AI4AVSummary
The Onkyo HT-L05 is an AV receiver controllable via the Integra Serial Communication Protocol (ISCP) over TCP/IP (eISCP) and over RS-232C. The protocol uses 3-character command codes with variable-length parameters. This spec covers the eISCP over Ethernet transport layer, the RS-232C serial transport, and the core receiver command set documented in the ISCP protocol specification v1.15, including main-zone, Zone2, Zone3 and Zone4 command groups plus RI-bus relay commands.
Transport
# Source documents both eISCP over Ethernet (TCP) and ISCP over RS-232C.
protocols:
- tcp
- serial
addressing:
port: 60128
# UNRESOLVED: configurable range 49152-65535 per source; default is 60128
serial:
baud_rate: 9600
data_bits: 8
parity: none
stop_bits: 1
flow_control: none
# 3-wire RS-232C, DB9 female (pin 2 TX, pin 3 RX, pin 5 GND), straight-thru cable
auth:
type: none # inferred: no auth procedure in source
Traits
- powerable # inferred from PWR power on/off/standby commands
- routable # inferred from SLI input selector commands
- queryable # inferred from QSTN query parameter on multiple commands
- levelable # inferred from MVL master volume commands
Actions
# ===================================================================
# MAIN ZONE - Power / Muting
# ===================================================================
- id: power_standby
label: Power Standby
kind: action
command: PWR00
description: Sets system to standby
params: []
- id: power_on
label: Power On
kind: action
command: PWR01
description: Sets system on
params: []
- id: mute_off
label: Mute Off
kind: action
command: AMT00
description: Sets audio muting off
params: []
- id: mute_on
label: Mute On
kind: action
command: AMT01
description: Sets audio muting on
params: []
- id: mute_toggle
label: Mute Toggle
kind: action
command: AMTTG
description: Sets audio muting wrap-around
params: []
# ===================================================================
# MAIN ZONE - Speaker A/B / Layout (model-conditional)
# ===================================================================
- id: speaker_a_off
label: Speaker A Off
kind: action
command: SPA00
description: Sets Speaker A Off (SPA=MAIN A on some models, Front A on others)
params: []
- id: speaker_a_on
label: Speaker A On
kind: action
command: SPA01
description: Sets Speaker A On
params: []
- id: speaker_a_up
label: Speaker A Wrap-Around Up
kind: action
command: SPAUP
description: Sets Speaker A switch wrap-around up
params: []
- id: speaker_b_off
label: Speaker B Off
kind: action
command: SPB00
description: Sets Speaker B Off (SPB=MAIN B on some models, Front B on others)
params: []
- id: speaker_b_on
label: Speaker B On
kind: action
command: SPB01
description: Sets Speaker B On
params: []
- id: speaker_b_up
label: Speaker B Wrap-Around Up
kind: action
command: SPBUP
description: Sets Speaker B switch wrap-around up
params: []
- id: speaker_layout_set
label: Set Speaker Layout
kind: action
command: SPL{layout}
description: "Sets speaker layout: SB=SurrBack, FH=Front High (or SurrBack+Front High), FW=Front Wide (or SurrBack+Front Wide)"
params:
- name: layout
type: string
description: "SB, FH, FW, or UP (wrap-around)"
# ===================================================================
# MAIN ZONE - Master Volume
# ===================================================================
- id: master_volume_set
label: Set Master Volume
kind: action
command: MVL{level}
description: Sets volume level (hex 00-64, decimal 0-100)
params:
- name: level
type: string
description: Volume level in hex (00-64 for 0-100)
- id: master_volume_up
label: Volume Up
kind: action
command: MVLUP
description: Sets volume level up
params: []
- id: master_volume_down
label: Volume Down
kind: action
command: MVLDOWN
description: Sets volume level down
params: []
# ===================================================================
# MAIN ZONE - Tone (Front / Front Wide / Front High / Center / Surround / SurrBack / Subwoofer)
# ===================================================================
- id: tone_front_bass_up
label: Front Bass Up
kind: action
command: TFRBUP
description: Sets Front Bass up (2 step)
params: []
- id: tone_front_bass_down
label: Front Bass Down
kind: action
command: TFRBDOWN
description: Sets Front Bass down (2 step)
params: []
- id: tone_front_treble_up
label: Front Treble Up
kind: action
command: TFRTUP
description: Sets Front Treble up (2 step)
params: []
- id: tone_front_treble_down
label: Front Treble Down
kind: action
command: TFRTDOWN
description: Sets Front Treble down (2 step)
params: []
- id: tone_front_wide_bass_set
label: Set Front Wide Bass
kind: action
command: TFWB{xx}
description: "Front Wide Bass (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Bass level code
- id: tone_front_wide_treble_set
label: Set Front Wide Treble
kind: action
command: TFWT{xx}
description: "Front Wide Treble (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Treble level code
- id: tone_front_wide_bass_up
label: Front Wide Bass Up
kind: action
command: TFWBUP
description: Sets Front Wide Bass up (2 step)
params: []
- id: tone_front_wide_bass_down
label: Front Wide Bass Down
kind: action
command: TFWBDOWN
description: Sets Front Wide Bass down (2 step)
params: []
- id: tone_front_wide_treble_up
label: Front Wide Treble Up
kind: action
command: TFWTUP
description: Sets Front Wide Treble up (2 step)
params: []
- id: tone_front_wide_treble_down
label: Front Wide Treble Down
kind: action
command: TFWTDOWN
description: Sets Front Wide Treble down (2 step)
params: []
- id: tone_front_high_bass_set
label: Set Front High Bass
kind: action
command: TFHB{xx}
description: "Front High Bass (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Bass level code
- id: tone_front_high_treble_set
label: Set Front High Treble
kind: action
command: TFHT{xx}
description: "Front High Treble (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Treble level code
- id: tone_front_high_bass_up
label: Front High Bass Up
kind: action
command: TFHBUP
description: Sets Front High Bass up (2 step)
params: []
- id: tone_front_high_bass_down
label: Front High Bass Down
kind: action
command: TFHBDOWN
description: Sets Front High Bass down (2 step)
params: []
- id: tone_front_high_treble_up
label: Front High Treble Up
kind: action
command: TFHTUP
description: Sets Front High Treble up (2 step)
params: []
- id: tone_front_high_treble_down
label: Front High Treble Down
kind: action
command: TFHTDOWN
description: Sets Front High Treble down (2 step)
params: []
- id: tone_center_bass_set
label: Set Center Bass
kind: action
command: TCTB{xx}
description: "Center Bass (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Bass level code
- id: tone_center_treble_set
label: Set Center Treble
kind: action
command: TCTT{xx}
description: "Center Treble (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Treble level code
- id: tone_center_bass_up
label: Center Bass Up
kind: action
command: TCTBUP
description: Sets Center Bass up (2 step)
params: []
- id: tone_center_bass_down
label: Center Bass Down
kind: action
command: TCTBDOWN
description: Sets Center Bass down (2 step)
params: []
- id: tone_center_treble_up
label: Center Treble Up
kind: action
command: TCTTUP
description: Sets Center Treble up (2 step)
params: []
- id: tone_center_treble_down
label: Center Treble Down
kind: action
command: TCTTDOWN
description: Sets Center Treble down (2 step)
params: []
- id: tone_surround_bass_set
label: Set Surround Bass
kind: action
command: TSRB{xx}
description: "Surround Bass (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Bass level code
- id: tone_surround_treble_set
label: Set Surround Treble
kind: action
command: TSRT{xx}
description: "Surround Treble (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Treble level code
- id: tone_surround_bass_up
label: Surround Bass Up
kind: action
command: TSRBUP
description: Sets Surround Bass up (2 step)
params: []
- id: tone_surround_bass_down
label: Surround Bass Down
kind: action
command: TSRBDOWN
description: Sets Surround Bass down (2 step)
params: []
- id: tone_surround_treble_up
label: Surround Treble Up
kind: action
command: TSRTUP
description: Sets Surround Treble up (2 step)
params: []
- id: tone_surround_treble_down
label: Surround Treble Down
kind: action
command: TSRTDOWN
description: Sets Surround Treble down (2 step)
params: []
- id: tone_surround_back_bass_set
label: Set Surround Back Bass
kind: action
command: TSBB{xx}
description: "Surround Back Bass (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Bass level code
- id: tone_surround_back_treble_set
label: Set Surround Back Treble
kind: action
command: TSBT{xx}
description: "Surround Back Treble (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Treble level code
- id: tone_surround_back_bass_up
label: Surround Back Bass Up
kind: action
command: TSBBUP
description: Sets Surround Back Bass up (2 step)
params: []
- id: tone_surround_back_bass_down
label: Surround Back Bass Down
kind: action
command: TSBBDOWN
description: Sets Surround Back Bass down (2 step)
params: []
- id: tone_surround_back_treble_up
label: Surround Back Treble Up
kind: action
command: TSBTUP
description: Sets Surround Back Treble up (2 step)
params: []
- id: tone_surround_back_treble_down
label: Surround Back Treble Down
kind: action
command: TSBTDOWN
description: Sets Surround Back Treble down (2 step)
params: []
- id: tone_subwoofer_bass_set
label: Set Subwoofer Tone
kind: action
command: TSWB{xx}
description: "Subwoofer Bass (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Bass level code
- id: tone_subwoofer_bass_up
label: Subwoofer Bass Up
kind: action
command: TSWBUP
description: Sets Subwoofer Bass up (2 step)
params: []
- id: tone_subwoofer_bass_down
label: Subwoofer Bass Down
kind: action
command: TSWBDOWN
description: Sets Subwoofer Bass down (2 step)
params: []
# ===================================================================
# MAIN ZONE - Sleep / Speaker Calibration
# ===================================================================
- id: sleep_set
label: Set Sleep Timer
kind: action
command: SLP{time}
description: Sets sleep timer (hex 01-5A for 1-90 min), OFF to disable
params:
- name: time
type: string
description: "Sleep time in hex (01-5A for 1-90min), OFF to disable, UP for wrap-around"
- id: speaker_calibration_test
label: Speaker Calibration Test
kind: action
command: SLCTEST
description: Speaker level calibration test tone key
params: []
- id: speaker_calibration_ch_select
label: Speaker Calibration CH Select
kind: action
command: SLCCHSEL
description: Channel select during calibration
params: []
- id: speaker_calibration_level_up
label: Speaker Calibration Level Up
kind: action
command: SLCUP
description: Level up during calibration
params: []
- id: speaker_calibration_level_down
label: Speaker Calibration Level Down
kind: action
command: SLCDOWN
description: Level down during calibration
params: []
# ===================================================================
# MAIN ZONE - Display / Dimmer
# ===================================================================
- id: display_info_program
label: Display Program Format
kind: action
command: DIF00
description: "Display Information: program format (temporary display)"
params: []
- id: display_info_digital_input
label: Display Digital Input Position
kind: action
command: DIF01
description: "Display Information: digital input position (temporary display)"
params: []
- id: display_info_digital_format
label: Display Digital Format
kind: action
command: DIF02
description: "Display Information: digital format (temporary display)"
params: []
- id: display_info_bass
label: Display Bass Level
kind: action
command: DIF03
description: "Display Information: bass level (temporary display)"
params: []
- id: display_info_treble
label: Display Treble Level
kind: action
command: DIF04
description: "Display Information: treble level (temporary display)"
params: []
- id: display_mode_set
label: Set Display Mode
kind: action
command: DIF{mode}
description: Sets display mode
params:
- name: mode
type: string
description: "00=Selector+Volume, 01=Selector+Listening Mode, TG=wrap-around"
- id: dimmer_set
label: Set Dimmer Level
kind: action
command: DIM{level}
description: Sets front panel dimmer level
params:
- name: level
type: string
description: "Dimmer level. 00=Bright, 01=Dim, 02=Dark, 03=Shut-Off, 08=Bright & LED OFF, DIM=wrap-around"
# ===================================================================
# MAIN ZONE - OSD Setup Operation
# ===================================================================
- id: osd_menu
label: OSD Menu
kind: action
command: OSDMENU
description: Opens on-screen display menu
params: []
- id: osd_up
label: OSD Up
kind: action
command: OSDUP
description: OSD navigation up
params: []
- id: osd_down
label: OSD Down
kind: action
command: OSDDOWN
description: OSD navigation down
params: []
- id: osd_right
label: OSD Right
kind: action
command: OSDRIGHT
description: OSD navigation right
params: []
- id: osd_left
label: OSD Left
kind: action
command: OSDLEFT
description: OSD navigation left
params: []
- id: osd_enter
label: OSD Enter
kind: action
command: OSDENTER
description: OSD enter/select
params: []
- id: osd_exit
label: OSD Exit
kind: action
command: OSDEXIT
description: OSD exit
params: []
- id: osd_audio
label: OSD Audio Adjust
kind: action
command: OSDAUDIO
description: Audio adjust key
params: []
- id: osd_video
label: OSD Video Adjust
kind: action
command: OSDVIDEO
description: Video adjust key
params: []
# ===================================================================
# MAIN ZONE - Memory Setup
# ===================================================================
- id: memory_store
label: Memory Store
kind: action
command: MEMSTR
description: Stores memory
params: []
- id: memory_recall
label: Memory Recall
kind: action
command: MEMRCL
description: Recalls memory
params: []
- id: memory_lock
label: Memory Lock
kind: action
command: MEMLOCK
description: Locks memory
params: []
- id: memory_unlock
label: Memory Unlock
kind: action
command: MEMUNLK
description: Unlocks memory
params: []
# ===================================================================
# MAIN ZONE - Input / Record Output / Audio Selectors
# ===================================================================
- id: select_input
label: Select Input
kind: action
command: SLI{input}
description: Selects input source
params:
- name: input
type: string
description: >
Input code in hex. Known values: 00=VCR/DVR, 01=CBL/SAT,
02=GAME/TV, 03=AUX1, 04=AUX2, 05=VIDEO6, 06=VIDEO7,
10=DVD, 20=TAPE, 21=TAPE2, 22=PHONO, 23=CD, 24=FM,
25=AM, 26=TUNER, 27=MUSIC SERVER, 28=INTERNET RADIO,
29=USB, 2A=USB Rear, 30=MULTI CH, 31=XM, 32=SIRIUS,
40=Universal PORT
- id: input_up
label: Input Selector Up
kind: action
command: SLIUP
description: Sets selector position wrap-around up
params: []
- id: input_down
label: Input Selector Down
kind: action
command: SLIDOWN
description: Sets selector position wrap-around down
params: []
- id: select_audio
label: Select Audio Input
kind: action
command: SLA{input}
description: Selects audio input source
params:
- name: input
type: string
description: >
Audio input code. 00=AUTO, 01=MULTI-CHANNEL, 02=ANALOG,
03=iLINK, 04=HDMI, 05=COAX/OPT, 06=BALANCE
- id: recout_select
label: Select Record Output
kind: action
command: SLR{input}
description: Selects record output source
params:
- name: input
type: string
description: >
Same input codes as SLI. 7F=OFF, 80=SOURCE
# ===================================================================
# MAIN ZONE - Listening Mode / Late Night / Surround filters
# ===================================================================
- id: listening_mode_set
label: Set Listening Mode
kind: action
command: LMD{mode}
description: Sets listening mode
params:
- name: mode
type: string
description: >
Mode code in hex. Common values: 00=STEREO, 01=DIRECT,
02=SURROUND, 03=FILM, 04=THX, 05=ACTION, 06=MUSICAL,
07=MONO MOVIE, 08=ORCHESTRA, 09=UNPLUGGED, 0A=STUDIO-MIX,
0B=TV LOGIC, 0C=ALL CH STEREO, 0D=THEATER-DIMENSIONAL,
0E=ENHANCED 7, 0F=MONO, 11=PURE AUDIO, 12=MULTIPLEX,
13=FULL MONO, 14=DOLBY VIRTUAL, 15=DTS Surround Sensation,
16=Audyssey DSX, 40=5.1ch/Straight Decode, 41=Dolby EX/DTS ES,
42=THX Cinema, 43=THX Surround EX, 44=THX Music, 45=THX Games,
50-52=U2/S2 Cinema/Music/Games, 80=PLII/PLIIx Movie,
81=PLII/PLIIx Music, 82=Neo:6 Cinema, 83=Neo:6 Music,
84=PLII/PLIIx THX Cinema, 85=Neo:6 THX Cinema, 86=PLII/PLIIx Game,
87=Neural Surr, 88=Neural THX/Neural Surround, 89-8F=THX Games/Music/Cinema variants,
90=PLIIz Height, 91-93=Neo:6/Neural Sensation/Digital Music,
94-99=PLIIz Height + THX variants, A0-A7=PLIIx/Neo:6/Neural + Audyssey DSX.
Also MOVIE/MUSIC/GAME wrap-around
- id: listening_mode_up
label: Listening Mode Up
kind: action
command: LMDUP
description: Sets listening mode wrap-around up
params: []
- id: listening_mode_down
label: Listening Mode Down
kind: action
command: LMDDOWN
description: Sets listening mode wrap-around down
params: []
- id: late_night_set
label: Set Late Night Mode
kind: action
command: LTN{level}
description: Sets late night compression level
params:
- name: level
type: string
description: "00=Off, 01=Low (Dolby Digital)/On (TrueHD), 02=High (Dolby Digital), 03=Auto (TrueHD), UP=wrap-around"
- id: reeq_set
label: Set Re-EQ / Academy / Cinema Filter
kind: action
command: RAS{level}
description: "Re-EQ/Academy Filter (older models: 00=Both Off,01=Re-EQ On,02=Academy On). Re-EQ only (00=Off,01=On). Cinema Filter (00=Off,01=On). UP=wrap-around"
params:
- name: level
type: string
description: "00/01/02/UP depending on model generation"
- id: audyssey_multeq_set
label: Set Audyssey 2EQ/MultEQ/MultEQ XT
kind: action
command: ADY{level}
description: "00=Off, 01=On, UP=wrap-around"
params:
- name: level
type: string
description: "00, 01, or UP"
- id: audyssey_dynamic_eq_set
label: Set Audyssey Dynamic EQ
kind: action
command: ADQ{level}
description: "00=Off, 01=On, UP=wrap-around"
params:
- name: level
type: string
description: "00, 01, or UP"
- id: audyssey_dynamic_volume_set
label: Set Audyssey Dynamic Volume
kind: action
command: ADV{level}
description: "00=Off, 01=Light, 02=Medium, 03=Heavy, UP=wrap-around"
params:
- name: level
type: string
description: "00, 01, 02, 03, or UP"
- id: dolby_volume_set
label: Set Dolby Volume
kind: action
command: DVL{level}
description: "00=Off, 01=Low, 02=Mid, 03=High, UP=wrap-around"
params:
- name: level
type: string
description: "00, 01, 02, 03, or UP"
- id: music_optimizer_set
label: Set Music Optimizer
kind: action
command: MOT{level}
description: "00=Off, 01=On, UP=wrap-around"
params:
- name: level
type: string
description: "00, 01, or UP"
# ===================================================================
# MAIN ZONE - Video Output (model-conditional)
# ===================================================================
- id: video_output_select
label: Video Output Selector (Japanese Model Only)
kind: action
command: VOS{mode}
description: "00=D4, 01=Component"
params:
- name: mode
type: string
description: "00 or 01 (Japanese model only)"
- id: hdmi_output_select
label: HDMI Output Select
kind: action
command: HDO{mode}
description: Selects HDMI output routing
params:
- name: mode
type: string
description: "00=Analog only, 01=HDMI Main, 02=HDMI Sub, 03=Both, 04=Both(Main), 05=Both(Sub), UP=wrap-around"
- id: resolution_set
label: Set Monitor Out Resolution
kind: action
command: RES{mode}
description: Sets monitor output resolution
params:
- name: mode
type: string
description: "00=Through, 01=Auto(HDMI), 02=480p, 03=720p, 04=1080i, 05=1080p(HDMI), 06=Source, 07=1080p/24fs(HDMI), UP=wrap-around"
- id: isf_mode_set
label: Set ISF Mode
kind: action
command: ISF{mode}
description: "00=Custom, 01=Day, 02=Night, UP=wrap-around"
params:
- name: mode
type: string
description: "00, 01, 02, or UP"
# ===================================================================
# MAIN ZONE - 12V Triggers
# ===================================================================
- id: trigger_a_on
label: 12V Trigger A On
kind: action
command: TGA01
description: Sets 12V Trigger A On
params: []
- id: trigger_a_off
label: 12V Trigger A Off
kind: action
command: TGA00
description: Sets 12V Trigger A Off
params: []
- id: trigger_b_on
label: 12V Trigger B On
kind: action
command: TGB01
description: Sets 12V Trigger B On
params: []
- id: trigger_b_off
label: 12V Trigger B Off
kind: action
command: TGB00
description: Sets 12V Trigger B Off
params: []
- id: trigger_c_on
label: 12V Trigger C On
kind: action
command: TGC01
description: Sets 12V Trigger C On
params: []
- id: trigger_c_off
label: 12V Trigger C Off
kind: action
command: TGC00
description: Sets 12V Trigger C Off
params: []
# ===================================================================
# MAIN ZONE - Tuner (Tuner Pack Model Only)
# ===================================================================
- id: tuning_set
label: Set Tuning Frequency
kind: action
command: TUN{freq}
description: "Directly tunes frequency (FM nnn.nn MHz / AM nnnnn kHz / XM nnnnn ch; put 0 in first two digits at XM)"
params:
- name: freq
type: string
description: Frequency value as 5-digit string
- id: tuning_up
label: Tuning Up
kind: action
command: TUNUP
description: Sets tuning frequency wrap-around up
params: []
- id: tuning_down
label: Tuning Down
kind: action
command: TUNDOWN
description: Sets tuning frequency wrap-around down
params: []
- id: preset_set
label: Set Preset Number
kind: action
command: PRS{preset}
description: "Sets preset number (01-28 hex for 1-40, or 01-1E hex for 1-30 depending on model)"
params:
- name: preset
type: string
description: Preset number in hex
- id: preset_up
label: Preset Up
kind: action
command: PRSUP
description: Sets preset number wrap-around up
params: []
- id: preset_down
label: Preset Down
kind: action
command: PRSDOWN
description: Sets preset number wrap-around down
params: []
- id: preset_memory
label: Preset Memory
kind: action
command: PRM{preset}
description: "Stores preset (01-28 hex for 1-40, or 01-1E hex for 1-30)"
params:
- name: preset
type: string
description: Preset number in hex
- id: rds_info_select
label: Select RDS Information
kind: action
command: RDS{mode}
description: "00=RT Information, 01=PTY Information, 02=TP Information, UP=wrap-around (RDS Model Only)"
params:
- name: mode
type: string
description: "00, 01, 02, or UP"
- id: pty_scan_set
label: Set PTY Scan Number
kind: action
command: PTS{no}
description: "Sets PTY No 0-30 (00-1E hex) (RDS Model Only)"
params:
- name: "no"
type: string
description: PTY number in hex
- id: pty_scan_finish
label: Finish PTY Scan
kind: action
command: PTSENTER
description: Finishes PTY scan
params: []
- id: tp_scan_start
label: Start TP Scan
kind: action
command: TPS
description: Starts TP scan (no parameter) (RDS Model Only)
params: []
- id: tp_scan_finish
label: Finish TP Scan
kind: action
command: TPSENTER
description: Finishes TP scan
params: []
# ===================================================================
# MAIN ZONE - XM (XM Model Only)
# ===================================================================
- id: xm_channel_set
label: Set XM Channel
kind: action
command: XCH{no}
description: "Sets XM channel 000-255 (XM Model Only)"
params:
- name: "no"
type: string
description: Channel number 000-255
- id: xm_channel_up
label: XM Channel Up
kind: action
command: XCHUP
description: Sets XM channel wrap-around up
params: []
- id: xm_channel_down
label: XM Channel Down
kind: action
command: XCHDOWN
description: Sets XM channel wrap-around down
params: []
- id: xm_category_up
label: XM Category Up
kind: action
command: XCTUP
description: Sets XM category wrap-around up
params: []
- id: xm_category_down
label: XM Category Down
kind: action
command: XCTDOWN
description: Sets XM category wrap-around down
params: []
# ===================================================================
# MAIN ZONE - SIRIUS (SIRIUS Model Only)
# ===================================================================
- id: sirius_channel_set
label: Set SIRIUS Channel
kind: action
command: SCH{no}
description: "Sets SIRIUS channel 000-255 (SIRIUS Model Only)"
params:
- name: "no"
type: string
description: Channel number 000-255
- id: sirius_channel_up
label: SIRIUS Channel Up
kind: action
command: SCHUP
description: Sets SIRIUS channel wrap-around up
params: []
- id: sirius_channel_down
label: SIRIUS Channel Down
kind: action
command: SCHDOWN
description: Sets SIRIUS channel wrap-around down
params: []
- id: sirius_category_up
label: SIRIUS Category Up
kind: action
command: SCTUP
description: Sets SIRIUS category wrap-around up
params: []
- id: sirius_category_down
label: SIRIUS Category Down
kind: action
command: SCTDOWN
description: Sets SIRIUS category wrap-around down
params: []
- id: sirius_parental_lock
label: SIRIUS Parental Lock
kind: action
command: SLK{password}
description: "Sets SIRIUS lock password (4 digits) (SIRIUS Model Only)"
params:
- name: password
type: string
description: 4-digit lock password
# ===================================================================
# MAIN ZONE - HD Radio (HD Radio Model Only)
# ===================================================================
- id: hd_radio_program_set
label: Set HD Radio Channel Program
kind: action
command: HPR{no}
description: "Sets HD Radio channel program 01-08 (HD Radio Model Only)"
params:
- name: "no"
type: string
description: Program number 01-08
- id: hd_radio_blend_set
label: Set HD Radio Blend Mode
kind: action
command: HBL{mode}
description: "00=Auto, 01=Analog (HD Radio Model Only)"
params:
- name: mode
type: string
description: "00 or 01"
# ===================================================================
# MAIN ZONE - Network / USB Operation (Network Model Only)
# ===================================================================
- id: network_play
label: Network Play
kind: action
command: NTCPLAY
description: Network/USB play key
params: []
- id: network_stop
label: Network Stop
kind: action
command: NTCSTOP
description: Network/USB stop key
params: []
- id: network_pause
label: Network Pause
kind: action
command: NTCPAUSE
description: Network/USB pause key
params: []
- id: network_track_up
label: Network Track Up
kind: action
command: NTCTRUP
description: Network/USB track up
params: []
- id: network_track_down
label: Network Track Down
kind: action
command: NTCTRDN
description: Network/USB track down
params: []
- id: network_ff
label: Network FF
kind: action
command: NTCFF
description: "Network/USB FF key (CONTINUOUS - must be sent repeatedly, no more than 100ms between codes)"
params: []
- id: network_rew
label: Network REW
kind: action
command: NTCREW
description: "Network/USB REW key (CONTINUOUS - must be sent repeatedly, no more than 100ms between codes)"
params: []
- id: network_repeat
label: Network Repeat
kind: action
command: NTCREPEAT
description: Network/USB repeat key
params: []
- id: network_random
label: Network Random
kind: action
command: NTCRANDOM
description: Network/USB random key
params: []
- id: network_display
label: Network Display
kind: action
command: NTCDISPLAY
description: Network/USB display key
params: []
- id: network_album
label: Network Album Key
kind: action
command: NTCALBUM
description: Network/USB album key
params: []
- id: network_artist
label: Network Artist Key
kind: action
command: NTCARTIST
description: Network/USB artist key
params: []
- id: network_genre
label: Network Genre Key
kind: action
command: NTCGENRE
description: Network/USB genre key
params: []
- id: network_playlist
label: Network Playlist Key
kind: action
command: NTCPLAYLIST
description: Network/USB playlist key
params: []
- id: network_right
label: Network Right Key
kind: action
command: NTCRIGHT
description: Network/USB right key
params: []
- id: network_left
label: Network Left Key
kind: action
command: NTCLEFT
description: Network/USB left key
params: []
- id: network_up
label: Network Up Key
kind: action
command: NTCUP
description: Network/USB up key
params: []
- id: network_down
label: Network Down Key
kind: action
command: NTCDOWN
description: Network/USB down key
params: []
- id: network_select
label: Network Select Key
kind: action
command: NTCSELECT
description: Network/USB select key
params: []
- id: network_key_0
label: Network 0 Key
kind: action
command: NTC0
description: Network/USB 0 key
params: []
- id: network_key_1
label: Network 1 Key
kind: action
command: NTC1
description: Network/USB 1 key
params: []
- id: network_key_2
label: Network 2 Key
kind: action
command: NTC2
description: Network/USB 2 key
params: []
- id: network_key_3
label: Network 3 Key
kind: action
command: NTC3
description: Network/USB 3 key
params: []
- id: network_key_4
label: Network 4 Key
kind: action
command: NTC4
description: Network/USB 4 key
params: []
- id: network_key_5
label: Network 5 Key
kind: action
command: NTC5
description: Network/USB 5 key
params: []
- id: network_key_6
label: Network 6 Key
kind: action
command: NTC6
description: Network/USB 6 key
params: []
- id: network_key_7
label: Network 7 Key
kind: action
command: NTC7
description: Network/USB 7 key
params: []
- id: network_key_8
label: Network 8 Key
kind: action
command: NTC8
description: Network/USB 8 key
params: []
- id: network_key_9
label: Network 9 Key
kind: action
command: NTC9
description: Network/USB 9 key
params: []
- id: network_delete
label: Network Delete Key
kind: action
command: NTCDELETE
description: Network/USB delete key
params: []
- id: network_caps
label: Network Caps Key
kind: action
command: NTCCAPS
description: Network/USB caps key
params: []
- id: network_location
label: Network Location Key
kind: action
command: NTCLOCATION
description: Network/USB location key
params: []
- id: network_language
label: Network Language Key
kind: action
command: NTCLANGUAGE
description: Network/USB language key
params: []
- id: network_setup
label: Network Setup Key
kind: action
command: NTCSETUP
description: Network/USB setup key
params: []
- id: network_return
label: Network Return Key
kind: action
command: NTCRETURN
description: Network/USB return key
params: []
- id: network_ch_up
label: Network Channel Up (iRadio)
kind: action
command: NTCCHUP
description: Channel up for internet radio
params: []
- id: network_ch_down
label: Network Channel Down (iRadio)
kind: action
command: NTCCHDN
description: Channel down for internet radio
params: []
- id: internet_radio_preset
label: Internet Radio Preset
kind: action
command: NPR{preset}
description: "Sets internet radio preset 01-28 hex for 1-40"
params:
- name: preset
type: string
description: Preset number in hex
# ===================================================================
# ZONE 2 COMMANDS
# ===================================================================
- id: zone2_power_standby
label: Zone2 Power Standby
kind: action
command: ZPW00
description: Sets Zone2 to standby
params: []
- id: zone2_power_on
label: Zone2 Power On
kind: action
command: ZPW01
description: Sets Zone2 on
params: []
- id: zone2_mute_off
label: Zone2 Mute Off
kind: action
command: ZMT00
description: Sets Zone2 muting off
params: []
- id: zone2_mute_on
label: Zone2 Mute On
kind: action
command: ZMT01
description: Sets Zone2 muting on
params: []
- id: zone2_mute_toggle
label: Zone2 Mute Toggle
kind: action
command: ZMTTG
description: Sets Zone2 muting wrap-around
params: []
- id: zone2_volume_set
label: Set Zone2 Volume
kind: action
command: ZVL{level}
description: "Sets Zone2 volume (hex 00-64 for 0-100, or 00-50 for 0-80). Only works when main is ON."
params:
- name: level
type: string
description: Volume level in hex
- id: zone2_volume_up
label: Zone2 Volume Up
kind: action
command: ZVLUP
description: Sets Zone2 volume up
params: []
- id: zone2_volume_down
label: Zone2 Volume Down
kind: action
command: ZVLDOWN
description: Sets Zone2 volume down
params: []
- id: zone2_tone_set
label: Set Zone2 Tone
kind: action
command: ZTN{Bxx}{Txx}
description: "Sets Zone2 bass/treble (xx is -A..00..+A [-10..0..+10 2 step]). Only works when main is ON and Zone2 powered or variable."
params:
- name: Bxx
type: string
description: Bass level code
- name: Txx
type: string
description: Treble level code
- id: zone2_bass_up
label: Zone2 Bass Up
kind: action
command: ZTNBUP
description: Sets Zone2 bass up (2 step)
params: []
- id: zone2_bass_down
label: Zone2 Bass Down
kind: action
command: ZTNBDOWN
description: Sets Zone2 bass down (2 step)
params: []
- id: zone2_treble_up
label: Zone2 Treble Up
kind: action
command: ZTNTUP
description: Sets Zone2 treble up (2 step)
params: []
- id: zone2_treble_down
label: Zone2 Treble Down
kind: action
command: ZTNTDOWN
description: Sets Zone2 treble down (2 step)
params: []
- id: zone2_balance_set
label: Set Zone2 Balance
kind: action
command: ZBL{xx}
description: "Sets Zone2 balance (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Balance level code
- id: zone2_balance_up
label: Zone2 Balance Up
kind: action
command: ZBLUP
description: Sets Zone2 balance up (to R, 2 step)
params: []
- id: zone2_balance_down
label: Zone2 Balance Down
kind: action
command: ZBLDOWN
description: Sets Zone2 balance down (to L, 2 step)
params: []
- id: zone2_select_input
label: Zone2 Select Input
kind: action
command: SLZ{input}
description: "Selects Zone2 input source (same codes as SLI: 00-06,10,20-26,27,28,29,2A,30,31,32,40,80=SOURCE)"
params:
- name: input
type: string
description: Input code in hex
- id: zone2_tuning_set
label: Set Zone2 Tuning Frequency
kind: action
command: TUZ{freq}
description: "Directly tunes Zone2 frequency (FM nnn.nn MHz / AM nnnnn kHz). Tuner shared with main but control separated."
params:
- name: freq
type: string
description: Frequency value as 5-digit string
- id: zone2_tuning_up
label: Zone2 Tuning Up
kind: action
command: TUZUP
description: Sets Zone2 tuning frequency wrap-around up
params: []
- id: zone2_tuning_down
label: Zone2 Tuning Down
kind: action
command: TUZDOWN
description: Sets Zone2 tuning frequency wrap-around down
params: []
- id: zone2_preset_set
label: Set Zone2 Preset
kind: action
command: PRZ{preset}
description: "Sets Zone2 preset (01-28 hex for 1-40, or 01-1E hex for 1-30)"
params:
- name: preset
type: string
description: Preset number in hex
- id: zone2_preset_up
label: Zone2 Preset Up
kind: action
command: PRZUP
description: Sets Zone2 preset wrap-around up
params: []
- id: zone2_preset_down
label: Zone2 Preset Down
kind: action
command: PRZDOWN
description: Sets Zone2 preset wrap-around down
params: []
- id: zone2_network_play
label: Zone2 Network Play
kind: action
command: NTZPLAY
description: Zone2 network play key (control separated from main)
params: []
- id: zone2_network_stop
label: Zone2 Network Stop
kind: action
command: NTZSTOP
description: Zone2 network stop key
params: []
- id: zone2_network_pause
label: Zone2 Network Pause
kind: action
command: NTZPAUSE
description: Zone2 network pause key
params: []
- id: zone2_network_track_up
label: Zone2 Network Track Up
kind: action
command: NTZTRUP
description: Zone2 network track up
params: []
- id: zone2_network_track_down
label: Zone2 Network Track Down
kind: action
command: NTZTRDN
description: Zone2 network track down
params: []
- id: zone2_network_ch_up
label: Zone2 Channel Up (iRadio)
kind: action
command: NTZCHUP
description: Zone2 channel up for internet radio
params: []
- id: zone2_network_ch_down
label: Zone2 Channel Down (iRadio)
kind: action
command: NTZCHDN
description: Zone2 channel down for internet radio
params: []
- id: zone2_internet_radio_preset
label: Zone2 Internet Radio Preset
kind: action
command: NPZ{preset}
description: "Sets Zone2 internet radio preset 01-28 hex for 1-40 (Network Model Only)"
params:
- name: preset
type: string
description: Preset number in hex
- id: zone2_listening_mode_set
label: Set Zone2 Listening Mode
kind: action
command: LMZ{mode}
description: "00=STEREO, 01=DIRECT, 0F=MONO, 12=MULTIPLEX, 87=DVS(PL2), 88=DVS(NEO6)"
params:
- name: mode
type: string
description: Mode code in hex
- id: zone2_late_night_set
label: Set Zone2 Late Night
kind: action
command: LTZ{level}
description: "00=Off, 01=Low, 02=High, UP=wrap-around"
params:
- name: level
type: string
description: "00, 01, 02, or UP"
- id: zone2_late_night_up
label: Zone2 Late Night Up
kind: action
command: LTZUP
description: Sets Zone2 late night wrap-around up
params: []
- id: zone2_reeq_set
label: Set Zone2 Re-EQ/Academy
kind: action
command: RAZ{level}
description: "00=Both Off, 01=Re-EQ On, 02=Academy On, UP=wrap-around"
params:
- name: level
type: string
description: "00, 01, 02, or UP"
- id: zone2_reeq_up
label: Zone2 Re-EQ Up
kind: action
command: RAZUP
description: Sets Zone2 Re-EQ/Academy wrap-around up
params: []
# ===================================================================
# ZONE 3 COMMANDS
# ===================================================================
- id: zone3_power_standby
label: Zone3 Power Standby
kind: action
command: PW300
description: Sets Zone3 to standby
params: []
- id: zone3_power_on
label: Zone3 Power On
kind: action
command: PW301
description: Sets Zone3 on
params: []
- id: zone3_mute_off
label: Zone3 Mute Off
kind: action
command: MT300
description: Sets Zone3 muting off
params: []
- id: zone3_mute_on
label: Zone3 Mute On
kind: action
command: MT301
description: Sets Zone3 muting on
params: []
- id: zone3_mute_toggle
label: Zone3 Mute Toggle
kind: action
command: MT3TG
description: Sets Zone3 muting wrap-around
params: []
- id: zone3_volume_set
label: Set Zone3 Volume
kind: action
command: VL3{level}
description: "Sets Zone3 volume (hex 00-64 for 0-100, or 00-50 for 0-80)"
params:
- name: level
type: string
description: Volume level in hex
- id: zone3_volume_up
label: Zone3 Volume Up
kind: action
command: VL3UP
description: Sets Zone3 volume up
params: []
- id: zone3_volume_down
label: Zone3 Volume Down
kind: action
command: VL3DOWN
description: Sets Zone3 volume down
params: []
- id: zone3_tone_set
label: Set Zone3 Tone
kind: action
command: TN3{Bxx}{Txx}
description: "Sets Zone3 bass/treble (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: Bxx
type: string
description: Bass level code
- name: Txx
type: string
description: Treble level code
- id: zone3_bass_up
label: Zone3 Bass Up
kind: action
command: TN3BUP
description: Sets Zone3 bass up (2 step)
params: []
- id: zone3_bass_down
label: Zone3 Bass Down
kind: action
command: TN3BDOWN
description: Sets Zone3 bass down (2 step)
params: []
- id: zone3_treble_up
label: Zone3 Treble Up
kind: action
command: TN3TUP
description: Sets Zone3 treble up (2 step)
params: []
- id: zone3_treble_down
label: Zone3 Treble Down
kind: action
command: TN3TDOWN
description: Sets Zone3 treble down (2 step)
params: []
- id: zone3_balance_set
label: Set Zone3 Balance
kind: action
command: BL3{xx}
description: "Sets Zone3 balance (xx is -A..00..+A [-10..0..+10 2 step])"
params:
- name: xx
type: string
description: Balance level code
- id: zone3_balance_up
label: Zone3 Balance Up
kind: action
command: BL3UP
description: Sets Zone3 balance up (to R, 2 step)
params: []
- id: zone3_balance_down
label: Zone3 Balance Down
kind: action
command: BL3DOWN
description: Sets Zone3 balance down (to L, 2 step)
params: []
- id: zone3_select_input
label: Zone3 Select Input
kind: action
command: SL3{input}
description: "Selects Zone3 input source (same codes as SLI)"
params:
- name: input
type: string
description: Input code in hex
- id: zone3_tuning_set
label: Set Zone3 Tuning Frequency
kind: action
command: TU3{freq}
description: "Directly tunes Zone3 frequency (FM nnn.nn MHz / AM nnnnn kHz). Tuner shared but control separated."
params:
- name: freq
type: string
description: Frequency value as 5-digit string
- id: zone3_tuning_up
label: Zone3 Tuning Up
kind: action
command: TU3UP
description: Sets Zone3 tuning frequency wrap-around up
params: []
- id: zone3_tuning_down
label: Zone3 Tuning Down
kind: action
command: TU3DOWN
description: Sets Zone3 tuning frequency wrap-around down
params: []
- id: zone3_preset_set
label: Set Zone3 Preset
kind: action
command: PR3{preset}
description: "Sets Zone3 preset (01-28 hex for 1-40, or 01-1E hex for 1-30)"
params:
- name: preset
type: string
description: Preset number in hex
- id: zone3_preset_up
label: Zone3 Preset Up
kind: action
command: PR3UP
description: Sets Zone3 preset wrap-around up
params: []
- id: zone3_preset_down
label: Zone3 Preset Down
kind: action
command: PR3DOWN
description: Sets Zone3 preset wrap-around down
params: []
- id: zone3_network_play
label: Zone3 Network Play
kind: action
command: NT3PLAY
description: Zone3 network play key
params: []
- id: zone3_network_stop
label: Zone3 Network Stop
kind: action
command: NT3STOP
description: Zone3 network stop key
params: []
- id: zone3_network_pause
label: Zone3 Network Pause
kind: action
command: NT3PAUSE
description: Zone3 network pause key
params: []
- id: zone3_network_track_up
label: Zone3 Network Track Up
kind: action
command: NT3TRUP
description: Zone3 network track up
params: []
- id: zone3_network_track_down
label: Zone3 Network Track Down
kind: action
command: NT3TRDN
description: Zone3 network track down
params: []
- id: zone3_internet_radio_preset
label: Zone3 Internet Radio Preset
kind: action
command: NP3{preset}
description: "Sets Zone3 internet radio preset 01-28 hex for 1-40 (Network Model Only)"
params:
- name: preset
type: string
description: Preset number in hex
# ===================================================================
# ZONE 4 COMMANDS
# ===================================================================
- id: zone4_power_standby
label: Zone4 Power Standby
kind: action
command: PW400
description: Sets Zone4 to standby
params: []
- id: zone4_power_on
label: Zone4 Power On
kind: action
command: PW401
description: Sets Zone4 on
params: []
- id: zone4_mute_off
label: Zone4 Mute Off
kind: action
command: MT400
description: Sets Zone4 muting off
params: []
- id: zone4_mute_on
label: Zone4 Mute On
kind: action
command: MT401
description: Sets Zone4 muting on
params: []
- id: zone4_mute_toggle
label: Zone4 Mute Toggle
kind: action
command: MT4TG
description: Sets Zone4 muting wrap-around
params: []
- id: zone4_volume_set
label: Set Zone4 Volume
kind: action
command: VL4{level}
description: "Sets Zone4 volume (hex 00-64 for 0-100, or 00-50 for 0-80)"
params:
- name: level
type: string
description: Volume level in hex
- id: zone4_volume_up
label: Zone4 Volume Up
kind: action
command: VL4UP
description: Sets Zone4 volume up
params: []
- id: zone4_volume_down
label: Zone4 Volume Down
kind: action
command: VL4DOWN
description: Sets Zone4 volume down
params: []
- id: zone4_select_input
label: Zone4 Select Input
kind: action
command: SL4{input}
description: "Selects Zone4 input source (same codes as SLI)"
params:
- name: input
type: string
description: Input code in hex
- id: zone4_tuning_set
label: Set Zone4 Tuning Frequency
kind: action
command: TU4{freq}
description: "Directly tunes Zone4 frequency (FM nnn.nn MHz / AM nnnnn kHz). Tuner shared but control separated."
params:
- name: freq
type: string
description: Frequency value as 5-digit string
- id: zone4_tuning_up
label: Zone4 Tuning Up
kind: action
command: TU4UP
description: Sets Zone4 tuning frequency wrap-around up
params: []
- id: zone4_tuning_down
label: Zone4 Tuning Down
kind: action
command: TU4DOWN
description: Sets Zone4 tuning frequency wrap-around down
params: []
- id: zone4_preset_set
label: Set Zone4 Preset
kind: action
command: PR4{preset}
description: "Sets Zone4 preset (01-28 hex for 1-40, or 01-1E hex for 1-30)"
params:
- name: preset
type: string
description: Preset number in hex
- id: zone4_preset_up
label: Zone4 Preset Up
kind: action
command: PR4UP
description: Sets Zone4 preset wrap-around up
params: []
- id: zone4_preset_down
label: Zone4 Preset Down
kind: action
command: PR4DOWN
description: Sets Zone4 preset wrap-around down
params: []
- id: zone4_network_play
label: Zone4 Network Play
kind: action
command: NT4PLAY
description: Zone4 network play key
params: []
- id: zone4_network_stop
label: Zone4 Network Stop
kind: action
command: NT4STOP
description: Zone4 network stop key
params: []
- id: zone4_network_pause
label: Zone4 Network Pause
kind: action
command: NT4PAUSE
description: Zone4 network pause key
params: []
- id: zone4_network_track_up
label: Zone4 Network Track Up
kind: action
command: NT4TRUP
description: Zone4 network track up
params: []
- id: zone4_network_track_down
label: Zone4 Network Track Down
kind: action
command: NT4TRDN
description: Zone4 network track down
params: []
- id: zone4_internet_radio_preset
label: Zone4 Internet Radio Preset
kind: action
command: NP4{preset}
description: "Sets Zone4 internet radio preset 01-28 hex for 1-40 (Network Model Only)"
params:
- name: preset
type: string
description: Preset number in hex
# ===================================================================
# RI SYSTEM - CD Player (CCD)
# ===================================================================
- id: ri_cd_track
label: RI CD Track+
kind: action
command: CCDTRACK
description: CD player track+ via RI bus
params: []
- id: ri_cd_play
label: RI CD Play
kind: action
command: CCDPLAY
description: CD player play via RI bus
params: []
- id: ri_cd_stop
label: RI CD Stop
kind: action
command: CCDSTOP
description: CD player stop via RI bus
params: []
- id: ri_cd_pause
label: RI CD Pause
kind: action
command: CCDPAUSE
description: CD player pause via RI bus
params: []
- id: ri_cd_skip_fwd
label: RI CD Skip Forward
kind: action
command: CCD SKIP.F
description: CD player skip forward (>>) via RI bus
params: []
- id: ri_cd_skip_rev
label: RI CD Skip Reverse
kind: action
command: CCD SKIP.R
description: CD player skip reverse (<<) via RI bus
params: []
- id: ri_cd_memory
label: RI CD Memory
kind: action
command: CCDMEMORY
description: CD player memory via RI bus
params: []
- id: ri_cd_clear
label: RI CD Clear
kind: action
command: CCDCLEAR
description: CD player clear via RI bus
params: []
- id: ri_cd_repeat
label: RI CD Repeat
kind: action
command: CCDREPEAT
description: CD player repeat via RI bus
params: []
- id: ri_cd_random
label: RI CD Random
kind: action
command: CCDRANDOM
description: CD player random via RI bus
params: []
- id: ri_cd_display
label: RI CD Display
kind: action
command: CCDDISP
description: CD player display via RI bus
params: []
- id: ri_cd_dmode
label: RI CD D.Mode
kind: action
command: CCD D.MODE
description: CD player D.Mode via RI bus
params: []
- id: ri_cd_ff
label: RI CD FF
kind: action
command: CCDFF
description: CD player FF via RI bus
params: []
- id: ri_cd_rew
label: RI CD REW
kind: action
command: CCDREW
description: CD player REW via RI bus
params: []
- id: ri_cd_openclose
label: RI CD Open/Close
kind: action
command: CCD OP/CL
description: CD player open/close via RI bus
params: []
- id: ri_cd_disc_fwd
label: RI CD Disc+
kind: action
command: CCD DISC.F
description: CD player disc+ via RI bus
params: []
- id: ri_cd_disc_rev
label: RI CD Disc-
kind: action
command: CCD DISC.R
description: CD player disc- via RI bus
params: []
- id: ri_cd_disc_1
label: RI CD Disc1
kind: action
command: CCDDISC1
description: CD player disc1 via RI bus
params: []
- id: ri_cd_disc_2
label: RI CD Disc2
kind: action
command: CCDDISC2
description: CD player disc2 via RI bus
params: []
- id: ri_cd_disc_3
label: RI CD Disc3
kind: action
command: CCDDISC3
description: CD player disc3 via RI bus
params: []
- id: ri_cd_disc_4
label: RI CD Disc4
kind: action
command: CCDDISC4
description: CD player disc4 via RI bus
params: []
- id: ri_cd_disc_5
label: RI CD Disc5
kind: action
command: CCDDISC5
description: CD player disc5 via RI bus
params: []
- id: ri_cd_disc_6
label: RI CD Disc6
kind: action
command: CCDDISC6
description: CD player disc6 via RI bus
params: []
- id: ri_cd_standby
label: RI CD Standby
kind: action
command: CCDSTBY
description: CD player standby via RI bus
params: []
- id: ri_cd_power_on
label: RI CD Power On
kind: action
command: CCDPON
description: CD player power on via RI bus
params: []
# ===================================================================
# RI SYSTEM - Tape1 (CT1)
# ===================================================================
- id: ri_tape1_play_fwd
label: RI Tape1 Play Forward
kind: action
command: CT1 PLAY.F
description: Tape1 play forward via RI bus
params: []
- id: ri_tape1_play_rev
label: RI Tape1 Play Reverse
kind: action
command: CT1 PLAY.R
description: Tape1 play reverse via RI bus
params: []
- id: ri_tape1_stop
label: RI Tape1 Stop
kind: action
command: CT1STOP
description: Tape1 stop via RI bus
params: []
- id: ri_tape1_recpause
label: RI Tape1 Rec/Pause
kind: action
command: CT1 RC/PAU
description: Tape1 rec/pause via RI bus
params: []
- id: ri_tape1_ff
label: RI Tape1 FF
kind: action
command: CT1FF
description: Tape1 FF via RI bus
params: []
- id: ri_tape1_rew
label: RI Tape1 REW
kind: action
command: CT1REW
description: Tape1 REW via RI bus
params: []
# ===================================================================
# RI SYSTEM - Tape2 (CT2)
# ===================================================================
- id: ri_tape2_play_fwd
label: RI Tape2 Play Forward
kind: action
command: CT2 PLAY.F
description: Tape2 play forward via RI bus
params: []
- id: ri_tape2_play_rev
label: RI Tape2 Play Reverse
kind: action
command: CT2 PLAY.R
description: Tape2 play reverse via RI bus
params: []
- id: ri_tape2_stop
label: RI Tape2 Stop
kind: action
command: CT2STOP
description: Tape2 stop via RI bus
params: []
- id: ri_tape2_recpause
label: RI Tape2 Rec/Pause
kind: action
command: CT2 RC/PAU
description: Tape2 rec/pause via RI bus
params: []
- id: ri_tape2_ff
label: RI Tape2 FF
kind: action
command: CT2FF
description: Tape2 FF via RI bus
params: []
- id: ri_tape2_rew
label: RI Tape2 REW
kind: action
command: CT2REW
description: Tape2 REW via RI bus
params: []
- id: ri_tape2_openclose
label: RI Tape2 Open/Close
kind: action
command: CT2 OP/CL
description: Tape2 open/close via RI bus
params: []
- id: ri_tape2_skip_fwd
label: RI Tape2 Skip Forward
kind: action
command: CT2 SKIP.F
description: Tape2 skip forward via RI bus
params: []
- id: ri_tape2_skip_rev
label: RI Tape2 Skip Reverse
kind: action
command: CT2 SKIP.R
description: Tape2 skip reverse via RI bus
params: []
- id: ri_tape2_rec
label: RI Tape2 Rec
kind: action
command: CT2REC
description: Tape2 record via RI bus
params: []
# ===================================================================
# RI SYSTEM - Graphics Equalizer (CEQ)
# ===================================================================
- id: ri_geq_preset
label: RI Graphics EQ Preset
kind: action
command: CEQPRESET
description: Graphics equalizer preset via RI bus
params: []
# ===================================================================
# RI SYSTEM - DAT Recorder (CDT)
# ===================================================================
- id: ri_dat_play
label: RI DAT Play
kind: action
command: CDTPLAY
description: DAT play via RI bus
params: []
- id: ri_dat_recpause
label: RI DAT Rec/Pause
kind: action
command: CDT RC/PAU
description: DAT rec/pause via RI bus
params: []
- id: ri_dat_stop
label: RI DAT Stop
kind: action
command: CDTSTOP
description: DAT stop via RI bus
params: []
- id: ri_dat_skip_fwd
label: RI DAT Skip Forward
kind: action
command: CDT SKIP.F
description: DAT skip forward via RI bus
params: []
- id: ri_dat_skip_rev
label: RI DAT Skip Reverse
kind: action
command: CDT SKIP.R
description: DAT skip reverse via RI bus
params: []
- id: ri_dat_ff
label: RI DAT FF
kind: action
command: CDTFF
description: DAT FF via RI bus
params: []
- id: ri_dat_rew
label: RI DAT REW
kind: action
command: CDTREW
description: DAT REW via RI bus
params: []
# ===================================================================
# RI SYSTEM - DVD Player (CDV)
# ===================================================================
- id: ri_dvd_power_on
label: RI DVD Power On
kind: action
command: CDVPWRON
description: DVD player power on via RI bus
params: []
- id: ri_dvd_power_off
label: RI DVD Power Off
kind: action
command: CDVPWROFF
description: DVD player power off via RI bus
params: []
- id: ri_dvd_play
label: RI DVD Play
kind: action
command: CDVPLAY
description: DVD player play via RI bus
params: []
- id: ri_dvd_stop
label: RI DVD Stop
kind: action
command: CDVSTOP
description: DVD player stop via RI bus
params: []
- id: ri_dvd_skip_fwd
label: RI DVD Skip Forward
kind: action
command: CDV SKIP.F
description: DVD player skip forward via RI bus
params: []
- id: ri_dvd_skip_rev
label: RI DVD Skip Reverse
kind: action
command: CDV SKIP.R
description: DVD player skip reverse via RI bus
params: []
- id: ri_dvd_ff
label: RI DVD FF
kind: action
command: CDVFF
description: DVD player FF via RI bus
params: []
- id: ri_dvd_rew
label: RI DVD REW
kind: action
command: CDVREW
description: DVD player REW via RI bus
params: []
- id: ri_dvd_pause
label: RI DVD Pause
kind: action
command: CDVPAUSE
description: DVD player pause via RI bus
params: []
- id: ri_dvd_last_play
label: RI DVD Last Play
kind: action
command: CDVLASTPLAY
description: DVD player last play via RI bus
params: []
- id: ri_dvd_subtitle_toggle
label: RI DVD Subtitle On/Off
kind: action
command: CDV SUBTON/OFF
description: DVD player subtitle on/off via RI bus
params: []
- id: ri_dvd_subtitle
label: RI DVD Subtitle
kind: action
command: CDVSUBTITLE
description: DVD player subtitle via RI bus
params: []
- id: ri_dvd_setup
label: RI DVD Setup
kind: action
command: CDVSETUP
description: DVD player setup via RI bus
params: []
- id: ri_dvd_top_menu
label: RI DVD Top Menu
kind: action
command: CDVTOPMENU
description: DVD player top menu via RI bus
params: []
- id: ri_dvd_menu
label: RI DVD Menu
kind: action
command: CDVMENU
description: DVD player menu via RI bus
params: []
- id: ri_dvd_up
label: RI DVD Up
kind: action
command: CDVUP
description: DVD player up via RI bus
params: []
- id: ri_dvd_down
label: RI DVD Down
kind: action
command: CDVDOWN
description: DVD player down via RI bus
params: []
- id: ri_dvd_left
label: RI DVD Left
kind: action
command: CDVLEFT
description: DVD player left via RI bus
params: []
- id: ri_dvd_right
label: RI DVD Right
kind: action
command: CDVRIGHT
description: DVD player right via RI bus
params: []
- id: ri_dvd_enter
label: RI DVD Enter
kind: action
command: CDVENTER
description: DVD player enter via RI bus
params: []
- id: ri_dvd_return
label: RI DVD Return
kind: action
command: CDVRETURN
description: DVD player return via RI bus
params: []
- id: ri_dvd_disc_fwd
label: RI DVD Disc+
kind: action
command: CDV DISC.F
description: DVD player disc+ via RI bus
params: []
- id: ri_dvd_disc_rev
label: RI DVD Disc-
kind: action
command: CDV DISC.R
description: DVD player disc- via RI bus
params: []
- id: ri_dvd_audio
label: RI DVD Audio
kind: action
command: CDVAUDIO
description: DVD player audio via RI bus
params: []
- id: ri_dvd_random
label: RI DVD Random
kind: action
command: CDVRANDOM
description: DVD player random via RI bus
params: []
- id: ri_dvd_openclose
label: RI DVD Open/Close
kind: action
command: CDV OP/CL
description: DVD player open/close via RI bus
params: []
- id: ri_dvd_angle
label: RI DVD Angle
kind: action
command: CDVANGLE
description: DVD player angle via RI bus
params: []
- id: ri_dvd_search
label: RI DVD Search
kind: action
command: CDVSEARCH
description: DVD player search via RI bus
params: []
- id: ri_dvd_display
label: RI DVD Display
kind: action
command: CDVDISP
description: DVD player display via RI bus
params: []
- id: ri_dvd_repeat
label: RI DVD Repeat
kind: action
command: CDVREPEAT
description: DVD player repeat via RI bus
params: []
- id: ri_dvd_memory
label: RI DVD Memory
kind: action
command: CDVMEMORY
description: DVD player memory via RI bus
params: []
- id: ri_dvd_clear
label: RI DVD Clear
kind: action
command: CDVCLEAR
description: DVD player clear via RI bus
params: []
- id: ri_dvd_ab_repeat
label: RI DVD A-B Repeat
kind: action
command: CDVABR
description: DVD player A-B repeat via RI bus
params: []
- id: ri_dvd_step_fwd
label: RI DVD Step Forward
kind: action
command: CDV STEP.F
description: DVD player step forward via RI bus
params: []
- id: ri_dvd_step_rev
label: RI DVD Step Back
kind: action
command: CDV STEP.R
description: DVD player step back via RI bus
params: []
- id: ri_dvd_slow_fwd
label: RI DVD Slow Forward
kind: action
command: CDV SLOW.F
description: DVD player slow forward via RI bus
params: []
- id: ri_dvd_slow_rev
label: RI DVD Slow Reverse
kind: action
command: CDV SLOW.R
description: DVD player slow reverse via RI bus
params: []
- id: ri_dvd_zoom_toggle
label: RI DVD Zoom Toggle
kind: action
command: CDVZOOMTG
description: DVD player zoom toggle via RI bus
params: []
- id: ri_dvd_zoom_up
label: RI DVD Zoom Up
kind: action
command: CDVZOOMUP
description: DVD player zoom up via RI bus
params: []
- id: ri_dvd_zoom_down
label: RI DVD Zoom Down
kind: action
command: CDVZOOMDN
description: DVD player zoom down via RI bus
params: []
- id: ri_dvd_progressive
label: RI DVD Progressive
kind: action
command: CDVPROGRE
description: DVD player progressive via RI bus
params: []
- id: ri_dvd_video_off
label: RI DVD Video On/Off
kind: action
command: CDVVDOFF
description: DVD player video on/off via RI bus
params: []
- id: ri_dvd_condition_memory
label: RI DVD Condition Memory
kind: action
command: CDVCONMEM
description: DVD player condition memory via RI bus
params: []
- id: ri_dvd_function_memory
label: RI DVD Function Memory
kind: action
command: CDVFUNMEM
description: DVD player function memory via RI bus
params: []
- id: ri_dvd_disc_1
label: RI DVD Disc1
kind: action
command: CDVDISC1
description: DVD player disc1 via RI bus
params: []
- id: ri_dvd_disc_2
label: RI DVD Disc2
kind: action
command: CDVDISC2
description: DVD player disc2 via RI bus
params: []
- id: ri_dvd_disc_3
label: RI DVD Disc3
kind: action
command: CDVDISC3
description: DVD player disc3 via RI bus
params: []
- id: ri_dvd_disc_4
label: RI DVD Disc4
kind: action
command: CDVDISC4
description: DVD player disc4 via RI bus
params: []
- id: ri_dvd_disc_5
label: RI DVD Disc5
kind: action
command: CDVDISC5
description: DVD player disc5 via RI bus
params: []
- id: ri_dvd_disc_6
label: RI DVD Disc6
kind: action
command: CDVDISC6
description: DVD player disc6 via RI bus
params: []
- id: ri_dvd_folder_up
label: RI DVD Folder Up
kind: action
command: CDVFOLDUP
description: DVD player folder up via RI bus
params: []
- id: ri_dvd_folder_down
label: RI DVD Folder Down
kind: action
command: CDVFOLDDN
description: DVD player folder down via RI bus
params: []
- id: ri_dvd_play_mode
label: RI DVD Play Mode
kind: action
command: CDVP.MODE
description: DVD player play mode via RI bus
params: []
# ===================================================================
# RI SYSTEM - MD Recorder (CMD)
# ===================================================================
- id: ri_md_play
label: RI MD Play
kind: action
command: CMDPLAY
description: MD recorder play via RI bus
params: []
- id: ri_md_stop
label: RI MD Stop
kind: action
command: CMDSTOP
description: MD recorder stop via RI bus
params: []
- id: ri_md_ff
label: RI MD FF
kind: action
command: CMDFF
description: MD recorder FF via RI bus
params: []
- id: ri_md_rew
label: RI MD REW
kind: action
command: CMDREW
description: MD recorder REW via RI bus
params: []
- id: ri_md_play_mode
label: RI MD Play Mode
kind: action
command: CMDP.MODE
description: MD recorder play mode via RI bus
params: []
- id: ri_md_skip_fwd
label: RI MD Skip Forward
kind: action
command: CMD SKIP.F
description: MD recorder skip forward via RI bus
params: []
- id: ri_md_skip_rev
label: RI MD Skip Reverse
kind: action
command: CMD SKIP.R
description: MD recorder skip reverse via RI bus
params: []
- id: ri_md_pause
label: RI MD Pause
kind: action
command: CMDPAUSE
description: MD recorder pause via RI bus
params: []
- id: ri_md_rec
label: RI MD Rec
kind: action
command: CMDREC
description: MD recorder record via RI bus
params: []
- id: ri_md_memory
label: RI MD Memory
kind: action
command: CMDMEMORY
description: MD recorder memory via RI bus
params: []
- id: ri_md_display
label: RI MD Display
kind: action
command: CMDDISP
description: MD recorder display via RI bus
params: []
- id: ri_md_scroll
label: RI MD Scroll
kind: action
command: CMDSCROLL
description: MD recorder scroll via RI bus
params: []
- id: ri_md_music_scan
label: RI MD Music Scan
kind: action
command: CMDM.SCAN
description: MD recorder music scan via RI bus
params: []
- id: ri_md_clear
label: RI MD Clear
kind: action
command: CMDCLEAR
description: MD recorder clear via RI bus
params: []
- id: ri_md_random
label: RI MD Random
kind: action
command: CMDRANDOM
description: MD recorder random via RI bus
params: []
- id: ri_md_repeat
label: RI MD Repeat
kind: action
command: CMDREPEAT
description: MD recorder repeat via RI bus
params: []
- id: ri_md_enter
label: RI MD Enter
kind: action
command: CMDENTER
description: MD recorder enter via RI bus
params: []
- id: ri_md_eject
label: RI MD Eject
kind: action
command: CMDEJECT
description: MD recorder eject via RI bus
params: []
- id: ri_md_name
label: RI MD Name
kind: action
command: CMDNAME
description: MD recorder name via RI bus
params: []
- id: ri_md_group
label: RI MD Group
kind: action
command: CMDGROUP
description: MD recorder group via RI bus
params: []
- id: ri_md_standby
label: RI MD Standby
kind: action
command: CMDSTBY
description: MD recorder standby via RI bus
params: []
# ===================================================================
# RI SYSTEM - CD-R Recorder (CCR)
# ===================================================================
- id: ri_cdr_play_mode
label: RI CD-R Play Mode
kind: action
command: CCRP.MODE
description: CD-R recorder play mode via RI bus
params: []
- id: ri_cdr_play
label: RI CD-R Play
kind: action
command: CCRPLAY
description: CD-R recorder play via RI bus
params: []
- id: ri_cdr_stop
label: RI CD-R Stop
kind: action
command: CCRSTOP
description: CD-R recorder stop via RI bus
params: []
- id: ri_cdr_skip_fwd
label: RI CD-R Skip Forward
kind: action
command: CCR SKIP.F
description: CD-R recorder skip forward via RI bus
params: []
- id: ri_cdr_skip_rev
label: RI CD-R Skip Reverse
kind: action
command: CCR SKIP.R
description: CD-R recorder skip reverse via RI bus
params: []
- id: ri_cdr_pause
label: RI CD-R Pause
kind: action
command: CCRPAUSE
description: CD-R recorder pause via RI bus
params: []
- id: ri_cdr_rec
label: RI CD-R Rec
kind: action
command: CCRREC
description: CD-R recorder record via RI bus
params: []
- id: ri_cdr_clear
label: RI CD-R Clear
kind: action
command: CCRCLEAR
description: CD-R recorder clear via RI bus
params: []
- id: ri_cdr_repeat
label: RI CD-R Repeat
kind: action
command: CCRREPEAT
description: CD-R recorder repeat via RI bus
params: []
- id: ri_cdr_scroll
label: RI CD-R Scroll
kind: action
command: CCRSCROLL
description: CD-R recorder scroll via RI bus
params: []
- id: ri_cdr_openclose
label: RI CD-R Open/Close
kind: action
command: CCR OP/CL
description: CD-R recorder open/close via RI bus
params: []
- id: ri_cdr_display
label: RI CD-R Display
kind: action
command: CCRDISP
description: CD-R recorder display via RI bus
params: []
- id: ri_cdr_random
label: RI CD-R Random
kind: action
command: CCRRANDOM
description: CD-R recorder random via RI bus
params: []
- id: ri_cdr_memory
label: RI CD-R Memory
kind: action
command: CCRMEMORY
description: CD-R recorder memory via RI bus
params: []
- id: ri_cdr_ff
label: RI CD-R FF
kind: action
command: CCRFF
description: CD-R recorder FF via RI bus
params: []
- id: ri_cdr_rew
label: RI CD-R REW
kind: action
command: CCRREW
description: CD-R recorder REW via RI bus
params: []
- id: ri_cdr_standby
label: RI CD-R Standby
kind: action
command: CCRSTBY
description: CD-R recorder standby via RI bus
params: []
# ===================================================================
# RI SYSTEM - Docking Station (CDS via RI)
# ===================================================================
- id: ri_dock_power_on
label: RI Dock Power On
kind: action
command: CDSPWRON
description: Docking station on via RI bus
params: []
- id: ri_dock_power_off
label: RI Dock Standby
kind: action
command: CDSPWROFF
description: Docking station standby via RI bus
params: []
- id: ri_dock_play_resume
label: RI Dock Play/Resume
kind: action
command: CDS PLY/RES
description: Dock play/resume key via RI bus
params: []
- id: ri_dock_stop
label: RI Dock Stop
kind: action
command: CDSSTOP
description: Dock stop key via RI bus
params: []
- id: ri_dock_track_up
label: RI Dock Track Up
kind: action
command: CDS SKIP.F
description: Dock track up key via RI bus
params: []
- id: ri_dock_track_down
label: RI Dock Track Down
kind: action
command: CDS SKIP.R
description: Dock track down key via RI bus
params: []
- id: ri_dock_pause
label: RI Dock Pause
kind: action
command: CDSPAUSE
description: Dock pause key via RI bus
params: []
- id: ri_dock_play_pause
label: RI Dock Play/Pause
kind: action
command: CDS PLY/PAU
description: Dock play/pause key via RI bus
params: []
- id: ri_dock_ff
label: RI Dock FF
kind: action
command: CDSFF
description: Dock FF key via RI bus
params: []
- id: ri_dock_rew
label: RI Dock REW
kind: action
command: CDSREW
description: Dock FR key via RI bus
params: []
- id: ri_dock_album_up
label: RI Dock Album Up
kind: action
command: CDS ALBUM+
description: Dock album up key via RI bus
params: []
- id: ri_dock_album_down
label: RI Dock Album Down
kind: action
command: CDS ALBUM-
description: Dock album down key via RI bus
params: []
- id: ri_dock_playlist_up
label: RI Dock Playlist Up
kind: action
command: CDS PLIST+
description: Dock playlist up key via RI bus
params: []
- id: ri_dock_playlist_down
label: RI Dock Playlist Down
kind: action
command: CDS PLIST-
description: Dock playlist down key via RI bus
params: []
- id: ri_dock_chapter_up
label: RI Dock Chapter Up
kind: action
command: CDS CHAPT+
description: Dock chapter up key via RI bus
params: []
- id: ri_dock_chapter_down
label: RI Dock Chapter Down
kind: action
command: CDS CHAPT-
description: Dock chapter down key via RI bus
params: []
- id: ri_dock_shuffle
label: RI Dock Shuffle
kind: action
command: CDSRANDOM
description: Dock shuffle key via RI bus
params: []
- id: ri_dock_repeat
label: RI Dock Repeat
kind: action
command: CDSREPEAT
description: Dock repeat key via RI bus
params: []
- id: ri_dock_mute
label: RI Dock Mute
kind: action
command: CDSMUTE
description: Dock mute key via RI bus
params: []
- id: ri_dock_backlight
label: RI Dock Backlight
kind: action
command: CDSBLIGHT
description: Dock backlight key via RI bus
params: []
- id: ri_dock_menu
label: RI Dock Menu
kind: action
command: CDSMENU
description: Dock menu key via RI bus
params: []
- id: ri_dock_enter
label: RI Dock Select
kind: action
command: CDSENTER
description: Dock select key via RI bus
params: []
- id: ri_dock_up
label: RI Dock Cursor Up
kind: action
command: CDSUP
description: Dock cursor up key via RI bus
params: []
- id: ri_dock_down
label: RI Dock Cursor Down
kind: action
command: CDSDOWN
description: Dock cursor down key via RI bus
params: []
Feedbacks
# --- MAIN ZONE ---
- id: power_state
label: Power State
command: PWRQSTN
response: PWR{status}
type: enum
values: ["00", "01"]
description: "00=Standby, 01=On"
- id: mute_state
label: Mute State
command: AMTQSTN
response: AMT{status}
type: enum
values: ["00", "01"]
description: "00=Off, 01=On"
- id: speaker_a_state
label: Speaker A State
command: SPAQSTN
response: SPA{status}
type: string
description: Speaker A state (model-conditional)
- id: speaker_b_state
label: Speaker B State
command: SPBQSTN
response: SPB{status}
type: string
description: Speaker B state (model-conditional)
- id: speaker_layout
label: Speaker Layout
command: SPLQSTN
response: SPL{layout}
type: string
description: "Current speaker layout (SB/FH/FW)"
- id: master_volume
label: Master Volume Level
command: MVLQSTN
response: MVL{level}
type: string
description: Volume level in hex (00-64 for 0-100)
- id: tone_front
label: Front Tone
command: TFRQSTN
response: TFR{Bxx}{Txx}
type: string
description: "Front bass+treble (BxxTxx)"
- id: tone_front_wide
label: Front Wide Tone
command: TFWQSTN
response: TFW{Bxx}{Txx}
type: string
description: Front Wide bass+treble
- id: tone_front_high
label: Front High Tone
command: TFHQSTN
response: TFH{Bxx}{Txx}
type: string
description: Front High bass+treble
- id: tone_center
label: Center Tone
command: TCTQSTN
response: TCT{Bxx}{Txx}
type: string
description: Center bass+treble
- id: tone_surround
label: Surround Tone
command: TSRQSTN
response: TSR{Bxx}{Txx}
type: string
description: Surround bass+treble
- id: tone_surround_back
label: Surround Back Tone
command: TSBQSTN
response: TSB{Bxx}{Txx}
type: string
description: Surround Back bass+treble
- id: tone_subwoofer
label: Subwoofer Tone
command: TSWQSTN
response: TSW{Bxx}
type: string
description: Subwoofer bass
- id: subwoofer_level
label: Subwoofer Temporary Level
command: SWLQSTN
response: SWL{level}
type: string
description: "-F to 00 to +C (-15dB to 0dB to +12dB)"
- id: center_level
label: Center Temporary Level
command: CTLQSTN
response: CTL{level}
type: string
description: "-C to 00 to +C (-12dB to 0dB to +12dB)"
- id: input_selector
label: Input Selector Position
command: SLIQSTN
response: SLI{position}
type: string
description: Current input selector position code in hex
- id: listening_mode
label: Listening Mode
command: LMDQSTN
response: LMD{mode}
type: string
description: Current listening mode code in hex
- id: dimmer_level
label: Dimmer Level
command: DIMQSTN
response: DIM{level}
type: enum
values: ["00", "01", "02", "03"]
description: "00=Bright, 01=Dim, 02=Dark, 03=Shut-Off"
- id: sleep_time
label: Sleep Timer
command: SLPQSTN
response: SLP{time}
type: string
description: Sleep time in hex or OFF
- id: late_night
label: Late Night Level
command: LTNQSTN
response: LTN{level}
type: enum
values: ["00", "01", "02", "03"]
description: "00=Off, 01=Low, 02=High, 03=Auto"
- id: display_mode
label: Display Mode
command: DIFQSTN
response: DIF{mode}
type: string
description: Current display mode
- id: audio_selector
label: Audio Selector Status
command: SLAQSTN
response: SLA{status}
type: string
description: Current audio selector status
- id: recout_selector
label: Record Output Selector Position
command: SLRQSTN
response: SLR{position}
type: string
description: Current record output selector position
- id: hdmi_output
label: HDMI Output Selector
command: HDOQSTN
response: HDO{mode}
type: string
description: Current HDMI output mode
- id: monitor_resolution
label: Monitor Out Resolution
command: RESQSTN
response: RES{mode}
type: string
description: Current monitor output resolution setting
- id: video_output
label: Video Output Selector
command: VOSQSTN
response: VOS{mode}
type: string
description: Current video output (Japanese model only)
- id: isf_mode
label: ISF Mode State
command: ISFQSTN
response: ISF{mode}
type: string
description: Current ISF mode state
- id: reeq_state
label: Re-EQ/Academy/Cinema Filter State
command: RASQSTN
response: RAS{status}
type: string
description: Current Re-EQ/Academy/cinema filter state
- id: audyssey_multeq_state
label: Audyssey 2EQ/MultEQ State
command: ADYQSTN
response: ADY{status}
type: string
description: "00=Off, 01=On"
- id: audyssey_dynamic_eq_state
label: Audyssey Dynamic EQ State
command: ADQQSTN
response: ADQ{status}
type: string
description: "00=Off, 01=On"
- id: audyssey_dynamic_volume_state
label: Audyssey Dynamic Volume State
command: ADVQSTN
response: ADV{status}
type: string
description: "00=Off, 01=Light, 02=Medium, 03=Heavy"
- id: dolby_volume_state
label: Dolby Volume State
command: DVLQSTN
response: DVL{status}
type: string
description: "00=Off, 01=Low, 02=Mid, 03=High"
- id: music_optimizer_state
label: Music Optimizer State
command: MOTQSTN
response: MOT{status}
type: string
description: "00=Off, 01=On"
- id: audio_info
label: Audio Information
command: IFAQSTN
response: IFA{nnnnn:nnnnn}
type: string
description: "Audio info (same as immediate display, comma-separated). Returned after DIF02."
- id: video_info
label: Video Information
command: IFVQSTN
response: IFV{nnnnn:nnnnn}
type: string
description: "Video info (same as immediate display, comma-separated). Returned after DIF03."
# --- TUNER ---
- id: tuning_frequency
label: Tuning Frequency
command: TUNQSTN
response: TUN{freq}
type: string
description: "Current tuning frequency (FM nnn.nn MHz / AM nnnnn kHz)"
- id: preset_number
label: Preset Number
command: PRSQSTN
response: PRS{no}
type: string
description: Current preset number in hex
# --- XM (XM Model Only) ---
- id: xm_channel_name
label: XM Channel Name
command: XCNQSTN
response: XCN{name}
type: string
description: XM channel name (XM Model Only)
- id: xm_artist
label: XM Artist Name
command: XATQSTN
response: XAT{name}
type: string
description: XM artist name (XM Model Only)
- id: xm_title
label: XM Title
command: XTIQSTN
response: XTI{name}
type: string
description: XM title (XM Model Only)
- id: xm_channel
label: XM Channel Number
command: XCHQSTN
response: XCH{no}
type: string
description: XM channel number 000-255 (XM Model Only)
- id: xm_category
label: XM Category
command: XCTQSTN
response: XCT{category}
type: string
description: XM category info (XM Model Only)
# --- SIRIUS (SIRIUS Model Only) ---
- id: sirius_channel_name
label: SIRIUS Channel Name
command: SCNQSTN
response: SCN{name}
type: string
description: SIRIUS channel name (SIRIUS Model Only)
- id: sirius_artist
label: SIRIUS Artist Name
command: SATQSTN
response: SAT{name}
type: string
description: SIRIUS artist name (SIRIUS Model Only)
- id: sirius_title
label: SIRIUS Title
command: STIQSTN
response: STI{name}
type: string
description: SIRIUS title (SIRIUS Model Only)
- id: sirius_channel
label: SIRIUS Channel Number
command: SCHQSTN
response: SCH{no}
type: string
description: SIRIUS channel number 000-255 (SIRIUS Model Only)
- id: sirius_category
label: SIRIUS Category
command: SCTQSTN
response: SCT{category}
type: string
description: SIRIUS category info (SIRIUS Model Only)
# --- HD RADIO (HD Radio Model Only) ---
- id: hd_radio_artist
label: HD Radio Artist Name
command: HATQSTN
response: HAT{name}
type: string
description: HD Radio artist name (64 digits max, HD Radio Model Only)
- id: hd_radio_channel_name
label: HD Radio Channel Name
command: HCNQSTN
response: HCN{name}
type: string
description: HD Radio channel/station name (7 digits, HD Radio Model Only)
- id: hd_radio_title
label: HD Radio Title
command: HTIQSTN
response: HTI{name}
type: string
description: HD Radio title (64 digits max, HD Radio Model Only)
- id: hd_radio_detail
label: HD Radio Detail Info
command: HDSQSTN
response: HDS{info}
type: string
description: HD Radio detail title (HD Radio Model Only)
- id: hd_radio_program
label: HD Radio Channel Program
command: HPRQSTN
response: HPR{no}
type: string
description: HD Radio channel program 01-08 (HD Radio Model Only)
- id: hd_radio_blend
label: HD Radio Blend Mode
command: HBLQSTN
response: HBL{mode}
type: string
description: "00=Auto, 01=Analog (HD Radio Model Only)"
- id: hd_radio_tuner_status
label: HD Radio Tuner Status
command: HTSQSTN
response: HTS{mmnnoo}
type: string
description: "3-byte status: mm=00 not HD/01 HD, nn=current program 01-08, oo=receivable programs bitmask (HD Radio Model Only)"
# --- NETWORK / USB ---
- id: net_play_status
label: Network/USB Play Status
command: NSTQSTN
response: NST{status}
type: string
description: "3-letter status: p=Play/Pause/Stop/FF/FR, r=Repeat, s=Shuffle"
- id: net_track_info
label: Network/USB Track Info
command: NTRQSTN
response: NTR{info}
type: string
description: "cccc/tttt (current/total track)"
- id: net_time_info
label: Network/USB Time Info
command: NTMQSTN
response: NTM{info}
type: string
description: "mm:ss/mm:ss (elapsed/total)"
- id: net_artist
label: Network/USB Artist Name
command: NATQSTN
response: NAT{name}
type: string
description: Artist name up to 64 characters
- id: net_album
label: Network/USB Album Name
command: NALQSTN
response: NAL{name}
type: string
description: Album name up to 64 characters
- id: net_title
label: Network/USB Title Name
command: NTIQSTN
response: NTI{name}
type: string
description: Title name up to 64 characters
# --- ZONE 2 ---
- id: zone2_power_state
label: Zone2 Power State
command: ZPWQSTN
response: ZPW{status}
type: enum
values: ["00", "01"]
description: "00=Standby, 01=On"
- id: zone2_mute_state
label: Zone2 Mute State
command: ZMTQSTN
response: ZMT{status}
type: string
description: "00=Off, 01=On"
- id: zone2_volume
label: Zone2 Volume Level
command: ZVLQSTN
response: ZVL{level}
type: string
description: Zone2 volume level in hex
- id: zone2_tone
label: Zone2 Tone
command: ZTNQSTN
response: ZTN{Bxx}{Txx}
type: string
description: Zone2 bass+treble
- id: zone2_balance
label: Zone2 Balance
command: ZBLQSTN
response: ZBL{xx}
type: string
description: Zone2 balance
- id: zone2_selector
label: Zone2 Selector Position
command: SLZQSTN
response: SLZ{position}
type: string
description: Zone2 input selector position
- id: zone2_tuning
label: Zone2 Tuning Frequency
command: TUZQSTN
response: TUZ{freq}
type: string
description: Zone2 tuning frequency
- id: zone2_preset
label: Zone2 Preset Number
command: PRZQSTN
response: PRZ{no}
type: string
description: Zone2 preset number in hex
- id: zone2_late_night
label: Zone2 Late Night Level
command: LTZQSTN
response: LTZ{level}
type: string
description: "00=Off, 01=Low, 02=High"
- id: zone2_reeq_state
label: Zone2 Re-EQ/Academy State
command: RAZQSTN
response: RAZ{status}
type: string
description: Zone2 Re-EQ/Academy state
# --- ZONE 3 ---
- id: zone3_power_state
label: Zone3 Power State
command: PW3QSTN
response: PW3{status}
type: enum
values: ["00", "01"]
description: "00=Standby, 01=On"
- id: zone3_mute_state
label: Zone3 Mute State
command: MT3QSTN
response: MT3{status}
type: string
description: "00=Off, 01=On"
- id: zone3_volume
label: Zone3 Volume Level
command: VL3QSTN
response: VL3{level}
type: string
description: Zone3 volume level in hex
- id: zone3_tone
label: Zone3 Tone
command: TN3QSTN
response: TN3{Bxx}{Txx}
type: string
description: Zone3 bass+treble
- id: zone3_balance
label: Zone3 Balance
command: BL3QSTN
response: BL3{xx}
type: string
description: Zone3 balance
- id: zone3_selector
label: Zone3 Selector Position
command: SL3QSTN
response: SL3{position}
type: string
description: Zone3 input selector position
- id: zone3_tuning
label: Zone3 Tuning Frequency
command: TU3QSTN
response: TU3{freq}
type: string
description: Zone3 tuning frequency
- id: zone3_preset
label: Zone3 Preset Number
command: PR3QSTN
response: PR3{no}
type: string
description: Zone3 preset number in hex
# --- ZONE 4 ---
- id: zone4_power_state
label: Zone4 Power State
command: PW4QSTN
response: PW4{status}
type: enum
values: ["00", "01"]
description: "00=Standby, 01=On"
- id: zone4_mute_state
label: Zone4 Mute State
command: MT4QSTN
response: MT4{status}
type: string
description: "00=Off, 01=On"
- id: zone4_volume
label: Zone4 Volume Level
command: VL4QSTN
response: VL4{level}
type: string
description: Zone4 volume level in hex
- id: zone4_selector
label: Zone4 Selector Position
command: SL4QSTN
response: SL4{position}
type: string
description: Zone4 input selector position
- id: zone4_tuning
label: Zone4 Tuning Frequency
command: TU4QSTN
response: TU4{freq}
type: string
description: Zone4 tuning frequency
- id: zone4_preset
label: Zone4 Preset Number
command: PR4QSTN
response: PR4{no}
type: string
description: Zone4 preset number in hex
Variables
- id: master_volume_level
label: Master Volume Level
command: MVL
type: integer
min: 0
max: 100
description: Volume level 0-100, sent as hex
- id: tone_front_bass
label: Front Bass Tone
command: TFRB{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_front_treble
label: Front Treble Tone
command: TFRT{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_front_wide_bass
label: Front Wide Bass Tone
command: TFWB{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_front_wide_treble
label: Front Wide Treble Tone
command: TFWT{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_front_high_bass
label: Front High Bass Tone
command: TFHB{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_front_high_treble
label: Front High Treble Tone
command: TFHT{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_center_bass
label: Center Bass Tone
command: TCTB{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_center_treble
label: Center Treble Tone
command: TCTT{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_surround_bass
label: Surround Bass Tone
command: TSRB{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_surround_treble
label: Surround Treble Tone
command: TSRT{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_surround_back_bass
label: Surround Back Bass Tone
command: TSBB{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_surround_back_treble
label: Surround Back Treble Tone
command: TSBT{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: tone_subwoofer_bass
label: Subwoofer Tone
command: TSWB{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: subwoofer_level
label: Subwoofer Temporary Level
command: SWL{level}
type: string
description: "-F to 00 to +C (-15dB to 0dB to +12dB)"
- id: center_level
label: Center Temporary Level
command: CTL{level}
type: string
description: "-C to 00 to +C (-12dB to 0dB to +12dB)"
- id: zone2_volume_level
label: Zone2 Volume Level
command: ZVL
type: integer
min: 0
max: 100
description: Zone2 volume 0-100, sent as hex (only when main is ON)
- id: zone2_balance
label: Zone2 Balance
command: ZBL{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: zone2_bass
label: Zone2 Bass Tone
command: ZTNB{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: zone2_treble
label: Zone2 Treble Tone
command: ZTNT{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: zone3_volume_level
label: Zone3 Volume Level
command: VL3
type: integer
min: 0
max: 100
description: Zone3 volume 0-100, sent as hex
- id: zone3_balance
label: Zone3 Balance
command: BL3{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: zone3_bass
label: Zone3 Bass Tone
command: TN3B{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: zone3_treble
label: Zone3 Treble Tone
command: TN3T{xx}
type: string
description: "-A to 00 to +A (-10 to 0 to +10 in 2-step increments)"
- id: zone4_volume_level
label: Zone4 Volume Level
command: VL4
type: integer
min: 0
max: 100
description: Zone4 volume 0-100, sent as hex
- id: tuning_frequency
label: Tuning Frequency
command: TUN{freq}
type: string
description: "Direct tuning frequency (FM nnn.nn MHz / AM nnnnn kHz / XM nnnnn ch)"
- id: preset_number_var
label: Preset Number
command: PRS{preset}
type: integer
min: 1
max: 40
description: "Preset number 1-40 (sent as hex), or 1-30 on some models"
Events
# Device sends unsolicited status messages when state changes.
# Example: if input selector changes, receiver sends "SLI03" to controller.
# Connection must be held continuously to receive notifications.
# Only one client connection supported at a time.
# Applies to all zones: any Zone2/Zone3/Zone4 state change produces an
# unsolicited notification (e.g. "ZPW01", "VL350", "SL301").
Macros
# UNRESOLVED: no explicit multi-step macro sequences in source
Safety
confirmation_required_for: []
interlocks:
- Zone2 volume/control only works when main zone is ON
- Zone2 tone only works when main is ON and Zone2 is powered or variable
- TGA/TGB/TGC 12V trigger commands only available when each trigger parameter is set to OFF in the setup menu
# UNRESOLVED: no explicit safety warnings or interlock procedures stated in source
Notes
- Protocol is ISCP (Integra Serial Control Protocol) v1.15, available over both eISCP (Ethernet/TCP) and RS-232C (serial).
- eISCP packet format: magic header "ISCP" + 4-byte header size (0x00000010 big-endian) + 4-byte data size (big-endian) + 1-byte version (0x01) + 3-byte reserved (0x000000) + ISCP data.
- ISCP message format: start char "!" + unit type "1" (Receiver) + 3-char command + parameter(s) + end char (EOF=0x1A for eISCP, CR/LF for RS-232).
- RS-232C transport: 3-wire, 9600 baud, 8 data bits, 1 stop bit, no parity, no flow control. DB9 female (pin 2 TX, pin 3 RX, pin 5 GND), straight-thru cable.
- Minimum interval between commands: 50ms.
- Only one TCP client connection at a time; must maintain persistent connection to receive unsolicited status notifications.
- Volume parameters are in hexadecimal representation (e.g. "00"-"64" = decimal 0-100).
- Many commands use "QSTN" parameter to query current state, "UP"/"DOWN" for wrap-around cycling, "TG" for toggle.
- FF/REW network commands must be sent continuously with no more than 100ms delay between codes.
- Tuner function is shared by MAIN and ZONE sides but control is separated per zone.
- XM/SIRIUS/HD Radio commands are model-conditional (only on models with those tuner packs). VOS is Japanese-model only.
- Many command rows in the source support matrix show applicability varying by model generation; HT-L05 is not named in the revision history, so per-command applicability to HT-L05 is UNRESOLVED.
- DIF has two distinct meanings: the "Display Information" table (DIF00-04 = temporary displays of program/digital/bass/treble info) and the "Display Mode" table (DIF00/01/TG = persistent selector+volume/listening-mode display). Both use the DIF opcode; behavior is model-dependent.
- RAS is overloaded across three meanings depending on model generation: Re-EQ/Academy Filter, Re-EQ only, or Cinema Filter.
Provenance
source_domains:
- community.symcon.de
source_urls:
- https://community.symcon.de/uploads/short-url/7mxbIQ7qRIghfbEQrvcrEkU57ad.pdf
retrieved_at: 2026-05-21T20:35:53.620Z
last_checked_at: 2026-07-21T23:41:23.711Z
Verification Summary
verdict: verified
checked_at: 2026-07-21T23:41:23.711Z
matched_actions: 415
action_count: 415
confidence: medium
summary: "Near-exhaustive one-to-one mapping of the ISCP/eISCP command catalogue (main+zone2/3/4+RI-bus) with verbatim command-code and parameter matches and verified transport params; only a handful of universally-unsupported source tokens are unrepresented. (8 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "SWL (Subwoofer temporary Level set/UP/DOWN)"
- "CTL (Center temporary Level set/UP/DOWN)"
- "ASCTG (CDV aspect toggle, unsupported on all listed models)"
- "CDPCD (CDV chain repeat, unsupported on all listed models)"
- "MSPUP/MSPDN (CDV multi speed, unsupported)"
- "PCT (CDV picture control, unsupported)"
- "RSCTG (CDV resolution toggle, unsupported)"
- "INIT (CDV factory reset, unsupported)"
- "exact HT-L05 firmware version compatibility not stated"
- "HT-L05 is not listed in the revision history model tables; per-command applicability to HT-L05 specifically is unclear. Many commands below are model-conditional (XM/SIRIUS/HD Radio/Japanese/Network-only) and may not apply to HT-L05"
- "configurable range 49152-65535 per source; default is 60128"
- "no explicit multi-step macro sequences in source"
- "no explicit safety warnings or interlock procedures stated in source"
- "exact command subset supported by HT-L05 not stated — source lists many models across columns; HT-L05 not explicitly named in the revision history"
- "firmware version compatibility not stated"
- "many commands are model-conditional (XM/SIRIUS/HD Radio/Network/Japanese) and HT-L05 support for them is unconfirmed"
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0