AI4AVSummary
Laser phosphor projector controlled via RS-232 or TCP/IP. Default IP 192.168.0.100:7000. Commands are ASCII strings *command operator value terminated by CR. Queries return ASCII values; acknowledged commands return ACK/ack, errors return NAK/nack. Only one control path at a time supported.
Transport
protocols:
- tcp
- serial # RS-232 also documented
addressing:
port: 7000 # stated: "TCP port number is 7000"
default_ip: 192.168.0.100
serial:
baud_rate: 9600 # stated: "Baud rate 9,600 bps"
data_bits: 8 # stated: "Data length 8 bits"
parity: null # UNRESOLVED: parity not stated
stop_bits: null # UNRESOLVED: stop bits not stated
flow_control: null # UNRESOLVED: flow control not stated
auth:
type: none # inferred: no auth/login procedure in source
Traits
- powerable # inferred: `power` command present (0=Off, 1=On)
- routable # inferred: `input` command with routing values present
- queryable # inferred: multiple `?` query commands present
- levelable # inferred: brightness, contrast, saturation, hue, zoom, focus commands present
Actions
- id: input
label: Input Select
kind: action
params:
- name: source
type: integer
description: "E-Vision 6900: 0=HDMI I, 1=HDMI II, 2=DVI-D, 3=VGA, 4=Component, 5=HDBaseT | Mercury Quad: 0=HDMI 1, 1=HDMI 2, 2=DisplayPort, 3=HDBaseT, 4=3G-SDI"
- id: test_pattern
label: Test Pattern
kind: action
params:
- name: pattern
type: integer
description: "E-Vision 6900: 0=Off,1=White,2=Black,3=Red,4=Green,5=Blue,6=Checkboard,7=CrossHatch,8=V Burst,9=H Burst,10=Color Bar,11=Hramp | Mercury Quad: 0=Off,1=White,2=Black,3=Red,4=Green,5=Blue,6=Checkerboard,7=Crosshatch,8=V Burst,9=H Burst,10=Color Bar,11=Plunge"
- id: zoom_in
label: Zoom In
kind: action
params: []
- id: zoom_out
label: Zoom Out
kind: action
params: []
- id: focus_near
label: Focus Near
kind: action
params: []
- id: focus_far
label: Focus Far
kind: action
params: []
- id: lens_up
label: Lens Up
kind: action
params: []
- id: lens_down
label: Lens Down
kind: action
params: []
- id: lens_left
label: Lens Left
kind: action
params: []
- id: lens_right
label: Lens Right
kind: action
params: []
- id: lens_center
label: Lens Center
kind: action
params: []
- id: lens_load
label: Lens Load
kind: action
params:
- name: slot
type: integer
description: "E-Vision 6900: 0-9 | Mercury Quad: 1-10"
- id: lens_save
label: Lens Save
kind: action
params:
- name: slot
type: integer
description: "E-Vision 6900: 0-9 | Mercury Quad: 1-10"
- id: lens_clear
label: Lens Clear
kind: action
params:
- name: slot
type: integer
description: "E-Vision 6900: 0-9 | Mercury Quad: 1-10"
- id: lens_type
label: Lens Type
kind: action
params:
- name: type
type: integer
description: "0=non-UST Lens, 1=UST Lens"
- id: lens_lock
label: Lens Lock
kind: action
params:
- name: lock
type: integer
description: "0=Off, 1=On"
- id: pic_mode
label: Picture Mode
kind: action
params:
- name: mode
type: integer
description: "0=High Bright, 1=Presentation, 2=Video"
- id: dblack
label: Dynamic Black
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: gamma
label: Gamma
kind: action
params:
- name: value
type: integer
description: "E-Vision 6900: 0=1.0,1=1.8,2=2.0,3=2.2,4=2.35,5=2.5,6=S-curve | Mercury Quad: 0=1.0,1=1.8,2=2.0,3=2.2,4=2.35,5=2.5"
- id: brightness
label: Brightness
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: contrast
label: Contrast
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: saturation
label: Saturation
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hue
label: Hue
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: sharpness
label: Sharpness
kind: action
params:
- name: value
type: integer
description: "E-Vision 6900: 0-31 | Mercury Quad: 0-15"
- id: nr
label: Noise Reduction
kind: action
params:
- name: value
type: integer
description: "E-Vision 6900: 0-15"
- id: nr_temporal
label: Temporal NR
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: 0-3"
- id: nr_block
label: Block NR
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: 0-3"
- id: nr_mosquito
label: Mosquito NR
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: 0-3"
- id: nr_hori
label: Horizontal NR
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: 0-3"
- id: nr_vert
label: Vertical NR
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: 0-3"
- id: nr_reset
label: NR Reset
kind: action
params: []
- id: h_position
label: Horizontal Position
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: v_position
label: Vertical Position
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: vga_phase
label: VGA Phase
kind: action
params:
- name: value
type: integer
description: "0 to 31"
- id: tracking
label: Tracking
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: sync_level
label: Sync Level
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: 0-200"
- id: freeze
label: Freeze
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: resync
label: Resync
kind: action
params: []
- id: vga_auto
label: VGA Auto
kind: action
params: []
- id: color_space
label: Color Space
kind: action
params:
- name: space
type: integer
description: "0=Auto, 1=YPbPr, 2=YCbCr, 3=RGB-PC, 4=RGB-Video"
- id: color_temp
label: Color Temperature
kind: action
params:
- name: temp
type: integer
description: "E-Vision 6900: 0=Native,1=5400K,2=6500K,3=7500K,4=9300K | Mercury Quad: 0=3200K,1=5400K,2=6500K,3=7500K,4=9300K,5=Native"
- id: color_mode
label: Color Mode
kind: action
params:
- name: mode
type: integer
description: "0=ColorMax, 1=Manual Color Matching, 2=Color Temperature, 3=Gains and Lifts"
- id: color_max
label: ColorMax
kind: action
params:
- name: preset
type: integer
description: "0=REC709, 1=EBU, 2=SMPTE, 3=Native, 4=User 1, 5=User 2"
- id: red_lift
label: Red Lift
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: green_lift
label: Green Lift
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: blue_lift
label: Blue Lift
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: red_gain
label: Red Gain
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: green_gain
label: Green Gain
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: blue_gain
label: Blue Gain
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: gainlift_reset
label: Gain/Lift Reset
kind: action
params: []
- id: auto_test_ptrn
label: Auto Test Pattern
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: user_std_rx
label: User Standard Rx
kind: action
params:
- name: value
type: integer
description: "550 to 750"
- id: user_std_ry
label: User Standard Ry
kind: action
params:
- name: value
type: integer
description: "250 to 450"
- id: user_std_gx
label: User Standard Gx
kind: action
params:
- name: value
type: integer
description: "200 to 400"
- id: user_std_gy
label: User Standard Gy
kind: action
params:
- name: value
type: integer
description: "400 to 750"
- id: user_std_bx
label: User Standard Bx
kind: action
params:
- name: value
type: integer
description: "50 to 250"
- id: user_std_by
label: User Standard By
kind: action
params:
- name: value
type: integer
description: "0 to 120"
- id: user_std_wx
label: User Standard Wx
kind: action
params:
- name: value
type: integer
description: "200 to 400"
- id: user_std_wy
label: User Standard Wy
kind: action
params:
- name: value
type: integer
description: "250 to 450"
- id: user_std_reset
label: User Standard Reset
kind: action
params: []
- id: user_target_rx
label: User Target Rx
kind: action
params:
- name: value
type: integer
description: "550 to 750"
- id: user_target_ry
label: User Target Ry
kind: action
params:
- name: value
type: integer
description: "250 to 450"
- id: user_target_gx
label: User Target Gx
kind: action
params:
- name: value
type: integer
description: "200 to 400"
- id: user_target_gy
label: User Target Gy
kind: action
params:
- name: value
type: integer
description: "400 to 750"
- id: user_target_bx
label: User Target Bx
kind: action
params:
- name: value
type: integer
description: "50 to 250"
- id: user_target_by
label: User Target By
kind: action
params:
- name: value
type: integer
description: "0 to 120"
- id: user_target_wx
label: User Target Wx
kind: action
params:
- name: value
type: integer
description: "200 to 400"
- id: user_target_wy
label: User Target Wy
kind: action
params:
- name: value
type: integer
description: "250 to 450"
- id: user_target_cx
label: User Target Cx
kind: action
params:
- name: value
type: integer
description: "125 to 325"
- id: user_target_cy
label: User Target Cy
kind: action
params:
- name: value
type: integer
description: "225 to 425"
- id: user_target_mx
label: User Target Mx
kind: action
params:
- name: value
type: integer
description: "200 to 400"
- id: user_target_my
label: User Target My
kind: action
params:
- name: value
type: integer
description: "50 to 250"
- id: user_target_yx
label: User Target Yx
kind: action
params:
- name: value
type: integer
description: "300 to 500"
- id: user_target_yy
label: User Target Yy
kind: action
params:
- name: value
type: integer
description: "400 to 600"
- id: user_target_reset
label: User Target Reset
kind: action
params: []
- id: user2_target_rx
label: User2 Target Rx
kind: action
params:
- name: value
type: integer
description: "550 to 750"
- id: user2_target_ry
label: User2 Target Ry
kind: action
params:
- name: value
type: integer
description: "250 to 450"
- id: user2_target_gx
label: User2 Target Gx
kind: action
params:
- name: value
type: integer
description: "200 to 400"
- id: user2_target_gy
label: User2 Target Gy
kind: action
params:
- name: value
type: integer
description: "400 to 750"
- id: user2_target_bx
label: User2 Target Bx
kind: action
params:
- name: value
type: integer
description: "50 to 250"
- id: user2_target_by
label: User2 Target By
kind: action
params:
- name: value
type: integer
description: "0 to 120"
- id: user2_target_wx
label: User2 Target Wx
kind: action
params:
- name: value
type: integer
description: "200 to 400"
- id: user2_target_wy
label: User2 Target Wy
kind: action
params:
- name: value
type: integer
description: "250 to 450"
- id: user2_target_cx
label: User2 Target Cx
kind: action
params:
- name: value
type: integer
description: "125 to 325"
- id: user2_target_cy
label: User2 Target Cy
kind: action
params:
- name: value
type: integer
description: "225 to 425"
- id: user2_target_mx
label: User2 Target Mx
kind: action
params:
- name: value
type: integer
description: "200 to 400"
- id: user2_target_my
label: User2 Target My
kind: action
params:
- name: value
type: integer
description: "50 to 250"
- id: user2_target_yx
label: User2 Target Yx
kind: action
params:
- name: value
type: integer
description: "300 to 500"
- id: user2_target_yy
label: User2 Target Yy
kind: action
params:
- name: value
type: integer
description: "400 to 600"
- id: user2_target_reset
label: User2 Target Reset
kind: action
params: []
- id: hsg_hue_r
label: HSG Hue Red
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_hue_g
label: HSG Hue Green
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_hue_b
label: HSG Hue Blue
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_hue_c
label: HSG Hue Cyan
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_hue_m
label: HSG Hue Magenta
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_hue_y
label: HSG Hue Yellow
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_sat_r
label: HSG Saturation Red
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_sat_g
label: HSG Saturation Green
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_sat_b
label: HSG Saturation Blue
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_sat_c
label: HSG Saturation Cyan
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_sat_m
label: HSG Saturation Magenta
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_sat_y
label: HSG Saturation Yellow
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_gain_r
label: HSG Gain Red
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_gain_g
label: HSG Gain Green
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_gain_b
label: HSG Gain Blue
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_gain_c
label: HSG Gain Cyan
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_gain_m
label: HSG Gain Magenta
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_gain_y
label: HSG Gain Yellow
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_white_r
label: HSG White Red
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_white_g
label: HSG White Green
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_white_b
label: HSG White Blue
kind: action
params:
- name: value
type: integer
description: "0 to 200"
- id: hsg_reset
label: HSG Reset
kind: action
params: []
- id: aspect_ratio
label: Aspect Ratio
kind: action
params:
- name: ratio
type: integer
description: "0=5:4, 1=4:3, 2=16:10, 3=16:9, 4=1.88, 5=2.35, 6=Theaterscope, 7=Source, 8=Unscaled"
- id: digi_zoom
label: Digital Zoom
kind: action
params:
- name: value
type: integer
description: "0 to 100"
- id: digi_pan
label: Digital Pan
kind: action
params:
- name: value
type: integer
description: "-320 to +320"
- id: digi_pan_bound
label: Digital Pan Bound
kind: action
params:
- name: value
type: integer
description: "-320 to +320"
- id: digi_scan
label: Digital Scan
kind: action
params:
- name: value
type: integer
description: "-200 to +200"
- id: digi_scan_bound
label: Digital Scan Bound
kind: action
params:
- name: value
type: integer
description: "-200 to +200"
- id: digi_zoom_rst
label: Digital Zoom Reset
kind: action
params: []
- id: overscan
label: Overscan
kind: action
params:
- name: value
type: integer
description: "E-Vision 6900: 0=Off,1=On | Mercury Quad: 0=Off,1=Crop,2=Zoom"
- id: h_keystone
label: Horizontal Keystone
kind: action
params:
- name: value
type: integer
description: "E-Vision 6900: -30 to +30 | Mercury Quad: -600 to +600"
- id: v_keystone
label: Vertical Keystone
kind: action
params:
- name: value
type: integer
description: "E-Vision 6900: -30 to +30 | Mercury Quad: -400 to +400"
- id: rotation
label: Rotation
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: -100 to +100"
- id: h_pin_barrel
label: Horizontal Pin Barrel
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: -150 to +300"
- id: v_pin_barrel
label: Vertical Pin Barrel
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: -150 to +300"
- id: corner_ulx
label: Four Corner Upper Left X
kind: action
params:
- name: value
type: integer
description: "-192 to +192"
- id: corner_uly
label: Four Corner Upper Left Y
kind: action
params:
- name: value
type: integer
description: "-120 to +120"
- id: corner_urx
label: Four Corner Upper Right X
kind: action
params:
- name: value
type: integer
description: "-192 to +192"
- id: corner_ury
label: Four Corner Upper Right Y
kind: action
params:
- name: value
type: integer
description: "-120 to +120"
- id: corner_llx
label: Four Corner Lower Left X
kind: action
params:
- name: value
type: integer
description: "-192 to +192"
- id: corner_lly
label: Four Corner Lower Left Y
kind: action
params:
- name: value
type: integer
description: "-120 to +120"
- id: corner_lrx
label: Four Corner Lower Right X
kind: action
params:
- name: value
type: integer
description: "-192 to +192"
- id: corner_lry
label: Four Corner Lower Right Y
kind: action
params:
- name: value
type: integer
description: "-120 to +120"
- id: arc_top
label: Arc Top
kind: action
params:
- name: value
type: integer
description: "-150 to +150"
- id: arc_bottom
label: Arc Bottom
kind: action
params:
- name: value
type: integer
description: "-150 to +150"
- id: arc_left
label: Arc Left
kind: action
params:
- name: value
type: integer
description: "-150 to +150"
- id: arc_right
label: Arc Right
kind: action
params:
- name: value
type: integer
description: "-150 to +150"
- id: blanking_top
label: Blanking Top
kind: action
params:
- name: value
type: integer
description: "0 to 360"
- id: blanking_bottom
label: Blanking Bottom
kind: action
params:
- name: value
type: integer
description: "0 to 360"
- id: blanking_left
label: Blanking Left
kind: action
params:
- name: value
type: integer
description: "0 to 534"
- id: blanking_right
label: Blanking Right
kind: action
params:
- name: value
type: integer
description: "0 to 534"
- id: blanking_reset
label: Blanking Reset
kind: action
params: []
- id: warp_reset
label: Warp Reset
kind: action
params: []
- id: active_warp
label: Active Warp
kind: action
params:
- name: mode
type: integer
description: "0=none, 1=Keystone, 2=Four Corner, 3=Rotation, 4=Pin/Barrel, 5=Arc"
- id: cust_wp_write
label: Custom Warp Write
kind: action
params:
- name: file
type: integer
description: "1=User 1 file, 2=User 2 file"
- id: cust_wp_clear
label: Custom Warp Clear
kind: action
params:
- name: file
type: integer
description: "1=User 1 file, 2=User 2 file"
- id: cust_wp_send
label: Custom Warp Send
kind: action
params:
- name: mode
type: integer
description: "0=Off, 1=User 1, 2=User 2"
- id: cust_wp_ck_sum
label: Custom Warp Checksum
kind: action
params: []
- id: warp_cust
label: Warp Custom
kind: action
params:
- name: value
type: integer
description: "0=Off, 1=User 1, 2=User 2"
- id: eb_stat
label: Edge Blend Status
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: eb_adl
label: Edge Blend ADL
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: eb_top
label: Edge Blend Top
kind: action
params:
- name: value
type: integer
description: "0, 100 to 500"
- id: eb_bottom
label: Edge Blend Bottom
kind: action
params:
- name: value
type: integer
description: "0, 100 to 500"
- id: eb_left
label: Edge Blend Left
kind: action
params:
- name: value
type: integer
description: "0, 100 to 800"
- id: eb_right
label: Edge Blend Right
kind: action
params:
- name: value
type: integer
description: "0, 100 to 800"
- id: eb_blu_top
label: Edge Blend Blu Top
kind: action
params:
- name: value
type: integer
description: "0 to 32"
- id: eb_blu_btm
label: Edge Blend Blu Bottom
kind: action
params:
- name: value
type: integer
description: "0 to 32"
- id: eb_blu_left
label: Edge Blend Blu Left
kind: action
params:
- name: value
type: integer
description: "0 to 32"
- id: eb_blu_right
label: Edge Blend Blu Right
kind: action
params:
- name: value
type: integer
description: "0 to 32"
- id: eb_all
label: Edge Blend All
kind: action
params:
- name: value
type: integer
description: "0 to 255"
- id: eb_red
label: Edge Blend Red
kind: action
params:
- name: value
type: integer
description: "0 to 255"
- id: eb_green
label: Edge Blend Green
kind: action
params:
- name: value
type: integer
description: "0 to 255"
- id: eb_blue
label: Edge Blend Blue
kind: action
params:
- name: value
type: integer
description: "0 to 255"
- id: eb_reset
label: Edge Blend Reset
kind: action
params: []
- id: format3d
label: 3D Format
kind: action
params:
- name: fmt
type: integer
description: "E-Vision 6900: 0=Off,1=Auto,2=Side-By-Side(Half),3=Top-And-Bottom,4=Frame Sequential | Mercury Quad: 0=Off,1=Auto,2=Side-By-Side(Half),3=Top-And-Bottom,4=Dual-Pipe,5=Frame Sequential"
- id: dlplink
label: DLP Link
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: dominance
label: 3D Dominance
kind: action
params:
- name: value
type: integer
description: "0=Normal, 1=Reverse"
- id: darktime
label: 3D Dark Time
kind: action
params:
- name: value
type: integer
description: "0=0.65ms, 1=1.3ms, 2=1.95ms, 3=2.5ms"
- id: syncoffset
label: 3D Sync Offset
kind: action
params:
- name: value
type: integer
description: "E-Vision 6900: 0-200 | Mercury Quad: 0-60"
- id: syncref
label: 3D Sync Reference
kind: action
params:
- name: ref
type: integer
description: "0=Internal, 1=External"
- id: lamp_mode
label: Lamp Mode
kind: action
params:
- name: mode
type: integer
description: "E-Vision 6900: 0=Dual,1=Single,2=Lamp1,3=Lamp2 | Mercury Quad: 0=Eco,1=Normal,2=Dimming"
- id: lamps
label: Lamps
kind: action
params:
- name: count
type: integer
description: "Mercury Quad: 0=Dual, 1=Triple, 2=Quad"
- id: power_mode
label: Power Mode
kind: action
params:
- name: mode
type: integer
description: "0=Normal, 1=Eco, 2=Custom Power Level"
- id: lamp_power
label: Lamp Power
kind: action
params:
- name: value
type: integer
description: "E-Vision 6900: 0-26 (80%-100%)"
- id: lamp_pow
label: Lamp Power (Mercury)
kind: action
params:
- name: value
type: integer
description: "Mercury Quad: 77-100 (77%-100%)"
- id: altitude
label: Altitude Mode
kind: action
params:
- name: mode
type: integer
description: "E-Vision 6900: 1=Off,2=On | Mercury Quad: 1=On, 2=Auto"
- id: cooling_condition
label: Cooling Condition
kind: action
params:
- name: mode
type: integer
description: "0=Table, 1=Ceiling, 2=Upward, 3=Downward"
- id: orientation
label: Orientation
kind: action
params:
- name: mode
type: integer
description: "E-Vision 6900: 0=Desktop Front,1=Ceiling Front,2=Desktop Rear,3=Ceiling Rear | Mercury Quad adds: 4=Vertical Up, 5=Vertical Down"
- id: screen_setting
label: Screen Setting
kind: action
params:
- name: ratio
type: integer
description: "Mercury Quad: 0=16:10, 1=16:9, 2=4:3"
- id: screen_format
label: Screen Format
kind: action
params:
- name: fmt
type: integer
description: "E-Vision 6900: 0=16:10, 1=16:9, 2=4:3"
- id: screen_shift
label: Screen Shift
kind: action
params:
- name: value
type: integer
description: "Based on screen.format: 16:10=>0, 16:9=>-60~60, 4:3=>-160~160"
- id: auto_poweroff
label: Auto Power Off
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: auto_poweron
label: Auto Power On
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: schedule_power
label: Schedule Power
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: schedule1_on_day
label: Schedule 1 On Day
kind: action
params:
- name: bits
type: integer
description: "Bitmask: Bit6=Sat, Bit5=Fri, Bit4=Thu, Bit3=Wed, Bit2=Tue, Bit1=Mon, Bit0=Sun"
- id: schedule1_off_day
label: Schedule 1 Off Day
kind: action
params:
- name: bits
type: integer
description: "Bitmask: Bit6=Sat, Bit5=Fri, Bit4=Thu, Bit3=Wed, Bit2=Tue, Bit1=Mon, Bit0=Sun"
- id: schedule1_on_time
label: Schedule 1 On Time
kind: action
params:
- name: time
type: string
description: "HH:MM"
- id: schedule1_off_time
label: Schedule 1 Off Time
kind: action
params:
- name: time
type: string
description: "HH:MM"
- id: schedule2_on_day
label: Schedule 2 On Day
kind: action
params:
- name: bits
type: integer
description: "Bitmask"
- id: schedule2_off_day
label: Schedule 2 Off Day
kind: action
params:
- name: bits
type: integer
description: "Bitmask"
- id: schedule2_on_time
label: Schedule 2 On Time
kind: action
params:
- name: time
type: string
description: "HH:MM"
- id: schedule2_off_time
label: Schedule 2 Off Time
kind: action
params:
- name: time
type: string
description: "HH:MM"
- id: date
label: Date
kind: action
params:
- name: value
type: string
description: "yyyy/MM/dd"
- id: time_zone
label: Time Zone
kind: action
params:
- name: zone
type: integer
description: "-11 to +12"
- id: time_adjust
label: Time Adjust
kind: action
params:
- name: time
type: string
description: "HH:MM"
- id: startup_logo
label: Startup Logo
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: blank_screen
label: Blank Screen
kind: action
params:
- name: mode
type: integer
description: "E-Vision 6900: 0=Logo,1=Black,2=Blue | Mercury Quad adds: 3=White"
- id: trig1
label: Trigger 1
kind: action
params:
- name: value
type: integer
description: "0=Off, 1=On | Mercury Quad: 0=Off,1=Screen,2=5:4,3=4:3,4=16:10,5=16:9,6=1.88,7=2.35,8=Theaterscope,9=Source,10=Unscaled,11=RS232,12=RS232 on,13=RS232 off"
- id: trig2
label: Trigger 2
kind: action
params:
- name: value
type: integer
description: "Same as trig1 (Mercury Quad)"
- id: auto_source
label: Auto Source
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: auto_src
label: Auto Source (E-Vision)
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: ir_enable
label: IR Enable
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: ir_code
label: IR Code
kind: action
params:
- name: code
type: integer
description: "00 to 99"
- id: ir_code_rst
label: IR Code Reset
kind: action
params: []
- id: control_id
label: Control ID
kind: action
params:
- name: id
type: integer
description: "00-99 (0=Disable, 1-99=Enable)"
- id: osd_lang
label: OSD Language
kind: action
params:
- name: lang
type: integer
description: "0=English,1=French,2=Spanish,3=German,4=Portuguese,5=CHS,6=CHT,7=Japanese,8=Korean"
- id: osd_menupos
label: OSD Menu Position
kind: action
params:
- name: pos
type: integer
description: "E-Vision 6900: 0=Center,1=Top Left,2=Top Right,3=Bottom Left,4=Bottom Right | Mercury Quad: 0=Top Left,1=Top Right,2=Bottom Left,3=Bottom Right,4=Center"
- id: osd_trans
label: OSD Transparency
kind: action
params:
- name: value
type: integer
description: "0=0%, 1=25%, 2=50%, 3=75%"
- id: osd_timer
label: OSD Timer
kind: action
params:
- name: value
type: integer
description: "0=Always On, 1=10s, 2=30s, 3=60s"
- id: osd_msgbox
label: OSD Message Box
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: recall_mem
label: Recall Memory
kind: action
params:
- name: preset
type: integer
description: "0=Preset A, 1=Preset B, 2=Preset C, 3=Preset D, 4=Default"
- id: save_mem
label: Save Memory
kind: action
params:
- name: preset
type: integer
description: "0=Preset A, 1=Preset B, 2=Preset C, 3=Preset D"
- id: network_mode
label: Network Mode
kind: action
params:
- name: mode
type: integer
description: "0=Projector Control, 1=Service"
- id: lan_power
label: LAN Power
kind: action
params:
- name: state
type: integer
description: "0=On, 1=Off"
- id: lan_dhcp
label: LAN DHCP
kind: action
params:
- name: state
type: integer
description: "0=On, 1=Off"
- id: lan_ip
label: LAN IP Address
kind: action
params:
- name: ip
type: string
description: "xxx.xxx.xxx.xxx"
- id: lan_subnet
label: LAN Subnet
kind: action
params:
- name: subnet
type: string
description: "xxx.xxx.xxx.xxx"
- id: lan_gateway
label: LAN Gateway
kind: action
params:
- name: gateway
type: string
description: "xxx.xxx.xxx.xxx"
- id: lan_dns
label: LAN DNS
kind: action
params:
- name: dns
type: string
description: "xxx.xxx.xxx.xxx"
- id: lan_amx
label: LAN AMX
kind: action
params:
- name: state
type: integer
description: "0=On, 1=Off"
- id: pip_mode
label: PIP Mode
kind: action
params:
- name: mode
type: integer
description: "0=On, 1=Off"
- id: pip_input
label: PIP Input
kind: action
params:
- name: input
type: integer
description: "0=HDMI 1, 1=HDMI 2, 2=RGB(VGA), 3=COMP, 4=DisplayPort, 5=HDBaseT, 6=3G-SDI"
- id: pip_position
label: PIP Position
kind: action
params:
- name: pos
type: integer
description: "0=TopLeft, 1=TopRight, 2=BottomLeft, 3=BottomRight, 4=PBP"
- id: power
label: Power
kind: action
params:
- name: state
type: integer
description: "0=Off, 1=On"
- id: shutter
label: Shutter
kind: action
params:
- name: state
type: integer
description: "0=Open, 1=Close"
- id: pic_mute
label: Picture Mute
kind: action
params:
- name: state
type: integer
description: "0=Open, 1=Close"
- id: factory_reset
label: Factory Reset
kind: action
params: []
# === Brightness-lock / atmospheric / info commands documented in source but not previously enumerated ===
# All keys below appear verbatim in the refined source command table (rows 397-448).
- id: "brt.lock.pw"
label: "brt.lock.pw — Brightness Lock Password (user or supervisor mode)"
kind: action
params:
- name: password
type: string
description: "4 digits = user or supervisor mode password"
- id: "brt.lock.pw.set"
label: "brt.lock.pw.set — Set new user-mode brightness-lock password"
kind: action
params:
- name: new_password
type: string
description: "4 digits = new user mode password"
- id: "brt.lock.level"
label: "brt.lock.level — Brightness Lock Level"
kind: action
params:
- name: level
type: integer
description: "0 = Dual Lamps, 1 = Triple Lamps, 2 = Quad Lamps"
- id: "brt.lock.rst"
label: "brt.lock.rst — Brightness Lock Reset"
kind: action
params: []
- id: "atmos.alti"
label: "atmos.alti — Atmospheric altitude (read-only)"
kind: query
params: []
- id: "atmos.pressure"
label: "atmos.pressure — Atmospheric pressure (read-only)"
kind: query
params: []
- id: "ac.voltage"
label: "ac.voltage — AC voltage range (read-only)"
kind: query
params: []
- id: "ti"
label: "ti — Intake (input) temperature (read-only number)"
kind: query
params: []
- id: "tc"
label: "tc — Core / case temperature (read-only number)"
kind: query
params: []
- id: "fans"
label: "fans — All fan & environment status (read-only)"
kind: query
params: []
- id: "total.hours"
label: "total.hours — Total projector running hours (read-only integer)"
kind: query
params: []
- id: "errcode"
label: "errcode — Error code (read-only string)"
kind: query
params: []
- id: "lan.mac"
label: "lan.mac — LAN MAC address (read-only string)"
kind: query
params: []
- id: "model.name"
label: "model.name — Model name (read-only string)"
kind: query
params: []
- id: "serial"
label: "serial — Serial number (read-only string)"
kind: query
params: []
- id: "sw.version"
label: "sw.version — Software version (read-only string)"
kind: query
params: []
- id: "act.source"
label: "act.source — Active source (read-only string)"
kind: query
params: []
- id: "signal"
label: "signal — Signal description (read-only string)"
kind: query
params: []
- id: "h.refresh"
label: "h.refresh — Horizontal refresh rate (read-only number)"
kind: query
params: []
- id: "v.refresh"
label: "v.refresh — Vertical refresh rate (read-only number)"
kind: query
params: []
Feedbacks
- id: ack_response
label: Acknowledged Response
type: string
description: "Returns ACK or ack followed by command and value on success"
- id: nak_response
label: Negative Acknowledged Response
type: string
description: "Returns NAK or nack followed by error description on failure"
- id: status
label: Power Status
type: enum
values: [0, 1]
description: "E-Vision 6900: 0=Power Off, 1=Power On | Mercury Quad: 0=Standby, 1=Warm Up, 2=Imaging, 3=Cooling, 4=Error"
- id: power_state
label: Power State
type: enum
values: [off, on]
description: "From `power` command"
Variables
# Read-only information fields from INFORMATION section
- id: model_name
type: string
- id: serial
type: string
- id: sw_version
type: string
- id: act_source
type: string
- id: signal
type: string
- id: h_refresh
type: number
- id: v_refresh
type: number
- id: pixel_clock
type: number
- id: lamp1_hours
type: integer
- id: lamp2_hours
type: integer
- id: lamp3_hours
type: integer
- id: lamp4_hours
type: integer
- id: total_hours
type: integer
- id: errcode
type: string
Events
# UNRESOLVED: unsolicited event notifications not documented in source
Macros
# UNRESOLVED: multi-step macros not explicitly documented in source
Safety
confirmation_required_for: []
interlocks:
- "Lens commands only work when projector is switched on"
- "If lens.lock is set to 1, most lens commands are disabled. Exceptions: lens.type (all models), lens.save and lens.clear (Mercury Quad only)"
- "Only one control path at a time should be used - serial and network simultaneously may cause unpredictable behavior"
- "saturation and hue only accepted on E-Vision 6900 when input is YUV"
- "dblack not available in 3D mode"
# UNRESOLVED: power-on sequencing requirements not explicitly stated
Notes
- Serial and TCP/IP are both supported; only one at a time.
- Default IP: 192.168.0.100, TCP port 7000.
- Serial: 9600 baud, 8 data bits, parity/stop bits not stated.
- Command format:
*command operator value+ CR (ASCII 13). Spaces required before operator and value. - Wait for complete response before sending next command.
lens.savequery returns binary string of 0s (empty slots) and 1s (occupied).user.target/user2.targetvalues are multiples of 1000.cust.wp.ck.sumreturns unsigned 32-bit checksum of warp file bytes.- Schedule day parameters use bitmasks (Bit6=Sat through Bit0=Sun).
brightness/contrast/saturation/hueapply only to current image source.
Provenance
source_domains:
- digitalprojection.co.uk
- web.archive.org
source_urls:
- https://digitalprojection.co.uk/dpdownloads/Protocol/Simplified-Protocol-Guide-Rev-H.pdf
- https://web.archive.org/web/20180921001306/http://www.digitalprojection.co.uk:80/dpdownloads/Protocol/Simplified-Protocol-Guide-Rev-H.pdf
retrieved_at: 2026-05-01T01:55:45.642Z
last_checked_at: 2026-06-02T21:41:31.567Z
Verification Summary
verdict: verified
checked_at: 2026-06-02T21:41:31.567Z
matched_actions: 247
action_count: 247
confidence: medium
summary: "All 247 spec actions verified against source. Amend added 20 new entries with the source's literal dotted keys (brt.lock.*, atmos.*, ac.voltage, ti, tc, fans, info read commands lan.mac/model.name/serial/sw.version/act.source/signal/h.refresh/v.refresh/total.hours/errcode). Prior 20 extras now all covered. Transport TCP/IP+Serial confirmed. (11 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "command timing (delay between commands) not stated"
- "power on/off commands not found in source — power state queried via `status"
- "parity not stated"
- "stop bits not stated"
- "flow control not stated"
- "unsolicited event notifications not documented in source"
- "multi-step macros not explicitly documented in source"
- "power-on sequencing requirements not explicitly stated"
- "inter-command delay timing not stated"
- "firmware version compatibility not stated"
- "exact parity and stop bits for RS-232 not stated"
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0