0 / 1 / 2; Off / display 1-8CH / display 9-16CH"
Variables
# All settable parameters are covered by Actions entries above.
# No additional Variables beyond what Actions already represent.
Events
# UNRESOLVED: source does not describe unsolicited notifications or event push model
Macros
# UNRESOLVED: source does not describe multi-step macro sequences
Safety
confirmation_required_for: []
interlocks:
- description: "When power is off, display only responds to PON command"
# UNRESOLVED: no additional safety warnings, interlock procedures, or power-on sequencing found in source
Notes
- Command format:
<STX><command>:<params><ETX>(STX=0x02, ETX=0x03), documented for serial control. - RS-232C:
<STX>command<ETX>. SLOT UART:<STX>AD95;command<ETX> - Serial ID targeting:
<STX>AD94;RAD=<NUM>;command<ETX>(RS-232C only, e.g. RAD=001 for ID 1) - Error response:
ER401for incorrect commands - Response interval: under 100ms from command to response
- Must wait for response before sending next command
- Straight-through serial cable required
- S1A/S1B inputs only available with dual input terminal board installed
- Parameter padding uses leading zeros (e.g.
000–100for 3-digit fields)
Provenance
source_domains:
- docs.connect.panasonic.com
- ptzprotocols.com
- mediarealm.com.au
- github.com
- help.na.panasonic.com
source_urls:
- https://docs.connect.panasonic.com/prodisplays/support/download/pdf/LF50_SerialCommandList.pdf
- "https://ptzprotocols.com/1%20TXB%20Protocols/TXB-Panasonic/Panasonic%20Camera%20Protocol_4.0.pdf"
- https://www.mediarealm.com.au/articles/panasonic-projector-commands/
- https://github.com/ssjoholm/panasonic-cn-cnt/blob/main/Panasonic-CN-CNT-Protocol-v1.md
- https://help.na.panasonic.com/manuals/
retrieved_at: 2026-05-19T04:38:31.405Z
last_checked_at: 2026-10-07T15:43:28.941Z
Verification Summary
verdict: verified
checked_at: 2026-10-07T15:43:28.941Z
matched_actions: 206
action_count: 206
confidence: medium
summary: "All 206 action units match source literals with correct shapes; serial transport values are confirmed and the spec covers essentially the full command table. (15 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "LAN framing details and default port are not stated in source."
- "firmware version compatibility not stated in source"
- "default LAN port not stated in source; SSU:LCP sets the port number (1024-65535 excluding 4352 and 10000)"
- "wire separators between the four fields.\""
- "whether STD(AUT) denotes alternative response tokens.\""
- "wire separators.\""
- "inquiry wildcard semantics.\""
- "wire separator.\""
- "source does not describe unsolicited notifications or event push model"
- "source does not describe multi-step macro sequences"
- "no additional safety warnings, interlock procedures, or power-on sequencing found in source"
- "LAN framing is not specified in the source."
- "default LAN port not stated"
- "maximum command queue depth or timing constraints beyond \"wait for response\""
- "firmware version compatibility range"
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0