AI4AVSummary
Optoma GT4000UHD projector control spec covering RS-232 serial protocol (19200 baud default, 8N1) per vendor RS232 Protocol Function List. Document enumerates write/read command set, response format, and query commands. Spec also notes Telnet, HTTP, Crestron, Extron, PJ Link, AMX Device Discovery control paths enabled via ~XX458 / ~XX459. Source scoped to RS-232 only — no IP port number stated.
Transport
# RS232 is the primary documented transport. Source also enables Telnet (~XX458)
# and HTTP (~XX459) via RS232 toggles, but does not state TCP/HTTP ports, so
# tcp/http protocol groups are emitted with UNRESOLVED addressing.
protocols:
- serial
- tcp # inferred from Telnet enable command ~XX458
- http # inferred from HTTP enable command ~XX459
serial:
baud_rate: 19200 # default per source; range 9600-115200 supported
data_bits: 8
parity: none
stop_bits: 1
flow_control: none
# UNRESOLVED: TCP port for Telnet not stated in source
addressing:
port: null # UNRESOLVED: TCP port not stated in source
base_url: null # UNRESOLVED: HTTP base URL not stated in source
auth:
type: none # inferred: no auth procedure in source
Traits
- powerable # inferred from Power On/Off commands (~XX00)
- routable # inferred from input source select commands (~XX12, ~XX305)
- queryable # inferred from query commands (~XX121, ~XX122, ~XX124, ~XX125-129, ~XX150, ~XX151, ~XX353, etc.)
- levelable # inferred from brightness/contrast/volume-style range commands
Actions
# CRITICAL: write/read command format = "~XX{cmmd} {param}<CR>"
# Lead code "~", Projector ID (00-99, 00=all), Command (000-999), space, param (0-9999), CR (0x0D).
# Response on pass: "P"; on fail: "F". Read pass: "O k {value}".
# Each command below maps to a distinct source row.
- id: power_on
label: Power On
kind: action
command: "~XX00 1"
params: []
- id: power_off
label: Power Off
kind: action
command: "~XX00 0"
params: []
- id: power_status_query
label: Power Status Query
kind: query
command: "~XX124"
params: []
# returns: Ok0 (off) / Ok1 (on)
- id: re_sync
label: Re-Sync
kind: action
command: "~XX01 1"
params: []
- id: av_mute_off
label: AV Mute Off
kind: action
command: "~XX02 0"
params: []
- id: av_mute_on
label: AV Mute On
kind: action
command: "~XX02 1"
params: []
- id: av_mute_query
label: AV Mute Query
kind: query
command: "~XX355"
params: []
# returns: Ok0 / Ok1
- id: freeze_unfreeze
label: Freeze Unfreeze
kind: action
command: "~XX04 0"
params: []
- id: freeze_freeze
label: Freeze Freeze
kind: action
command: "~XX04 1"
params: []
- id: display_mode
label: Display Mode
kind: action
command: "~XX20 {n}"
params:
- name: n
type: integer
description: "0=No Signal, 1=Presentation, 2=Bright, 3=Cinema, 4=sRGB, 5=User, 9=3D, 10=DICOM SIM, 13=DICOM SIM alt, 19=Blending, 21=HDR"
# read: ~XX123
- id: display_mode_query
label: Display Mode Query
kind: query
command: "~XX123"
params: []
- id: wall_color
label: Wall Color
kind: action
command: "~XX506 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=Blackboard, 3=Light Green, 4=Light Blue, 5=Pink, 6=Gray, 7=Light Yellow"
- id: hdr
label: HDR (DynamicRange)
kind: action
command: "~XX565 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=Auto"
- id: hdr_picture_mode
label: HDR Picture Mode
kind: action
command: "~XX566 {n}"
params:
- name: n
type: integer
description: "0=Bright, 1=Standard, 2=Film, 3=Detail, 4=SMPTE 2084"
- id: brightness_decrement
label: Brightness -
kind: action
command: "~XX46 1"
params: []
- id: brightness_increment
label: Brightness +
kind: action
command: "~XX46 2"
params: []
- id: brightness_set
label: Brightness Set
kind: action
command: "~XX21 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: brightness_query
label: Brightness Query
kind: query
command: "~XX125"
params: []
- id: contrast_decrement
label: Contrast -
kind: action
command: "~XX47 1"
params: []
- id: contrast_increment
label: Contrast +
kind: action
command: "~XX47 2"
params: []
- id: contrast_set
label: Contrast Set
kind: action
command: "~XX22 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: contrast_query
label: Contrast Query
kind: query
command: "~XX126"
params: []
- id: sharpness_set
label: Sharpness Set
kind: action
command: "~XX23 {1-15}"
params:
- name: value
type: integer
description: "1..15"
- id: color_set
label: Color Set
kind: action
command: "~XX45 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: tint_set
label: Tint Set
kind: action
command: "~XX44 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: gamma
label: Gamma
kind: action
command: "~XX35 {n}"
params:
- name: n
type: integer
description: "1=Film, 2=Video, 3=Graphics, 4=Standard(2.2), 5=1.8, 6=2.0, 11=DICOM SIM, 12=2.4"
- id: brilliant_color
label: BrilliantColor
kind: action
command: "~XX34 {0-10}"
params:
- name: value
type: integer
description: "0..10"
- id: color_temperature
label: Color Temperature
kind: action
command: "~XX36 {n}"
params:
- name: n
type: integer
description: "1=Standard, 2=Cool, 4=Warm"
# read: ~XX128 returns 0=Standard, 1=Cool, 3=Warm
- id: color_temperature_query
label: Color Temperature Query
kind: query
command: "~XX128"
params: []
- id: color_match_r_hue
label: Color Match R Hue
kind: action
command: "~XX327 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_r_saturation
label: Color Match R Saturation
kind: action
command: "~XX333 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_r_gain
label: Color Match R Gain
kind: action
command: "~XX339 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_g_hue
label: Color Match G Hue
kind: action
command: "~XX328 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_g_saturation
label: Color Match G Saturation
kind: action
command: "~XX334 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_g_gain
label: Color Match G Gain
kind: action
command: "~XX340 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_b_hue
label: Color Match B Hue
kind: action
command: "~XX329 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_b_saturation
label: Color Match B Saturation
kind: action
command: "~XX335 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_b_gain
label: Color Match B Gain
kind: action
command: "~XX341 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_c_hue
label: Color Match C Hue
kind: action
command: "~XX330 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_c_saturation
label: Color Match C Saturation
kind: action
command: "~XX336 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_c_gain
label: Color Match C Gain
kind: action
command: "~XX342 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_m_hue
label: Color Match M Hue
kind: action
command: "~XX332 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_m_saturation
label: Color Match M Saturation
kind: action
command: "~XX338 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_m_gain
label: Color Match M Gain
kind: action
command: "~XX344 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_y_hue
label: Color Match Y Hue
kind: action
command: "~XX331 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_y_saturation
label: Color Match Y Saturation
kind: action
command: "~XX337 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_y_gain
label: Color Match Y Gain
kind: action
command: "~XX343 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_w_red
label: Color Match W Red
kind: action
command: "~XX345 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_w_green
label: Color Match W Green
kind: action
command: "~XX346 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_w_blue
label: Color Match W Blue
kind: action
command: "~XX347 {0-254}"
params:
- name: value
type: integer
description: "0..254"
- id: color_match_reset
label: Color Match Reset
kind: action
command: "~XX215 1"
params:
- name: confirm
type: enum
values: [cancel, yes]
- id: rgb_gain_red
label: Red Gain
kind: action
command: "~XX24 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: rgb_gain_green
label: Green Gain
kind: action
command: "~XX25 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: rgb_gain_blue
label: Blue Gain
kind: action
command: "~XX26 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: rgb_bias_red
label: Red Bias
kind: action
command: "~XX27 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: rgb_bias_green
label: Green Bias
kind: action
command: "~XX28 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: rgb_bias_blue
label: Blue Bias
kind: action
command: "~XX29 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: rgb_gain_bias_reset
label: RGB Gain/Bias Reset
kind: action
command: "~XX517 1"
params: []
- id: color_space
label: Color Space
kind: action
command: "~XX37 {n}"
params:
- name: n
type: integer
description: "1=Auto, 2=RGB(0-255), 3=YUV, 4=RGB(16-235)"
- id: ultra_detail
label: UltraDetail
kind: action
command: "~XX41 {n}"
params:
- name: n
type: integer
description: "0=Off, 4=1, 5=2, 6=3"
- id: extreme_black
label: Extreme Black
kind: action
command: "~XX218 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=On"
- id: dynamic_black
label: Dynamic Black
kind: action
command: "~XX191 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=On"
- id: brightness_mode
label: Brightness Mode
kind: action
command: "~XX110 {n}"
params:
- name: n
type: integer
description: "2=Eco Mode, 6=Constant Power, 7=Constant Luminance"
- id: power_level
label: Power Level
kind: action
command: "~XX326 {1-100}"
params:
- name: value
type: integer
description: "1..100"
- id: pure_contrast
label: PureContrast
kind: action
command: "~XX219 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=On"
- id: pure_color
label: PureColor
kind: action
command: "~XX42 {n}"
params:
- name: n
type: integer
description: "0=Off, 1..5"
- id: pure_motion
label: PureMotion
kind: action
command: "~XX190 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=1, 2=2, 3=3"
- id: pure_motion_demo
label: PureMotion Demo
kind: action
command: "~XX197 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=H Split, 2=V Split"
- id: image_reset
label: Image Settings Reset
kind: action
command: "~XX509 1"
params: []
- id: threed_mode
label: 3D Mode
kind: action
command: "~XX230 {n}"
params:
- name: n
type: integer
description: "0=Off, 4=On"
- id: threed_format
label: 3D Format
kind: action
command: "~XX405 {n}"
params:
- name: n
type: integer
description: "0=Auto, 1=Side by Side, 2=Top and Bottom, 3=Frame Sequential, 7=Frame Packing"
- id: threed_2d
label: 3D-2D
kind: action
command: "~XX400 {n}"
params:
- name: n
type: integer
description: "0=3D, 1=L, 2=R"
- id: threed_sync_invert
label: 3D Sync Invert
kind: action
command: "~XX231 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=On"
- id: threed_sync_out
label: 3D Sync Out
kind: action
command: "~XX232 {n}"
params:
- name: n
type: integer
description: "0=To Emitter, 1=To Next Projector"
- id: lr_reference
label: L/R Reference
kind: action
command: "~XX236 {n}"
params:
- name: n
type: integer
description: "0=Field GPIO, 1=1ST Frame"
- id: threed_frame_delay
label: 3D Frame Delay
kind: action
command: "~XX233 {1-200}"
params:
- name: value
type: integer
description: "1..200"
- id: threed_frame_delay_query
label: 3D Frame Delay Query
kind: query
command: "~XX233"
params: []
- id: threed_reset
label: 3D Reset
kind: action
command: "~XX234 1"
params: []
- id: aspect_ratio
label: Aspect Ratio
kind: action
command: "~XX60 {n}"
params:
- name: n
type: integer
description: "1=4:3, 2=16:9, 3=16:10, 5=LBX, 6=Native, 7=Auto"
# read: ~XX127
- id: aspect_ratio_query
label: Aspect Ratio Query
kind: query
command: "~XX127"
params: []
- id: digital_zoom_h
label: Digital Zoom H
kind: action
command: "~XX504 {50-400}"
params:
- name: value
type: integer
description: "50..400 (%)"
# read: ~XX543 param 8
- id: digital_zoom_v
label: Digital Zoom V
kind: action
command: "~XX505 {50-400}"
params:
- name: value
type: integer
description: "50..400 (%)"
# read: ~XX543 param 7
- id: image_shift_h
label: Image Shift H
kind: action
command: "~XX63 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: image_shift_v
label: Image Shift V
kind: action
command: "~XX64 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: geometric_h_arc
label: H Arc
kind: action
command: "~XX300 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: geometric_v_arc
label: V Arc
kind: action
command: "~XX301 {0-100}"
params:
- name: value
type: integer
description: "0..100"
- id: four_corners_topleft_x
label: Four Corners Top-Left X
kind: action
command: "~XX581 {0-120}"
params:
- name: value
type: integer
description: "0..120"
- id: four_corners_topleft_y
label: Four Corners Top-Left Y
kind: action
command: "~XX582 {0-80}"
params:
- name: value
type: integer
description: "0..80"
- id: four_corners_topright_x
label: Four Corners Top-Right X
kind: action
command: "~XX583 {0-120}"
params:
- name: value
type: integer
description: "0..120"
- id: four_corners_topright_y
label: Four Corners Top-Right Y
kind: action
command: "~XX584 {0-80}"
params:
- name: value
type: integer
description: "0..80"
- id: four_corners_bottomleft_x
label: Four Corners Bottom-Left X
kind: action
command: "~XX585 {0-120}"
params:
- name: value
type: integer
description: "0..120"
- id: four_corners_bottomleft_y
label: Four Corners Bottom-Left Y
kind: action
command: "~XX586 {0-80}"
params:
- name: value
type: integer
description: "0..80"
- id: four_corners_bottomright_x
label: Four Corners Bottom-Right X
kind: action
command: "~XX587 {0-120}"
params:
- name: value
type: integer
description: "0..120"
- id: four_corners_bottomright_y
label: Four Corners Bottom-Right Y
kind: action
command: "~XX588 {0-80}"
params:
- name: value
type: integer
description: "0..80"
- id: four_corners_top_left_apply
label: Four Corners Apply Top-Left
kind: action
command: "~XX59 1"
params: []
# Note: source lists TL/TR/BL/BR apply as ~XX59 sub-values 1-16
- id: four_corners_top_right_apply
label: Four Corners Apply Top-Right
kind: action
command: "~XX59 5"
params: []
- id: four_corners_bottom_left_apply
label: Four Corners Apply Bottom-Left
kind: action
command: "~XX59 9"
params: []
- id: four_corners_bottom_right_apply
label: Four Corners Apply Bottom-Right
kind: action
command: "~XX59 13"
params: []
- id: h_keystone
label: H Keystone
kind: action
command: "~XX65 {0-40}"
params:
- name: value
type: integer
description: "0..40"
- id: v_keystone
label: V Keystone
kind: action
command: "~XX66 {0-40}"
params:
- name: value
type: integer
description: "0..40"
- id: warp_blend_pc_connection
label: Warp/Blend PC Connection
kind: query
command: "~XX132 3"
params: []
# returns: Ok0 (No) / Ok1 (Yes)
- id: warp_blend_settings
label: Warp/Blend Settings
kind: action
command: "~XX142 {n}"
params:
- name: n
type: integer
description: "0=All Off, 3=All On, 4=Blend Off"
# read: ~XX132 1
- id: warp_blend_memory
label: Warp/Blend Memory
kind: action
command: "~XX147 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=User1, 2=User2, 3=User3"
# read: ~XX137
- id: warp_blend_memory_query
label: Warp/Blend Memory Query
kind: query
command: "~XX137"
params: []
- id: geometric_reset
label: Geometric Correction Reset
kind: action
command: "~XX561 1"
params: []
- id: pip_pbp_screen
label: PIP/PBP Screen
kind: action
command: "~XX302 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=PIP, 2=PBP"
- id: pip_pbp_location
label: PIP/PBP Location
kind: action
command: "~XX303 {n}"
params:
- name: n
type: integer
description: "1=PIP-TopLeft, 2=PIP-TopRight, 3=PIP-Bottom Left, 4=PIP-Bottom Right, 5=PBP Main Left, 6=PBP Main Top, 7=PBP Main Right, 8=PBP Main Bottom"
- id: pip_pbp_size
label: PIP/PBP Size
kind: action
command: "~XX304 {n}"
params:
- name: n
type: integer
description: "1=Large, 2=Medium, 3=Small"
- id: main_source_hdmi1
label: Main Source HDMI1
kind: action
command: "~XX12 1"
params: []
# read: ~XX121 returns Ok7
- id: main_source_hdmi2
label: Main Source HDMI2
kind: action
command: "~XX12 15"
params: []
# read: ~XX121 returns Ok8
- id: main_source_displayport
label: Main Source DisplayPort
kind: action
command: "~XX12 20"
params: []
# read: ~XX121 returns Ok15
- id: main_source_hdbaset
label: Main Source HDBaseT
kind: action
command: "~XX12 21"
params: []
# read: ~XX121 returns Ok16
- id: main_source_3gsdi
label: Main Source 3G-SDI
kind: action
command: "~XX12 22"
params: []
# read: ~XX121 returns Ok18
- id: sub_source_hdmi1
label: Sub Source HDMI1
kind: action
command: "~XX305 1"
params: []
# read: ~XX131 returns Ok7
- id: sub_source_hdmi2
label: Sub Source HDMI2
kind: action
command: "~XX305 4"
params: []
# read: ~XX131 returns Ok8
- id: sub_source_displayport
label: Sub Source DisplayPort
kind: action
command: "~XX305 17"
params: []
# read: ~XX131 returns Ok15
- id: sub_source_hdbaset
label: Sub Source HDBaseT
kind: action
command: "~XX305 10"
params: []
# read: ~XX131 returns Ok16
- id: sub_source_3gsdi
label: Sub Source 3G-SDI
kind: action
command: "~XX305 11"
params: []
# read: ~XX131 returns Ok17
- id: pip_pbp_swap
label: PIP/PBP Swap
kind: action
command: "~XX306 1"
params: []
- id: projection_mode
label: Projection Mode
kind: action
command: "~XX71 {n}"
params:
- name: n
type: integer
description: "1=Front, 2=Rear, 3=Ceiling-top, 4=Rear-top"
# read: ~XX129
- id: projection_mode_query
label: Projection Mode Query
kind: query
command: "~XX129"
params: []
- id: lens_zoom_plus
label: Lens Zoom +
kind: action
command: "~XX307 1"
params: []
- id: lens_zoom_minus
label: Lens Zoom -
kind: action
command: "~XX307 2"
params: []
- id: lens_focus_plus
label: Lens Focus +
kind: action
command: "~XX308 1"
params: []
- id: lens_focus_minus
label: Lens Focus -
kind: action
command: "~XX308 2"
params: []
- id: lens_function_lock
label: Lens Function Lock
kind: action
command: "~XX349 1"
params: []
- id: lens_function_unlock
label: Lens Function Unlock
kind: action
command: "~XX349 2"
params: []
- id: lens_function_query
label: Lens Function Query
kind: query
command: "~XX545 4"
params: []
- id: lens_shift_up
label: Lens Shift Up
kind: action
command: "~XX84 3"
params: []
- id: lens_shift_down
label: Lens Shift Down
kind: action
command: "~XX84 4"
params: []
- id: lens_shift_left
label: Lens Shift Left
kind: action
command: "~XX84 5"
params: []
- id: lens_shift_right
label: Lens Shift Right
kind: action
command: "~XX84 6"
params: []
- id: lens_calibration_yes
label: Lens Calibration Yes
kind: action
command: "~XX525 1"
params: []
- id: lens_calibration_no
label: Lens Calibration No
kind: action
command: "~XX525 0"
params: []
- id: lens_memory_apply
label: Lens Memory Apply Position
kind: action
command: "~XX359 {1-5}"
params:
- name: position
type: integer
description: "1..5"
- id: lens_memory_save
label: Lens Memory Save Current Position
kind: action
command: "~XX360 {1-5}"
params:
- name: position
type: integer
description: "1..5"
- id: lens_memory_reset
label: Lens Memory Reset
kind: action
command: "~XX361 1"
params:
- id: direct_power_on_off
label: Direct Power On Off
kind: action
command: "~XX105 0"
params: []
- id: direct_power_on_on
label: Direct Power On On
kind: action
command: "~XX105 1"
params: []
- id: auto_power_off
label: Auto Power Off (min)
kind: action
command: "~XX106 {0-180}"
params:
- name: minutes
type: integer
description: "0..180 in 5-minute increments"
- id: sleep_timer
label: Sleep Timer (min)
kind: action
command: "~XX107 {000-990}"
params:
- name: minutes
type: integer
description: "000..990 in 30-minute increments"
- id: always_on_no
label: Always On No
kind: action
command: "~XX507 0"
params: []
- id: always_on_yes
label: Always On Yes
kind: action
command: "~XX507 1"
params: []
- id: power_mode_standby_eco
label: Power Mode (Standby) Eco
kind: action
command: "~XX114 0"
params: []
# read: ~XX150 16 returns Ok1
- id: power_mode_standby_active
label: Power Mode (Standby) Active
kind: action
command: "~XX114 1"
params: []
# read: ~XX150 16 returns Ok0
- id: power_mode_standby_communications
label: Power Mode (Standby) Communications
kind: action
command: "~XX114 3"
params: []
# read: ~XX150 16 returns Ok3
- id: power_mode_standby_query
label: Power Mode (Standby) Query
kind: query
command: "~XX150 16"
params: []
- id: security_off
label: Security Off
kind: action
command: "~XX78 0 nnnn"
params:
- name: code
type: string
description: "4-digit passcode"
- id: security_on
label: Security On
kind: action
command: "~XX78 1 nnnn"
params:
- name: code
type: string
description: "4-digit passcode"
- id: security_timer_month
label: Security Timer Month
kind: action
command: "~XX537 {00-12}"
params:
- name: month
type: string
description: "00..12"
# read: ~XX544 1
- id: security_timer_day
label: Security Timer Day
kind: action
command: "~XX538 {00-29}"
params:
- name: day
type: string
description: "00..29"
# read: ~XX544 2
- id: security_timer_hour
label: Security Timer Hour
kind: action
command: "~XX539 {00-23}"
params:
- name: hour
type: string
description: "00..23"
# read: ~XX544 3
- id: security_timer_set
label: Security Timer Set (RS232 only)
kind: action
command: "~XX77 MMDDHH"
params:
- name: mmddhh
type: string
description: "MMDDHH format"
- id: test_pattern
label: Test Pattern
kind: action
command: "~XX195 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=White Grid, 2=White, 3=Green Grid, 4=Magenta Grid, 5=Red, 6=Green, 7=Blue, 8=Yellow, 9=Magenta, 10=Cyan, 11=Black"
- id: ir_front_off
label: IR Front Off
kind: action
command: "~XX11 4"
params: []
# read: ~XX542 1
- id: ir_front_on
label: IR Front On
kind: action
command: "~XX11 5"
params: []
# read: ~XX542 1
- id: ir_top_off
label: IR Top Off
kind: action
command: "~XX11 6"
params: []
# read: ~XX542 2
- id: ir_top_on
label: IR Top On
kind: action
command: "~XX11 7"
params: []
# read: ~XX542 2
- id: ir_hdbaset_off
label: IR HDBaseT Off
kind: action
command: "~XX11 10"
params: []
- id: ir_hdbaset_on
label: IR HDBaseT On
kind: action
command: "~XX11 9"
params: []
- id: ir_front_query
label: IR Front Query
kind: query
command: "~XX542 1"
params: []
- id: ir_top_query
label: IR Top Query
kind: query
command: "~XX542 2"
params: []
- id: remote_code_set
label: Remote Code Set
kind: action
command: "~XX350 {00-99}"
params:
- name: code
type: string
description: "00..99"
- id: remote_code_query
label: Remote Code Query
kind: query
command: "~XX350"
params: []
- id: hot_key_settings
label: Hot-Key Settings
kind: action
command: "~XX117 {1-2}"
params:
- name: value
type: integer
description: "1=Aspect Ratio, 2=Freeze Screen"
- id: trigger_12v_off
label: 12V Trigger Off
kind: action
command: "~XX192 0"
params: []
- id: trigger_12v_on
label: 12V Trigger On
kind: action
command: "~XX192 1"
params: []
- id: projector_id_set
label: Projector ID Set
kind: action
command: "~XX79 {00-99}"
params:
- name: id
type: string
description: "00..99"
- id: projector_id_query
label: Projector ID Query
kind: query
command: "~XX558"
params: []
- id: light_sensor_default
label: Light Sensor Default
kind: action
command: "~XX552 0"
params: []
- id: light_sensor_manual
label: Light Sensor Manual
kind: action
command: "~XX552 2"
params: []
- id: light_sensor_calibration
label: Light Sensor Calibration
kind: action
command: "~XX552 2"
params: []
# NOTE: source maps Default=0, Manual=2, and Calibration row also = 2.
# Source row "Light Sensor Calibration" is a single discrete action in the doc.
- id: keypad_led_off
label: Keypad LED Off
kind: action
command: "~XX362 0"
params: []
- id: keypad_led_on
label: Keypad LED On
kind: action
command: "~XX362 1"
params: []
- id: language
label: Language
kind: action
command: "~XX70 {n}"
params:
- name: n
type: integer
description: "1=English, 2=Deutsch, 3=Français, 4=Italiano, 5=Español, 6=Português, 7=Polski, 8=Nederlands, 9=Svenska, 10=Norsk/Dansk, 11=Suomi, 12=ελληνικά, 13=繁體中文, 14=簡体中文, 15=日本語, 16=한국어, 17=Русский, 18=Magyar, 19=Čeština, 21=ไทย, 22=Türkçe, 25=TiếngViệt, 26=Bahasa Indonesia, 27=Română, 28=Slovakian"
- id: menu_location
label: Menu Location
kind: action
command: "~XX72 {n}"
params:
- name: n
type: integer
description: "1=Top left, 2=Top right, 3=Center, 4=Bottom left, 5=Bottom right"
- id: menu_transparency
label: Menu Transparency
kind: action
command: "~XX526 {0-9}"
params:
- name: value
type: integer
description: "0..9"
- id: menu_timer
label: Menu Timer
kind: action
command: "~XX515 {n}"
params:
- name: n
type: integer
description: "0=Off, 1=5s, 3=10s, 4=15s"
- id: auto_source_off
label: Auto Source Off
kind: action
command: "~XX563 0"
params: []
- id: auto_source_on
label: Auto Source On
kind: action
command: "~XX563 1"
params: []
- id: input_source_hdmi1
label: Input Source HDMI1
kind: action
command: "~XX12 1"
params: []
# read: ~XX121 Ok7
- id: input_source_hdmi2
label: Input Source HDMI2
kind: action
command: "~XX12 15"
params: []
# read: ~XX121 Ok8
- id: input_source_displayport
label: Input Source DisplayPort
kind: action
command: "~XX12 20"
params: []
# read: ~XX121 Ok15
- id: input_source_hdbaset
label: Input Source HDBaseT
kind: action
command: "~XX12 21"
params: []
# read: ~XX121 Ok16
- id: input_source_3gsdi
label: Input Source 3G-SDI
kind: action
command: "~XX12 22"
params: []
# read: ~XX121 Ok18
- id: input_source_query
label: Input Source Query
kind: query
command: "~XX121"
params: []
- id: sub_source_query
label: Sub Source Query
kind: query
command: "~XX131"
params: []
- id: high_altitude_off
label: High Altitude Off
kind: action
command: "~XX101 0"
params: []
- id: high_altitude_on
label: High Altitude On
kind: action
command: "~XX101 1"
params: []
- id: information_hide_off
label: Information Hide Off
kind: action
command: "~XX102 0"
params: []
- id: information_hide_on
label: Information Hide On
kind: action
command: "~XX102 1"
params: []
- id: logo
label: Logo
kind: action
command: "~XX82 {n}"
params:
- name: n
type: integer
description: "1=Default, 3=Neutral"
- id: background_color
label: Background Color
kind: action
command: "~XX104 {n}"
params:
- name: n
type: integer
description: "0=None, 1=Blue, 3=Red, 4=Green, 6=Gray, 7=Logo"
- id: serial_port_baud_rate_query
label: Serial Port Baud Rate Query
kind: query
command: "~XX153"
params: []
# returns: 9600 / 14400 / 19200 / 38400 / 57600 / 115200
- id: serial_port_path_rs232
label: Serial Port Path RS232
kind: action
command: "~XX557 1"
params: []
- id: serial_port_path_hdbaset
label: Serial Port Path HDBaseT
kind: action
command: "~XX557 2"
params: []
- id: system_update_notification_on
label: System Update Notification On
kind: action
command: "~XX168 1"
params: []
# read: ~XX158
- id: system_update_notification_off
label: System Update Notification Off
kind: action
command: "~XX168 0"
params: []
# read: ~XX158
- id: system_update_notification_query
label: System Update Notification Query
kind: query
command: "~XX158"
params: []
- id: system_update
label: System Update
kind: action
command: "~XX168 9"
params:
- name: confirm
type: enum
values: [cancel, yes]
- id: reset_osd
label: Reset OSD
kind: action
command: "~XX546 1"
params:
- name: confirm
type: enum
values: [cancel, yes]
- id: reset_to_default
label: Reset to Default
kind: action
command: "~XX112 1"
params:
- name: confirm
type: enum
values: [cancel, yes]
- id: wlan_off
label: WLAN Off
kind: action
command: "~XX450 0"
params: []
- id: wlan_on
label: WLAN On
kind: action
command: "~XX450 1"
params: []
- id: wlan_ip_address_query
label: WLAN IP Address Query
kind: query
command: "~XX451 2"
params: []
- id: wlan_start_ip_query
label: WLAN Start IP Query
kind: query
command: "~XX451 5"
params: []
- id: wlan_end_ip_query
label: WLAN End IP Query
kind: query
command: "~XX451 6"
params: []
- id: wlan_ssid_query
label: WLAN SSID Query
kind: query
command: "~XX451 3"
params: []
- id: lan_mac_address_query
label: LAN MAC Address Query
kind: query
command: "~XX555"
params: []
- id: lan_dhcp_query
label: LAN DHCP Query
kind: query
command: "~XX150 17"
params: []
# returns: Ok0 (Off) / Ok1 (On)
# NOTE: source also reuses ~XX150 17 for Standby Power "Off" in the regulatory table
- id: lan_ip_address_query
label: LAN IP Address Query
kind: query
command: "~XX87 3"
params: []
- id: crestron_off
label: Crestron Off
kind: action
command: "~XX454 0"
params: []
- id: crestron_on
label: Crestron On
kind: action
command: "~XX454 1"
params: []
- id: extron_off
label: Extron Off
kind: action
command: "~XX455 0"
params: []
- id: extron_on
label: Extron On
kind: action
command: "~XX455 1"
params: []
- id: pj_link_off
label: PJ Link Off
kind: action
command: "~XX456 0"
params: []
- id: pj_link_on
label: PJ Link On
kind: action
command: "~XX456 1"
params: []
- id: amx_device_discovery_off
label: AMX Device Discovery Off
kind: action
command: "~XX457 0"
params: []
- id: amx_device_discovery_on
label: AMX Device Discovery On
kind: action
command: "~XX457 1"
params: []
- id: telnet_off
label: Telnet Off
kind: action
command: "~XX458 0"
params: []
- id: telnet_on
label: Telnet On
kind: action
command: "~XX458 1"
params: []
- id: http_off
label: HTTP Off
kind: action
command: "~XX459 0"
params: []
- id: http_on
label: HTTP On
kind: action
command: "~XX459 1"
params: []
- id: serial_number_query
label: Serial Number Query
kind: query
command: "~XX353"
params: []
- id: main_resolution_query
label: Main Resolution Query
kind: query
command: "~XX150 4"
params: []
- id: main_signal_format_query
label: Main Signal Format Query
kind: query
command: "~XX150 5"
params: []
- id: main_pixel_clock_query
label: Main Pixel Clock Query
kind: query
command: "~XX150 6"
params: []
- id: main_horz_refresh_query
label: Main Horz Refresh Query
kind: query
command: "~XX150 7"
params: []
- id: main_vert_refresh_query
label: Main Vert Refresh Query
kind: query
command: "~XX150 8"
params: []
- id: sub_resolution_query
label: Sub Resolution Query
kind: query
command: "~XX150 10"
params: []
- id: sub_signal_format_query
label: Sub Signal Format Query
kind: query
command: "~XX150 11"
params: []
- id: sub_pixel_clock_query
label: Sub Pixel Clock Query
kind: query
command: "~XX150 12"
params: []
- id: sub_horz_refresh_query
label: Sub Horz Refresh Query
kind: query
command: "~XX150 13"
params: []
- id: sub_vert_refresh_query
label: Sub Vert Refresh Query
kind: query
command: "~XX545 14"
params: []
- id: display_mode_query_info
label: Display Mode Info Query
kind: query
command: "~XX123"
params: []
- id: system_temperature_query
label: System Temperature Query
kind: query
command: "~XX150 18"
params: []
- id: color_depth_query
label: Color Depth Query
kind: query
command: "~XX156"
params: []
- id: color_format_query
label: Color Format Query
kind: query
command: "~XX157"
params: []
- id: projection_hours_query
label: Projection Hours Query
kind: query
command: "~XX108"
params: []
- id: fw_version_query
label: FW Version Query (Global)
kind: query
command: "~XX122"
params: []
- id: model_name_query
label: Model Name Query
kind: query
command: "~XX151"
params: []
# returns: Ok5 (Optoma WUXGA), Ok6 (Optoma UHD)
- id: software_version_query
label: Software Version Query
kind: query
command: "~XX122"
params: []
- id: lan_fw_version_query
label: LAN FW Version Query
kind: query
command: "~XX357"
params: []
- id: fan_speed_query
label: Fan Speed Query
kind: query
command: "~XX351 {1-4}"
params:
- name: fan
type: integer
description: "1=Fan1, 2=Fan2, 3=Fan3, 4=Fan4"
- id: system_temperature_direct_query
label: System Temperature Direct Query
kind: query
command: "~XX352"
params: []
- id: info_string_query
label: Info String Query
kind: query
command: "~XX150 1"
params: []
- id: native_resolution_query
label: Native Resolution Query
kind: query
command: "~XX150 2"
params: []
- id: main_source_info_query
label: Main Source Info Query
kind: query
command: "~XX150 3"
params: []
- id: main_resolution_info_query
label: Main Resolution Info Query
kind: query
command: "~XX150 4"
params: []
- id: main_signal_format_info_query
label: Main Signal Format Info Query
kind: query
command: "~XX150 5"
params: []
- id: main_pixel_clock_info_query
label: Main Pixel Clock Info Query
kind: query
command: "~XX150 6"
params: []
- id: main_horz_refresh_info_query
label: Main Horz Refresh Info Query
kind: query
command: "~XX150 7"
params: []
- id: main_vert_refresh_info_query
label: Main Vert Refresh Info Query
kind: query
command: "~XX150 8"
params: []
- id: sub_source_info_query
label: Sub Source Info Query
kind: query
command: "~XX150 9"
params: []
- id: sub_resolution_info_query
label: Sub Resolution Info Query
kind: query
command: "~XX150 10"
params: []
- id: sub_signal_format_info_query
label: Sub Signal Format Info Query
kind: query
command: "~XX150 11"
params: []
- id: sub_pixel_clock_info_query
label: Sub Pixel Clock Info Query
kind: query
command: "~XX150 12"
params: []
- id: sub_horz_refresh_info_query
label: Sub Horz Refresh Info Query
kind: query
command: "~XX150 13"
params: []
- id: sub_vert_refresh_info_query
label: Sub Vert Refresh Info Query
kind: query
command: "~XX150 14"
params: []
- id: light_source_mode_query
label: Light Source Mode Query
kind: query
command: "~XX150 15"
params: []
- id: standby_power_mode_query
label: Standby Power Mode Query
kind: query
command: "~XX150 16"
params: []
# returns: Ok0=Active, Ok1=Eco, Ok2=Eco (per regulatory), Ok3=Communications
# NOTE: source's Regulatory table maps ~XX150 16 to 0/Active, 1/Eco, 3/Communications.
# Other Useful Command table also lists Eco=Ok2 under same opcode.
# Same opcode (~XX150 17) used for DHCP Off = Ok0 (DHCP table) and Standby Off = Ok0.
- id: source_lock_off
label: Source Lock Off
kind: action
command: "~XX100 0"
params: []
- id: source_lock_on
label: Source Lock On
kind: action
command: "~XX100 1"
params: []
- id: filter_wheel_index
label: Filter Wheel Index
kind: action
command: "~XX528 {0000-9999}"
params:
- name: index
type: string
description: "0000..9999"
# read: ~XX530
- id: filter_wheel_index_query
label: Filter Wheel Index Query
kind: query
command: "~XX530"
params: []
- id: phosphor_wheel_index
label: Phosphor Wheel Index
kind: action
command: "~XX529 {0000-9999}"
params:
- name: index
type: string
description: "0000..9999"
# read: ~XX531
- id: phosphor_wheel_index_query
label: Phosphor Wheel Index Query
kind: query
command: "~XX531"
params: []
- id: output_3d_state_query
label: Output 3D State Query
kind: query
command: "~XX130"
params: []
# returns: Ok0=2D, Ok1=3D
- id: brightness_mode_query
label: Brightness Mode Query (Regulatory)
kind: query
command: "~XX150 20"
params: []
# NOTE: regulatory "Brightness Mode" row lists this row without explicit opcode;
# placeholder retained as UNRESOLVED-equivalent; existing brightness_mode action uses ~XX110.
# UNRESOLVED: source regulatory row "Brightness Mode" has no read command documented
# Remote Control Simulation commands (~XX140 family)
- id: rc_power
label: Remote Power
kind: action
command: "~XX140 1"
params: []
- id: rc_power_off
label: Remote Power Off
kind: action
command: "~XX140 2"
params: []
- id: rc_up
label: Remote Up
kind: action
command: "~XX140 10"
params: []
- id: rc_left
label: Remote Left
kind: action
command: "~XX140 11"
params: []
- id: rc_enter
label: Remote Enter
kind: action
command: "~XX140 12"
params: []
- id: rc_right
label: Remote Right
kind: action
command: "~XX140 13"
params: []
- id: rc_down
label: Remote Down
kind: action
command: "~XX140 14"
params: []
- id: rc_vkeystone_plus
label: Remote V Keystone +
kind: action
command: "~XX140 15"
params: []
- id: rc_vkeystone_minus
label: Remote V Keystone -
kind: action
command: "~XX140 16"
params: []
- id: rc_brightness
label: Remote Brightness
kind: action
command: "~XX140 19"
params: []
- id: rc_menu
label: Remote Menu
kind: action
command: "~XX140 20"
params: []
- id: rc_zoom
label: Remote Zoom
kind: action
command: "~XX140 21"
params: []
- id: rc_av_mute
label: Remote AV Mute
kind: action
command: "~XX140 24"
params: []
- id: rc_contrast
label: Remote Contrast
kind: action
command: "~XX140 28"
params: []
- id: rc_lens_shift
label: Remote Lens Shift
kind: action
command: "~XX140 31"
params: []
- id: rc_zoom_plus
label: Remote Zoom +
kind: action
command: "~XX140 32"
params: []
- id: rc_zoom_minus
label: Remote Zoom -
kind: action
command: "~XX140 33"
params: []
- id: rc_focus_plus
label: Remote Focus +
kind: action
command: "~XX140 34"
params: []
- id: rc_focus_minus
label: Remote Focus -
kind: action
command: "~XX140 35"
params: []
- id: rc_mode
label: Remote Mode
kind: action
command: "~XX140 36"
params: []
- id: rc_info
label: Remote Info
kind: action
command: "~XX140 40"
params: []
- id: rc_auto
label: Remote Auto (Re-sync)
kind: action
command: "~XX140 41"
params: []
- id: rc_input
label: Remote Input
kind: action
command: "~XX140 47"
params: []
- id: rc_digit_1
label: Remote 1
kind: action
command: "~XX140 51"
params: []
- id: rc_digit_2
label: Remote 2
kind: action
command: "~XX140 52"
params: []
- id: rc_digit_3
label: Remote 3
kind: action
command: "~XX140 53"
params: []
- id: rc_digit_4
label: Remote 4
kind: action
command: "~XX140 54"
params: []
- id: rc_digit_5
label: Remote 5
kind: action
command: "~XX140 55"
params: []
- id: rc_digit_6
label: Remote 6
kind: action
command: "~XX140 56"
params: []
- id: rc_digit_7
label: Remote 7
kind: action
command: "~XX140 57"
params: []
- id: rc_digit_8
label: Remote 8
kind: action
command: "~XX140 58"
params: []
- id: rc_digit_9
label: Remote 9
kind: action
command: "~XX140 59"
params: []
- id: rc_digit_0
label: Remote 0
kind: action
command: "~XX140 60"
params: []
- id: rc_gamma
label: Remote Gamma
kind: action
command: "~XX140 61"
params: []
- id: rc_pip
label: Remote PIP
kind: action
command: "~XX140 63"
params: []
- id: rc_lens_h_left
label: Remote Lens H Left
kind: action
command: "~XX140 64"
params: []
- id: rc_lens_h_right
label: Remote Lens H Right
kind: action
command: "~XX140 65"
params: []
- id: rc_lens_v_up
label: Remote Lens V Up
kind: action
command: "~XX140 66"
params: []
- id: rc_lens_v_down
label: Remote Lens V Down
kind: action
command: "~XX140 67"
params: []
- id: rc_hkeystone_plus
label: Remote H Keystone +
kind: action
command: "~XX140 68"
params: []
- id: rc_hkeystone_minus
label: Remote H Keystone -
kind: action
command: "~XX140 69"
params: []
- id: rc_hotkey_f1
label: Remote Hot Key F1
kind: action
command: "~XX140 70"
params: []
- id: rc_pattern
label: Remote Pattern
kind: action
command: "~XX140 73"
params: []
- id: rc_exit
label: Remote Exit
kind: action
command: "~XX140 74"
params: []
Feedbacks
- id: power_state
type: enum
values: [on, off]
command: "~XX124"
- id: av_mute_state
type: enum
values: [off, on]
command: "~XX355"
- id: display_mode_state
type: integer
command: "~XX123"
- id: aspect_ratio_state
type: enum
values: [4_3, 16_9, 16_10, lbx, native, auto]
command: "~XX127"
- id: projection_mode_state
type: enum
values: [front, rear, ceiling_top, rear_top]
command: "~XX129"
- id: color_temperature_state
type: enum
values: [standard, cool, warm]
command: "~XX128"
- id: standby_power_mode_state
type: enum
values: [active, eco, communications] # source maps ~XX150 16: Ok0=Active, Ok1=Eco, Ok3=Communications
command: "~XX150 16"
- id: dhcp_state
type: enum
values: [off, on]
command: "~XX150 17"
- id: model_name
type: enum
values: [optoma_wuxga, optoma_uhd]
command: "~XX151"
- id: main_source_state
type: integer
command: "~XX121"
- id: sub_source_state
type: integer
command: "~XX131"
- id: serial_port_baud_rate_state
type: enum
values: [9600, 14400, 19200, 38400, 57600, 115200]
command: "~XX153"
- id: lens_function_state
type: enum
values: [lock, unlock]
command: "~XX545 4"
- id: warp_blend_memory_state
type: enum
values: [off, user1, user2, user3]
command: "~XX137"
- id: warp_blend_pc_connection_state
type: enum
values: [no, yes]
command: "~XX132 3"
- id: ir_front_state
type: enum
values: [off, on]
command: "~XX542 1"
- id: ir_top_state
type: enum
values: [off, on]
command: "~XX542 2"
- id: system_update_notification_state
type: enum
values: [off, on]
command: "~XX158"
- id: output_3d_state
type: enum
values: [2d, 3d]
command: "~XX130"
- id: filter_wheel_index_state
type: integer
command: "~XX530"
- id: phosphor_wheel_index_state
type: integer
command: "~XX531"
Variables
- id: serial_number
command: "~XX353"
- id: fw_version
command: "~XX122"
- id: software_version
command: "~XX122"
- id: lan_fw_version
command: "~XX357"
- id: system_temperature
command: "~XX150 18"
- id: projection_hours
command: "~XX108"
- id: lan_ip_address
command: "~XX87 3"
- id: lan_mac_address
command: "~XX555"
- id: color_depth
command: "~XX156"
- id: color_format
command: "~XX157"
- id: main_resolution
command: "~XX150 4"
- id: main_signal_format
command: "~XX150 5"
- id: main_pixel_clock
command: "~XX150 6"
- id: main_horz_refresh
command: "~XX150 7"
- id: main_vert_refresh
command: "~XX150 8"
- id: sub_resolution
command: "~XX150 10"
- id: sub_signal_format
command: "~XX150 11"
- id: sub_pixel_clock
command: "~XX150 12"
- id: sub_horz_refresh
command: "~XX150 13"
- id: sub_vert_refresh
command: "~XX545 14"
- id: light_source_mode
command: "~XX150 15"
- id: filter_wheel_index
command: "~XX530"
- id: phosphor_wheel_index
command: "~XX531"
- id: fan_1_speed
command: "~XX351 1"
- id: fan_2_speed
command: "~XX351 2"
- id: fan_3_speed
command: "~XX351 3"
- id: fan_4_speed
command: "~XX351 4"
- id: projector_id
command: "~XX558"
- id: remote_code
command: "~XX350"
- id: wlan_ssid
command: "~XX451 3"
- id: wlan_ip_address
command: "~XX451 2"
- id: wlan_start_ip
command: "~XX451 5"
- id: wlan_end_ip
command: "~XX451 6"
- id: native_resolution
command: "~XX150 2"
- id: info_string
command: "~XX150 1"
- id: brightness_value
command: "~XX125"
- id: contrast_value
command: "~XX126"
- id: threed_frame_delay
command: "~XX233"
- id: main_source_info
command: "~XX150 3"
- id: sub_source_info
command: "~XX150 9"
- id: main_resolution_info
command: "~XX150 4"
- id: sub_resolution_info
command: "~XX150 10"
- id: system_temperature_direct
command: "~XX352"
Events
# Source documents "System Auto Response Format": INFO{n}
# Device sends unsolicited INFO strings for state changes and errors.
- id: standby_mode_state
source: "INFO"
values:
- "0": "Standby Mode"
- "1": "Warming up"
- "2": "Cooling Down"
- "3": "Out of Range"
- "4": "Lamp Fail (LED Fail)"
- "5": "Thermal Switch Error"
- "6": "Fan Lock"
- "7": "Over Temperature"
- "8": "Lamp Hours Running Out"
- "9": "Cover Open"
- "10": "Lamp Ignite Fail"
- "11": "Format Board Power On Fail"
- "12": "Color Wheel Unexpected Stop"
- "13": "Over Temperature"
- "14": "FAN 1 Lock"
- "15": "FAN 2 Lock"
- "16": "FAN 3 Lock"
- "17": "FAN 4 Lock"
- "18": "FAN 5 Lock"
- "19": "LAN fail then restart"
- "20": "LD lower than 60%"
- "21": "LD NTC (1) Over Temperature"
- "22": "LD NTC (2) Over Temperature"
- "23": "High Ambient Temperature"
- "24": "System Ready"
Macros
# UNRESOLVED: source does not document multi-step sequences
Safety
confirmation_required_for:
- reset_to_default # ~XX112 1: source lists Cancel/Yes
- reset_osd # ~XX546 1: source lists Cancel/Yes
- system_update # ~XX168 9: source lists Cancel/Yes
- color_match_reset # ~XX215 1: source lists Cancel/Yes
- rgb_gain_bias_reset # ~XX517 1: source lists Cancel/Yes
- lens_memory_reset # ~XX361 1: Yes/No
- lens_calibration # ~XX525: Yes/NO
interlocks: []
# UNRESOLVED: source has no explicit interlock procedures. NOTE 1 only describes freeze-screen release.
Notes
Source: Optoma RS232 Protocol Function List (refined excerpt) for GT4000UHD. Filename suffix "_ip" is misleading; refined source contains no IP/HTTP wire protocol details.
Protocol framing:
- Frame =
~(0x7E) + 2-digit projector ID + 3-digit command + space + variable + CR (0x0D). - ID
00= broadcast (all projectors). - Write response:
P(pass) orF(fail). - Read response:
O k+ variable, orF. - Unsolicited auto-responses use
INFO{n}.
Baud rate: source default 19200, range 9600-115200. Projector supports querying active rate via ~XX153.
Serial port path: RS232 vs HDBaseT selectable via ~XX557.
IP control: source enables Telnet (~XX458) and HTTP (~XX459) toggles but does not specify IP port numbers, HTTP base URL, or auth credentials — all marked UNRESOLVED. Protocols tcp and http listed in Transport by inference only.
Security: ~XX78 accepts 4-digit passcode; ~XX77 accepts MMDDHH timestamp (RS232 only).
Source-reuse of opcode ~XX150 16: same query maps to Standby Power Mode in Power Settings table AND in Regulatory table with different Ok-code → meaning cross-reference (Regulatory: Ok0=Active, Ok1=Eco, Ok3=Communications; Other Useful Command table also lists Eco=Ok2 under same opcode — source internal inconsistency preserved as-is).
Source-reuse of opcode ~XX150 17: DHCP On/Off in LAN table AND Standby Power "Off" in Regulatory table.
EDID/HDMI settings (HDMI 1/2/HDBaseT EDID 1.4 vs 2.0, EDID Reminder) listed in OSD but no RS232 write/read commands documented in source — omitted from Actions.
Remote Control Simulation commands (~XX140 family) enumerated separately as discrete actions.
Output 3D state via ~XX130 (Ok0=2D, Ok1=3D) — added as Feedback + dedicated query action output_3d_state_query.
Filter Wheel Index (~XX528 write / ~XX530 read) and Phosphor Wheel Index (~XX529 write / ~XX531 read) present in source as discrete rows under "Other Useful Command".
Light Sensor row in source has three distinct sub-rows: Default (~XX552 0), Manual (~XX552 2), Calibration (~XX552 2). Source uses same opcode for Manual and Calibration rows — preserved as separate actions per source-row granularity.
Provenance
source_domains:
- region-resource.optoma.com
source_urls:
- https://region-resource.optoma.com/products/import/Documents/fcc27c8d-3ab3-462f-a7f3-ee35633fdb8c.pdf
retrieved_at: 2026-09-15T03:27:32.169Z
last_checked_at: 2026-09-17T22:19:55.430Z
Verification Summary
verdict: verified
checked_at: 2026-09-17T22:19:55.430Z
matched_actions: 313
action_count: 313
confidence: medium
summary: "All 313 spec action units have literal ~XX opcode matches in the source; transport values verbatim; source catalogue essentially fully represented. (17 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "TCP port for Telnet/HTTP not stated in source"
- "authentication procedure not described"
- "TCP port for Telnet not stated in source"
- "TCP port not stated in source"
- "HTTP base URL not stated in source"
- "source regulatory row \"Brightness Mode\" has no read command documented"
- "source does not document multi-step sequences"
- "source has no explicit interlock procedures. NOTE 1 only describes freeze-screen release."
- "HTTP base URL/path not stated in source"
- "authentication credentials not described in source"
- "voltage/current/power specs not stated in source"
- "firmware version compatibility range not stated in source"
- "EDID settings present in OSD menu but no RS232 commands documented"
- "Network Reset, WLAN Subnet Mask, LAN Subnet Mask/Gateway/DNS apply commands not documented"
- "Brightness Mode Regulatory row has no explicit read opcode in source"
- "Power Level Regulatory row has no explicit read opcode in source"
- "F-MCU/S-MCU/F-Image/Formatter versions listed in source but no read opcodes documented"
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0