AI4AVSummary
This spec covers the Domintell Dac1W01 RS-232C and Ethernet control interface used to integrate third-party devices with a Domintell installation. ASCII strings are exchanged bidirectionally between the host system and Domintell modules (DRS23201/02/03 and DETH02/03/04) over RS-232 or UDP. The spec documents the input protocol for sending commands to the Domintell installation, the Light Protocol output frames emitted by DRS23202/DETH02, and the DETH02 SDK library functions for session login.
Transport
protocols:
- serial
- udp
serial:
baud_rate: 57600 # DRS23202 baud rate is fixed at 57600
data_bits: 8
parity: none
stop_bits: 1
flow_control: none
addressing:
port: 17481 # DETH02 default UDP port; configurable
auth:
type: password # DETH02: send "LOGIN" (or "LOGIN<encrypted-password>") to open a session; DRS2320x has no login procedure
Traits
- powerable
- routable # inferred: output routing commands present (per-module output change)
- queryable # inferred: %S status query commands present
- levelable # inferred: dimmer/volume level commands present (%Dxxx, %I%Dxxx, %O%Dxxx)
Actions
- id: ping
label: Ping (ask all statuses)
kind: query
command: "PING"
params: []
- id: app_info
label: Request application info
kind: query
command: "APPINFO"
params: []
- id: mod_version
label: Request module firmware version
kind: query
command: "MOD_VERSION"
params: []
- id: hello
label: Hello (reserved)
kind: query
command: "HELLO"
params: []
- id: login
label: Open session (DETH02)
kind: action
command: "LOGIN" # or "LOGIN<encrypted-password>" if a password is set
params: []
- id: logout
label: Close session (DETH02)
kind: action
command: "LOGOUT"
params: []
- id: discover
label: Discovery (DETH02)
kind: query
command: "DISCOVER"
params: []
- id: set_ip
label: Set IP (DETH02)
kind: action
command: "SETIP={ip}"
params:
- name: ip
type: string
description: IP address to assign
- id: change_pbu_output
label: Change output on DPBU01/02/04/06
kind: action
command: "BU{module_type}{serial_hex}-{output}"
params:
- name: module_type
type: string
description: 1=DPBU01, 2=DPBU02, 4=DPBU04, 6=DPBU06
- name: serial_hex
type: string
description: 6-char hex product label (no separator)
- name: output
type: integer
description: Output number
- id: get_pbu_status
label: Get status of input/LED on DPBUxx
kind: query
command: "BU{module_type}{serial_hex}%S"
params:
- name: module_type
type: string
description: 1=DPBU01
- name: serial_hex
type: string
description: 6-char hex product label
- id: simulate_pbu_push
label: Simulate push on DPBUxx button
kind: action
command: "BU{module_type}{serial_hex}-{output}%P{push}"
params:
- name: module_type
type: string
description: 1=DPBU01, 2=DPBU02, 4=DPBU04, 6=DPBU06
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Button number
- name: push
type: integer
description: 1=Begin short push, 2=End short push, 3=Begin long push, 4=End long push
- id: change_bir_output
label: Change output on DBIR01
kind: action
command: "BIR{serial_hex}-{output}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number (1-8)
- id: set_bir_output
label: Set output on DBIR01
kind: action
command: "BIR{serial_hex}-{output}%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- id: reset_bir_output
label: Reset output on DBIR01
kind: action
command: "BIR{serial_hex}-{output}%O"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- id: change_trv_output
label: Change shutter on DTRV01
kind: action
command: "TRV{serial_hex}-{shutter}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: shutter
type: integer
description: Shutter number
- id: trv_go_high
label: Shutter goes High (v1.19.17)
kind: action
command: "TRV{serial_hex}-{shutter}%H"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: shutter
type: integer
description: Shutter number
- id: trv_go_low
label: Shutter goes Low (v1.19.17)
kind: action
command: "TRV{serial_hex}-{shutter}%L"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: shutter
type: integer
description: Shutter number
- id: trv_stop
label: Stop shutter on DTRV01
kind: action
command: "TRV{serial_hex}-{shutter}%O"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: shutter
type: integer
description: Shutter number
- id: change_trp_output
label: Change output on DPBU06 via DTRP01
kind: action
command: "TRP{serial_hex}-{output}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- id: change_dim_output
label: Change output on DDIM01
kind: action
command: "DIM{serial_hex}-{output}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number (1-8)
- id: set_dim_output
label: Set dimmer output to percent
kind: action
command: "DIM{serial_hex}-{output}%D{percent}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: percent
type: integer
description: Dimmer value (0-100)
- id: dim_start
label: Start dim on DDIM01 output (v1.17.02)
kind: action
command: "DIM{serial_hex}-{output}%DB"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- id: dim_stop
label: Stop dim on DDIM01 output (v1.17.02)
kind: action
command: "DIM{serial_hex}-{output}%DE"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- id: dim_increase
label: Increase dimmer by step percent (v1.17.02)
kind: action
command: "DIM{serial_hex}-{output}%I%D{step}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: step
type: integer
description: Step percent (stops at 100)
- id: dim_decrease
label: Decrease dimmer by step percent (v1.17.02)
kind: action
command: "DIM{serial_hex}-{output}%O%D{step}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: step
type: integer
description: Step percent (stops at 0)
- id: change_led_output
label: Change output on DLED01
kind: action
command: "LED{serial_hex}-{output}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number (1-4)
- id: change_variable
label: Change variable
kind: action
command: "VAR{n}"
params:
- name: n
type: integer
description: Variable number
- id: change_system_variable
label: Change system variable
kind: action
command: "SYS{n}"
params:
- name: n
type: integer
description: System variable number
- id: get_system_variable
label: Get status of system variable
kind: query
command: "SYS{n}%S"
params:
- name: n
type: integer
description: System variable number
- id: change_tpv_output
label: Change shutter on DTRPV01
kind: action
command: "TPV{serial_hex}-{shutter}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: shutter
type: integer
description: Shutter number
- id: change_d10_output
label: Change output on DOUT10V01
kind: action
command: "D10{serial_hex}-{output}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- id: set_d10_output
label: Set 0-10V output to percent
kind: action
command: "D10{serial_hex}-{output}%D{percent}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: percent
type: integer
description: Percent value (0-100)
- id: d10_increase
label: Increase 0-10V output by step percent (v1.17.02)
kind: action
command: "D10{serial_hex}-{output}%I%D{step}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: step
type: integer
description: Step percent
- id: d10_decrease
label: Decrease 0-10V output by step percent (v1.17.02)
kind: action
command: "D10{serial_hex}-{output}%O%D{step}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: step
type: integer
description: Step percent
- id: dmx_set_channel
label: Set DMX channel value on DDMX01
kind: action
command: "DMX{serial_hex}-{device}-{channel}%X{value}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: device
type: integer
description: Device number
- name: channel
type: integer
description: Channel number
- name: value
type: integer
description: DMX value (0-255)
- id: change_v24_output
label: Change shutter on DTRVBT01
kind: action
command: "V24{serial_hex}-{shutter}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: shutter
type: integer
description: Shutter number
- id: tsc_set_temperature_tsb
label: Set temperature on DTSC01/03
kind: action
command: "TSB{serial_hex}%T{temp}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: temp
type: string
description: Temperature with 1 decimal place (e.g. 24.5)
- id: tsc_set_temperature_lt2
label: Set temperature on DTSC02
kind: action
command: "LT2{serial_hex}%T{temp}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: temp
type: string
description: Temperature with 1 decimal place
- id: tsc_set_temperature_lt4
label: Set temperature on DTSC04
kind: action
command: "LT4{serial_hex}%T{temp}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: temp
type: string
description: Temperature with 1 decimal place
- id: tsc_set_temperature_t35
label: Set temperature on DTSC35
kind: action
command: "T35{serial_hex}%T{temp}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: temp
type: string
description: Temperature with 1 decimal place
- id: temp_set_mode
label: Set DTEMP01 temperature mode
kind: action
command: "TE2{serial_hex}%M{mode}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: mode
type: integer
description: 1=?, 2=Absence (per sample); other modes not enumerated in source
- id: get_i10_status
label: Ask status of DIN10V input
kind: query
command: "I10{serial_hex}%S"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: amp_set_output_aux
label: Set DAMPLI01 output to Aux at volume
kind: action
command: "AMP{serial_hex}-{output}%D{volume}%A{aux}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: volume
type: integer
description: Volume percent (0-100)
- name: aux
type: integer
description: Aux source 1-4 (Tuner = 5)
- id: amp_volume_increase
label: Increase DAMPLI01 output volume by step (v1.17.02)
kind: action
command: "AMP{serial_hex}-{output}%I%D{step}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: step
type: integer
description: Step percent
- id: amp_volume_decrease
label: Decrease DAMPLI01 output volume by step (v1.17.02)
kind: action
command: "AMP{serial_hex}-{output}%O%D{step}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: step
type: integer
description: Step percent
- id: amp_set_output_tuner
label: Set DAMPLI01 output to Tuner with volume and frequency
kind: action
command: "AMP{serial_hex}-{output}%D{volume}%F{freq_mhz}%A5"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: integer
description: Output number
- name: volume
type: integer
description: Volume percent (0-100)
- name: freq_mhz
type: string
description: Tuner frequency in MHz (e.g. 99.1)
- id: amp_change_output_volume
label: Change DAMPLI01 output volume
kind: action
command: "AMP{serial}-" # UNRESOLVED: sample shows "AMP000003-4" with no separator - template unclear
params:
- name: serial
type: string
description: 6-char hex product label (no separator per sample)
- name: output
type: integer
description: Output number
- id: amp_get_status
label: Ask status of all DAMPLI01 outputs
kind: query
command: "AMP{serial_hex}%S"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: mem_set_mixed
label: SET Mixed Memo (v1.16.02)
kind: action
command: "MEM{serial_hex}%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: mem_reset_mixed
label: RESET Mixed Memo (v1.16.02)
kind: action
command: "MEM{serial_hex}%O"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: mem_set_dimmer
label: SET dimmer percent on Dimmer Memo (v1.16.03)
kind: action
command: "MEM{serial_hex}%D{percent}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: percent
type: integer
description: Dimmer percent (0-100)
- id: mem_dimmer_increase
label: Increase Dimmer Memo by step (v1.17.02)
kind: action
command: "MEM{serial_hex}%I%D{step}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: step
type: integer
description: Step percent
- id: mem_dimmer_decrease
label: Decrease Dimmer Memo by step (v1.17.02)
kind: action
command: "MEM{serial_hex}%O%D{step}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: step
type: integer
description: Step percent
- id: mem_shutter_off
label: Shutter Memo Group OFF
kind: action
command: "MEM{group}%O"
params:
- name: group
type: integer
description: Shutter memo group number
- id: mem_shutter_up
label: Shutter Memo Group UP (High)
kind: action
command: "MEM{group}%H"
params:
- name: group
type: integer
description: Shutter memo group number
- id: mem_shutter_down
label: Shutter Memo Group Down (Low)
kind: action
command: "MEM{group}%L"
params:
- name: group
type: integer
description: Shutter memo group number
- id: sfe_set
label: SET Sfere (v1.16.03)
kind: action
command: "SFE{serial_hex}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: sfe_set_alt
label: SET Sfere alternate form (v1.16.03)
kind: action
command: "SFE{serial_hex}%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: sfe_get_status
label: Get status of each item in Sfere (v1.17.02)
kind: query
command: "SFE{serial_hex}%S"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: pbl_set_output
label: SET DPBTLCD0x output
kind: action
command: "PBL{serial_hex}-{output}%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: string
description: Hex output identifier (e.g. C-6)
- id: pbl_reset_output
label: RESET DPBTLCD0x output
kind: action
command: "PBL{serial_hex}-{output}%O"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: string
description: Hex output identifier (e.g. C-1)
- id: pbl_simulate_push
label: Simulate begin/end of short push on DPBTLCD0x (v1.17.02)
kind: action
command: "PBL{serial_hex}-{output}%P{push}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: output
type: string
description: Hex output identifier
- name: push
type: integer
description: 1=Begin short push, 2=End short push
- id: pbl_get_status
label: Return DPBTLCD0x status (v1.17.02)
kind: query
command: "PBL{serial_hex}%S"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: fan_set_speed
label: Set DFAN01 speed
kind: action
command: "FAN{serial_hex}-{speed}%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: speed
type: integer
description: Fan speed (1, 2, 3)
- id: fan_set_heating
label: Set DFAN01 to heating mode
kind: action
command: "FAN{serial_hex}-4%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: fan_set_cooling
label: Set DFAN01 to cooling mode
kind: action
command: "FAN{serial_hex}-5%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: fan_set_manual_mode
label: Set DFAN01 manual mode
kind: action
command: "FAN{serial_hex}-6%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: fan_set_auto_mode
label: Set DFAN01 automatic mode
kind: action
command: "FAN{serial_hex}-6%O"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: zon_increment_setpoint
label: T° Zone 1, increment setpoint
kind: action
command: "ZON{serial_hex}%I"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: zon_decrement_setpoint
label: T° Zone 1, decrement setpoint
kind: action
command: "ZON{serial_hex}%O"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: zon_set_setpoint
label: T° Zone 1, set setpoint
kind: action
command: "ZON{serial_hex}%T{temp}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: temp
type: string
description: Setpoint temperature (e.g. 15.5)
- id: zon_set_absence_mode
label: T° Zone 1, set absence mode
kind: action
command: "ZON{serial_hex}%M1"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: zon_set_auto_mode
label: T° Zone 1, set automatic mode
kind: action
command: "ZON{serial_hex}%M2"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: zon_set_comfort_mode
label: T° Zone 1, set comfort mode
kind: action
command: "ZON{serial_hex}%M5"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: zon_set_frost_mode
label: T° Zone 1, set frost mode (if enabled)
kind: action
command: "ZON{serial_hex}%M6"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- id: clk_set
label: Set Clock (v1.17.02)
kind: action
command: "CLK{serial_hex}%K{hh}:{mm}:{ss} {day_mask} {dd}/{mm}/{yy}"
params:
- name: serial_hex
type: string
description: 6-char hex product label
- name: hh
type: string
description: Hour (00-23)
- name: mm
type: string
description: Minute (00-59)
- name: ss
type: string
description: Second (00-59)
- name: day_mask
type: string
description: 2-char hex day mask (b0=sun, b1=mon, ...); FF disables clock
- name: dd
type: string
description: Day
- name: mm
type: string
description: Month
- name: yy
type: string
description: Year (last 2 digits)
- id: is_simulate_push
label: Simulate push on DISMxx input
kind: action
command: "IS{module_type}{serial_hex}-{input}%P{push}"
params:
- name: module_type
type: string
description: 4=DISM04, 8=DISM08
- name: serial_hex
type: string
description: 6-char hex product label
- name: input
type: integer
description: Input number
- name: push
type: integer
description: 1=Begin short, 2=End short, 3=Begin long, 4=End long
- id: setip
label: Set module IP (DETH02)
kind: action
command: "SETIP={ip}"
params:
- name: ip
type: string
description: IPv4 address (DHCP by default; static IP assignable via this command)
Feedbacks
- id: pong
label: Pong reply to PING
type: string
description: "Answer 'PONG<CR><LF>' from DRS23202/DETH02 after a 'PING' string"
- id: mod_version_rs232
label: Module version (DRS23202)
type: string
description: "Answer 'MOD_VERSION=SER_V{xx}' after 'MOD_VERSION' (hex)"
- id: mod_version_eth
label: Module version (DETH02)
type: string
description: "Answer 'MOD_VERSION=ETH_V{xx}_STK_V{xx}' after 'MOD_VERSION' (hex)"
- id: appinfo_block
label: APPINFO application description
type: string
description: Application/program info block returned after 'APPINFO'
- id: temperature_status
label: Temperature status frame
type: string
description: Format: "{T}{serial}T{measure} {setpoint} {mode} {range}" where mode ∈ {AUTO, ABSENCE, COMFORT, ...}
- id: binary_input_state
label: Input bits byte
type: string
description: 2-char hex byte; LSB=input 0, MSB=input 7 (Data Type 'I')
- id: binary_output_state
label: Output bits byte
type: string
description: 2-char hex byte; LSB=output 0, MSB=output 7 (Data Type 'O')
- id: dimmer_state
label: Dimmer percent bytes
type: string
description: Two hex bytes per output; '64' = 100% (Data Type 'D')
- id: dmx_state
label: DMX channel bytes
type: string
description: Two hex bytes per channel; 'C0' = 192 (Data Type 'X')
- id: ir_command_code
label: IR command code
type: string
description: 2-char hex per key; key 1 = '01' (Data Type 'C')
- id: sound_state
label: Sound module state
type: string
description: Format "{output}-{volume}-{source}-{freq_mhz_hex}" e.g. '1-32-TUNE-63-03E8' (Data Type 'S', since card version 5)
- id: button_state
label: Button press state
type: string
description: 2 bytes button number + 2 bytes (00=released, 01=pressed) (Data Type 'B')
- id: temp_plage_state
label: Temp plage state
type: string
description: "Format '{hh}:{mm}:{ss} {setpoint}'" (Data Type 'P')
- id: clock_state
label: Clock state
type: string
description: Format "{hh}:{mm}:{ss}-{day_mask}-{mm}/{dd}/{yy}-{name}[{SUNSET|SUNRISE|RESET}]" (Data Type 'K')
- id: fan_state
label: DFAN01 state
type: string
description: Format 'O{byte}' e.g. 'O20'=OFF manual, 'O11'=cooling speed1 auto, 'O0C'=heating speed3 auto, 'O32'=cooling speed2 manual
- id: variable_state
label: Variable state
type: string
description: Format 'O{byte}' (True/False) or 'D{hex}' (percent) for VAR/SYS
- id: shutter_state
label: Shutter state
type: string
description: Format 'O{byte}' e.g. 'O01' = shutter 1 UP (DTRP02 / DTRVBT01)
- id: dmx_channel_state
label: DMX channel state
type: string
description: Per-channel hex bytes emitted by DDMX01 (Data Type 'X')
Variables
# UNRESOLVED: settable parameter ranges are expressed as inline %Dxxx / %Txx.x / %Fxxx,xxxx within command strings rather than as discrete variables. No standalone variable table is present in the source.
Events
# UNRESOLVED: All Feedbacks above are unsolicited status frames pushed by DRS23202/DETH02 on every state change (the "Light Protocol" real-time status). Each Feedbacks entry implicitly doubles as an event source. No separate event vocabulary is defined in the source.
Macros
# UNRESOLVED: source does not document any multi-step macro sequences; macro-like behaviour is achieved by chaining commands separated by '&' in a single frame.
Safety
confirmation_required_for: []
interlocks: []
Notes
- The DRS23201 string-exchange firmware has no login procedure; the DRS23202 "Light Protocol" firmware uses fixed 57600/8/N/1; the DRS23203 Bang & Olufsen interface is not covered by this document.
- DRS23201 baud rate is configurable: 1200, 2400, 4800, 9600, 19200, 38400, 76800 (default depends on configuration). Parity selectable (since version 4): none/even/odd. DRS23202 baud rate is fixed at 57600 with parity none.
- DETH02 default UDP port is 17481 (configurable). DHCP is used by default for IP assignment.
- Login on DETH02: send UDP "LOGIN" (no password) or "LOGIN" computed via the libdeth
deth_encryptpswfunction. Password min 4, max 10 ASCII characters; SDK must be >= 2.0.0 (binary incompatible with 1.0.0). - Lowercase is auto-uppercased; leading/trailing spaces stripped; messages capped at 30 chars; 25 ms minimum gap between RS-232 messages (or use '&' as inline separator).
- Control characters may be embedded with
<xx>wherexxis decimal 00-31, exactly two digits (extended mode since version 5). - DFAN01 outputs 1-5 are fan speeds; output 6 selects working mode (0=auto, 1=manual). For safety reasons valves always follow setpoint regulation.
- The source document describes the gateway family (DRS23201/02/03, DETH02/03/04), not a product named "Dac1W01". The Dac1W01 model string does not appear in the source — see Summary.
- DMX frame format pre-v11 (DETH02) / v16 (DRS23202) used a second
-between device and channel; that form is obsolete and not enumerated separately here.
Provenance
source_domains:
- pro2.mydomintell.com
- pro.mydomintell.com
- domintell.com
- archive.org
source_urls:
- https://pro2.mydomintell.com/share/manual/DETH02-DRS23202/DS_RS232_ETH_Interfaces_v1_19_17.pdf
- https://pro.mydomintell.com/share/manual/DETH02-DRS23202/DS_RS232_ETH_Interfaces_v1_27_08.pdf
- https://www.domintell.com/en/products/features/controle-dacces/dac1w01/
- https://www.domintell.com/en/1-wire/
- https://archive.org/details/manualzilla-id-5989576
retrieved_at: 2026-08-11T04:49:56.269Z
last_checked_at: 2026-08-19T09:19:24.021Z
Verification Summary
verdict: verified
checked_at: 2026-08-19T09:19:24.021Z
matched_actions: 78
action_count: 78
confidence: medium
summary: "All 78 spec wire-literal commands appear verbatim in the source's input-protocol sample table; transport params (57600 8/N/1, UDP 17481, LOGIN password) verified. (7 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "The supplied source document covers the Domintell RS-232 / Ethernet gateway module family (DRS23201, DRS23202, DRS23203, DETH02, DETH03, DETH04), not a product specifically named \"Dac1W01\". The Dac1W01 model name does not appear verbatim in the source. The spec below treats the document as the control interface for the Dac1W01 family and populates fields from the gateway protocol description; fields unique to a Dac1W01 device are not stated in the source."
- "sample shows \"AMP000003-4\" with no separator - template unclear"
- "settable parameter ranges are expressed as inline %Dxxx / %Txx.x / %Fxxx,xxxx within command strings rather than as discrete variables. No standalone variable table is present in the source."
- "All Feedbacks above are unsolicited status frames pushed by DRS23202/DETH02 on every state change (the \"Light Protocol\" real-time status). Each Feedbacks entry implicitly doubles as an event source. No separate event vocabulary is defined in the source."
- "source does not document any multi-step macro sequences; macro-like behaviour is achieved by chaining commands separated by '&' in a single frame."
- "No safety warnings, interlock procedures, or power-on sequencing requirements are stated in the source. The only cautionary text relates to networking (router port-forwarding risks) and DFAN01 valve/fan behaviour (valves must follow setpoint; if valves OFF the fan will not start), neither of which constitutes a control-protocol safety interlock."
- "firmware version compatibility (e.g. which features require v1.16.02 / v1.17.02 / v1.19.17) is documented per-feature in the source but not summarized as a single Dac1W01 firmware baseline."
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0