AI4AVSummary
Digital Projection E-Vision Laser 10K professional projector controllable via serial (9,600 bps, 8 data bits) or LAN TCP/IP (default 192.168.0.100, port 7000). Protocol uses ASCII text commands starting with * and ending with carriage return. Operators: = <value> (set), ? (get), +/- (inc/dec where indicated in the source tables), or no operator (execute where documented). ACK/NAK acknowledgement responses. Authentication, serial parity, stop bits and flow control are UNRESOLVED because the source does not specify them.
Transport
protocols:
- serial
- tcp
addressing:
port: 7000 # TCP port; default IP 192.168.0.100
serial:
baud_rate: 9600
data_bits: 8
parity: UNRESOLVED # parity not stated in source
stop_bits: UNRESOLVED # stop bits not stated in source
flow_control: UNRESOLVED # flow control not stated in source
auth:
type: UNRESOLVED # authentication requirements not stated in source
Traits
- powerable
- queryable
- routable
- levelable
Actions
- id: input
label: Input Select
kind: action
command: "*input = {source}"
params:
- name: source
type: integer
description: 0=DisplayPort, 1=HDMI1, 2=HDMI2, 3=HDBaseT, 4=3G-SDI, 5=HDMI3, 6=HDMI4
- id: test_pattern
label: Test Pattern
kind: action
command: "*test.pattern = {pattern}"
params:
- name: pattern
type: integer
description: 0=Off, 1=White, 2=Black, 3=Red, 4=Green, 5=Blue, 6=Cyan, 7=Yellow, 8=Magenta
- id: zoom_in
label: Zoom In
kind: execute
command: "*zoom.in"
params: []
- id: zoom_out
label: Zoom Out
kind: execute
command: "*zoom.out"
params: []
- id: focus_near
label: Focus Near
kind: execute
command: "*focus.near"
params: []
- id: focus_far
label: Focus Far
kind: execute
command: "*focus.far"
params: []
- id: lens_up
label: Lens Up
kind: execute
command: "*lens.up"
params: []
- id: lens_down
label: Lens Down
kind: execute
command: "*lens.down"
params: []
- id: lens_left
label: Lens Left
kind: execute
command: "*lens.left"
params: []
- id: lens_right
label: Lens Right
kind: execute
command: "*lens.right"
params: []
- id: lens_center
label: Lens Center
kind: execute
command: "*lens.center"
params: []
- id: lens_load
label: Lens Load
kind: action
command: "*lens.load = {slot}"
params:
- name: slot
type: integer
description: Memory slot 1-10
- id: lens_save
label: Lens Save
kind: action
command: "*lens.save = {slot}"
params:
- name: slot
type: integer
description: Memory slot 1-10
- id: lens_clear
label: Lens Clear
kind: action
command: "*lens.clear = {slot}"
params:
- name: slot
type: integer
description: Memory slot 1-10
- id: lens_type
label: Lens Type
kind: action
command: "*lens.type = {type}"
params:
- name: type
type: integer
description: 0=non-UST Lens, 1=UST Lens
- id: lens_lock
label: Lens Lock
kind: action
command: "*lens.lock = {lock}"
params:
- name: lock
type: integer
description: 0=Off, 1=On
- id: pic_mode
label: Picture Mode
kind: action
command: "*pic.mode = {mode}"
params:
- name: mode
type: integer
description: 0=High Bright, 1=Presentation, 2=Video
- id: db_on
label: Dynamic Black
kind: action
command: "*db.on = {value}"
params:
- name: value
type: integer
description: 0=Off, 1=On
- id: gamma
label: Gamma
kind: action
command: "*gamma = {value}"
params:
- name: value
type: integer
description: 0=1.0, 1=1.8, 2=2.0, 3=2.2, 4=2.35, 5=2.5, 6=S-curve, 7=DICOM
- id: brightness
label: Brightness
kind: action
command: "*brightness = {value}"
params:
- name: value
type: integer
description: 0-200
- id: contrast
label: Contrast
kind: action
command: "*contrast = {value}"
params:
- name: value
type: integer
description: 0-200
- id: saturation
label: Saturation
kind: action
command: "*saturation = {value}"
params:
- name: value
type: integer
description: 0-200
- id: hue
label: Hue
kind: action
command: "*hue = {value}"
params:
- name: value
type: integer
description: 0-200
- id: sharpness
label: Sharpness
kind: action
command: "*sharpness = {value}"
params:
- name: value
type: integer
description: 0-20
- id: nr_level
label: Noise Reduction Level
kind: action
command: "*nr.level = {value}"
params:
- name: value
type: integer
description: 0-3
- id: nr_temporal
label: Temporal NR
kind: action
command: "*nr.temporal = {value}"
params:
- name: value
type: integer
description: 0-3
- id: nr_block
label: Block NR
kind: action
command: "*nr.block = {value}"
params:
- name: value
type: integer
description: 0-3
- id: nr_mosquito
label: Mosquito NR
kind: action
command: "*nr.mosquito = {value}"
params:
- name: value
type: integer
description: 0-3
- id: nr_hori
label: Horizontal NR
kind: action
command: "*nr.hori = {value}"
params:
- name: value
type: integer
description: 0-3
- id: nr_vert
label: Vertical NR
kind: action
command: "*nr.vert = {value}"
params:
- name: value
type: integer
description: 0-3
- id: nr_reset
label: Noise Reduction Reset
kind: action
command: "*nr.reset"
payload: " = {value}"
description: "Source documents Set and Get with integer values 0-3; execute without an operator is not documented. Append payload to command for Set."
params:
- name: value
type: integer
description: 0-3
- id: h_position
label: Horizontal Position
kind: action
command: "*h.position = {value}"
params:
- name: value
type: integer
description: 0-200
- id: v_position
label: Vertical Position
kind: action
command: "*v.position = {value}"
params:
- name: value
type: integer
description: 0-200
- id: vga_phase
label: VGA Phase
kind: action
command: "*vga.phase = {value}"
params:
- name: value
type: integer
description: 0-31
- id: tracking
label: Tracking
kind: action
command: "*tracking = {value}"
params:
- name: value
type: integer
description: 0-200
- id: sync_level
label: Sync Level
kind: action
command: "*sync.level = {value}"
params:
- name: value
type: integer
description: 0-200
- id: freeze
label: Freeze
kind: action
command: "*freeze = {value}"
params:
- name: value
type: integer
description: 0=Off, 1=On
- id: resync
label: Resync
kind: execute
command: "*resync"
params: []
- id: color_space
label: Color Space
kind: action
command: "*color.space = {value}"
params:
- name: value
type: integer
description: 0=Auto, 1=YPbPr, 2=YCbCr, 3=RGB-PC, 4=RGB-Video
- id: color_temp
label: Color Temperature
kind: action
command: "*color.temp = {value}"
params:
- name: value
type: integer
description: 0=3200K, 1=5400K, 2=6500K, 3=7500K, 4=9300K, 5=Native
- id: color_mode
label: Color Mode
kind: action
command: "*color.mode = {value}"
params:
- name: value
type: integer
description: 0=ColorMax, 1=Manual Color Matching, 2=Color Temperature, 3=Gains and Lifts
- id: color_max
label: ColorMax
kind: action
command: "*color.max = {value}"
params:
- name: value
type: integer
description: 0=HDTV (REC709), 1=Peak, 2=User 1, 3=User 2
- id: red_lift
label: Red Lift
kind: action
command: "*red.lift = {value}"
params:
- name: value
type: integer
description: 0-200
- id: green_lift
label: Green Lift
kind: action
command: "*green.lift = {value}"
params:
- name: value
type: integer
description: 0-200
- id: blue_lift
label: Blue Lift
kind: action
command: "*blue.lift = {value}"
params:
- name: value
type: integer
description: 0-200
- id: red_gain
label: Red Gain
kind: action
command: "*red.gain = {value}"
params:
- name: value
type: integer
description: 0-200
- id: green_gain
label: Green Gain
kind: action
command: "*green.gain = {value}"
params:
- name: value
type: integer
description: 0-200
- id: blue_gain
label: Blue Gain
kind: action
command: "*blue.gain = {value}"
params:
- name: value
type: integer
description: 0-200
- id: gainlift_reset
label: Gain/Lift Reset
kind: execute
command: "*gainlift.reset"
params: []
- id: auto_test_ptrn
label: Auto Test Pattern
kind: action
command: "*auto.test.ptrn = {value}"
params:
- name: value
type: integer
description: 0=Off, 1=On
- id: user_std_rx
label: User Standard Rx
kind: action
command: "*user.std.rx = {value}"
params: [{name: value, type: integer, description: 550-750}]
- id: user_std_ry
label: User Standard Ry
kind: action
command: "*user.std.ry = {value}"
params: [{name: value, type: integer, description: 250-450}]
- id: user_std_gx
label: User Standard Gx
kind: action
command: "*user.std.gx = {value}"
params: [{name: value, type: integer, description: 200-400}]
- id: user_std_gy
label: User Standard Gy
kind: action
command: "*user.std.gy = {value}"
params: [{name: value, type: integer, description: 400-750}]
- id: user_std_bx
label: User Standard Bx
kind: action
command: "*user.std.bx = {value}"
params: [{name: value, type: integer, description: 50-250}]
- id: user_std_by
label: User Standard By
kind: action
command: "*user.std.by = {value}"
params: [{name: value, type: integer, description: 0-120}]
- id: user_std_wx
label: User Standard Wx
kind: action
command: "*user.std.wx = {value}"
params: [{name: value, type: integer, description: 200-400}]
- id: user_std_wy
label: User Standard Wy
kind: action
command: "*user.std.wy = {value}"
params: [{name: value, type: integer, description: 250-450}]
- id: user_std_reset
label: User Standard Reset
kind: execute
command: "*user.std.reset"
params: []
- id: user_target_rx
label: User 1 Target Rx
kind: action
command: "*user.target.rx = {value}"
params: [{name: value, type: integer, description: 550-750}]
- id: user_target_ry
label: User 1 Target Ry
kind: action
command: "*user.target.ry = {value}"
params: [{name: value, type: integer, description: 250-450}]
- id: user_target_gx
label: User 1 Target Gx
kind: action
command: "*user.target.gx = {value}"
params: [{name: value, type: integer, description: 200-400}]
- id: user_target_gy
label: User 1 Target Gy
kind: action
command: "*user.target.gy = {value}"
params: [{name: value, type: integer, description: 400-750}]
- id: user_target_bx
label: User 1 Target Bx
kind: action
command: "*user.target.bx = {value}"
params: [{name: value, type: integer, description: 50-250}]
- id: user_target_by
label: User 1 Target By
kind: action
command: "*user.target.by = {value}"
params: [{name: value, type: integer, description: 0-120}]
- id: user_target_wx
label: User 1 Target Wx
kind: action
command: "*user.target.wx = {value}"
params: [{name: value, type: integer, description: 200-400}]
- id: user_target_wy
label: User 1 Target Wy
kind: action
command: "*user.target.wy = {value}"
params: [{name: value, type: integer, description: 250-450}]
- id: user_target_cx
label: User 1 Target Cx
kind: action
command: "*user.target.cx = {value}"
params: [{name: value, type: integer, description: 125-325}]
- id: user_target_cy
label: User 1 Target Cy
kind: action
command: "*user.target.cy = {value}"
params: [{name: value, type: integer, description: 225-425}]
- id: user_target_mx
label: User 1 Target Mx
kind: action
command: "*user.target.mx = {value}"
params: [{name: value, type: integer, description: 200-400}]
- id: user_target_my
label: User 1 Target My
kind: action
command: "*user.target.my = {value}"
params: [{name: value, type: integer, description: 50-250}]
- id: user_target_yx
label: User 1 Target Yx
kind: action
command: "*user.target.yx = {value}"
params: [{name: value, type: integer, description: 300-500}]
- id: user_target_yy
label: User 1 Target Yy
kind: action
command: "*user.target.yy = {value}"
params: [{name: value, type: integer, description: 400-600}]
- id: user_target_reset
label: User 1 Target Reset
kind: execute
command: "*user.target.reset"
params: []
- id: user2_target_rx
label: User 2 Target Rx
kind: action
command: "*user2.target.rx = {value}"
params: [{name: value, type: integer, description: 550-750}]
- id: user2_target_ry
label: User 2 Target Ry
kind: action
command: "*user2.target.ry = {value}"
params: [{name: value, type: integer, description: 250-450}]
- id: user2_target_gx
label: User 2 Target Gx
kind: action
command: "*user2.target.gx = {value}"
params: [{name: value, type: integer, description: 200-400}]
- id: user2_target_gy
label: User 2 Target Gy
kind: action
command: "*user2.target.gy = {value}"
params: [{name: value, type: integer, description: 400-750}]
- id: user2_target_bx
label: User 2 Target Bx
kind: action
command: "*user2.target.bx = {value}"
params: [{name: value, type: integer, description: 50-250}]
- id: user2_target_by
label: User 2 Target By
kind: action
command: "*user2.target.by = {value}"
params: [{name: value, type: integer, description: 0-120}]
- id: user2_target_wx
label: User 2 Target Wx
kind: action
command: "*user2.target.wx = {value}"
params: [{name: value, type: integer, description: 200-400}]
- id: user2_target_wy
label: User 2 Target Wy
kind: action
command: "*user2.target.wy = {value}"
params: [{name: value, type: integer, description: 250-450}]
- id: user2_target_cx
label: User 2 Target Cx
kind: action
command: "*user2.target.cx = {value}"
params: [{name: value, type: integer, description: 125-325}]
- id: user2_target_cy
label: User 2 Target Cy
kind: action
command: "*user2.target.cy = {value}"
params: [{name: value, type: integer, description: 225-425}]
- id: user2_target_mx
label: User 2 Target Mx
kind: action
command: "*user2.target.mx = {value}"
params: [{name: value, type: integer, description: 200-400}]
- id: user2_target_my
label: User 2 Target My
kind: action
command: "*user2.target.my = {value}"
params: [{name: value, type: integer, description: 50-250}]
- id: user2_target_yx
label: User 2 Target Yx
kind: action
command: "*user2.target.yx = {value}"
params: [{name: value, type: integer, description: 300-500}]
- id: user2_target_yy
label: User 2 Target Yy
kind: action
command: "*user2.target.yy = {value}"
params: [{name: value, type: integer, description: 400-600}]
- id: user2_target_reset
label: User 2 Target Reset
kind: execute
command: "*user2.target.reset"
params: []
- id: user_p7_rst
label: User P7 Reset
kind: execute
command: "*user.p7.rst"
params: []
- id: hsg_hue_r
label: HSG Hue Red
kind: action
command: "*hsg.hue.r = {value}"
params: [{name: value, type: integer, description: 0-200}]
- id: hsg_hue_g
label: HSG Hue Green
kind: action
command: "*hsg.hue.g = {value}"
params: [{name: value, type: integer, description: 0-200}]
- id: hsg_hue_b
label: HSG Hue Blue
kind: action
command: "*hsg.hue.b = {value}"
params: [{name: value, type: integer, description: 0-200}]
- id: hsg_hue_c
label: HSG Hue Cyan
kind: action
command: "*hsg.hue.c = {value}"
params: [{name: value, type: integer, description: 0-200}]
- id: hsg_hue_m
label: HSG Hue Magenta
kind: action
command: "*hsg.hue.m = {value}"
params: [{name: value, type: integer, description: 0-200}]
- id: hsg_hue_y
label: HSG Hue Yellow
kind: action
command: "*hsg.hue.y = {value}"
params: [{name: value, type: integer, description: 0-200}]
- id: hsg_sat_r
label: HSG Saturation Red
kind: action
command: "*hsg.sat.r = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_sat_g
label: HSG Saturation Green
kind: action
command: "*hsg.sat.g = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_sat_b
label: HSG Saturation Blue
kind: action
command: "*hsg.sat.b = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_sat_c
label: HSG Saturation Cyan
kind: action
command: "*hsg.sat.c = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_sat_m
label: HSG Saturation Magenta
kind: action
command: "*hsg.sat.m = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_sat_y
label: HSG Saturation Yellow
kind: action
command: "*hsg.sat.y = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_gain_r
label: HSG Gain Red
kind: action
command: "*hsg.gain.r = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_gain_g
label: HSG Gain Green
kind: action
command: "*hsg.gain.g = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_gain_b
label: HSG Gain Blue
kind: action
command: "*hsg.gain.b = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_gain_c
label: HSG Gain Cyan
kind: action
command: "*hsg.gain.c = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_gain_m
label: HSG Gain Magenta
kind: action
command: "*hsg.gain.m = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_gain_y
label: HSG Gain Yellow
kind: action
command: "*hsg.gain.y = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_white_r
label: HSG White Red
kind: action
command: "*hsg.white.r = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_white_g
label: HSG White Green
kind: action
command: "*hsg.white.g = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_white_b
label: HSG White Blue
kind: action
command: "*hsg.white.b = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: hsg_reset
label: HSG Reset
kind: execute
command: "*hsg.reset"
params: []
- id: aspect_ratio
label: Aspect Ratio
kind: action
command: "*aspect.ratio = {ratio}"
params:
- name: ratio
type: integer
description: 0=5:4, 1=4:3, 2=16:10, 3=16:9, 4=1.88, 5=2.35, 6=Theaterscope, 7=Source, 8=Unscaled
- id: digi_zoom
label: Digital Zoom
kind: action
command: "*digi.zoom = {value}"
params: [{name: value, type: integer, description: 0-100}]
- id: digi_pan
label: Digital Pan
kind: action
command: "*digi.pan = {value}"
params: [{name: value, type: integer, description: -320 to +320}]
- id: digi_pan_bound
label: Digital Pan Bounds
kind: query
command: "*digi.pan.bound ?"
params: []
- id: digi_scan
label: Digital Scan
kind: action
command: "*digi.scan = {value}"
params: [{name: value, type: integer, description: -200 to +200}]
- id: digi_scan_bound
label: Digital Scan Bounds
kind: query
command: "*digi.scan.bound ?"
params: []
- id: digi_zoom_rst
label: Digital Zoom Reset
kind: execute
command: "*digi.zoom.rst"
params: []
- id: overscan
label: Overscan
kind: action
command: "*overscan = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=Crop, 2=Zoom"}]
- id: h_keystone
label: Horizontal Keystone
kind: action
command: "*h.keystone = {value}"
params: [{name: value, type: integer, description: -600 to +600}]
- id: v_keystone
label: Vertical Keystone
kind: action
command: "*v.keystone = {value}"
params: [{name: value, type: integer, description: -400 to +400}]
- id: keystone_reset
label: Keystone Reset
kind: execute
command: "*keystone.reset"
params: []
- id: rotation
label: Rotation
kind: action
command: "*rotation = {value}"
params: [{name: value, type: integer, description: -100 to +100}]
- id: rotation_reset
label: Rotation Reset
kind: execute
command: "*rotation.reset"
params: []
- id: h_pin_barrel
label: Horizontal Pin/Barrel
kind: action
command: "*h.pin.barrel = {value}"
params: [{name: value, type: integer, description: -150 to +300}]
- id: v_pin_barrel
label: Vertical Pin/Barrel
kind: action
command: "*v.pin.barrel = {value}"
params: [{name: value, type: integer, description: -150 to +300}]
- id: pin_barrel_reset
label: Pin/Barrel Reset
kind: execute
command: "*pin.barrel.reset"
params: []
- id: four_corner_ulx
label: 4-Corner UL X
kind: action
command: "*4corner.ulx = {value}"
params: [{name: value, type: integer, description: -192 to +192}]
- id: four_corner_uly
label: 4-Corner UL Y
kind: action
command: "*4corner.uly = {value}"
params: [{name: value, type: integer, description: -120 to +120}]
- id: four_corner_urx
label: 4-Corner UR X
kind: action
command: "*4corner.urx = {value}"
params: [{name: value, type: integer, description: -192 to +192}]
- id: four_corner_ury
label: 4-Corner UR Y
kind: action
command: "*4corner.ury = {value}"
params: [{name: value, type: integer, description: -120 to +120}]
- id: four_corner_llx
label: 4-Corner LL X
kind: action
command: "*4corner.llx = {value}"
params: [{name: value, type: integer, description: -192 to +192}]
- id: four_corner_lly
label: 4-Corner LL Y
kind: action
command: "*4corner.lly = {value}"
params: [{name: value, type: integer, description: -120 to +120}]
- id: four_corner_lrx
label: 4-Corner LR X
kind: action
command: "*4corner.lrx = {value}"
params: [{name: value, type: integer, description: -192 to +192}]
- id: four_corner_lry
label: 4-Corner LR Y
kind: action
command: "*4corner.lry = {value}"
params: [{name: value, type: integer, description: -120 to +120}]
- id: four_corner_reset
label: 4-Corner Reset
kind: execute
command: "*4corner.reset"
params: []
- id: arc_top
label: Arc Top
kind: action
command: "*arc.top = {value}"
params: [{name: value, type: integer, description: -150 to +150}]
- id: arc_bottom
label: Arc Bottom
kind: action
command: "*arc.bottom = {value}"
params: [{name: value, type: integer, description: -150 to +150}]
- id: arc_left
label: Arc Left
kind: action
command: "*arc.left = {value}"
params: [{name: value, type: integer, description: -150 to +150}]
- id: arc_right
label: Arc Right
kind: action
command: "*arc.right = {value}"
params: [{name: value, type: integer, description: -150 to +150}]
- id: arc_t
label: Arc T (top curvature)
kind: action
command: "*arc.t = {value}"
params: [{name: value, type: integer, description: -192 to +192}]
- id: arc_b
label: Arc B (bottom curvature)
kind: action
command: "*arc.b = {value}"
params: [{name: value, type: integer, description: -120 to +120}]
- id: arc_l
label: Arc L (left curvature)
kind: action
command: "*arc.l = {value}"
params: [{name: value, type: integer, description: -192 to +192}]
- id: arc_r
label: Arc R (right curvature)
kind: action
command: "*arc.r = {value}"
params: [{name: value, type: integer, description: -120 to +120}]
- id: arc_reset
label: Arc Reset
kind: execute
command: "*arc.reset"
params: []
- id: blanking_top
label: Blanking Top
kind: action
command: "*blanking.top = {value}"
params: [{name: value, type: integer, description: 0-360}]
- id: blanking_bottom
label: Blanking Bottom
kind: action
command: "*blanking.bottom = {value}"
params: [{name: value, type: integer, description: 0-360}]
- id: blanking_left
label: Blanking Left
kind: action
command: "*blanking.left = {value}"
params: [{name: value, type: integer, description: 0-534}]
- id: blanking_right
label: Blanking Right
kind: action
command: "*blanking.right = {value}"
params: [{name: value, type: integer, description: 0-534}]
- id: blanking_reset
label: Blanking Reset
kind: execute
command: "*blanking.reset"
params: []
- id: warp_reset
label: Warp Reset
kind: execute
command: "*warp.reset"
params: []
- id: active_warp
label: Active Warp
kind: action
command: "*active.warp = {value}"
params: [{name: value, type: integer, description: "0=none, 1=Keystone, 2=Four Corner, 3=Rotation, 4=Pin/Barrel, 5=Arc"}]
- id: cust_wp_write
label: Custom Warp Write
kind: action
command: "*cust.wp.write = {value}"
params: [{name: value, type: integer, description: "1=User 1 file, 2=User 2 file"}]
- id: cust_wp_clear
label: Custom Warp Clear
kind: action
command: "*cust.wp.clear = {value}"
params: [{name: value, type: integer, description: "1=User 1 file, 2=User 2 file"}]
- id: cust_wp_send
label: Custom Warp Send
kind: action
command: "*cust.wp.send = {value}"
params: [{name: value, type: integer, description: "0=off, 1=User 1 file, 2=User 2 file"}]
- id: cust_wp_ck_sum
label: Custom Warp Checksum
kind: query
command: "*cust.wp.ck.sum ?"
params: []
- id: warp_cust
label: Warp Custom
kind: action
command: "*warp.cust = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=User 1, 2=User 2"}]
- id: eb_stat
label: Edge Blend Status
kind: action
command: "*eb.stat = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: eb_adl
label: Edge Blend Auto Level
kind: action
command: "*eb.adl = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: eb_top
label: Edge Blend Top
kind: action
command: "*eb.top = {value}"
params: [{name: value, type: integer, description: "0, 100-500"}]
- id: eb_bottom
label: Edge Blend Bottom
kind: action
command: "*eb.bottom = {value}"
params: [{name: value, type: integer, description: "0, 100-500"}]
- id: eb_left
label: Edge Blend Left
kind: action
command: "*eb.left = {value}"
params: [{name: value, type: integer, description: "0, 100-500"}]
- id: eb_right
label: Edge Blend Right
kind: action
command: "*eb.right = {value}"
params: [{name: value, type: integer, description: "0, 100-500"}]
- id: eb_blu_top
label: Edge Blend Blue Top
kind: action
command: "*eb.blu.top = {value}"
params: [{name: value, type: integer, description: 0-32}]
- id: eb_blu_btm
label: Edge Blend Blue Bottom
kind: action
command: "*eb.blu.btm = {value}"
params: [{name: value, type: integer, description: 0-32}]
- id: eb_blu_left
label: Edge Blend Blue Left
kind: action
command: "*eb.blu.left = {value}"
params: [{name: value, type: integer, description: 0-32}]
- id: eb_blu_right
label: Edge Blend Blue Right
kind: action
command: "*eb.blu.right = {value}"
params: [{name: value, type: integer, description: 0-32}]
- id: eb_all
label: Edge Blend All (inc/dec)
kind: action
command: "*eb.all {op} {value}"
params:
- name: op
type: string
description: '"+" or "-"'
- name: value
type: integer
description: 0-32
- id: eb_red
label: Edge Blend Red
kind: action
command: "*eb.red = {value}"
params: [{name: value, type: integer, description: 0-32}]
- id: eb_green
label: Edge Blend Green
kind: action
command: "*eb.green = {value}"
params: [{name: value, type: integer, description: 0-32}]
- id: eb_blue
label: Edge Blend Blue
kind: action
command: "*eb.blue = {value}"
params: [{name: value, type: integer, description: 0-32}]
- id: eb_reset
label: Edge Blend Reset
kind: execute
command: "*eb.reset"
params: []
- id: threed_format
label: 3D Format
kind: action
command: "*3d.format = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=Auto, 2=Side-By-Side, 3=Top-And-Bottom, 4=Dual-Pipe, 5=Frame Sequential"}]
- id: threed_dlplink
label: 3D DLP Link
kind: action
command: "*3d.dlplink = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: threed_dominance
label: 3D Dominance
kind: action
command: "*3d.dominance = {value}"
params: [{name: value, type: integer, description: "0=Normal, 1=Reverse"}]
- id: threed_darktime
label: 3D Dark Time
kind: action
command: "*3d.darktime = {value}"
params: [{name: value, type: integer, description: "0=0.65ms, 1=1.3ms, 2=1.95ms"}]
- id: threed_syncoffset
label: 3D Sync Offset
kind: action
command: "*3d.syncoffset = {value}"
params: [{name: value, type: integer, description: 0-60}]
- id: threed_syncref
label: 3D Sync Reference
kind: query
command: "*3d.syncref ?"
params: []
- id: laser_mode
label: Laser Mode
kind: action
command: "*laser.mode = {value}"
params: [{name: value, type: integer, description: "0=Eco, 1=Normal, 2=Custom"}]
- id: laser_power
label: Laser Power
kind: action
command: "*laser.power = {value}"
params: [{name: value, type: integer, description: 20-100 (only when laser.mode=2)}]
- id: laser_hours
label: Laser Hours
kind: query
command: "*laser.hours ?"
params: []
- id: altitude
label: Altitude
kind: action
command: "*altitude = {value}"
params: [{name: value, type: integer, description: "0=On, 1=Auto, 2=Quiet"}]
- id: cooling_condition
label: Cooling Condition
kind: action
command: "*cooling.condition = {value}"
params: [{name: value, type: integer, description: "0=Table, 1=Ceiling, 2=Freetilt, 3=Auto"}]
- id: orientation
label: Orientation
kind: action
command: "*orientation = {value}"
params: [{name: value, type: integer, description: "0=Desktop Front, 1=Ceiling Front, 2=Desktop Rear, 3=Ceiling Rear, 4=Auto-front"}]
- id: screen_setting
label: Screen Setting
kind: action
command: "*screen.setting = {value}"
params: [{name: value, type: integer, description: "0=16:10, 1=16:9, 2=4:3"}]
- id: auto_poweroff
label: Auto Power Off
kind: action
command: "*auto.poweroff = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: auto_poweron
label: Auto Power On
kind: action
command: "*auto.poweron = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: schedule_power
label: Schedule Power
kind: action
command: "*schedule.power = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: schedule1_on_day
label: Schedule 1 On Day
kind: action
command: "*schedule1.on.day = {value}"
params: [{name: value, type: string, description: "UNRESOLVED: source prints 76543210 and maps Bit6=Sat through Bit0=Sun; exact wire encoding and Bit7 meaning are not specified"}]
- id: schedule1_off_day
label: Schedule 1 Off Day
kind: action
command: "*schedule1.off.day = {value}"
params: [{name: value, type: string, description: "UNRESOLVED: source prints 76543210 and maps Bit6=Sat through Bit0=Sun; exact wire encoding and Bit7 meaning are not specified"}]
- id: schedule1_on_time
label: Schedule 1 On Time
kind: action
command: "*schedule1.on.time = {value}"
params: [{name: value, type: string, description: "HH:MM"}]
- id: schedule1_off_time
label: Schedule 1 Off Time
kind: action
command: "*schedule1.off.time = {value}"
params: [{name: value, type: string, description: "HH:MM"}]
- id: schedule2_on_day
label: Schedule 2 On Day
kind: action
command: "*schedule2.on.day = {value}"
params: [{name: value, type: string, description: "UNRESOLVED: source prints 76543210 and maps Bit6=Sat through Bit0=Sun; exact wire encoding and Bit7 meaning are not specified"}]
- id: schedule2_off_day
label: Schedule 2 Off Day
kind: action
command: "*schedule2.off.day = {value}"
params: [{name: value, type: string, description: "UNRESOLVED: source prints 76543210 and maps Bit6=Sat through Bit0=Sun; exact wire encoding and Bit7 meaning are not specified"}]
- id: schedule2_on_time
label: Schedule 2 On Time
kind: action
command: "*schedule2.on.time = {value}"
params: [{name: value, type: string, description: "HH:MM"}]
- id: schedule2_off_time
label: Schedule 2 Off Time
kind: action
command: "*schedule2.off.time = {value}"
params: [{name: value, type: string, description: "HH:MM"}]
- id: date
label: Date
kind: action
command: "*date = {value}"
params: [{name: value, type: string, description: "yyyy/MM/dd"}]
- id: time_zone
label: Time Zone
kind: action
command: "*time.zone = {value}"
params: [{name: value, type: integer, description: -11 to +12}]
- id: time_adjust
label: Time Adjust
kind: action
command: "*time.adjust = {value}"
params: [{name: value, type: string, description: "HH:MM"}]
- id: startup_logo
label: Startup Logo
kind: action
command: "*startup.logo = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: blank_screen
label: Blank Screen
kind: action
command: "*blank.screen = {value}"
params: [{name: value, type: integer, description: "0=Logo, 1=Black, 2=Blue, 3=White"}]
- id: trig_1
label: Trigger 1
kind: action
command: "*trig.1 = {value}"
params: [{name: value, type: integer, description: "0=Off,1=Screen,2=5:4,3=4:3,4=16:10,5=16:9,6=1.88,7=2.35,8=Theaterscope,9=Source,10=Unscaled,11=RS232,12=RS232on,13=RS232off"}]
- id: trig_2
label: Trigger 2
kind: action
command: "*trig.2 = {value}"
params: [{name: value, type: integer, description: "0=Off,1=Screen,2=5:4,3=4:3,4=16:10,5=16:9,6=1.88,7=2.35,8=Theaterscope,9=Source,10=Unscaled,11=RS232,12=RS232on,13=RS232off"}]
- id: auto_source
label: Auto Source
kind: action
command: "*auto.source = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: ir_enable
label: IR Enable
kind: action
command: "*ir.enable = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: ir_code
label: IR Code
kind: action
command: "*ir.code = {value}"
params: [{name: value, type: integer, description: "00-99"}]
- id: ir_code_rst
label: IR Code Reset
kind: execute
command: "*ir.code.rst"
params: []
- id: osd_lang
label: OSD Language
kind: action
command: "*osd.lang = {value}"
params: [{name: value, type: integer, description: "0=English,1=French,2=German,3=Spanish,4=Simplified Chinese"}]
- id: osd_menupos
label: OSD Menu Position
kind: action
command: "*osd.menupos = {value}"
params: [{name: value, type: integer, description: "0=TopLeft,1=TopRight,2=BottomLeft,3=BottomRight,4=Center"}]
- id: osd_trans
label: OSD Transparency
kind: action
command: "*osd.trans = {value}"
params: [{name: value, type: integer, description: "0=0%,1=25%,2=50%,3=75%"}]
- id: osd_timer
label: OSD Timer
kind: action
command: "*osd.timer = {value}"
params: [{name: value, type: integer, description: "0=AlwaysOn,1=10s,2=30s,3=60s"}]
- id: osd_msgbox
label: OSD Message Box
kind: action
command: "*osd.msgbox = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: recall_mem
label: Recall Preset
kind: action
command: "*recall.mem = {value}"
params: [{name: value, type: integer, description: "0=PresetA,1=PresetB,2=PresetC,3=PresetD,4=Default"}]
- id: save_mem
label: Save Preset
kind: action
command: "*save.mem = {value}"
params: [{name: value, type: integer, description: "0=PresetA,1=PresetB,2=PresetC,3=PresetD"}]
- id: network_mode
label: Network Mode
kind: action
command: "*network.mode = {value}"
params: [{name: value, type: integer, description: "0=Projector Control, 1=Service"}]
- id: standby_power
label: Standby Power
kind: action
command: UNRESOLVED
description: "UNRESOLVED: source lists standby.power values but leaves every operator column empty; no Set, Get or Execute wire form is established."
params: [{name: value, type: integer, description: "0=Save, 1=Eco, 2=Normal; values listed by source, operation support UNRESOLVED"}]
- id: lan_power
label: LAN Power
kind: action
command: "*lan.power = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: lan_dhcp
label: LAN DHCP
kind: action
command: "*lan.dhcp = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: lan_ip
label: LAN IP Address
kind: action
command: "*lan.ip = {value}"
params: [{name: value, type: string, description: "xxx.xxx.xxx.xxx"}]
- id: lan_subnet
label: LAN Subnet
kind: action
command: "*lan.subnet = {value}"
params: [{name: value, type: string, description: "xxx.xxx.xxx.xxx"}]
- id: lan_gateway
label: LAN Gateway
kind: action
command: "*lan.gateway = {value}"
params: [{name: value, type: string, description: "xxx.xxx.xxx.xxx"}]
- id: lan_dns
label: LAN DNS
kind: action
command: "*lan.dns = {value}"
params: [{name: value, type: string, description: "xxx.xxx.xxx.xxx"}]
- id: lan_mac
label: LAN MAC
kind: query
command: "*lan.mac ?"
params: []
set_command: "*lan.mac"
set_payload: " = {value}"
set_params:
- name: value
type: string
description: "String; UNRESOLVED: exact MAC address encoding and validation constraints are not specified in source"
description: "Source supports both Set and Get. The existing command is the polling query; concatenate set_command and set_payload for Set."
- id: lan_amx
label: LAN AMX
kind: action
command: "*lan.amx = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: pip_mode
label: PIP Mode
kind: action
command: "*pip.mode = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: pip_input
label: PIP Input
kind: action
command: "*pip.input = {value}"
params: [{name: value, type: integer, description: "0=DisplayPort,1=HDMI1,2=HDMI2,3=HDBaseT,4=3G-SDI"}]
- id: pip_position
label: PIP Position
kind: action
command: "*pip.position = {value}"
params: [{name: value, type: integer, description: "0=TopLeft,1=TopRight,2=BottomLeft,3=BottomRight,4=PBP"}]
- id: pip_swap
label: PIP Swap
kind: execute
command: "*pip.swap"
params: []
- id: power
label: Power
kind: action
command: "*power = {value}"
params: [{name: value, type: integer, description: "0=Off, 1=On"}]
- id: shutter
label: Shutter
kind: action
command: "*shutter = {value}"
params: [{name: value, type: integer, description: "0=Open, 1=Close"}]
- id: laser_reset
label: Laser Reset
kind: execute
command: "*laser.reset"
params: []
- id: cw_index
label: CW Index
kind: action
command: "*cw.index = {value}"
params: [{name: value, type: integer, description: "0, 100-1000"}]
- id: pw_index
label: PW Index
kind: action
command: "*pw.index = {value}"
params: [{name: value, type: integer, description: "0, 100-1000"}]
- id: dlp_pattern
label: DLP Pattern
kind: action
command: "*dlp.pattern = {value}"
params: [{name: value, type: integer, description: "0=Off,1=White,2=Black,3=Red,4=Green,5=Blue,6=Cyan,7=Magenta,8=Yellow,9=Checkboard,10=Vramp,11=Hramp,12=Grid,13=Cross,14=FPGA_TP_Calibration"}]
- id: pri_reset
label: Primary Reset
kind: execute
command: "*pri.reset"
params: []
- id: mfg_reset
label: Manufacturing Reset
kind: execute
command: "*mfg.reset"
params: []
- id: sp_index
label: SP Index
kind: action
command: "*sp.index = {value}"
params: [{name: value, type: integer, description: "0, 0-4096"}]
- id: sp_index_v
label: SP Index V
kind: action
command: "*sp.index.v = {value}"
params: [{name: value, type: integer, description: "0, 0-4096"}]
- id: sp_index_h
label: SP Index H
kind: action
command: "*sp.index.h = {value}"
params: [{name: value, type: integer, description: "0, 0-4096"}]
- id: sp_t1
label: SP T1
kind: action
command: "*sp.t1 = {value}"
params: [{name: value, type: integer, description: "0, 0-4096"}]
- id: sp_t2
label: SP T2
kind: action
command: "*sp.t2 = {value}"
params: [{name: value, type: integer, description: "0, 0-4096"}]
- id: factory_reset
label: Factory Reset
kind: execute
command: "*factory.reset"
params: []
- id: eb_blu_bottom
label: Edge Blend Blue Bottom
kind: action
command: "eb.blu.bottom"
payload: " = {value}"
description: "Literal source command token. Prepend an asterisk and append the substituted payload and ASCII carriage return for Set. Its relationship to eb.blu.btm is UNRESOLVED."
params:
- name: value
type: integer
description: 0 to 32 (integer)
Feedbacks
- id: ack_response
label: ACK
type: string
description: '"ACK <command> = <value>" or "ack <command> = <value>"'
- id: nak_response
label: NAK
type: string
description: '"NAK" or "nack", followed by a brief problem description'
- id: model_name
label: Model Name
type: string
query_command: "model.name"
- id: serial
label: Serial Number
type: string
query_command: "serial"
- id: sw_version
label: Software Version
type: string
query_command: "sw.version"
- id: sw1_version
label: SW1 Version
type: string
query_command: "sw1.version"
- id: sw2_version
label: SW2 Version
type: string
query_command: "sw2.version"
- id: sw3_version
label: SW3 Version
type: string
query_command: "sw3.version"
- id: act_source
label: Active Source
type: string
query_command: "act.source"
- id: signal
label: Signal
type: string
query_command: "signal"
- id: h_refresh
label: Horizontal Refresh
type: number
query_command: "h.refresh"
- id: v_refresh
label: Vertical Refresh
type: number
query_command: "v.refresh"
- id: pixel_clock
label: Pixel Clock
type: number
query_command: "pixel.clock"
- id: laser_hours
label: Laser Hours
type: integer
query_command: "laser.hours"
- id: atmos_alti
label: Atmospheric Altitude
type: number
query_command: "atmos.alti"
- id: atmos_pressure
label: Atmospheric Pressure
type: number
query_command: "atmos.pressure"
- id: ac_voltage
label: AC Voltage Range
type: enum
query_command: "ac.voltage"
values: ["90-150", "160-264"]
- id: g_ceiling
label: Gravity Ceiling Sensor
type: enum
query_command: "g.ceiling"
values: [table, ceiling]
- id: g_portrait
label: Gravity Portrait
type: number
query_command: "g.portrait"
- id: g_tilt
label: Gravity Tilt
type: number
query_command: "g.tilt"
- id: altitude_info
label: Altitude Info
type: enum
query_command: "altitude.info"
values: [low, high]
- id: laser_power_info
label: Laser Power Info
type: number
query_command: "laser.power.info"
- id: ti
label: Temperature TI
type: number
query_command: "ti"
- id: ti2
label: Temperature TI2
type: number
query_command: "ti2"
- id: tc
label: Temperature TC
type: number
query_command: "tc"
- id: tb1
label: Temperature TB1
type: number
query_command: "tb1"
- id: tb2
label: Temperature TB2
type: number
query_command: "tb2"
- id: fan1_3
label: Fan 1-3 Speed
type: string
query_command: "fan1_3"
description: "xxxx / xxxx / xxxx"
- id: fan4_6
label: Fan 4-6 Speed
type: string
query_command: "fan4_6"
- id: fan7_9
label: Fan 7-9 Speed
type: string
query_command: "fan7_9"
- id: fan10_12
label: Fan 10-12 Speed
type: string
query_command: "fan10_12"
- id: fan13_15
label: Fan 13-15 Speed
type: string
query_command: "fan13_15"
- id: fan16_18
label: Fan 16-18 Speed
type: string
query_command: "fan16_18"
description: "xxxx / NA / NA"
- id: fans
label: All Fans & Environment
type: string
query_command: "fans"
- id: water_pump
label: Water Pump
type: number
query_command: "water.pump"
- id: lamp1_hours
label: Lamp 1 Hours
type: integer
description: "UNRESOLVED: device is laser; lamp1.hours not in refined source"
- id: lamp2_hours
label: Lamp 2 Hours
type: integer
description: "UNRESOLVED: device is laser; lamp2.hours not in refined source"
- id: total_hours
label: Total Hours
type: integer
query_command: "total.hours"
- id: total_minutes
label: Total Minutes
type: number
query_command: "total.minutes"
- id: laser_minutes
label: Laser Minutes
type: number
query_command: "laser.minutes"
- id: laser_normal_hr
label: Laser Normal Hours
type: number
query_command: "laser.normal.hr"
- id: laser_normal_min
label: Laser Normal Minutes
type: number
query_command: "laser.normal.min"
- id: laser_eco_hr
label: Laser Eco Hours
type: number
query_command: "laser.eco.hr"
- id: laser_eco_min
label: Laser Eco Minutes
type: number
query_command: "laser.eco.min"
- id: status
label: Projector Status
type: enum
query_command: "status"
values: [standby, warm_up, imaging, cooling, error]
- id: errcode
label: Error Code
type: string
query_command: "errcode"
- id: cust_wp_ck_sum
label: Custom Warp Checksum
type: integer
query_command: "cust.wp.ck.sum"
description: "unsigned 32-bit checksum of bytes in current sent warp file (when cust.wp.send != 0)"
- id: lens_save_map
label: Lens Memory Occupancy
type: string
query_command: "lens.save"
description: "string of 0s and 1s indicating empty/occupied memory slots"
- id: psoc4_ver
label: PSOC4 Version
type: string
query_command: "psoc4.ver"
- id: warp_key
label: Warp Key License
type: enum
query_command: "warp.key"
values: ["licence_fail_timeout_expired", "licence_pass_timeout_expired", "licence_fail_timeout_active", "licence_pass_timeout_active"]
- id: power_state
label: Power State
type: enum
query_command: "power"
values: [off, on]
- id: input_state
label: Current Input
type: enum
query_command: "input"
values: [displayport, hdmi_1, hdmi_2, hdbaset, sdi3g, hdmi_3, hdmi_4]
- id: brightness_var
label: Brightness
type: integer
query_command: "brightness"
- id: contrast_var
label: Contrast
type: integer
query_command: "contrast"
- id: saturation_var
label: Saturation
type: integer
query_command: "saturation"
- id: hue_var
label: Hue
type: integer
query_command: "hue"
- id: sharpness_var
label: Sharpness
type: integer
query_command: "sharpness"
- id: aspect_ratio_state
label: Aspect Ratio State
type: string
query_command: "aspect.ratio"
- id: zoom_state
label: Zoom Level
type: string
query_command: "digi.zoom"
Variables
# UNRESOLVED: parametrable non-discrete params; populate or remove as needed
Events
# UNRESOLVED: unsolicited event behavior is not specified in source
Macros
# UNRESOLVED: no explicit macro sequences documented
Safety
confirmation_required_for:
- mfg_reset
- pri_reset
- factory_reset
- laser_reset
- user_p7_rst
- user_std_reset
- user_target_reset
- user2_target_reset
- gainlift_reset
- hsg_reset
- pin_barrel_reset
- four_corner_reset
- arc_reset
- blanking_reset
- warp_reset
- keystone_reset
- rotation_reset
- eb_reset
- digi_zoom_rst
interlocks:
- Lens commands only work when projector is switched on
- 'If lens.lock=1, most lens commands disabled (exceptions: lens.type, lens.save, lens.clear)'
- laser.power only settable when laser.mode=2 (Custom)
# UNRESOLVED: power-on sequencing, cooling requirements, high-voltage warnings not detailed in source
Notes
Only one control path (serial or network) at a time. Wait for complete response before next command. Spaces required before operator and value in ASCII commands. All wire commands end with ASCII carriage return (code 13). For nr_reset, concatenate command and the substituted payload before adding carriage return; the source documents Set and Get, not execute-only behavior. For the Set operation under lan_mac, concatenate set_command and the substituted set_payload before adding carriage return; its existing polling query remains unchanged. The source specifies only a string for the MAC value, so its exact encoding and validation constraints remain UNRESOLVED.
The standby_power entry retains the source's listed values, but its wire command is UNRESOLVED because the source marks no supported operators. Do not infer an operator or a default. Authentication, serial parity, stop bits and flow control remain UNRESOLVED. The source's schedule day notation is ambiguous: it prints 76543210 while mapping only bits 6 through 0; no exact wire encoding is established here.
Lens memory occupancy bitmap is returned by lens.save with the Get operator. user.target / user2.target protocol values are multiples of 1000 (not raw xy chromaticity). ac.voltage is range indicator, not raw reading. The source additionally lists eb.blu.bottom with Set/Get/Inc/Dec support and range 0-32; its relationship to the existing eb.blu.btm command is UNRESOLVED.
The added eb_blu_bottom.command and Feedback query_command values retain the literal command tokens printed in the source tables. For eb_blu_bottom, prepend *, append its substituted payload, then append ASCII carriage return (code 13). For each Feedback query, prepend * to query_command, append a space and ?, then append ASCII carriage return (code 13). The zoom_state query reads digital zoom through digi.zoom; the source documents no query for optical lens zoom.
Provenance
source_domains:
- digitalprojection.co.uk
source_urls:
- https://digitalprojection.co.uk/dpdownloads/Protocol/Simplified-Protocol-Guide-Rev-H.pdf
retrieved_at: 2026-04-29T09:13:33.598Z
last_checked_at: 2026-10-07T13:29:18.501Z
Verification Summary
verdict: verified
checked_at: 2026-10-07T13:29:18.501Z
matched_actions: 299
action_count: 299
confidence: medium
summary: "All 299 action units match source command tokens with correct ranges and enums; transport values (port 7000, 9600 baud, 8 data bits) in source. (11 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "serial parity/stop bits/flow control and authentication not stated in source"
- "source prints 76543210 and maps Bit6=Sat through Bit0=Sun; exact wire encoding and Bit7 meaning are not specified\"}]"
- "source lists standby.power values but leaves every operator column empty; no Set, Get or Execute wire form is established.\""
- "exact MAC address encoding and validation constraints are not specified in source\""
- "device is laser; lamp1.hours not in refined source\""
- "device is laser; lamp2.hours not in refined source\""
- "parametrable non-discrete params; populate or remove as needed"
- "unsolicited event behavior is not specified in source"
- "no explicit macro sequences documented"
- "power-on sequencing, cooling requirements, high-voltage warnings not detailed in source"
- "lamp1.hours and lamp2.hours are not in the source for E-Vision Laser 10K; their existing feedback ids are retained without inventing polling commands. Unsupported vga_auto and pic_mute actions were removed under the explicit id-preservation exception."
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0