Summary
ISCP (Integra Serial Control Protocol) for Integra DTX Series AV Receivers over RS-232C and TCP/IP (eISCP). Commands are 3-character codes with variable-length parameters. The protocol supports command, query (QSTN), and unsolicited event notification from the receiver. Multi-zone (Zone 2, 3, 4) and RI-system passthrough are included.
Transport
protocols:
- serial
- tcp
serial:
baud_rate: 9600
data_bits: 8
parity: none
stop_bits: 1
flow_control: none
connector: DB9 female (pin 2 TX, pin 3 RX, pin 5 GND)
cable_type: straight-thru
addressing:
port: 60128
port_range: "49152-65535"
auth:
type: UNRESOLVED # source does not state this (was inferred none: no auth procedure in source)
Traits
- powerable # PWR, ZPW, PW3, PW4 commands
- queryable # QSTN parameter on most commands
- levelable # MVL volume, tone controls, zone volumes
- routable # SLI input selector, SLZ/SL3/SL4 zone selectors
Actions
# ISCP format: !1<CMD><PARAM>[CR|LF|CR+LF] over RS-232C
# eISCP format: binary header + !1<CMD><PARAM>[EOF|EOF+CR|EOF+CR+LF] over TCP
# Unit type "1" = Receiver
- id: power_on
label: Power On
kind: action
command: "!1PWR01"
params: []
- id: power_off
label: Power Standby
kind: action
command: "!1PWR00"
params: []
- id: mute_on
label: Audio Mute On
kind: action
command: "!1AMT01"
params: []
- id: mute_off
label: Audio Mute Off
kind: action
command: "!1AMT00"
params: []
- id: mute_toggle
label: Audio Mute Toggle
kind: action
command: "!1AMTTG"
params: []
- id: volume_set
label: Set Master Volume
kind: action
command: "!1MVLxx"
params:
- name: level
type: string
description: "Volume level 0-100 in hex (00-64) or 0-80 in hex (00-50) depending on model"
- id: volume_up
label: Volume Up
kind: action
command: "!1MVLUP"
params: []
- id: volume_down
label: Volume Down
kind: action
command: "!1MVLDOWN"
params: []
- id: volume_up_1db
label: Volume Up 1dB
kind: action
command: "!1MVLUP1"
params: []
- id: volume_down_1db
label: Volume Down 1dB
kind: action
command: "!1MVLDOWN1"
params: []
- id: select_input
label: Select Input
kind: action
command: "!1SLIxx"
params:
- name: input
type: enum
values:
- "00:VIDEO1/VCR-DVR"
- "01:VIDEO2/CBL-SAT"
- "02:VIDEO3/GAME-TV"
- "03:VIDEO4/AUX1"
- "04:VIDEO5/AUX2"
- "05:VIDEO6"
- "06:VIDEO7"
- "10:DVD"
- "20:TAPE1"
- "21:TAPE2"
- "22:PHONO"
- "23:CD"
- "24:FM"
- "25:AM"
- "26:TUNER"
- "27:MUSIC-SERVER"
- "28:INTERNET-RADIO"
- "29:USB-Front"
- "2A:USB-Rear"
- "40:Universal-PORT"
- "30:MULTI-CH"
- "31:XM"
- "32:SIRIUS"
description: Input selector code in hex
- id: input_up
label: Input Selector Up
kind: action
command: "!1SLIUP"
params: []
- id: input_down
label: Input Selector Down
kind: action
command: "!1SLIDOWN"
params: []
- id: speaker_a_set
label: Speaker A Set
kind: action
command: "!1SPAxx"
params:
- name: state
type: enum
values: ["00:off", "01:on"]
description: Speaker A on/off
- id: speaker_b_set
label: Speaker B Set
kind: action
command: "!1SPBxx"
params:
- name: state
type: enum
values: ["00:off", "01:on"]
description: Speaker B on/off
- id: speaker_layout_set
label: Speaker Layout Set
kind: action
command: "!1SPLxx"
params:
- name: layout
type: enum
values: ["SB:SurrBack", "FH:Front-High", "FW:Front-Wide"]
- id: listening_mode_set
label: Set Listening Mode
kind: action
command: "!1LMDxx"
params:
- name: mode
type: enum
values:
- "00:STEREO"
- "01:DIRECT"
- "02:SURROUND"
- "11:PURE-AUDIO"
- "0F:MONO"
- "13:FULL-MONO"
- "0C:ALL-CH-STEREO"
- "0D:THEATER-DIMENSIONAL"
- "80:PLII-Movie"
- "81:PLII-Music"
- "86:PLII-Game"
- "90:PLIIz-Height"
description: Listening mode code in hex (partial list; source contains 50+ modes)
- id: listening_mode_up
label: Listening Mode Up
kind: action
command: "!1LMDUP"
params: []
- id: listening_mode_down
label: Listening Mode Down
kind: action
command: "!1LMDDOWN"
params: []
- id: late_night_set
label: Set Late Night Mode
kind: action
command: "!1LTNxx"
params:
- name: mode
type: enum
values: ["00:off", "01:low", "02:high", "03:auto"]
- id: audyssey_set
label: Set Audyssey EQ
kind: action
command: "!1ADYxx"
params:
- name: state
type: enum
values: ["00:off", "01:on"]
- id: audyssey_dyn_eq_set
label: Set Audyssey Dynamic EQ
kind: action
command: "!1ADQxx"
params:
- name: state
type: enum
values: ["00:off", "01:on"]
- id: audyssey_dyn_vol_set
label: Set Audyssey Dynamic Volume
kind: action
command: "!1ADVxx"
params:
- name: level
type: enum
values: ["00:off", "01:light", "02:medium", "03:heavy"]
- id: tone_front_set
label: Set Front Tone
kind: action
command: "!1TFRBxxTxx"
params:
- name: bass
type: string
description: "Bass -10 to +10 in 2-step increments (hex: -A to +A)"
- name: treble
type: string
description: "Treble -10 to +10 in 2-step increments (hex: -A to +A)"
- id: dimmer_set
label: Set Dimmer Level
kind: action
command: "!1DIMxx"
params:
- name: level
type: enum
values: ["00:bright", "01:dim", "02:dark", "03:shut-off", "08:bright-LED-OFF"]
- id: sleep_set
label: Set Sleep Timer
kind: action
command: "!1SLPxx"
params:
- name: minutes
type: string
description: "1-90 min in hex (01-5A), or OFF"
- id: display_mode_set
label: Set Display Mode
kind: action
command: "!1DIFxx"
params:
- name: mode
type: enum
values: ["00:selector-volume", "01:selector-listening-mode"]
- id: audio_selector_set
label: Set Audio Selector
kind: action
command: "!1SLAxx"
params:
- name: selector
type: enum
values: ["00:AUTO", "01:MULTI-CHANNEL", "02:ANALOG", "04:HDMI", "05:COAX-OPT"]
- id: hdmi_output_set
label: Set HDMI Output
kind: action
command: "!1HDOxx"
params:
- name: output
type: enum
values: ["00:No-Analog", "01:Main", "02:Sub", "03:Both", "04:Both-Main", "05:Both-Sub"]
- id: resolution_set
label: Set Monitor Out Resolution
kind: action
command: "!1RESxx"
params:
- name: resolution
type: enum
values: ["00:Through", "01:Auto", "02:480p", "03:720p", "04:1080i", "05:1080p", "07:1080p-24fs", "06:Source"]
- id: trigger_a_set
label: Set 12V Trigger A
kind: action
command: "!1TGAxx"
params:
- name: state
type: enum
values: ["00:off", "01:on"]
- id: trigger_b_set
label: Set 12V Trigger B
kind: action
command: "!1TGBxx"
params:
- name: state
type: enum
values: ["00:off", "01:on"]
- id: trigger_c_set
label: Set 12V Trigger C
kind: action
command: "!1TGCxx"
params:
- name: state
type: enum
values: ["00:off", "01:on"]
- id: net_play
label: Net/USB Play
kind: action
command: "!1NTCPLAY"
params: []
- id: net_stop
label: Net/USB Stop
kind: action
command: "!1NTCSTOP"
params: []
- id: net_pause
label: Net/USB Pause
kind: action
command: "!1NTCPAUSE"
params: []
- id: net_track_up
label: Net/USB Track Up
kind: action
command: "!1NTCTRUP"
params: []
- id: net_track_down
label: Net/USB Track Down
kind: action
command: "!1NTCTRDN"
params: []
- id: net_repeat
label: Net/USB Repeat
kind: action
command: "!1NTCREPEAT"
params: []
- id: net_random
label: Net/USB Random
kind: action
command: "!1NTCRANDOM"
params: []
# Zone 2 Actions
- id: zone2_power_on
label: Zone 2 Power On
kind: action
command: "!1ZPW01"
params: []
- id: zone2_power_off
label: Zone 2 Power Standby
kind: action
command: "!1ZPW00"
params: []
- id: zone2_mute_on
label: Zone 2 Mute On
kind: action
command: "!1ZMT01"
params: []
- id: zone2_mute_off
label: Zone 2 Mute Off
kind: action
command: "!1ZMT00"
params: []
- id: zone2_volume_set
label: Set Zone 2 Volume
kind: action
command: "!1ZVLxx"
params:
- name: level
type: string
description: "Volume level in hex (00-64 for 0-100 or 00-50 for 0-80)"
- id: zone2_volume_up
label: Zone 2 Volume Up
kind: action
command: "!1ZVLUP"
params: []
- id: zone2_volume_down
label: Zone 2 Volume Down
kind: action
command: "!1ZVLDOWN"
params: []
- id: zone2_select_input
label: Zone 2 Select Input
kind: action
command: "!1SLZxx"
params:
- name: input
type: string
description: "Input selector code in hex (same codes as main SLI, plus 80=SOURCE)"
# Zone 3 Actions
- id: zone3_power_on
label: Zone 3 Power On
kind: action
command: "!1PW301"
params: []
- id: zone3_power_off
label: Zone 3 Power Standby
kind: action
command: "!1PW300"
params: []
- id: zone3_mute_on
label: Zone 3 Mute On
kind: action
command: "!1MT301"
params: []
- id: zone3_mute_off
label: Zone 3 Mute Off
kind: action
command: "!1MT300"
params: []
- id: zone3_volume_set
label: Set Zone 3 Volume
kind: action
command: "!1VL3xx"
params:
- name: level
type: string
description: "Volume level in hex"
- id: zone3_select_input
label: Zone 3 Select Input
kind: action
command: "!1SL3xx"
params:
- name: input
type: string
description: "Input selector code in hex"
# Zone 4 Actions
- id: zone4_power_on
label: Zone 4 Power On
kind: action
command: "!1PW401"
params: []
- id: zone4_power_off
label: Zone 4 Power Standby
kind: action
command: "!1PW400"
params: []
- id: zone4_mute_on
label: Zone 4 Mute On
kind: action
command: "!1MT401"
params: []
- id: zone4_mute_off
label: Zone 4 Mute Off
kind: action
command: "!1MT400"
params: []
- id: zone4_volume_set
label: Set Zone 4 Volume
kind: action
command: "!1VL4xx"
params:
- name: level
type: string
description: "Volume level in hex"
- id: zone4_select_input
label: Zone 4 Select Input
kind: action
command: "!1SL4xx"
params:
- name: input
type: string
description: "Input selector code in hex"
# Memory
- id: memory_store
label: Store Memory
kind: action
command: "!1MEMSTR"
params: []
- id: memory_recall
label: Recall Memory
kind: action
command: "!1MEMRCL"
params: []
- id: memory_lock
label: Lock Memory
kind: action
command: "!1MEMLOCK"
params: []
- id: memory_unlock
label: Unlock Memory
kind: action
command: "!1MEMUNLK"
params: []
# OSD Navigation
- id: osd_menu
label: OSD Menu
kind: action
command: "!1OSDMENU"
params: []
- id: osd_up
label: OSD Up
kind: action
command: "!1OSDUP"
params: []
- id: osd_down
label: OSD Down
kind: action
command: "!1OSDDOWN"
params: []
- id: osd_left
label: OSD Left
kind: action
command: "!1OSDLEFT"
params: []
- id: osd_right
label: OSD Right
kind: action
command: "!1OSDRIGHT"
params: []
- id: osd_enter
label: OSD Enter
kind: action
command: "!1OSDENTER"
params: []
- id: osd_exit
label: OSD Exit
kind: action
command: "!1OSDEXIT"
params: []
# Additional source commands are literal mnemonics; params supply the documented parameter tokens.
- id: speaker_a_wrap
label: Speaker A Wrap
kind: action
command: "SPA"
params:
- name: operation
type: enum
values: ["UP"]
- id: speaker_b_wrap
label: Speaker B Wrap
kind: action
command: "SPB"
params:
- name: operation
type: enum
values: ["UP"]
- id: speaker_layout_wrap
label: Speaker Layout Wrap
kind: action
command: "SPL"
params:
- name: operation
type: enum
values: ["UP"]
- id: tone_front_operation
label: Front Tone Operation
kind: action
command: "TFR"
params:
- name: parameter
type: string
description: '"Bxx", "Txx", "BUP", "BDOWN", "TUP", "TDOWN"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_front_wide_operation
label: Front Wide Tone Operation
kind: action
command: "TFW"
params:
- name: parameter
type: string
description: '"Bxx", "Txx", "BUP", "BDOWN", "TUP", "TDOWN"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_front_high_operation
label: Front High Tone Operation
kind: action
command: "TFH"
params:
- name: parameter
type: string
description: '"Bxx", "Txx", "BUP", "BDOWN", "TUP", "TDOWN"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_center_operation
label: Center Tone Operation
kind: action
command: "TCT"
params:
- name: parameter
type: string
description: '"Bxx", "Txx", "BUP", "BDOWN", "TUP", "TDOWN"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_surround_operation
label: Surround Tone Operation
kind: action
command: "TSR"
params:
- name: parameter
type: string
description: '"Bxx", "Txx", "BUP", "BDOWN", "TUP", "TDOWN"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_surround_back_operation
label: Surround Back Tone Operation
kind: action
command: "TSB"
params:
- name: parameter
type: string
description: '"Bxx", "Txx", "BUP", "BDOWN", "TUP", "TDOWN"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_subwoofer_operation
label: Subwoofer Tone Operation
kind: action
command: "TSW"
params:
- name: parameter
type: string
description: '"Bxx", "BUP", "BDOWN"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: sleep_wrap
label: Sleep Timer Wrap
kind: action
command: "SLP"
params:
- name: operation
type: enum
values: ["UP"]
- id: speaker_level_calibration
label: Speaker Level Calibration
kind: action
command: "SLC"
params:
- name: operation
type: enum
values: ["TEST", "CHSEL", "UP", "DOWN"]
- id: subwoofer_level_operation
label: Subwoofer Level Operation
kind: action
command: "SWL"
params:
- name: parameter
type: string
description: '"-F"-"00"-"+C": sets Subwoofer Level -15dB-0dB-+12dB; "UP", "DOWN"'
- id: center_level_operation
label: Center Level Operation
kind: action
command: "CTL"
params:
- name: parameter
type: string
description: '"-C"-"00"-"+C": sets Center Level -12dB-0dB-+12dB; "UP", "DOWN"'
- id: display_additional_operation
label: Additional Display Operation
kind: action
command: "DIF"
params:
- name: operation
type: enum
values: ["02", "03", "04", "TG"]
description: 'Display Information: "02" Display Digital Format Position, "03" Display Bass Level, "04" Display Treble Level. Display Mode: "02" Display Digital Format(temporary display), "03" Display Video Format(temporary display), "TG" sets Display Mode Wrap-Around Up. Meaning depends on model.'
- id: dimmer_wrap
label: Dimmer Level Wrap
kind: action
command: "DIM"
params:
- name: operation
type: enum
values: ["DIM"]
- id: osd_adjust
label: OSD Adjust
kind: action
command: "OSD"
params:
- name: operation
type: enum
values: ["AUDIO", "VIDEO"]
- id: recout_selector_set
label: Set RECOUT Selector
kind: action
command: "SLR"
params:
- name: input
type: enum
values: ["00", "01", "02", "03", "04", "05", "06", "10", "20", "21", "22", "23", "24", "25", "26", "27", "28", "30", "31", "7F", "80"]
description: '"00" VIDEO1; "01" VIDEO2; "02" VIDEO3; "03" VIDEO4; "04" VIDEO5; "05" VIDEO6; "06" VIDEO7; "10" DVD; "20" TAPE(1); "21" TAPE2; "22" PHONO; "23" CD; "24" FM; "25" AM; "26" TUNER; "27" MUSIC SERVER; "28" INTERNET RADIO; "30" MULTI CH; "31" XM; "7F" OFF; "80" SOURCE'
- id: audio_selector_additional_operation
label: Additional Audio Selector Operation
kind: action
command: "SLA"
params:
- name: selector
type: enum
values: ["03", "06", "UP"]
description: '"03" sets iLINK; "06" sets BALANCE; "UP" sets Audio Selector Wrap-Around Up'
- id: video_output_set
label: Set Video Output
kind: action
command: "VOS"
params:
- name: output
type: enum
values: ["00", "01"]
description: 'Japanese Model Only; "00" sets D4; "01" sets Component'
- id: hdmi_output_wrap
label: HDMI Output Wrap
kind: action
command: "HDO"
params:
- name: operation
type: enum
values: ["UP"]
- id: resolution_wrap
label: Monitor Out Resolution Wrap
kind: action
command: "RES"
params:
- name: operation
type: enum
values: ["UP"]
- id: isf_mode_operation
label: ISF Mode Operation
kind: action
command: "ISF"
params:
- name: mode
type: enum
values: ["00", "01", "02", "UP"]
description: '"00" sets ISF Mode Custom; "01" sets ISF Mode Day; "02" sets ISF Mode Night; "UP" sets ISF Mode State Wrap-Around Up'
- id: listening_mode_additional_operation
label: Additional Listening Mode Operation
kind: action
command: "LMD"
params:
- name: mode
type: enum
values: ["03", "04", "05", "06", "07", "08", "09", "0A", "0B", "0E", "12", "14", "15", "16", "40", "41", "42", "43", "44", "45", "50", "51", "52", "82", "83", "84", "85", "87", "88", "89", "8A", "8B", "8C", "8D", "8E", "8F", "91", "92", "93", "94", "95", "96", "97", "98", "99", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "MOVIE", "MUSIC", "GAME"]
description: 'Additional source LMD codes; "MOVIE", "MUSIC", "GAME" each sets Listening Mode Wrap-Around Up. "87" Only Available North American Model. "40" and "41" meanings depend on model and input signal as documented in the source.'
- id: late_night_wrap
label: Late Night Mode Wrap
kind: action
command: "LTN"
params:
- name: operation
type: enum
values: ["UP"]
- id: re_eq_filter_operation
label: Re-EQ Filter Operation
kind: action
command: "RAS"
params:
- name: state
type: enum
values: ["00", "01", "02", "UP"]
description: 'Re-EQ/Academy Filter: "00" sets Both Off; "01" sets Re-EQ On; "02" sets Academy On; "UP" sets Re-EQ/Academy State Wrap-Around Up. Re-EQ and Cinema Filter variants document "00", "01", "UP" only.'
- id: audyssey_wrap
label: Audyssey EQ Wrap
kind: action
command: "ADY"
params:
- name: operation
type: enum
values: ["UP"]
- id: audyssey_dyn_eq_wrap
label: Audyssey Dynamic EQ Wrap
kind: action
command: "ADQ"
params:
- name: operation
type: enum
values: ["UP"]
- id: audyssey_dyn_vol_wrap
label: Audyssey Dynamic Volume Wrap
kind: action
command: "ADV"
params:
- name: operation
type: enum
values: ["UP"]
- id: dolby_volume_operation
label: Dolby Volume Operation
kind: action
command: "DVL"
params:
- name: level
type: enum
values: ["00", "01", "02", "03", "UP"]
description: '"00" sets Dolby Volume Off; "01" sets Dolby Volume Low; "02" sets Dolby Volume Mid; "03" sets Dolby Volume High; "UP" sets Dolby Volume State Wrap-Around Up'
- id: music_optimizer_operation
label: Music Optimizer Operation
kind: action
command: "MOT"
params:
- name: state
type: enum
values: ["00", "01", "UP"]
description: '"00" sets Music Optimizer Off; "01" sets Music Optimizer On; "UP" sets Music Optimizer State Wrap-Around Up'
- id: tuner_operation
label: Tuner Operation
kind: action
command: "TUN"
params:
- name: parameter
type: string
description: '"nnnnn": sets Directly Tuning Frequency (FM nnn.nn MHz / AM nnnnn kHz / XM nnnnn ch) put 0 in the first two digits of nnnnn at XM; "UP", "DOWN". Frequency range: UNRESOLVED. Include Tuner Pack Model Only; shared by MAIN and ZONE.'
- id: tuner_preset_operation
label: Tuner Preset Operation
kind: action
command: "PRS"
params:
- name: parameter
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation); "01"-"1E": sets Preset No. 1-30 (In hexadecimal representation); "UP", "DOWN". Include Tuner Pack Model Only; shared by MAIN and ZONE.'
- id: tuner_preset_memory
label: Tuner Preset Memory
kind: action
command: "PRM"
params:
- name: preset
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation); "01"-"1E": sets Preset No. 1-30 (In hexadecimal representation). Include Tuner Pack Model Only.'
- id: rds_display
label: RDS Display
kind: action
command: "RDS"
params:
- name: information
type: enum
values: ["00", "01", "02", "UP"]
description: '"00" Display RT Information; "01" Display PTY Information; "02" Display TP Information; "UP" Display RDS Information Wrap-Around Change. RDS Model Only; RBDS Model only supports Display RT information.'
- id: pty_scan
label: PTY Scan
kind: action
command: "PTS"
params:
- name: parameter
type: string
description: '"00"-"1E": sets PTY No "0-30"(In hexadecimal representation); "ENTER": Finish PTY Scan. RDS Model Only.'
- id: tp_scan
label: TP Scan
kind: action
command: "TPS"
params:
- name: operation
type: enum
values: ["", "ENTER"]
description: '"": Start TP Scan (When Don''t Have Parameter); "ENTER": Finish TP Scan. RDS Model Only.'
- id: xm_channel_operation
label: XM Channel Operation
kind: action
command: "XCH"
params:
- name: parameter
type: string
description: '"000"-"255": XM Channel Number "000-255"; "UP", "DOWN". XM Model Only.'
- id: xm_category_operation
label: XM Category Operation
kind: action
command: "XCT"
params:
- name: operation
type: enum
values: ["UP", "DOWN"]
description: XM Model Only
- id: sirius_channel_operation
label: SIRIUS Channel Operation
kind: action
command: "SCH"
params:
- name: parameter
type: string
description: '"000"-"255": SIRIUS Channel Number "000-255"; "UP", "DOWN". SIRIUS Model Only.'
- id: sirius_category_operation
label: SIRIUS Category Operation
kind: action
command: "SCT"
params:
- name: operation
type: enum
values: ["UP", "DOWN"]
description: SIRIUS Model Only
- id: sirius_parental_lock
label: SIRIUS Parental Lock
kind: action
command: "SLK"
params:
- name: password
type: string
description: '"nnnn": Lock Password (4 Digits). SIRIUS Model Only.'
- id: hd_radio_program_set
label: Set HD Radio Program
kind: action
command: "HPR"
params:
- name: program
type: string
description: '"01"-"08": sets directly HD Radio Channel Program. HD Radio Model Only.'
- id: hd_radio_blend_set
label: Set HD Radio Blend Mode
kind: action
command: "HBL"
params:
- name: mode
type: enum
values: ["00", "01"]
description: '"00" sets HD Radio Blend Mode "Auto"; "01" sets HD Radio Blend Mode "Analog". HD Radio Model Only.'
- id: net_additional_operation
label: Additional Net/USB Operation
kind: action
command: "NTC"
params:
- name: parameter
type: string
description: '"FF", "REW", "DISPLAY", "ALBUM", "ARTIST", "GENRE", "PLAYLIST", "RIGHT", "LEFT", "UP", "DOWN", "SELECT", "0"-"9", "DELETE", "CAPS", "LOCATION", "LANGUAGE", "SETUP", "RETURN", "CHUP", "CHDN"; Zone2 Net-Tune: "PLAYz", "STOPz", "PAUSEz", "TRUPz", "TRDNz". FF/REW Net-tune commands must be sent continuously, with no more than 100ms delay between codes.'
- id: internet_radio_preset_set
label: Set Internet Radio Preset
kind: action
command: "NPR"
params:
- name: preset
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation)'
- id: ri_cd_player_operation
label: RI CD Player Operation
kind: action
command: "CCD"
params:
- name: parameter
type: string
description: '"POWER", "TRACK", "PLAY", "STOP", "PAUSE", "SKIP.F", "SKIP.R", "MEMORY", "CLEAR", "REPEAT", "RANDOM", "DISP", "D.MODE", "FF", "REW", "OP/CL", "0"-"10", "+10", "D.SKIP", "DISC.F", "DISC.R", "DISC1"-"DISC6", "STBY", "PON"'
- id: ri_tape1_operation
label: RI Tape 1 Operation
kind: action
command: "CT1"
params:
- name: operation
type: enum
values: ["PLAY.F", "PLAY.R", "STOP", "RC/PAU", "FF", "REW"]
- id: ri_tape2_operation
label: RI Tape 2 Operation
kind: action
command: "CT2"
params:
- name: operation
type: enum
values: ["PLAY.F", "PLAY.R", "STOP", "RC/PAU", "FF", "REW", "OP/CL", "SKIP.F", "SKIP.R", "REC"]
- id: ri_equalizer_operation
label: RI Graphics Equalizer Operation
kind: action
command: "CEQ"
params:
- name: operation
type: enum
values: ["POWER", "PRESET"]
- id: ri_dat_operation
label: RI DAT Recorder Operation
kind: action
command: "CDT"
params:
- name: operation
type: enum
values: ["PLAY", "RC/PAU", "STOP", "SKIP.F", "SKIP.R", "FF", "REW"]
- id: ri_dvd_player_operation
label: RI DVD Player Operation
kind: action
command: "CDV"
params:
- name: parameter
type: string
description: '"POWER", "PWRON", "PWROFF", "PLAY", "STOP", "SKIP.F", "SKIP.R", "FF", "REW", "PAUSE", "LASTPLAY", "SUBTON/OFF", "SUBTITLE", "SETUP", "TOPMENU", "MENU", "UP", "DOWN", "LEFT", "RIGHT", "ENTER", "RETURN", "DISC.F", "DISC.R", "AUDIO", "RANDOM", "OP/CL", "ANGLE", "0"-"10", "SEARCH", "DISP", "REPEAT", "MEMORY", "CLEAR", "ABR", "STEP.F", "STEP.R", "SLOW.F", "SLOW.R", "ZOOMTG", "ZOOMUP", "ZOOMDN", "PROGRE", "VDOFF", "CONMEM", "FUNMEM", "DISC1"-"DISC6", "FOLDUP", "FOLDDN", "P.MODE", "ASCTG", "CDPCD", "MSPUP", "MSPDN", "PCT", "RSCTG", "INIT"'
- id: ri_md_recorder_operation
label: RI MD Recorder Operation
kind: action
command: "CMD"
params:
- name: parameter
type: string
description: '"POWER", "PLAY", "STOP", "FF", "REW", "P.MODE", "SKIP.F", "SKIP.R", "PAUSE", "REC", "MEMORY", "DISP", "SCROLL", "M.SCAN", "CLEAR", "RANDOM", "REPEAT", "ENTER", "EJECT", "0"-"10/0", "nn/nnn", "NAME", "GROUP", "STBY"; encoding of "nn/nnn": UNRESOLVED'
- id: ri_cd_r_recorder_operation
label: RI CD-R Recorder Operation
kind: action
command: "CCR"
params:
- name: parameter
type: string
description: '"POWER", "P.MODE", "PLAY", "STOP", "SKIP.F", "SKIP.R", "PAUSE", "REC", "CLEAR", "REPEAT", "0"-"10/0", "nn/nnn", "SCROLL", "OP/CL", "DISP", "RANDOM", "MEMORY", "FF", "REW", "STBY"; encoding of "nn/nnn": UNRESOLVED'
- id: zone2_mute_toggle
label: Zone 2 Mute Toggle
kind: action
command: "ZMT"
params:
- name: operation
type: enum
values: ["TG"]
- id: zone2_tone_operation
label: Zone 2 Tone Operation
kind: action
command: "ZTN"
params:
- name: parameter
type: string
description: '"Bxx", "Txx", "BUP", "BDOWN", "TUP", "TDOWN"; xx is "-A"..."00"..."+A"[-10...0...+10 2 step]. Only works when main is ON and Zone2 is powered or variable.'
- id: zone2_balance_operation
label: Zone 2 Balance Operation
kind: action
command: "ZBL"
params:
- name: parameter
type: string
description: '"xx": xx is "-A"..."00"..."+A"[-10...0...+10 2 step]; "UP" sets Balance Up (to R 2 Step); "DOWN" sets Balance Down(to L 2 Step). Only works when main is ON and Zone2 is powered or variable.'
- id: zone2_tuner_operation
label: Zone 2 Tuner Operation
kind: action
command: "TUZ"
params:
- name: parameter
type: string
description: '"nnnnn": sets Directly Tuning Frequency; "UP", "DOWN". Separated control; frequency range: UNRESOLVED.'
- id: zone2_preset_operation
label: Zone 2 Preset Operation
kind: action
command: "PRZ"
params:
- name: parameter
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation); "UP", "DOWN". Separated control.'
- id: zone2_network_operation
label: Zone 2 Network Operation
kind: action
command: "NTZ"
params:
- name: operation
type: enum
values: ["PLAY", "STOP", "PAUSE", "TRUP", "TRDN", "CHUP", "CHDN"]
description: Network Model Only
- id: zone2_internet_radio_preset_set
label: Set Zone 2 Internet Radio Preset
kind: action
command: "NPZ"
params:
- name: preset
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation). Network Model Only.'
- id: zone2_listening_mode_set
label: Set Zone 2 Listening Mode
kind: action
command: "LMZ"
params:
- name: mode
type: enum
values: ["00", "01", "0F", "12", "87", "88"]
description: '"00" sets STEREO; "01" sets DIRECT; "0F" sets MONO; "12" sets MULTIPLEX; "87" sets DVS(Pl2); "88" sets DVS(NEO6)'
- id: zone2_late_night_operation
label: Zone 2 Late Night Operation
kind: action
command: "LTZ"
params:
- name: mode
type: enum
values: ["00", "01", "02", "UP"]
description: '"00" sets Late Night Off; "01" sets Late Night Low; "02" sets Late Night High; "UP" sets Late Night State Wrap-Around Up'
- id: zone2_re_eq_filter_operation
label: Zone 2 Re-EQ Filter Operation
kind: action
command: "RAZ"
params:
- name: state
type: enum
values: ["00", "01", "02", "UP"]
description: '"00" sets Both Off; "01" sets Re-EQ On; "02" sets Academy On; "UP" sets Re-EQ/Academy State Wrap-Around Up'
- id: zone3_mute_toggle
label: Zone 3 Mute Toggle
kind: action
command: "MT3"
params:
- name: operation
type: enum
values: ["TG"]
- id: zone3_volume_step
label: Zone 3 Volume Step
kind: action
command: "VL3"
params:
- name: operation
type: enum
values: ["UP", "DOWN"]
- id: zone3_tone_operation
label: Zone 3 Tone Operation
kind: action
command: "TN3"
params:
- name: parameter
type: string
description: '"Bxx", "Txx", "BUP", "BDOWN", "TUP", "TDOWN"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: zone3_balance_operation
label: Zone 3 Balance Operation
kind: action
command: "BL3"
params:
- name: parameter
type: string
description: '"xx": xx is"-A"..."00"..."+A"[-10...0...+10 2 step]; "UP" sets Balance Up (to R 2 Step); "DOWN" sets Balance Down (to L 2 Step)'
- id: zone3_tuner_operation
label: Zone 3 Tuner Operation
kind: action
command: "TU3"
params:
- name: parameter
type: string
description: '"nnnnn": sets Directly Tuning Frequency; "UP", "DOWN". Separated control; frequency range: UNRESOLVED.'
- id: zone3_preset_operation
label: Zone 3 Preset Operation
kind: action
command: "PR3"
params:
- name: parameter
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation); "UP", "DOWN". Separated control.'
- id: zone3_network_operation
label: Zone 3 Network Operation
kind: action
command: "NT3"
params:
- name: operation
type: enum
values: ["PLAY", "STOP", "PAUSE", "TRUP", "TRDN", "CHUP", "CHDN"]
description: Network Model Only
- id: zone3_internet_radio_preset_set
label: Set Zone 3 Internet Radio Preset
kind: action
command: "NP3"
params:
- name: preset
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation). Network Model Only.'
- id: zone4_mute_toggle
label: Zone 4 Mute Toggle
kind: action
command: "MT4"
params:
- name: operation
type: enum
values: ["TG"]
- id: zone4_volume_step
label: Zone 4 Volume Step
kind: action
command: "VL4"
params:
- name: operation
type: enum
values: ["UP", "DOWN"]
- id: zone4_tuner_operation
label: Zone 4 Tuner Operation
kind: action
command: "TU4"
params:
- name: parameter
type: string
description: '"nnnnn": sets Directly Tuning Frequency; "UP", "DOWN". Separated control; frequency range: UNRESOLVED.'
- id: zone4_preset_operation
label: Zone 4 Preset Operation
kind: action
command: "PR4"
params:
- name: parameter
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation); "UP", "DOWN". Separated control.'
- id: zone4_network_operation
label: Zone 4 Network Operation
kind: action
command: "NT4"
params:
- name: operation
type: enum
values: ["PLAY", "STOP", "PAUSE", "TRUP", "TRDN"]
description: Network Model Only
- id: zone4_internet_radio_preset_set
label: Set Zone 4 Internet Radio Preset
kind: action
command: "NP4"
params:
- name: preset
type: string
description: '"01"-"28": sets Preset No. 1-40 (In hexadecimal representation). Network Model Only.'
- id: ri_dock_operation
label: RI Dock Operation
kind: action
command: "CDS"
params:
- name: operation
type: enum
values: ["PWRON", "PWROFF", "PLY/RES", "STOP", "SKIP.F", "SKIP.R", "PAUSE", "PLY/PAU", "FF", "REW", "ALBUM+", "ALBUM-", "PLIST+", "PLIST-", "CHAPT+", "CHAPT-", "RANDOM", "REPEAT", "MUTE", "BLIGHT", "MENU", "ENTER", "UP", "DOWN"]
Feedbacks
# Query format: append QSTN to command, e.g. !1PWRQSTN
# Device responds with !1<CMD><value>
# Unsolicited notifications sent when status changes
- id: power_state
label: Power State
command_query: "!1PWRQSTN"
query_command: "QSTN"
type: enum
values: ["00:standby", "01:on"]
- id: mute_state
label: Mute State
command_query: "!1AMTQSTN"
query_command: "QSTN"
type: enum
values: ["00:off", "01:on"]
- id: volume_level
label: Master Volume Level
command_query: "!1MVLQSTN"
query_command: "QSTN"
type: string
description: "Volume level in hex (00-64 or 00-50 depending on model)"
- id: input_selector
label: Input Selector
command_query: "!1SLIQSTN"
query_command: "QSTN"
type: enum
values:
- "00:VIDEO1"
- "01:VIDEO2"
- "02:VIDEO3"
- "03:VIDEO4"
- "04:VIDEO5"
- "05:VIDEO6"
- "06:VIDEO7"
- "10:DVD"
- "20:TAPE1"
- "22:PHONO"
- "23:CD"
- "24:FM"
- "25:AM"
- "26:TUNER"
- "27:MUSIC-SERVER"
- "28:INTERNET-RADIO"
- "29:USB-Front"
- "2A:USB-Rear"
- "40:Universal-PORT"
- id: listening_mode
label: Listening Mode
command_query: "!1LMDQSTN"
query_command: "QSTN"
type: string
description: "Hex code for current listening mode (50+ possible values)"
- id: speaker_a_state
label: Speaker A State
command_query: "!1SPAQSTN"
query_command: "QSTN"
type: enum
values: ["00:off", "01:on"]
- id: speaker_b_state
label: Speaker B State
command_query: "!1SPBQSTN"
query_command: "QSTN"
type: enum
values: ["00:off", "01:on"]
- id: speaker_layout
label: Speaker Layout
command_query: "!1SPLQSTN"
query_command: "QSTN"
type: enum
values: ["SB:SurrBack", "FH:Front-High", "FW:Front-Wide"]
- id: tone_front
label: Front Tone
command_query: "!1TFRQSTN"
query_command: "QSTN"
type: string
description: "Returns BxxTxx format (bass and treble)"
- id: dimmer_level
label: Dimmer Level
command_query: "!1DIMQSTN"
query_command: "QSTN"
type: enum
values: ["00:bright", "01:dim", "02:dark", "03:shut-off", "08:bright-LED-OFF"]
- id: sleep_time
label: Sleep Timer
command_query: "!1SLPQSTN"
query_command: "QSTN"
type: string
description: "Sleep time in hex minutes (01-5A) or OFF"
- id: display_mode
label: Display Mode
command_query: "!1DIFQSTN"
query_command: "QSTN"
type: enum
values: ["00:selector-volume", "01:selector-listening-mode"]
- id: audio_info
label: Audio Information
command_query: "!1IFAQSTN"
query_command: "QSTN"
type: string
description: "Audio info string matching front panel display"
- id: video_info
label: Video Information
command_query: "!1IFVQSTN"
query_command: "QSTN"
type: string
description: "Video info string matching front panel display"
- id: net_play_status
label: Net/USB Play Status
command_query: "!1NSTQSTN"
query_command: "QSTN"
type: string
description: "3-char string: p=play(S/P/p/F/R), r=repeat(-/R/F/1)"
- id: net_track_info
label: Net/USB Track Info
command_query: "!1NTRQSTN"
query_command: "QSTN"
type: string
description: "cccc/tttt (current/total tracks)"
- id: net_time_info
label: Net/USB Time Info
command_query: "!1NTMQSTN"
query_command: "QSTN"
type: string
description: "mm:ss/mm:ss (elapsed/track time)"
- id: net_artist
label: Net/USB Artist Name
command_query: "!1NATQSTN"
query_command: "QSTN"
type: string
description: "Artist name up to 64 chars"
- id: net_album
label: Net/USB Album Name
command_query: "!1NALQSTN"
query_command: "QSTN"
type: string
description: "Album name up to 64 chars"
- id: net_title
label: Net/USB Title Name
command_query: "!1NTIQSTN"
query_command: "QSTN"
type: string
description: "Title name up to 64 chars"
- id: hdmi_output
label: HDMI Output Selector
command_query: "!1HDOQSTN"
query_command: "QSTN"
type: enum
values: ["00:No-Analog", "01:Main", "02:Sub", "03:Both", "04:Both-Main", "05:Both-Sub"]
- id: resolution
label: Monitor Out Resolution
command_query: "!1RESQSTN"
query_command: "QSTN"
type: enum
values: ["00:Through", "01:Auto", "02:480p", "03:720p", "04:1080i", "05:1080p", "07:1080p-24fs", "06:Source"]
- id: audio_selector
label: Audio Selector
command_query: "!1SLAQSTN"
query_command: "QSTN"
type: enum
values: ["00:AUTO", "01:MULTI-CHANNEL", "02:ANALOG", "04:HDMI", "05:COAX-OPT"]
# Zone 2 Feedbacks
- id: zone2_power_state
label: Zone 2 Power State
command_query: "!1ZPWQSTN"
query_command: "QSTN"
type: enum
values: ["00:standby", "01:on"]
- id: zone2_mute_state
label: Zone 2 Mute State
command_query: "!1ZMTQSTN"
query_command: "QSTN"
type: enum
values: ["00:off", "01:on"]
- id: zone2_volume_level
label: Zone 2 Volume Level
command_query: "!1ZVLQSTN"
query_command: "QSTN"
type: string
description: "Volume level in hex"
- id: zone2_input_selector
label: Zone 2 Input Selector
command_query: "!1SLZQSTN"
query_command: "QSTN"
type: string
description: "Input selector code in hex"
# Zone 3 Feedbacks
- id: zone3_power_state
label: Zone 3 Power State
command_query: "!1PW3QSTN"
query_command: "QSTN"
type: enum
values: ["00:standby", "01:on"]
- id: zone3_mute_state
label: Zone 3 Mute State
command_query: "!1MT3QSTN"
query_command: "QSTN"
type: enum
values: ["00:off", "01:on"]
- id: zone3_volume_level
label: Zone 3 Volume Level
command_query: "!1VL3QSTN"
query_command: "QSTN"
type: string
description: "Volume level in hex"
# Zone 4 Feedbacks
- id: zone4_power_state
label: Zone 4 Power State
command_query: "!1PW4QSTN"
query_command: "QSTN"
type: enum
values: ["00:standby", "01:on"]
- id: zone4_mute_state
label: Zone 4 Mute State
command_query: "!1MT4QSTN"
query_command: "QSTN"
type: enum
values: ["00:off", "01:on"]
- id: zone4_volume_level
label: Zone 4 Volume Level
command_query: "!1VL4QSTN"
query_command: "QSTN"
type: string
description: "Volume level in hex"
# Additional queries retain the source mnemonic and the separately documented QSTN token.
- id: tone_front_wide
label: Front Wide Tone
command_query: "TFW"
query_command: "QSTN"
type: string
description: '"BxxTxx"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_front_high
label: Front High Tone
command_query: "TFH"
query_command: "QSTN"
type: string
description: '"BxxTxx"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_center
label: Center Tone
command_query: "TCT"
query_command: "QSTN"
type: string
description: '"BxxTxx"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_surround
label: Surround Tone
command_query: "TSR"
query_command: "QSTN"
type: string
description: '"BxxTxx"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_surround_back
label: Surround Back Tone
command_query: "TSB"
query_command: "QSTN"
type: string
description: '"BxxTxx"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: tone_subwoofer
label: Subwoofer Tone
command_query: "TSW"
query_command: "QSTN"
type: string
description: 'Source documents query response "BxxTxx" and only Bass setters; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: subwoofer_level
label: Subwoofer Level
command_query: "SWL"
query_command: "QSTN"
type: string
description: '"-F"-"00"-"+C"; Subwoofer Level -15dB-0dB-+12dB'
- id: center_level
label: Center Level
command_query: "CTL"
query_command: "QSTN"
type: string
description: '"-C"-"00"-"+C"; Center Level -12dB-0dB-+12dB'
- id: recout_selector
label: RECOUT Selector
command_query: "SLR"
query_command: "QSTN"
type: enum
values: ["00", "01", "02", "03", "04", "05", "06", "10", "20", "21", "22", "23", "24", "25", "26", "27", "28", "30", "31", "7F", "80"]
- id: video_output
label: Video Output Selector
command_query: "VOS"
query_command: "QSTN"
type: enum
values: ["00", "01"]
- id: isf_mode
label: ISF Mode
command_query: "ISF"
query_command: "QSTN"
type: enum
values: ["00", "01", "02"]
- id: late_night_level
label: Late Night Level
command_query: "LTN"
query_command: "QSTN"
type: enum
values: ["00", "01", "02", "03"]
- id: re_eq_filter_state
label: Re-EQ Filter State
command_query: "RAS"
query_command: "QSTN"
type: enum
values: ["00", "01", "02"]
description: 'Re-EQ/Academy Filter supports "00", "01", "02"; Re-EQ and Cinema Filter variants support "00", "01". Meaning depends on model.'
- id: audyssey_state
label: Audyssey EQ State
command_query: "ADY"
query_command: "QSTN"
type: enum
values: ["00", "01"]
- id: audyssey_dyn_eq_state
label: Audyssey Dynamic EQ State
command_query: "ADQ"
query_command: "QSTN"
type: enum
values: ["00", "01"]
- id: audyssey_dyn_vol_level
label: Audyssey Dynamic Volume Level
command_query: "ADV"
query_command: "QSTN"
type: enum
values: ["00", "01", "02", "03"]
- id: dolby_volume_level
label: Dolby Volume Level
command_query: "DVL"
query_command: "QSTN"
type: enum
values: ["00", "01", "02", "03"]
- id: music_optimizer_state
label: Music Optimizer State
command_query: "MOT"
query_command: "QSTN"
type: enum
values: ["00", "01"]
- id: tuning_frequency
label: Tuning Frequency
command_query: "TUN"
query_command: "QSTN"
type: string
description: '"nnnnn"; FM nnn.nn MHz / AM nnnnn kHz / XM nnnnn ch; put 0 in the first two digits of nnnnn at XM. Frequency range: UNRESOLVED.'
- id: tuner_preset
label: Tuner Preset
command_query: "PRS"
query_command: "QSTN"
type: string
description: '"01"-"28": Preset No. 1-40 (In hexadecimal representation); "01"-"1E": Preset No. 1-30 (In hexadecimal representation)'
- id: xm_channel_name
label: XM Channel Name
command_query: "XCN"
query_command: "QSTN"
type: string
description: '"nnnnnnnnnn": XM Channel Name. XM Model Only; maximum length: UNRESOLVED.'
- id: xm_artist
label: XM Artist Name
command_query: "XAT"
query_command: "QSTN"
type: string
description: '"nnnnnnnnnn": XM Artist Name. XM Model Only; maximum length: UNRESOLVED.'
- id: xm_title
label: XM Title
command_query: "XTI"
query_command: "QSTN"
type: string
description: '"nnnnnnnnnn": XM Title. XM Model Only; maximum length: UNRESOLVED.'
- id: xm_channel_number
label: XM Channel Number
command_query: "XCH"
query_command: "QSTN"
type: string
description: '"000"-"255": XM Channel Number "000-255". XM Model Only.'
- id: xm_category
label: XM Category
command_query: "XCT"
query_command: "QSTN"
type: string
description: '"nnnnnnnnnn": XM Category Info. XM Model Only; maximum length: UNRESOLVED.'
- id: sirius_channel_name
label: SIRIUS Channel Name
command_query: "SCN"
query_command: "QSTN"
type: string
description: '"nnnnnnnnnn": SIRIUS Channel Name. SIRIUS Model Only; maximum length: UNRESOLVED.'
- id: sirius_artist
label: SIRIUS Artist Name
command_query: "SAT"
query_command: "QSTN"
type: string
description: '"nnnnnnnnnn": SIRIUS Artist Name. SIRIUS Model Only; maximum length: UNRESOLVED.'
- id: sirius_title
label: SIRIUS Title
command_query: "STI"
query_command: "QSTN"
type: string
description: '"nnnnnnnnnn": SIRIUS Title. SIRIUS Model Only; maximum length: UNRESOLVED.'
- id: sirius_channel_number
label: SIRIUS Channel Number
command_query: "SCH"
query_command: "QSTN"
type: string
description: '"000"-"255": SIRIUS Channel Number "000-255". SIRIUS Model Only.'
- id: sirius_category
label: SIRIUS Category
command_query: "SCT"
query_command: "QSTN"
type: string
description: '"nnnnnnnnnn": SIRIUS Category Info. SIRIUS Model Only; maximum length: UNRESOLVED.'
- id: hd_radio_artist
label: HD Radio Artist Name
command_query: "HAT"
query_command: "QSTN"
type: string
description: HD Radio Artist Name (variable-length, 64 digits max)
- id: hd_radio_channel_name
label: HD Radio Channel Name
command_query: "HCN"
query_command: "QSTN"
type: string
description: HD Radio Channel Name (Station Name) (7 digits)
- id: hd_radio_title
label: HD Radio Title
command_query: "HTI"
query_command: "QSTN"
type: string
description: HD Radio Title (variable-length, 64 digits max)
- id: hd_radio_detail
label: HD Radio Detail Info
command_query: "HDS"
query_command: "QSTN"
type: string
description: 'Source labels this HD Radio Detail Info, but documents "nnnnnnnnnn" as HD Radio Title and QSTN as gets HD Radio Title. Maximum length: UNRESOLVED.'
- id: hd_radio_program
label: HD Radio Program
command_query: "HPR"
query_command: "QSTN"
type: string
description: '"01"-"08": HD Radio Channel Program'
- id: hd_radio_blend_mode
label: HD Radio Blend Mode
command_query: "HBL"
query_command: "QSTN"
type: enum
values: ["00", "01"]
description: '"00" Auto; "01" Analog'
- id: hd_radio_tuner_status
label: HD Radio Tuner Status
command_query: "HTS"
query_command: "QSTN"
type: string
description: '"mmnnoo": HD Radio Tuner Status (3 bytes) mm -> "00" not HD, "01" HD nn -> current Program "01"-"08" oo -> receivable Program (8 bits are represented in hexadecimal notation. Each bit shows receivable or not.)'
- id: zone2_tone
label: Zone 2 Tone
command_query: "ZTN"
query_command: "QSTN"
type: string
description: '"BxxTxx"; xx is "-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: zone2_balance
label: Zone 2 Balance
command_query: "ZBL"
query_command: "QSTN"
type: string
description: '"xx"; xx is "-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: zone2_tuning_frequency
label: Zone 2 Tuning Frequency
command_query: "TUZ"
query_command: "QSTN"
type: string
description: '"nnnnn"; separated control. Frequency range: UNRESOLVED.'
- id: zone2_preset
label: Zone 2 Preset
command_query: "PRZ"
query_command: "QSTN"
type: string
description: '"01"-"28": Preset No. 1-40 (In hexadecimal representation); separated control'
- id: zone2_late_night_level
label: Zone 2 Late Night Level
command_query: "LTZ"
query_command: "QSTN"
type: enum
values: ["00", "01", "02"]
- id: zone2_re_eq_filter_state
label: Zone 2 Re-EQ Filter State
command_query: "RAZ"
query_command: "QSTN"
type: enum
values: ["00", "01", "02"]
- id: zone3_tone
label: Zone 3 Tone
command_query: "TN3"
query_command: "QSTN"
type: string
description: '"BxxTxx"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: zone3_balance
label: Zone 3 Balance
command_query: "BL3"
query_command: "QSTN"
type: string
description: '"xx"; xx is"-A"..."00"..."+A"[-10...0...+10 2 step]'
- id: zone3_input_selector
label: Zone 3 Input Selector
command_query: "SL3"
query_command: "QSTN"
type: enum
values: ["00", "01", "02", "03", "04", "05", "06", "10", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "2A", "40", "30", "31", "32", "80"]
- id: zone3_tuning_frequency
label: Zone 3 Tuning Frequency
command_query: "TU3"
query_command: "QSTN"
type: string
description: '"nnnnn"; separated control. Frequency range: UNRESOLVED.'
- id: zone3_preset
label: Zone 3 Preset
command_query: "PR3"
query_command: "QSTN"
type: string
description: '"01"-"28": Preset No. 1-40 (In hexadecimal representation); separated control'
- id: zone4_input_selector
label: Zone 4 Input Selector
command_query: "SL4"
query_command: "QSTN"
type: enum
values: ["00", "01", "02", "03", "04", "05", "06", "10", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "2A", "40", "30", "31", "32", "80"]
- id: zone4_tuning_frequency
label: Zone 4 Tuning Frequency
command_query: "TU4"
query_command: "QSTN"
type: string
description: '"nnnnn"; separated control. Frequency range: UNRESOLVED.'
- id: zone4_preset
label: Zone 4 Preset
command_query: "PR4"
query_command: "QSTN"
type: string
description: '"01"-"28": Preset No. 1-40 (In hexadecimal representation); separated control'
Variables
# Tone controls per channel are settable parameters with continuous ranges
# Subwoofer level: SWL command, -15dB to +12dB
# Center level: CTL command, -12dB to +12dB
# Zone balance controls: ZBL (Zone 2), BL3 (Zone 3)
# UNRESOLVED: exact hex encoding for negative values in tone/balance commands not fully specified
Events
# Device sends unsolicited status notifications when state changes
# Format: !1<COMMAND><VALUE>[EOF] (same format as query responses)
# Example: Receiver sends "!1SLI03" when input changes to VIDEO4/AUX1
# Notes from source:
# - Connection must be held continuously to receive notifications
# - Only one client connection supported at a time
# - Receiver responds within 50msec; no response = communication failure
Macros
# Speaker Level Calibration sequence (SLC command):
# 1. Send TEST to start test tone
# 2. Send CHSEL to cycle through channels
# 3. Send UP/DOWN to adjust level per channel
# UNRESOLVED: no explicit multi-step macros defined in source beyond calibration
Safety
confirmation_required_for: []
interlocks:
- "Zone 2 volume/tone only works when main zone is ON"
- "Zone 2 volume/tone only works when Zone 2 is powered or set to variable"
- "12V triggers (TGA/TGB/TGC) only available when all trigger params are OFF in Setup Menu"
# UNRESOLVED: no explicit safety warnings or power sequencing requirements found in source
Notes
- ISCP commands use unit type character "1" for Receivers (format:
!1CCC##where CCC=3-char command, ##=parameter). - Volume values are hexadecimal. Two ranges exist depending on model: 0x00-0x64 (0-100) or 0x00-0x50 (0-80).
- RS-232C end characters: CR, LF, or CR+LF. eISCP end characters: EOF, EOF+CR, or EOF+CR+LF (model-dependent).
- eISCP header is 16 bytes big-endian: magic "ISCP", header size (0x00000010), data size, version (0x01), reserved (0x000000).
- Minimum interval between received messages is 50ms. Commands must not be sent faster than this.
- TCP connection must be maintained continuously; only one client connection is supported.
- TCP port default is 60128, configurable in receiver setup menu (49152-65535). Receiver must be set to standby and back on after port change.
- The listening mode command (LMD) has 50+ possible values; only a subset is listed in this spec.
- Tuner, XM, SIRIUS, and HD Radio commands are shared between MAIN and ZONE sides.
- RI (Remote Interactive) passthrough commands (CCD, CT1, CT2, CEQ, CDT, CDV, CMD, CCR, CDS) control connected external devices, not the receiver itself.
- Document version: 1.15, dated 31 August 2009.
Provenance
source_domains: []
source_urls: []
retrieved_at: 2026-10-07T13:24:57.457Z
last_checked_at: 2026-10-07T13:24:57.457Z
Verification Summary
verdict: verified
checked_at: 2026-10-07T13:24:57.457Z
matched_actions: 234
action_count: 234
confidence: medium
summary: "All 234 action units match source ISCP mnemonics and parameters; transport literal in source; all ~113 source commands represented. (9 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "specific DTX sub-models not enumerated in source; source references TX-SR805, TX-NR905, TX-NR1000 as footnotes but does not provide a definitive DTX model list"
- "exact hex encoding for negative values in tone/balance commands not fully specified"
- "no explicit multi-step macros defined in source beyond calibration"
- "no explicit safety warnings or power sequencing requirements found in source"
- "specific DTX sub-model list not provided in source"
- "firmware version compatibility not stated in source"
- "exact hex encoding for tone/balance negative values not fully specified"
- "eISCP header data_size field calculation (includes or excludes end characters?)"
- "maximum command string length not stated"
- "model-specific source not located"
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0