AI4AVSummary
RS-232 and Telnet (TCP/9761) control for LG L Series TVs. Spec covers power, aspect, picture/sound tuning, channel tune, input select, IR-key emulation, 3D modes, energy saving, and remote-lock. Applies to L Series; many features model-dependent.
Transport
protocols:
- serial
- tcp
serial:
baud_rate: 9600
data_bits: 8
parity: none
stop_bits: 1
flow_control: none
encoding: ascii
cable: crossed-reverse
addressing:
port: 9761 # Telnet service port for Network IP Control
auth:
type: none # inferred for serial: no auth procedure in source
# Network IP control requires 3-digit password (default 828) to enable in Settings menu,
# but the established telnet session itself uses no per-command auth.
Traits
- powerable # inferred from Power (ka) and POWER commands
- routable # inferred from Input select (xb) and INPUT_SELECT commands
- queryable # inferred from "FF" read-data convention across all commands
- levelable # inferred from Volume/Bass/Treble/Balance/Contrast/Brightness/Color/Tint/Sharpness/Backlight/ColorTemp commands
- lockable # inferred from Remote Control Lock Mode (km) / REMOTECONTROLER_LOCK
Actions
# ============================================================
# RS-232 command set (UART, 9600 8N1, ASCII, terminated by CR 0x0D)
# Frame: [Cmd1][Cmd2][ ][SetID_hex][ ][Data][Cr]
# SetID: 0x00 = broadcast, 0x01-0x63 = 1..99 (decimal)
# Response: [Cmd2][ ][SetID][ ][OK|NG][Data][x] (x = ASCII 0x78)
# "FF" data byte = read/query current state.
# ============================================================
- id: power
label: Power
kind: action
transport: serial
command: "ka {setid} {data}\r"
params:
- {name: setid, type: hex_byte, description: "Set ID 0x00-0x63 (0x00 = broadcast)"}
- {name: data, type: enum, values: ["00", "01", "FF"], description: "00=off, 01=on, FF=query"}
notes: "Query returns 'a [SetID] OK [Data]x'. With RS-232 cable works in standby; USB-to-serial works only when TV on."
- id: aspect_ratio
label: Aspect Ratio (Main Picture)
kind: action
transport: serial
command: "kc {setid} {data}\r"
params:
- {name: setid, type: hex_byte, description: "Set ID 0x00-0x63"}
- {name: data, type: enum, values: ["01", "02", "04", "05", "06", "07", "09", "0B", "0C", "10-1F", "FF"], description: "01=4:3, 02=16:9, 04=Zoom, 05=Zoom2, 06=Set by Program/Original, 07=14:9, 09=Just Scan, 0B=Full Wide, 0C=21:9, 10-1F=Cinema Zoom 1-16, FF=query"}
- id: screen_mute
label: Screen Mute
kind: action
transport: serial
command: "kd {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: enum, values: ["00", "01", "10", "FF"], description: "00=off, 01=screen mute on, 10=video mute on, FF=query"}
- id: volume_mute
label: Volume Mute
kind: action
transport: serial
command: "ke {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: enum, values: ["00", "01", "FF"], description: "00=mute on, 01=mute off, FF=query"}
- id: volume_control
label: Volume Control
kind: action
transport: serial
command: "kf {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 (or FF=query)"}
- id: contrast
label: Contrast
kind: action
transport: serial
command: "kg {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 or FF=query"}
- id: brightness
label: Brightness
kind: action
transport: serial
command: "kh {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 or FF=query"}
- id: color
label: Color/Colour
kind: action
transport: serial
command: "ki {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 or FF=query"}
- id: tint
label: Tint
kind: action
transport: serial
command: "kj {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 (Red 00 → Green 64) or FF=query"}
notes: "Ack uses 'r' as command2 char, not 'j'. Source line 304: 'Ack [r][ ][Set ID][ ][OK/NG][Data][x]'."
- id: sharpness
label: Sharpness
kind: action
transport: serial
command: "kk {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-32 or FF=query"}
- id: osd_select
label: OSD Select
kind: action
transport: serial
command: "kl {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: enum, values: ["00", "01", "FF"], description: "00=off, 01=on, FF=query"}
- id: remote_lock
label: Remote Control Lock Mode
kind: action
transport: serial
command: "km {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: enum, values: ["00", "01"], description: "00=lock off, 01=lock on"}
notes: "Releases on main power cycle (20-30 s). In standby with key lock on, TV ignores IR power-on."
- id: treble
label: Treble
kind: action
transport: serial
command: "kr {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 or FF=query"}
- id: bass
label: Bass
kind: action
transport: serial
command: "ks {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 or FF=query"}
- id: balance
label: Balance
kind: action
transport: serial
command: "kt {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 or FF=query"}
- id: color_temperature
label: Color Temperature
kind: action
transport: serial
command: "xu {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 or FF=query"}
- id: ism_method
label: ISM Method (Plasma only)
kind: action
transport: serial
command: "jp {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: enum, values: ["02", "08", "20"], description: "02=Orbiter, 08=Normal, 20=Color Wash"}
- id: equalizer
label: Equalizer
kind: action
transport: serial
command: "jv {setid} {d0} {d1}\r"
params:
- {name: setid, type: hex_byte}
- {name: d0, type: hex_byte, description: "MSB nibble = band select (1-5 in bits 7-5, lower 5 bits 0)"}
- {name: d1, type: hex_byte, description: "LSB byte = step (00-19 decimal, see source table for band/step bit layout)"}
notes: "Band/step encoding is non-trivial. Source lines 403-413: bits 7-5 = band (000=1st, 001=2nd, 010=3rd, 011=4th, 100=5th); lower 5 bits of byte = step (0-20)."
- id: energy_saving
label: Energy Saving
kind: action
transport: serial
command: "jq {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: enum, values: ["00", "01", "02", "03", "04", "05"], description: "00=Off, 01=Min, 02=Med, 03=Max, 04=Auto/Intelligent sensor, 05=Screen off"}
- id: tune_command
label: Tune Command
kind: action
transport: serial
command: "ma {setid} {d0} {d1} {d2} {d3} {d4} {d5}\r"
params:
- {name: setid, type: hex_byte, description: "Often 00 (broadcast) for tune"}
- {name: d0, type: hex_byte, description: "Physical channel high byte (or 00 if not used)"}
- {name: d1, type: hex_byte, description: "Physical/Channel low byte, or Major channel high byte"}
- {name: d2, type: hex_byte, description: "Major channel low byte OR Input Source analog (00=ATV, 80=CATV)"}
- {name: d3, type: hex_byte, description: "Minor channel high byte"}
- {name: d4, type: hex_byte, description: "Minor channel low byte"}
- {name: d5, type: hex_byte, description: "Input Source (00=ATV, 01=CATV, 02=DTV-Antenna w/Physical, 06=CADTV w/Physical, 22=DTV-Antenna no Physical, 26=CADTV no Physical, 40=Satellite DTV, 46=CADTV one-part w/Physical/Major, 66=CADTV one-part Major only, 07=BS, 10=DVB-T)"}
notes: "Frame layout varies by region (Korea/Americas vs Europe/Asia vs Japan). Source examples: ma 00 00 0a 00 (analog PAL ch10), ma 00 00 01 10 (DVB-T ch1), ma 00 03 E8 40 (DVB-S ch1000)."
- id: channel_add_del
label: Channel Add/Del (Skip)
kind: action
transport: serial
command: "mb {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: enum, values: ["00", "01"], description: "00=Del(ATSC/ISDB)/Skip(DVB), 01=Add"}
- id: key
label: IR Remote Key
kind: action
transport: serial
command: "mc {setid} {keycode}\r"
params:
- {name: setid, type: hex_byte}
- {name: keycode, type: hex_byte, description: "IR key code. Source-defined enum: 00=CH+, 01=CH-, 02=Vol+, 03=Vol-, 06=Right, 07=Left, 08=Power, 09=Mute, 0B=Input, 0E=Sleep, 0F=TV, 10-19=Number 0-9, 1A=Q.View/Flashback, 1E=FAV, 20=Teletext, 21=T.Opt, 28=Return(BACK), 30=AV Mode, 39=Caption/Subtitle, 40=Up, 41=Down, 42=My Apps, 43=Menu/Settings, 44=OK, 45=Q.Menu, 4C=List (ATSC only), 4D=PICTURE, 52=SOUND, 53=List, 5B=Exit, 60=PIP(AD), 61=Blue, 63=Yellow, 71=Green, 72=Red, 79=Ratio/Aspect, 91=AD, 9E=Live Menu, 7A=User Guide, 7C=Smart/Home, 7E=SIMPLINK, 8E=Forward, 8F=Rewind, AA=Info, AB=Program Guide, B0=Play, B1=Stop/File List, BA=Freeze/Slow/Pause, BB=Soccer, BD=REC, DC=3D, 99=AutoConfig, 9F=App/*, 9B=TV/PC"}
notes: "This command works in standby (unlike most others). 'ka' also works in standby with RS-232 cable."
- id: backlight
label: Backlight / Panel Light
kind: action
transport: serial
command: "mg {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: hex_byte, description: "00-64 or FF=query"}
notes: "LCD/LED = backlight; Plasma = panel light."
- id: input_select
label: Input Select (Main Picture)
kind: action
transport: serial
command: "xb {setid} {data}\r"
params:
- {name: setid, type: hex_byte}
- {name: data, type: enum, values: ["00", "01", "02", "03", "04", "10", "11", "20", "21", "40", "41", "60", "90", "91", "92", "93"], description: "00=DTV, 01=CADTV, 02=Satellite DTV, 03=ISDB-CS1, 04=ISDB-CS2, 10=ATV, 11=CATV, 20=AV/AV1, 21=AV2, 40=Component1, 41=Component2, 60=RGB, 90=HDMI1, 91=HDMI2, 92=HDMI3, 93=HDMI4"}
- id: threed_mode
label: 3D Mode (3D models only)
kind: action
transport: serial
command: "xt {setid} {d0} {d1} {d2} {d3}\r"
params:
- {name: setid, type: hex_byte}
- {name: d0, type: enum, values: ["00", "01", "02", "03"], description: "00=3D On, 01=3D Off, 02=3D→2D, 03=2D→3D"}
- {name: d1, type: enum, values: ["00", "01", "02", "03", "04", "05"], description: "00=Top-Bottom, 01=Side-by-Side, 02=Check Board, 03=Frame Sequential, 04=Column interleaving, 05=Row interleaving"}
- {name: d2, type: enum, values: ["00", "01"], description: "00=Right→Left, 01=Left→Right"}
- {name: d3, type: hex_byte, description: "3D Effect/Depth: 00-14 hex"}
notes: "d1/d2/d3 ignored if d0=01 or 02. d1/d2 ignored if d0=03. d3 only meaningful when 3D Mode Genre=Manual."
- id: threed_extended
label: Extended 3D (3D models only)
kind: action
transport: serial
command: "xv {setid} {d0} {d1}\r"
params:
- {name: setid, type: hex_byte}
- {name: d0, type: enum, values: ["00", "01", "02", "06", "07", "08", "09"], description: "00=3D Picture Correction, 01=3D Depth, 02=3D Viewpoint, 06=3D Color Correction, 07=3D Sound Zooming, 08=Normal Image View, 09=3D Mode (Genre)"}
- {name: d1, type: hex_byte, description: "Range depends on d0 (see notes)"}
notes: "d0=00: 00=R→L, 01=L→R. d0=01 or 02: 00-14 hex (auto-maps 0-20 decimal to -10..+10). d0=06 or 07: 00=off, 01=on. d0=08: 00=revert 3D from 3D-to-2D, 01=3D→2D. d0=09: 00=Standard, 01=Sport, 02=Cinema, 03=Extreme, 04=Manual, 05=Auto."
- id: auto_configure
label: Auto Configure (RGB/PC mode only)
kind: action
transport: serial
command: "ju {setid} 01\r"
params:
- {name: setid, type: hex_byte}
notes: "Adjusts picture position and minimizes image shaking. Only in RGB (PC) input."
# ============================================================
# Network IP Control (TCP/Telnet, port 9761)
# Frame: text command terminated by Enter; response: "OK" or "NG" on success/fail.
# "quit" closes session. 3-digit password (default 828) required to enable in Settings.
# ============================================================
- id: power_ip
label: Power
kind: action
transport: tcp
command: "POWER {state}"
params:
- {name: state, type: enum, values: ["on", "off"]}
- id: aspect_ratio_ip
label: Aspect Ratio
kind: action
transport: tcp
command: "ASPECT_RATIO {mode}"
params:
- {name: mode, type: enum, values: ["4by3", "16by9", "setbyoriginal"]}
- id: screen_mute_ip
label: Screen Mute
kind: action
transport: tcp
command: "SCREEN_MUTE {mode}"
params:
- {name: mode, type: enum, values: ["screenmuteon", "videomuteon", "allmuteoff"]}
- id: volume_mute_ip
label: Volume Mute
kind: action
transport: tcp
command: "VOLUME_MUTE {state}"
params:
- {name: state, type: enum, values: ["on", "off"]}
- id: volume_control_ip
label: Volume Control
kind: action
transport: tcp
command: "VOLUME_CONTROL {level}"
params:
- {name: level, type: integer, description: "0-100 decimal"}
- id: contrast_ip
label: Contrast
kind: action
transport: tcp
command: "PICTURE_CONTRAST {value}"
params:
- {name: value, type: integer, description: "0-100 decimal"}
- id: brightness_ip
label: Brightness
kind: action
transport: tcp
command: "PICTURE_BRIGHTNESS {value}"
params:
- {name: value, type: integer, description: "0-100 decimal"}
- id: color_ip
label: Color
kind: action
transport: tcp
command: "PICTURE_COLOUR {value}"
params:
- {name: value, type: integer, description: "0-100 decimal"}
- id: tint_ip
label: Tint
kind: action
transport: tcp
command: "PICTURE_TINT {value}"
params:
- {name: value, type: integer, description: "0-100 decimal"}
- id: sharpness_ip
label: Sharpness
kind: action
transport: tcp
command: "PICTURE_SHARPNESS {value}"
params:
- {name: value, type: integer, description: "0-50 decimal"}
- id: osd_select_ip
label: OSD Select
kind: action
transport: tcp
command: "OSD_SELECT {state}"
params:
- {name: state, type: enum, values: ["on", "off"]}
- id: remote_lock_ip
label: Remote Control Lock
kind: action
transport: tcp
command: "REMOTECONTROLER_LOCK {state}"
params:
- {name: state, type: enum, values: ["on", "off"]}
- id: balance_ip
label: Balance
kind: action
transport: tcp
command: "AUDIO_BALANCE {value}"
params:
- {name: value, type: integer, description: "0-100 decimal"}
- id: color_temperature_ip
label: Color Temperature
kind: action
transport: tcp
command: "PICTURE_COLOUR_TEMPERATURE {value}"
params:
- {name: value, type: integer, description: "0-100 decimal"}
- id: equalizer_ip
label: Equalizer
kind: action
transport: tcp
command: "AUDIO_EQUALIZER {band} {step}"
params:
- {name: band, type: integer, description: "1-5 (frequency band)"}
- {name: step, type: integer, description: "0-20 decimal"}
notes: "Precondition: Settings > Sound > Sound Mode > Equalizer on."
- id: energy_saving_ip
label: Energy Saving
kind: action
transport: tcp
command: "ENERGY_SAVING {mode}"
params:
- {name: mode, type: enum, values: ["screenoff", "maximum", "medium", "minimum", "off"]}
- id: tune_atsc_atv
label: Tune (ATSC/ATV)
kind: action
transport: tcp
command: "CHANNEL_SETTING_ATSC_ATV {channel} {source}"
params:
- {name: channel, type: integer}
- {name: source, type: enum, values: ["antenna", "cable"]}
- id: tune_atsc_dtv
label: Tune (ATSC/DTV)
kind: action
transport: tcp
command: "CHANNEL_SETTING_ATSC_DTV {major} {minor} {source}"
params:
- {name: major, type: integer, description: "Major channel number"}
- {name: minor, type: integer, description: "Minor channel number"}
- {name: source, type: enum, values: ["antennanotphy", "cablenotphy", "cablemaj"]}
- id: channel_add_del_ip
label: Channel Add/Delete
kind: action
transport: tcp
command: "CHANNEL_ADD_DELETE {action}"
params:
- {name: action, type: enum, values: ["add", "delete"]}
- id: key_action_ip
label: IR Remote Key
kind: action
transport: tcp
command: "KEY_ACTION {key}"
params:
- {name: key, type: enum, values: ["exit", "channelup", "channeldown", "volumeup", "volumedown", "arrowright", "arrowleft", "volumemute", "deviceinput", "sleepreserve", "livetv", "previouschannel", "favoritechannel", "teletext", "teletextoption", "returnback", "avmode", "captionsubtitle", "arrowup", "arrowdown", "myapp", "settingmenu", "ok", "quickmenu", "videomode", "audiomode", "channellist", "bluebutton", "yellowbutton", "greenbutton", "redbutton", "aspectratio", "audiodescription", "programmorder", "userguide", "smarthome", "simplelink", "fastforward", "rewind", "programminfo", "programguide", "play", "slowplay", "soccerscreen", "record", "3d", "autoconfig", "app", "screenbright", "number0", "number1", "number2", "number3", "number4", "number5", "number6", "number7", "number8", "number9"]}
- id: backlight_ip
label: Backlight
kind: action
transport: tcp
command: "PICTURE_BACKLIGHT {value}"
params:
- {name: value, type: integer, description: "0-100 decimal"}
notes: "Precondition: Settings > Picture > Energy Saving off."
- id: input_select_ip
label: Input Select
kind: action
transport: tcp
command: "INPUT_SELECT {input}"
params:
- {name: input, type: enum, values: ["dtv", "atv", "cadtv", "catv", "avav1", "component1", "hdmi1", "hdmi2", "hdmi3"]}
- id: threed_off_ip
label: 3D Off / 3D→2D
kind: action
transport: tcp
command: "PICTURE_3D {mode}"
params:
- {name: mode, type: enum, values: ["off", "3dto2d"]}
- id: threed_2dto3d_ip
label: 3D 2D→3D
kind: action
transport: tcp
command: "PICTURE_3D 2dto3d {direction} {depth}"
params:
- {name: direction, type: enum, values: ["righttoleft", "lefttoright"]}
- {name: depth, type: integer, description: "0-20 decimal"}
- id: threed_on_ip
label: 3D On
kind: action
transport: tcp
command: "PICTURE_3D on {pattern} {direction} {depth}"
params:
- {name: pattern, type: enum, values: ["topandbottom", "sidebyside", "checkboard", "framesequential", "columninterleaving", "rowinterleaving"]}
- {name: direction, type: enum, values: ["righttoleft", "lefttoright"]}
- {name: depth, type: integer, description: "0-20 decimal"}
- id: threed_ext_picturecorrection_ip
label: 3D Extended: Picture Correction
kind: action
transport: tcp
command: "PICTURE_3D_EXTENSION picturecorrection {value}"
params:
- {name: value, type: enum, values: ["0", "1"], description: "0=Right→Left, 1=Left→Right"}
notes: "Precondition: PICTURE_3D on X X X"
- id: threed_ext_color_sound_ip
label: 3D Extended: Color Correction / Sound Zooming
kind: action
transport: tcp
command: "PICTURE_3D_EXTENSION {option} {value}"
params:
- {name: option, type: enum, values: ["colorcorrection", "sound"]}
- {name: value, type: enum, values: ["0", "1"], description: "0=off, 1=on"}
notes: "Precondition: PICTURE_3D on X X X"
- id: threed_ext_normal_ip
label: 3D Extended: Normal Image View
kind: action
transport: tcp
command: "PICTURE_3D_EXTENSION normal {value}"
params:
- {name: value, type: enum, values: ["0", "1"], description: "0=off, 1=on"}
notes: "Precondition: PICTURE_3D on X X X"
- id: threed_ext_depth_viewpoint_ip
label: 3D Extended: Depth / Viewpoint
kind: action
transport: tcp
command: "PICTURE_3D_EXTENSION {option} {value}"
params:
- {name: option, type: enum, values: ["depth", "viewpoint"]}
- {name: value, type: integer, description: "0-20 decimal (viewpoint range)"}
notes: "Depth precondition: PICTURE_3D 2dto3d X X AND PICTURE_3D_EXTENSION genre 4 (Manual). Viewpoint precondition: PICTURE_3D 2dto3d X X."
- id: threed_ext_genre_ip
label: 3D Extended: Genre
kind: action
transport: tcp
command: "PICTURE_3D_EXTENSION genre {value}"
params:
- {name: value, type: enum, values: ["0", "1", "2", "3", "4", "5"], description: "0=Standard, 1=Sport, 2=Cinema, 3=Extreme, 4=Manual, 5=Auto"}
notes: "Precondition: PICTURE_3D 2dto3d X X"
- id: session_quit
label: Close Telnet Session
kind: action
transport: tcp
command: "quit"
params: []
notes: "Source line 800-801: 'quit\\nConnection closed by foreign host'."
Feedbacks
- id: power_state
type: enum
values: [on, off]
source: 'Ack: a [SetID] OK [Data]x - Data 00=off, 01=on'
- id: rs232_ack
type: enum
values: [OK, NG]
source: 'Every RS-232 command returns "[Cmd2] [SetID] OK[Data]x" or "NG[Data]x". NG Data 00 = Illegal Code.'
- id: ip_ack
type: enum
values: [OK, NG]
source: 'Telnet text response: "OK" on success, "NG" on error. "NG" also appears on initial Enter when no command sent (line 786).'
- id: read_value
type: hex_byte
source: 'Transmit FF data to read current state of any RS-232 command; response carries status in Data field.'
Safety
confirmation_required_for: []
interlocks: []
# UNRESOLVED: source contains no explicit safety warnings, interlocks, or power-on
# sequencing requirements beyond the implicit "key lock on in standby blocks IR power-on"
# note in command km (lines 344-346).
Notes
Set ID = 0x00 broadcasts to all connected sets; 0x01-0x63 = monitor 1-99 (decimal menu / hex wire). RS-232 cable lets ka (Power) and mc (Key) work in standby; USB-to-serial converter does NOT work in standby. During media playback/recording, only ka and mc are processed — all others return NG. Network IP control requires the user to enable it via Settings (default 3-digit password 828), then connect via telnet to port 9761; sending quit closes the session. WOL (Wake-on-LAN) requires the "Mobile TV On" setting + companion mobile app — not directly controllable from a raw IP command in this spec. Many commands marked "(Depending on model)" — feature surface varies across L Series submodels; the docs do not enumerate which submodels support which commands.
Provenance
source_domains:
- proaudioinc.com
- justaddpower.happyfox.com
source_urls:
- https://www.proaudioinc.com/Dealer_Area/RS232C_EN_160526.pdf
- https://justaddpower.happyfox.com/kb/article/36-lg-rs232-control/
retrieved_at: 2026-04-30T12:05:07.146Z
last_checked_at: 2026-06-02T17:23:10.591Z
Verification Summary
verdict: verified
checked_at: 2026-06-02T17:23:10.591Z
matched_actions: 58
action_count: 58
confidence: medium
summary: "All 58 spec actions matched with source; command tokens, parameter ranges, transport parameters verified; 1:1 bidirectional coverage. (3 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "specific L Series model numbers (L3200/L3700/L4200/etc.) not named in source; doc covers whole L Series with \"(Depending on model)\" flags."
- "source contains no explicit safety warnings, interlocks, or power-on"
- "voltage, current, power consumption, and standby power draw not in source. UNRESOLVED: firmware version compatibility ranges. UNRESOLVED: protocol version numbers. UNRESOLVED: full IR key code list has ~50 entries; included as enum in `key` action (RS-232) and `key_action_ip` action (TCP) but consult source lines 7-37 for any subtle regional differences (e.g. 4C ATSC-only). UNRESOLVED: specific L Series submodel numbers (L3200/L3700/L4200) — source does not name these; the control spec applies to the whole L Series with model-dependent feature flags."
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0