AI4AVSummary
Lightware DP-TPS-TX220 is a DisplayPort-to-TPS (HDBaseT) transmitter with local HDMI output, part of the HDMI-TPS-TX200 series. It accepts LW2 and LW3 ASCII control protocols over the RS-232 (3-pole Phoenix) serial port and over Ethernet (RJ45). This spec covers serial (RS-232C) control primarily, with Ethernet transports also documented.
Transport
protocols:
- serial
- tcp
serial:
baud_rate: 57600 # default per Factory Default Settings table; range 4800..115200
data_bits: 8 # default; alt 9
parity: none # default; alt odd/even
stop_bits: 1 # default; alt 1.5 / 2
flow_control: null # UNRESOLVED: not stated in source
addressing:
port: 6107 # LW3 TCP control port (also 10001 LW2, 80 HTTP per Applied Ports table)
auth:
type: UNRESOLVED # Source documents cleartext login as Plus-only; base TX220 authentication behavior is not stated.
Traits
traits:
- routable # inferred: input->output switching commands present (LW2 {<in>@<out>}, LW3 XP:switch)
- queryable # inferred: many state/status queries present
- levelable # inferred: analog audio volume/balance/gain control present
Actions
# ---- LW2: General / System ----
- id: lcmd_list
label: List Supported Commands (LW2)
kind: query
command: "{LCMD}"
params: []
- id: product_type_query
label: Product Type (LW2)
kind: query
command: "{i}"
params: []
- id: device_label_query
label: Device Label (LW2)
kind: query
command: "{LABEL}"
params: []
- id: control_protocol_query
label: Control Protocol Query (LW2)
kind: query
command: "{P_?}"
params: []
- id: firmware_version_query
label: CPU Firmware Version (LW2)
kind: query
command: "{f}"
params: []
- id: ping
label: Connection Test (LW2)
kind: query
command: "{PING}"
params: []
- id: serial_number_query
label: Serial Number (LW2)
kind: query
command: "{S}"
params: []
- id: compile_time_query
label: Compile Time (LW2)
kind: query
command: "{CT}"
params: []
- id: installed_board_query
label: Installed Board (LW2)
kind: query
command: "{IS}"
params: []
- id: firmware_controllers_query
label: Firmware All Controllers (LW2)
kind: query
command: "{FC}"
params: []
- id: restart_device
label: Restart Device (LW2)
kind: action
command: "{RST}"
params: []
- id: health_status_query
label: Health Status (LW2)
kind: query
command: "{ST}"
params: []
- id: factory_default_all
label: Restore Factory Defaults (LW2)
kind: action
command: "{FACTORY=ALL}"
params: []
# ---- LW2: AV crosspoint ----
- id: lw2_switch_input
label: Switch Input to Output (LW2)
kind: action
command: "{<in>@<out> <layer>}"
params:
- name: in
type: integer
description: "Input port (I1=DP in; 0=disconnect)"
- name: out
type: integer
description: "Output port (O1=TPS out, O2=HDMI out)"
- name: layer
type: string
description: "A / V / AV"
- id: lw2_mute_output
label: Mute Output (LW2)
kind: action
command: "{#<out> <layer>}"
params:
- name: out
type: integer
- name: layer
type: string
- id: lw2_unmute_output
label: Unmute Output (LW2)
kind: action
command: "{+<out> <layer>}"
params:
- name: out
type: integer
- name: layer
type: string
- id: lw2_lock_output
label: Lock Output (LW2)
kind: action
command: "{#><out> <layer>}"
params:
- name: out
type: integer
- name: layer
type: string
- id: lw2_unlock_output
label: Unlock Output (LW2)
kind: action
command: "{+<<out> <layer>}"
params:
- name: out
type: integer
- name: layer
type: string
- id: lw2_connection_state_query
label: Connection State on Output (LW2)
kind: query
command: "{VC <layer>}"
params:
- name: layer
type: string
- id: lw2_crosspoint_size_query
label: Crosspoint Size (LW2)
kind: query
command: "{getsize <layer>}"
params:
- name: layer
type: string
- id: lw2_video_autoselect_mode
label: Video Autoselect Mode (LW2)
kind: action
command: "{AS_V<out>=<state>;<mode>}"
params:
- name: out
type: integer
- name: state
type: string
description: "E=enabled, D=disabled"
- name: mode
type: string
description: "F=first, L=last, P=priority"
- id: lw2_audio_autoselect_mode
label: Audio Autoselect Mode (LW2)
kind: action
command: "{AS_A<out>=<state>;<mode>}"
params:
- name: out
type: integer
- name: state
type: string
- name: mode
type: string
- id: lw2_video_priority
label: Video Input Priorities (LW2)
kind: action
command: "{PRIO_V<out>=<in1_prio>;<in2_prio>;<in3_prio>;<in4_prio>}"
params:
- name: out
type: integer
- name: prios
type: string
description: "4 priority numbers 0..3 (0=highest)"
- id: lw2_audio_priority
label: Audio Input Priority (LW2)
kind: action
command: "{PRIO_A<out>=<in1_prio>;<in2_prio>;<in3_prio>;<in4_prio>;<in5_prio>}"
params:
- name: out
type: integer
- name: prios
type: string
# ---- LW2: GPIO ----
- id: lw2_gpio_set
label: GPIO Level/Direction (LW2)
kind: action
command: "{GPIO<pin>=<dir>;<level>}"
params:
- name: pin
type: integer
description: "0-7"
- name: dir
type: string
description: "I=input, O=output"
- name: level
type: string
description: "L=low, H=high, T=toggle"
# ---- LW2: Network ----
- id: lw2_ip_stat_query
label: IP Status Query (LW2)
kind: query
command: "{IP_STAT=?}"
params: []
- id: lw2_set_ip_address
label: Set IP Address (LW2)
kind: action
command: "{IP_ADDRESS=<type>;<ip_address>}"
params:
- name: type
type: integer
description: "0=static, 1=DHCP"
- name: ip_address
type: string
- id: lw2_set_netmask
label: Set Subnet Mask (LW2)
kind: action
command: "{IP_NETMASK=<subnet_mask>}"
params:
- name: subnet_mask
type: string
- id: lw2_set_gateway
label: Set Gateway (LW2)
kind: action
command: "{IP_GATEWAY=<gateway_addr>}"
params:
- name: gateway_addr
type: string
- id: lw2_ip_apply
label: Apply Network Settings (LW2)
kind: action
command: "{ip_apply}"
params: []
- id: lw2_eth_enable
label: Enable/Disable Ethernet Port (LW2)
kind: action
command: "{ETH_ENABLE=<switch>}"
params:
- name: switch
type: integer
description: "0=disable, 1=enable"
# ---- LW2: Serial port config ----
- id: lw2_rs232_mode
label: RS-232 Control Mode (LW2)
kind: action
command: "{RS232=<mode>}"
params:
- name: mode
type: string
description: "PASS / CONTROL / CI"
- id: lw2_rs232_local_format
label: Local RS-232 Format (LW2)
kind: action
command: "{RS232_LOCAL_FORMAT=<baud_rate>;<data_bit>;<parity>;<stop_bit>}"
params:
- name: baud_rate
type: string
description: "4800;7200;9600;14400;19200;38400;57600;115200 (X=skip)"
- name: data_bit
type: string
description: "8;9 (X=skip)"
- name: parity
type: string
description: "N;E;O (X=skip)"
- name: stop_bit
type: string
description: "1;1.5;2 (X=skip)"
- id: lw2_rs232_link_format
label: Link RS-232 Format (LW2)
kind: action
command: "{RS232_LINK_FORMAT=<baud_rate>;<data_bit>;<parity>;<stop_bit>}"
params:
- name: baud_rate
type: string
- name: data_bit
type: string
- name: parity
type: string
- name: stop_bit
type: string
- id: lw2_rs232_local_prot
label: Local RS-232 Protocol (LW2)
kind: action
command: "{RS232_LOCAL_PROT=<protocol>}"
params:
- name: protocol
type: string
description: "LW2 / LW3"
- id: lw2_rs232_link_prot
label: Link RS-232 Protocol (LW2)
kind: action
command: "{RS232_LINK_PROT=<protocol>}"
params:
- name: protocol
type: string
description: "LW2 / LW3"
# ---- LW3: System ----
- id: lw3_product_name
label: Product Name (LW3)
kind: query
command: "GET /.ProductName"
params: []
- id: lw3_set_device_label
label: Set Device Label (LW3)
kind: action
command: "SET /MANAGEMENT/UID.DeviceLabel=<device_label>"
params:
- name: device_label
type: string
description: "max 39 ASCII chars"
- id: lw3_serial_number
label: Serial Number (LW3)
kind: query
command: "GET /.SerialNumber"
params: []
- id: lw3_cpu_firmware
label: CPU Firmware Version (LW3)
kind: query
command: "GET /SYS/MB.FirmwareVersion"
params: []
- id: lw3_package_version
label: Package Version (LW3)
kind: query
command: "GET /MANAGEMENT/UID.PackageVersion"
params: []
- id: lw3_reset
label: Reset Device (LW3)
kind: action
command: "CALL /SYS:reset(1)"
params: []
- id: lw3_factory_defaults
label: Factory Defaults (LW3)
kind: action
command: "CALL /SYS:factoryDefaults()"
params: []
- id: lw3_control_lock
label: Control Lock (LW3)
kind: action
command: "SET /MANAGEMENT/UI.ControlLock=<lock_status>"
params:
- name: lock_status
type: integer
description: "0=none, 1=locked(unlockable), 2=locked"
- id: lw3_identify_me
label: Identify Device (LW3)
kind: action
command: "CALL /MANAGEMENT/UI:identifyMe()"
params: []
- id: lw3_darkmode_enable
label: Dark Mode Enable (LW3)
kind: action
command: "SET /MANAGEMENT/UI/DARKMODE.DarkModeEnable=<mode_state>"
params:
- name: mode_state
type: string
description: "true/1 or false/0"
- id: lw3_darkmode_delay
label: Dark Mode Delay (LW3)
kind: action
command: "SET /MANAGEMENT/UI/DARKMODE.DarkModeDelay=<delay_time>"
params:
- name: delay_time
type: integer
description: "seconds; default 60; 0=no delay"
- id: lw3_macro_run
label: Run Macro (LW3)
kind: action
command: "CALL /CTRL/MACROS:run(<macro_name>)"
params:
- name: macro_name
type: string
notes: Plus-only; FW package v1.3.0b6+
# ---- LW3: Login (Plus-only; documented but not on base TX220) ----
- id: lw3_set_password
label: Set Login Password (LW3)
kind: action
command: "CALL /LOGIN:setPassword(<password>)"
params:
- name: password
type: string
notes: Plus-only (SW4-TPS-TX240-Plus); not on DP-TPS-TX220 base model
- id: lw3_login
label: Login (LW3)
kind: action
command: "CALL /LOGIN:login(<password>)"
params:
- name: password
type: string
notes: Plus-only
- id: lw3_logout
label: Logout (LW3)
kind: action
command: "CALL /LOGIN:logout(<password>)"
params:
- name: password
type: string
notes: Plus-only
- id: lw3_login_enable
label: Enable/Disable Cleartext Login (LW3)
kind: action
command: "SET /LOGIN.LoginEnable=<login_state>"
params:
- name: login_state
type: string
notes: Plus-only
# ---- LW3: Video port ----
- id: lw3_video_source_status
label: Video Source Port Status (LW3)
kind: query
command: "GET /MEDIA/VIDEO/XP.SourcePortStatus"
params: []
- id: lw3_connected_source
label: Connected Source (LW3)
kind: query
command: "GET /MEDIA/VIDEO/<out>.ConnectedSource"
params:
- name: out
type: string
description: "O1/O2"
notes: Plus-only; FW v1.3.0b6+
- id: lw3_video_dest_status
label: Video Destination Port Status (LW3)
kind: query
command: "GET /MEDIA/VIDEO/XP.DestinationPortStatus"
params: []
- id: lw3_video_connection_list
label: Video Crosspoint Setting (LW3)
kind: query
command: "GET /MEDIA/VIDEO/XP.DestinationConnectionList"
params: []
- id: lw3_video_switch
label: Switch Video Input (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:switch(<in>:<out>)"
params:
- name: in
type: string
description: "I1.. ; 0=disconnect"
- name: out
type: string
description: "O1/O2"
- id: lw3_video_autoselect_query
label: Video Autoselect Settings (LW3)
kind: query
command: "GET /MEDIA/VIDEO/XP.DestinationPortAutoselect"
params: []
- id: lw3_video_autoselect_set
label: Set Video Autoselect Mode (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:setDestinationPortAutoselect(<out>:<as_state><as_mode>)"
params:
- name: out
type: string
- name: as_state
type: string
description: "E/D"
- name: as_mode
type: string
description: "F/P/L"
- id: lw3_video_priority_query
label: Video Input Port Priority (LW3)
kind: query
command: "GET /MEDIA/VIDEO/XP.PortPriorityList"
params: []
- id: lw3_video_priority_set
label: Set Video Input Port Priority (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:setAutoselectionPriority(<in>(<out>):<priority>)"
params:
- name: in
type: string
- name: out
type: string
- name: priority
type: integer
description: "0..30 (31=ignore)"
- id: lw3_video_mute_source
label: Mute Video Input (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:muteSource(<in>)"
params:
- name: in
type: string
- id: lw3_video_unmute_source
label: Unmute Video Input (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:unmuteSource(<in>)"
params:
- name: in
type: string
- id: lw3_video_lock_source
label: Lock Video Input (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:lockSource(<in>)"
params:
- name: in
type: string
- id: lw3_video_unlock_source
label: Unlock Video Input (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:unlockSource(<in>)"
params:
- name: in
type: string
- id: lw3_video_mute_dest
label: Mute Video Output (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:muteDestination(<out>)"
params:
- name: out
type: string
- id: lw3_video_unmute_dest
label: Unmute Video Output (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:unmuteDestination(<out>)"
params:
- name: out
type: string
- id: lw3_video_lock_dest
label: Lock Video Output (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:lockDestination(<out>)"
params:
- name: out
type: string
- id: lw3_video_unlock_dest
label: Unlock Video Output (LW3)
kind: action
command: "CALL /MEDIA/VIDEO/XP:unlockDestination(<out>)"
params:
- name: out
type: string
- id: lw3_hdcp_active
label: Query Incoming HDCP (LW3)
kind: query
command: "GET /MEDIA/VIDEO/<in>.HdcpActive"
params:
- name: in
type: string
- id: lw3_hdcp_enable_query
label: Query Input HDCP Setting (LW3)
kind: query
command: "GET /MEDIA/VIDEO/<in>.HdcpEnable"
params:
- name: in
type: string
- id: lw3_hdcp_enable_set
label: Set Input HDCP (LW3)
kind: action
command: "SET /MEDIA/VIDEO/<in>.HdcpEnable=<HDCP_setting>"
params:
- name: in
type: string
- name: HDCP_setting
type: string
description: "0/false, 1/true"
- id: lw3_hdcp_mode_query
label: Query Output HDCP Setting (LW3)
kind: query
command: "GET /MEDIA/VIDEO/<out>.HdcpModeSetting"
params:
- name: out
type: string
- id: lw3_hdcp_mode_set
label: Set Output HDCP Mode (LW3)
kind: action
command: "SET /MEDIA/VIDEO/<out>.HdcpModeSetting=<HDCP_setting>"
params:
- name: out
type: string
- name: HDCP_setting
type: string
- id: lw3_tpg_mode
label: Test Pattern Mode (LW3)
kind: action
command: "SET /MEDIA/VIDEO/<out>.TpgMode=<mode_setting>"
params:
- name: out
type: string
- name: mode_setting
type: integer
description: "0=disabled, 1=enabled, 2=no-signal mode"
- id: lw3_tpg_clock
label: Test Pattern Clock Source (LW3)
kind: action
command: "SET /MEDIA/VIDEO/<out>.TpgClockSource=<clk_freq>"
params:
- name: out
type: string
- name: clk_freq
type: string
description: "480 / 576 / EXT"
- id: lw3_tpg_pattern
label: Test Pattern (LW3)
kind: action
command: "SET /MEDIA/VIDEO/<out>.TpgPattern=<pattern>"
params:
- name: out
type: string
- name: pattern
type: string
description: "RED/GREEN/BLUE/BLACK/WHITE/RAMP/CHESS/BAR/CYCLE"
- id: lw3_hdmi_mode_query
label: Query HDMI Mode (LW3)
kind: query
command: "GET /MEDIA/VIDEO/<out>.HdmiModeSetting"
params:
- name: out
type: string
- id: lw3_hdmi_mode_set
label: Set HDMI Mode (LW3)
kind: action
command: "SET /MEDIA/VIDEO/<out>.HdmiModeSetting=<HDMI_mode>"
params:
- name: out
type: string
- name: HDMI_mode
type: integer
description: "0=Auto, 1=DVI, 2=HDMI"
- id: lw3_tps_mode_setting_query
label: Query TPS Mode Setting (LW3)
kind: query
command: "GET /REMOTE/D1.tpsModeSetting"
params: []
- id: lw3_tps_mode_setting_set
label: Set TPS Mode (LW3)
kind: action
command: "SET /REMOTE/D1.tpsModeSetting=<TPS_mode>"
params:
- name: TPS_mode
type: string
description: "A=Auto, H=HDBaseT, L=Long reach, 1=LPPF1, 2=LPPF2"
- id: lw3_tps_mode_query
label: Query Established TPS Mode (LW3)
kind: query
command: "GET /REMOTE/D1.tpsMode"
params: []
# ---- LW3: Audio port ----
- id: lw3_audio_source_status
label: Audio Source Port Status (LW3)
kind: query
command: "GET /MEDIA/AUDIO/XP.SourcePortStatus"
params: []
- id: lw3_audio_dest_status
label: Audio Destination Port Status (LW3)
kind: query
command: "GET /MEDIA/AUDIO/XP.DestinationPortStatus"
params: []
- id: lw3_audio_connection_list
label: Audio Crosspoint Setting (LW3)
kind: query
command: "GET /MEDIA/AUDIO/XP.DestinationConnectionList"
params: []
- id: lw3_audio_switch
label: Switch Audio Input (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:switch(<in>:<out>)"
params:
- name: in
type: string
- name: out
type: string
- id: lw3_audio_autoselect_query
label: Audio Autoselect Settings (LW3)
kind: query
command: "GET /MEDIA/AUDIO/XP.DestinationPortAutoselect"
params: []
- id: lw3_audio_autoselect_set
label: Set Audio Autoselect Mode (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:setDestinationPortAutoselect(<out>:<as_state><as_mode>)"
params:
- name: out
type: string
- name: as_state
type: string
- name: as_mode
type: string
description: "F/P/L/S (S=static follows video)"
- id: lw3_audio_priority_query
label: Audio Input Port Priority (LW3)
kind: query
command: "GET /MEDIA/AUDIO/XP.PortPriorityList"
params: []
- id: lw3_audio_priority_set
label: Set Audio Input Port Priority (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:setAutoselectionPriority(<in>(<out>):<priority>)"
params:
- name: in
type: string
- name: out
type: string
- name: priority
type: integer
- id: lw3_audio_mute_source
label: Mute Audio Input (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:muteSource(<in>)"
params:
- name: in
type: string
- id: lw3_audio_unmute_source
label: Unmute Audio Input (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:unmuteSource(<in>)"
params:
- name: in
type: string
- id: lw3_audio_lock_source
label: Lock Audio Input (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:lockSource(<in>)"
params:
- name: in
type: string
- id: lw3_audio_unlock_source
label: Unlock Audio Input (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:unlockSource(<in>)"
params:
- name: in
type: string
- id: lw3_audio_mute_dest
label: Mute Audio Output (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:muteDestination(<out>)"
params:
- name: out
type: string
- id: lw3_audio_unmute_dest
label: Unmute Audio Output (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:unmuteDestination(<out>)"
params:
- name: out
type: string
- id: lw3_audio_lock_dest
label: Lock Audio Output (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:lockDestination(<out>)"
params:
- name: out
type: string
- id: lw3_audio_unlock_dest
label: Unlock Audio Output (LW3)
kind: action
command: "CALL /MEDIA/AUDIO/XP:unlockDestination(<out>)"
params:
- name: out
type: string
- id: lw3_vol_db_query
label: Query Volume dB (LW3)
kind: query
command: "GET /MEDIA/AUDIO/<in>.VolumedB"
params:
- name: in
type: string
- id: lw3_vol_db_set
label: Set Volume dB (LW3)
kind: action
command: "SET /MEDIA/AUDIO/<in>.VolumedB=<level>"
params:
- name: in
type: string
- name: level
type: number
description: "-95.625 dB .. 0 dB, step -0.375 dB"
- id: lw3_vol_pct_query
label: Query Volume Percent (LW3)
kind: query
command: "GET /MEDIA/AUDIO/<in>.VolumePercent"
params:
- name: in
type: string
- id: lw3_vol_pct_set
label: Set Volume Percent (LW3)
kind: action
command: "SET /MEDIA/AUDIO/<in>.VolumePercent=<vol_percent>"
params:
- name: in
type: string
- name: vol_percent
type: number
description: "0..100, step 0.01"
- id: lw3_balance_query
label: Query Balance (LW3)
kind: query
command: "GET /MEDIA/AUDIO/<in>.Balance"
params:
- name: in
type: string
- id: lw3_balance_set
label: Set Balance (LW3)
kind: action
command: "SET /MEDIA/AUDIO/<in>.Balance=<level>"
params:
- name: in
type: string
- name: level
type: integer
description: "-100 (left) .. 100 (right); 0=center"
- id: lw3_gain_query
label: Query Gain (LW3)
kind: query
command: "GET /MEDIA/AUDIO/<in>.Gain"
params:
- name: in
type: string
- id: lw3_gain_set
label: Set Gain (LW3)
kind: action
command: "SET /MEDIA/AUDIO/<in>.Gain=<level>"
params:
- name: in
type: string
- name: level
type: number
description: "-12 .. 35.25 dB; default 0"
# ---- LW3: Event manager ----
- id: lw3_event_condition
label: Set Event Condition (LW3)
kind: action
command: "SET /EVENTS/E<loc>.Condition=<expression>"
params:
- name: loc
type: integer
description: event location
- name: expression
type: string
- id: lw3_event_condition_inverted
label: Set Event Condition Inverted (LW3)
kind: action
command: "SET /EVENTS/E<loc>.ConditionInverted=<true/false>"
params:
- name: loc
type: integer
- id: lw3_event_action
label: Set Event Action (LW3)
kind: action
command: "SET /EVENTS/E<loc>.Action=<expression>"
params:
- name: loc
type: integer
- name: expression
type: string
- id: lw3_event_timeout
label: Set Event Condition Timeout (LW3)
kind: action
command: "SET /EVENTS/E<loc>.ConditionTimeout=<time>"
params:
- name: loc
type: integer
- name: time
type: integer
description: seconds
- id: lw3_event_end_check
label: Set Event Condition End Check (LW3)
kind: action
command: "SET /EVENTS/E<loc>.ConditionEndCheck=<true/false>"
params:
- name: loc
type: integer
- id: lw3_event_timeout_cont
label: Set Event Condition Timeout Continuous (LW3)
kind: action
command: "SET /EVENTS/E<loc>.ConditionTimeoutContinuous=<true/false>"
params:
- name: loc
type: integer
- id: lw3_event_name
label: Set Event Name (LW3)
kind: action
command: "SET /EVENTS/E<loc>.Name=<string>"
params:
- name: loc
type: integer
- name: string
type: string
description: max 20 chars
- id: lw3_event_enabled
label: Enable/Disable Event (LW3)
kind: action
command: "SET /EVENTS/E<loc>.Enabled=<true/false>"
params:
- name: loc
type: integer
- id: lw3_event_trigger_condition
label: Trigger Condition (LW3)
kind: action
command: "CALL /EVENTS/E<loc>:triggerCondition(1)"
params:
- name: loc
type: integer
notes: Plus-only; FW v1.3.0b6+
- id: lw3_event_condition_count
label: Condition Counter (LW3)
kind: query
command: "GET /EVENTS/E<loc>.ConditionCount"
params:
- name: loc
type: integer
- id: lw3_event_ext_trigger_count
label: Condition Trigger Counter (LW3)
kind: query
command: "GET /EVENTS/E<loc>.ExternalConditionTriggerCount"
params:
- name: loc
type: integer
notes: Plus-only
- id: lw3_event_action_test
label: Test Event Action (LW3)
kind: action
command: "CALL /EVENTS/E<loc>:ActionTest(1)"
params:
- name: loc
type: integer
# ---- LW3: Variable management (Plus-only) ----
- id: lw3_var_value
label: Variable Value (LW3)
kind: action
command: "SET /CTRL/VARS/V<loc>.Value=<value>"
params:
- name: loc
type: integer
description: 1-30
- name: value
type: string
notes: Plus-only
- id: lw3_var_add
label: Variable Add (LW3)
kind: action
command: "CALL /CTRL/VARS/V<loc>:add(<operand>;<min>;<max>)"
params:
- name: loc
type: integer
- name: operand
type: integer
- name: min
type: integer
- name: max
type: integer
notes: Plus-only
- id: lw3_var_cycle
label: Variable Cycle (LW3)
kind: action
command: "CALL /CTRL/VARS/V<loc>:cycle(<operand>;<min>;<max>)"
params:
- name: loc
type: integer
- name: operand
type: integer
- name: min
type: integer
- name: max
type: integer
notes: Plus-only
- id: lw3_var_case
label: Variable Case (LW3)
kind: action
command: "CALL /CTRL/VARS/V<loc>:case(<min> <max> <val>;)"
params:
- name: loc
type: integer
- name: cases
type: string
notes: Plus-only
- id: lw3_var_scanf
label: Variable Scan (LW3)
kind: action
command: "CALL /CTRL/VARS/V<loc>:scanf(<path>.<property>;<pattern>)"
params:
- name: loc
type: integer
- name: path
type: string
- name: pattern
type: string
notes: Plus-only
- id: lw3_var_printf
label: Variable Printf (LW3)
kind: action
command: "CALL /CTRL/VARS/V<loc>:printf(<prefix>%s<postfix>)"
params:
- name: loc
type: integer
- name: format
type: string
notes: Plus-only
# ---- LW3: Network config ----
- id: lw3_dhcp_enable
label: Set DHCP State (LW3)
kind: action
command: "SET /MANAGEMENT/NETWORK.DhcpEnabled=<dhcp_status>"
params:
- name: dhcp_status
type: string
- id: lw3_apply_settings
label: Apply Network Settings (LW3)
kind: action
command: "CALL /MANAGEMENT/NETWORK:applySettings(1)"
params: []
- id: lw3_static_ip
label: Set Static IP (LW3)
kind: action
command: "SET /MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>"
params:
- name: IP_address
type: string
- id: lw3_static_netmask
label: Set Static Netmask (LW3)
kind: action
command: "SET /MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>"
params:
- name: netmask
type: string
- id: lw3_static_gateway
label: Set Static Gateway (LW3)
kind: action
command: "SET /MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>"
params:
- name: gw_address
type: string
- id: lw3_mac_filter_addr
label: MAC Filter Address (LW3)
kind: action
command: "SET /MANAGEMENT/MACFILTER.MACaddress<loc>=<MAC_address>;<receive>;<send>;<name>"
params:
- name: loc
type: integer
description: 1-8
- name: MAC_address
type: string
- name: receive
type: string
- name: send
type: string
- name: name
type: string
notes: Plus-only
- id: lw3_mac_filter_enable
label: MAC Filter Enable (LW3)
kind: action
command: "SET /MANAGEMENT/MACFILTER.FilterEnable=<bool>"
params:
- name: bool
type: string
notes: Plus-only
- id: lw3_lw2_port_block
label: LW2 Control Port Blocking (LW3)
kind: action
command: "SET /MANAGEMENT/SERVICEFILTER.Lw2Enabled=<port_mode>"
params:
- name: port_mode
type: string
- id: lw3_http_port_block
label: HTTP Port Blocking (LW3)
kind: action
command: "SET /MANAGEMENT/SERVICEFILTER.HttpEnabled=<port_mode>"
params:
- name: port_mode
type: string
- id: lw3_wake_on_lan
label: Wake-on-LAN (LW3)
kind: action
command: "CALL /MEDIA/ETHERNET:wakeOnLan(MAC_address)"
params:
- name: MAC_address
type: string
notes: FW v1.3.0b6+
- id: lw3_hostname
label: Set Host Name (LW3)
kind: action
command: "SET /MANAGEMENT/NETWORK.HostName=<unique_name>"
params:
- name: unique_name
type: string
description: 1-64 chars
# ---- LW3: Ethernet message sending ----
- id: lw3_tcp_message
label: Send TCP Message ASCII (LW3)
kind: action
command: "CALL /MEDIA/ETHERNET:tcpMessage(<IP_address>:<port_no>=<message>)"
params:
- name: IP_address
type: string
- name: port_no
type: integer
- name: message
type: string
- id: lw3_tcp_text
label: Send TCP Text (LW3)
kind: action
command: "CALL /MEDIA/ETHERNET:tcpText(<IP_address>:<port_no>=<text>)"
params:
- name: IP_address
type: string
- name: port_no
type: integer
- name: text
type: string
- id: lw3_tcp_binary
label: Send TCP Binary HEX (LW3)
kind: action
command: "CALL /MEDIA/ETHERNET:tcpBinary(<IP_address>:<port_no>=<HEX_message>)"
params:
- name: IP_address
type: string
- name: port_no
type: integer
- name: HEX_message
type: string
- id: lw3_udp_message
label: Send UDP Message ASCII (LW3)
kind: action
command: "CALL /MEDIA/ETHERNET:udpMessage(<IP_address>:<port_no>=<message>)"
params:
- name: IP_address
type: string
- name: port_no
type: integer
- name: message
type: string
- id: lw3_udp_text
label: Send UDP Text (LW3)
kind: action
command: "CALL /MEDIA/ETHERNET:udpText(<IP_address>:<port_no>=<text>)"
params:
- name: IP_address
type: string
- name: port_no
type: integer
- name: text
type: string
- id: lw3_udp_binary
label: Send UDP Binary HEX (LW3)
kind: action
command: "CALL /MEDIA/ETHERNET:udpBinary(<IP_address>:<port_no>=<HEX_message>)"
params:
- name: IP_address
type: string
- name: port_no
type: integer
- name: HEX_message
type: string
# ---- LW3: HTTP messaging (Plus-only) ----
- id: lw3_http_server_ip
label: HTTP Target IP (LW3)
kind: action
command: "SET /CTRL/HTTP/C1.ServerIP=<IP_address>"
params:
- name: IP_address
type: string
notes: Plus-only
- id: lw3_http_server_port
label: HTTP Target Port (LW3)
kind: action
command: "SET /CTRL/HTTP/C1.ServerPort=<port_no>"
params:
- name: port_no
type: integer
notes: Plus-only
- id: lw3_http_file
label: HTTP Target Path (LW3)
kind: action
command: "SET /CTRL/HTTP/C1.File=<path>"
params:
- name: path
type: string
notes: Plus-only
- id: lw3_http_header
label: HTTP Message Header (LW3)
kind: action
command: "SET /CTRL/HTTP/C1.Header=<header_text>"
params:
- name: header_text
type: string
notes: Plus-only
- id: lw3_http_post
label: HTTP Post (LW3)
kind: action
command: "CALL /CTRL/HTTP/C1:post(<body_text>)"
params:
- name: body_text
type: string
notes: Plus-only
- id: lw3_http_put
label: HTTP Put (LW3)
kind: action
command: "CALL /CTRL/HTTP/C1:put(<body_text>)"
params:
- name: body_text
type: string
notes: Plus-only
# ---- LW3: TCP message recognizer (Plus-only) ----
- id: lw3_tcp_rec_server_ip
label: TCP Recognizer Server IP (LW3)
kind: action
command: "SET /CTRL/TCP/C<loc>.ServerIP(<IP_address>)"
params:
- name: loc
type: integer
description: 1-3
- name: IP_address
type: string
notes: Plus-only
- id: lw3_tcp_rec_server_port
label: TCP Recognizer Server Port (LW3)
kind: action
command: "SET /CTRL/TCP/C<loc>.ServerPort(<port_no>)"
params:
- name: loc
type: integer
- name: port_no
type: integer
notes: Plus-only
- id: lw3_tcp_rec_connect
label: TCP Recognizer Connect (LW3)
kind: action
command: "CALL /CTRL/TCP/C<loc>:connect()"
params:
- name: loc
type: integer
notes: Plus-only
- id: lw3_tcp_rec_disconnect
label: TCP Recognizer Disconnect (LW3)
kind: action
command: "CALL /CTRL/TCP/C<loc>:disconnect()"
params:
- name: loc
type: integer
notes: Plus-only
- id: lw3_tcp_rec_delimiter
label: TCP Recognizer Delimiter Hex (LW3)
kind: action
command: "SET /CTRL/TCP/C<loc>.DelimiterHex=<delimiter>"
params:
- name: loc
type: integer
- name: delimiter
type: string
notes: Plus-only
- id: lw3_tcp_rec_timeout
label: TCP Recognizer Timeout (LW3)
kind: action
command: "SET /CTRL/TCP/C<loc>.TimeOut=<timeout>"
params:
- name: loc
type: integer
- name: timeout
type: integer
description: ms, min 10, 0=disabled
notes: Plus-only
- id: lw3_tcp_rec_rx
label: TCP Recognizer Rx (LW3)
kind: query
command: "GET /CTRL/TCP/C<loc>.Rx"
params:
- name: loc
type: integer
notes: Plus-only
- id: lw3_tcp_rec_rxhex
label: TCP Recognizer Rx Hex (LW3)
kind: query
command: "GET /CTRL/TCP/C<loc>.RxHex"
params:
- name: loc
type: integer
notes: Plus-only
- id: lw3_tcp_rec_clear
label: TCP Recognizer Clear (LW3)
kind: action
command: "CALL /CTRL/TCP/C<loc>:clear()"
params:
- name: loc
type: integer
notes: Plus-only
- id: lw3_tcp_rec_active_rx
label: TCP Recognizer Active Rx (LW3)
kind: query
command: "GET /CTRL/TCP/C<loc>.ActiveRx"
params:
- name: loc
type: integer
notes: Plus-only
- id: lw3_tcp_rec_active_rxhex
label: TCP Recognizer Active Rx Hex (LW3)
kind: query
command: "GET /CTRL/TCP/C<loc>.ActiveRxHex"
params:
- name: loc
type: integer
notes: Plus-only
- id: lw3_tcp_rec_active_timeout
label: TCP Recognizer Active Timeout (LW3)
kind: action
command: "SET /CTRL/TCP/C<loc>.ActivePropertyTimeout=<a_timeout>"
params:
- name: loc
type: integer
- name: a_timeout
type: integer
description: ms 0-255, default 50
notes: Plus-only
- id: lw3_tcp_rec_action_trigger
label: TCP Recognizer Action Trigger (LW3)
kind: action
command: "SET /CTRL/TCP/C<loc>.ActionTrigger=<event_nr>"
params:
- name: loc
type: integer
- name: event_nr
type: integer
notes: Plus-only
# ---- LW3: RS-232 port config ----
- id: lw3_uart_control_protocol
label: UART Control Protocol (LW3)
kind: action
command: "SET /MEDIA/UART/<port>.ControlProtocol=<protocol>"
params:
- name: port
type: string
description: "P1 (local) / P2 (TPS link)"
- name: protocol
type: integer
description: "0=LW2, 1=LW3"
- id: lw3_uart_baud
label: UART Baud Rate (LW3)
kind: action
command: "SET /MEDIA/UART/<port>.BaudRate=<baud_rate>"
params:
- name: port
type: string
- name: baud_rate
type: integer
description: "0:4800,1:7200,2:9600,3:14400,4:19200,5:38400,6:57600,7:115200"
- id: lw3_uart_databits
label: UART Data Bits (LW3)
kind: action
command: "SET /MEDIA/UART/<port>.DataBits=<data_bits>"
params:
- name: port
type: string
- name: data_bits
type: integer
description: "8 or 9"
- id: lw3_uart_stopbits
label: UART Stop Bits (LW3)
kind: action
command: "SET /MEDIA/UART/<port>.StopBits=<stop_bits>"
params:
- name: port
type: string
- name: stop_bits
type: integer
description: "0:1, 1:1.5, 2:2"
- id: lw3_uart_parity
label: UART Parity (LW3)
kind: action
command: "SET /MEDIA/UART/<port>.Parity=<parity_value>"
params:
- name: port
type: string
- name: parity_value
type: integer
description: "0:none, 1:odd, 2:even"
- id: lw3_uart_mode
label: UART RS-232 Operation Mode (LW3)
kind: action
command: "SET /MEDIA/UART/<port>.Rs232Mode=<mode>"
params:
- name: port
type: string
- name: mode
type: integer
description: "0:Pass-through, 1:Control, 2:Command injection"
- id: lw3_uart_ci_enable
label: UART Command Injection Enable (LW3)
kind: action
command: "SET /MEDIA/UART/<port>.CommandInjectionEnable=<CI_set>"
params:
- name: port
type: string
- name: CI_set
type: string
description: "1/true to enable"
# ---- LW3: RS-232 message sending ----
- id: lw3_uart_send_message
label: Send RS-232 Message ASCII (LW3)
kind: action
command: "CALL /MEDIA/UART/P1:sendMessage(<message>)"
params:
- name: message
type: string
- id: lw3_uart_send_text
label: Send RS-232 Text (LW3)
kind: action
command: "CALL /MEDIA/UART/P1:sendText(<message>)"
params:
- name: message
type: string
- id: lw3_uart_send_binary
label: Send RS-232 Binary HEX (LW3)
kind: action
command: "CALL /MEDIA/UART/P1:sendBinaryMessage(<message>)"
params:
- name: message
type: string
# ---- LW3: RS-232 message recognizer (Plus-only) ----
- id: lw3_rs232_rec_enable
label: RS-232 Recognizer Enable (LW3)
kind: action
command: "SET /MEDIA/UART/<serial_port>.RecognizerEnable=<recognizer_enable>"
params:
- name: serial_port
type: string
description: "P1/P2"
- name: recognizer_enable
type: string
notes: Plus-only
- id: lw3_rs232_rec_delimiter
label: RS-232 Recognizer Delimiter (LW3)
kind: action
command: "SET /MEDIA/UART/RECOGNIZER.DelimiterHex=<delimiter>"
params:
- name: delimiter
type: string
notes: Plus-only
- id: lw3_rs232_rec_timeout
label: RS-232 Recognizer Timeout (LW3)
kind: action
command: "SET /MEDIA/UART/RECOGNIZER.TimeOut=<timeout>"
params:
- name: timeout
type: integer
description: ms, min 10
notes: Plus-only
- id: lw3_rs232_rec_rx
label: RS-232 Recognizer Rx (LW3)
kind: query
command: "GET /MEDIA/UART/RECOGNIZER.Rx"
params: []
notes: Plus-only
- id: lw3_rs232_rec_rxhex
label: RS-232 Recognizer Rx Hex (LW3)
kind: query
command: "GET /MEDIA/UART/RECOGNIZER.RxHex"
params: []
notes: Plus-only
- id: lw3_rs232_rec_clear
label: RS-232 Recognizer Clear (LW3)
kind: action
command: "CALL /MEDIA/UART/RECOGNIZER:clear()"
params: []
notes: Plus-only
- id: lw3_rs232_rec_active_rx
label: RS-232 Recognizer Active Rx (LW3)
kind: query
command: "GET /MEDIA/UART/RECOGNIZER.ActiveRx"
params: []
notes: Plus-only
- id: lw3_rs232_rec_active_rxhex
label: RS-232 Recognizer Active Rx Hex (LW3)
kind: query
command: "GET /MEDIA/UART/RECOGNIZER.ActiveRxHex"
params: []
notes: Plus-only
- id: lw3_rs232_rec_active_timeout
label: RS-232 Recognizer Active Timeout (LW3)
kind: action
command: "SET /MEDIA/UART/RECOGNIZER.ActivePropertyTimeout=<a_timeout>"
params:
- name: a_timeout
type: integer
description: ms 0-255, default 50
notes: Plus-only
# ---- LW3: CEC (Plus-only) ----
- id: lw3_cec_send_click
label: CEC Press&Release (LW3)
kind: action
command: "CALL /MEDIA/CEC/<port>:sendClick(<command>)"
params:
- name: port
type: string
description: "I1-I4 / O1-O2"
- name: command
type: string
description: "e.g. ok, up, down, play, power_on, etc."
notes: Plus-only; FW v1.3.0b6+
- id: lw3_cec_send
label: CEC Send (LW3)
kind: action
command: "CALL /MEDIA/CEC/<port>:send(<command>)"
params:
- name: port
type: string
- name: command
type: string
description: "image_view_on, standby, active_source, give_power_status, etc."
notes: Plus-only
- id: lw3_cec_osd_string
label: CEC OSD String (LW3)
kind: action
command: "SET /MEDIA/CEC/<port>.OsdString=<text>"
params:
- name: port
type: string
- name: text
type: string
description: max 14 chars
notes: Plus-only
- id: lw3_cec_send_hex
label: CEC Send Hex (LW3)
kind: action
command: "CALL /MEDIA/CEC/<port>:sendHex(<hex_code>)"
params:
- name: port
type: string
- name: hex_code
type: string
description: max 30 chars (15 bytes)
notes: Plus-only
- id: lw3_cec_last_received
label: Last Received CEC Message (LW3)
kind: query
command: "GET /MEDIA/CEC/<port>.LastReceivedMessage"
params:
- name: port
type: string
notes: Plus-only
# ---- LW3: IR ----
- id: lw3_ir_ci_enable
label: IR Command Injection Enable (LW3)
kind: action
command: "SET /MEDIA/IR/<port>.CommandInjectionEnable=<CI_set>"
params:
- name: port
type: string
- name: CI_set
type: string
- id: lw3_ir_modulation
label: IR Output Modulation Enable (LW3)
kind: action
command: "SET /MEDIA/IR/<out>.EnableModulation=<mod_set>"
params:
- name: out
type: string
- name: mod_set
type: string
- id: lw3_ir_send_pronto
label: Send Pronto Hex via IR (LW3)
kind: action
command: "CALL /MEDIA/IR/D1:sendProntoHex(<hex_code>)"
params:
- name: hex_code
type: string
description: little-endian pronto hex, max 765 chars
# ---- LW3: GPIO ----
- id: lw3_gpio_direction
label: GPIO Pin Direction (LW3)
kind: action
command: "SET /MEDIA/GPIO/<port>.Direction(<dir>)"
params:
- name: port
type: string
- name: dir
type: string
description: "I=input, O=output"
- id: lw3_gpio_output
label: GPIO Pin Output Level (LW3)
kind: action
command: "SET /MEDIA/GPIO/<port>.Output(<value>)"
params:
- name: port
type: string
- name: value
type: string
description: "H=high, L=low"
- id: lw3_gpio_toggle
label: GPIO Toggle (LW3)
kind: action
command: "CALL /MEDIA/GPIO/<port>:toggle()"
params:
- name: port
type: string
# ---- LW3: EDID management ----
- id: lw3_edid_status
label: Emulated EDIDs (LW3)
kind: query
command: "GET /EDID.EdidStatus"
params: []
- id: lw3_edid_validity
label: Dynamic EDID Validity (LW3)
kind: query
command: "GET /EDID/D/<loc>.Validity"
params:
- name: loc
type: string
description: "D1-D#"
- id: lw3_edid_resolution
label: User EDID Preferred Resolution (LW3)
kind: query
command: "GET /EDID/U/<loc>.PreferredResolution"
params:
- name: loc
type: string
description: "U1-U#"
- id: lw3_edid_switch
label: Emulate EDID on Input Port (LW3)
kind: action
command: "CALL /EDID:switch(<source>:<destination>)"
params:
- name: source
type: string
description: "D#/U#/F#"
- name: destination
type: string
description: "E1-E#"
- id: lw3_edid_switch_all
label: Emulate EDID to All Inputs (LW3)
kind: action
command: "CALL /EDID:switchAll(<source>)"
params:
- name: source
type: string
- id: lw3_edid_copy
label: Copy EDID to User Memory (LW3)
kind: action
command: "CALL /EDID:copy(<source>:<user_mem>)"
params:
- name: source
type: string
- name: user_mem
type: string
description: "U1-U#"
- id: lw3_edid_delete
label: Delete EDID from User Memory (LW3)
kind: action
command: "CALL /EDID:delete(<user_mem>)"
params:
- name: user_mem
type: string
- id: lw3_edid_reset
label: Reset Emulated EDIDs (LW3)
kind: action
command: "CALL /EDID:reset()"
params: []
Feedbacks
# Port status response codes (5-char ASCII, first char mute/lock state + 2-byte HEX)
- id: video_source_port_status
type: string
description: "Per input port: T=unlocked/unmuted, M=muted, L=locked, U=locked+muted + 4-hex (audio/HDCP/signal/connection)"
- id: audio_source_port_status
type: string
description: "Per input port: T/M/L/U + 4-hex (signal/connection)"
# UNRESOLVED: full enum tables for every query response not exhaustively enumerated
Variables
# Analog audio input adjustable parameters
- id: volume_db
type: number
range: "-95.625 .. 0 dB, step -0.375 dB"
- id: volume_percent
type: number
range: "0 .. 100 %, step 0.01 %"
- id: balance
type: integer
range: "-100 .. 100 (0=center)"
- id: gain
type: number
range: "-12 .. 35.25 dB (default 0)"
# Custom user variables (/CTRL/VARS/V1..V30) are Plus-only; omitted from base TX220.
Events
# LW3 change notifications (CHG prefix) generated on subscribed node property changes.
# Example: «CHG /EDID.EdidStatus=F48:E1
# Subscriptions via OPEN / CLOSE on node paths; per-connection, cleared on disconnect.
# UNRESOLVED: full list of notifiable property paths not exhaustively enumerated in source.
Macros
# Macros stored on device; runnable via LW3 CALL /CTRL/MACROS:run(<name>) (Plus-only).
# LW2/LW3 batch command salvo over HTTP supported: post to <IP>/protocol.lw3.
# UNRESOLVED: macro authoring syntax / storage commands not detailed in source.
Safety
confirmation_required_for: []
interlocks: []
# UNRESOLVED: source contains no explicit safety/interlock warnings or power-on
# sequencing requirements for this model. GPIO max-total-current note (180 mA) is
# electrical, not a control interlock.
Notes
- Device = DP-TPS-TX220 (DisplayPort in, TPS/HDBaseT out O1 + HDMI out O2). Audio in (analog) = I2.
- Two control protocols: LW2 (legacy, RAW over TCP 10001, or RS-232; commands in
{}; responses in()) and LW3 (tree-based, CrLf-terminated, over TCP 6107 or RS-232). RS-232 Control mode default protocol = LW2. - RS-232 connector: 3-pole Phoenix (local = P1; TPS link serial = P2). RS-232 op-mode (Pass-through / Control / Command Injection) mirrored on local+link ports.
- Default serial config (factory): 57600 8N1, LW2, Pass-through mode, Command Injection enabled (CI ports 8001 local / 8002 TPS).
- Default network: IP 192.168.0.100/24, GW 192.168.0.1, DHCP off.
- Many advanced features (Cleartext Login, Variables, TCP/RS-232 Recognizers, HTTP messaging, CEC, ConnectedSource query, MAC filter, macro run) are documented as SW4-TPS-TX240-Plus only — these are tagged
notes: Plus-onlyin Actions; they may NOT be available on the base DP-TPS-TX220. Verify against a real device before relying on them. - TPS modes: Auto / HDBaseT / Long reach / LPPF1 (RS-232 @9600 only) / LPPF2 (RS-232 @9600 + Ethernet).
Provenance
source_domains:
- assets.prod.pim.lightware.com
source_urls:
- https://assets.prod.pim.lightware.com/assets/File-Downloads/Guides-and-Manuals/User-Manual/HTML/HDMI-TPS-TX200_series/UM.html
retrieved_at: 2026-07-31T11:16:20.042Z
last_checked_at: 2026-10-07T12:45:35.266Z
Verification Summary
verdict: verified
checked_at: 2026-10-07T12:45:35.266Z
matched_actions: 198
action_count: 198
confidence: medium
summary: "All 198 action units match source commands and transport values are supported. The source names the DP-TPS-TX220 and the spec flags Plus-only commands. Source typos on 3 commands were silently corrected. (9 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- OPEN
- CLOSE
- GETALL
- MAN
- "exact hardware variant features (Plus-only vs base TX220) for several advanced commands are model-gated; GPIO electrical levels and full FW-compat matrix not in scope of this spec."
- "not stated in source"
- "full enum tables for every query response not exhaustively enumerated"
- "full list of notifiable property paths not exhaustively enumerated in source."
- "macro authoring syntax / storage commands not detailed in source."
- "source contains no explicit safety/interlock warnings or power-on"
- "firmware version compatibility ranges per command not fully stated (some gated to FW v1.2.0b14 / v1.3.0b3 / v1.3.0b6)."
- "GPIO flow_control-style handshake not documented for RS-232."
- "exact Plus vs base feature set for DP-TPS-TX220 not disambiguated in source."
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0