AI4AVSummary
Cisco Webex Room Kit Series (RoomOS CE93) video conferencing codecs and collaboration bars. This spec covers the xAPI control interface accessible via SSH (TCP), HTTP/HTTPS, WebSocket, and RS-232 serial. The API exposes four major groups: Commands (xCommand), Configurations (xConfiguration), Status (xStatus), and Events (xEvent). Commands are case-insensitive, structured hierarchically, and support terminal, XML, and JSON output modes.
Transport
protocols:
- tcp
- http
- serial
addressing:
# UNRESOLVED: SSH port not explicitly stated in source
port: null
serial:
baud_rate: 115200
data_bits: 8
parity: none
stop_bits: 1
flow_control: none # UNRESOLVED: source says "Hardware flow control: Off" for most devices
auth:
type: basic
description: >-
HTTP requires Basic Access Authentication with ADMIN role. SSH and serial
require login by default (xConfiguration SerialPort LoginRequired: On).
HTTP supports session-based auth via POST /xmlapi/session/begin with
SessionId cookie. Default user is 'admin' with initially no passphrase.
Traits
traits:
- powerable # SystemUnit Boot, Standby Activate/Deactivate
- queryable # xStatus, xConfiguration queries
- routable # Video Matrix Assign/Swap, Video Input SetMainVideoSource
- levelable # Audio Volume Set/Increase/Decrease, gain controls
- dialable # Dial, Call Accept/Reject/Disconnect
Actions
# 418 distinct xCommand entries documented in the source (excludes the
# introductory "xCommand commands" section header).
#
# Each entry below corresponds to one named xCommand path as listed in the
# source. Parameter ranges inside a single command do NOT multiply into
# separate actions.
# --- AirPlay ---
- id: airplay_keyevent_back
label: AirPlay Key Event Back
kind: action
command: xCommand AirPlay KeyEvent Back
params: []
- id: airplay_keyevent_click
label: AirPlay Key Event Click
kind: action
command: xCommand AirPlay KeyEvent Click
params: []
- id: airplay_keyevent_down
label: AirPlay Key Event Down
kind: action
command: xCommand AirPlay KeyEvent Down
params: []
- id: airplay_keyevent_fastforward
label: AirPlay Key Event FastForward
kind: action
command: xCommand AirPlay KeyEvent FastForward
params: []
- id: airplay_keyevent_fastreverse
label: AirPlay Key Event FastReverse
kind: action
command: xCommand AirPlay KeyEvent FastReverse
params: []
- id: airplay_keyevent_left
label: AirPlay Key Event Left
kind: action
command: xCommand AirPlay KeyEvent Left
params: []
- id: airplay_keyevent_play
label: AirPlay Key Event Play
kind: action
command: xCommand AirPlay KeyEvent Play
params: []
- id: airplay_keyevent_right
label: AirPlay Key Event Right
kind: action
command: xCommand AirPlay KeyEvent Right
params: []
- id: airplay_keyevent_up
label: AirPlay Key Event Up
kind: action
command: xCommand AirPlay KeyEvent Up
params: []
- id: airplay_resetpaireddevices
label: AirPlay Reset Paired Devices
kind: action
command: xCommand AirPlay ResetPairedDevices
params: []
# --- Audio Diagnostics ---
- id: audio_diagnostics_advanced_run
label: Audio Diagnostics Advanced Run
kind: action
command: xCommand Audio Diagnostics Advanced Run
params: []
- id: audio_diagnostics_aecreverb_reset
label: Audio Diagnostics AecReverb Reset
kind: action
command: xCommand Audio Diagnostics AecReverb Reset
params: []
- id: audio_diagnostics_aecreverb_run
label: Audio Diagnostics AecReverb Run
kind: action
command: xCommand Audio Diagnostics AecReverb Run
params: []
- id: audio_diagnostics_measuredelay
label: Audio Diagnostics MeasureDelay
kind: action
command: xCommand Audio Diagnostics MeasureDelay
params: []
# --- Audio Equalizer ---
- id: audio_equalizer_list
label: Audio Equalizer List
kind: query
command: xCommand Audio Equalizer List
params: []
- id: audio_equalizer_update
label: Audio Equalizer Update
kind: action
command: xCommand Audio Equalizer Update
params: []
# --- Audio LocalInput ---
- id: audio_localinput_add
label: Audio LocalInput Add
kind: action
command: xCommand Audio LocalInput Add
params: []
- id: audio_localinput_addconnector
label: Audio LocalInput AddConnector
kind: action
command: xCommand Audio LocalInput AddConnector
params: []
- id: audio_localinput_remove
label: Audio LocalInput Remove
kind: action
command: xCommand Audio LocalInput Remove
params: []
- id: audio_localinput_removeconnector
label: Audio LocalInput RemoveConnector
kind: action
command: xCommand Audio LocalInput RemoveConnector
params: []
- id: audio_localinput_update
label: Audio LocalInput Update
kind: action
command: xCommand Audio LocalInput Update
params: []
- id: audio_localinput_ethernet_deregister
label: Audio LocalInput Ethernet Deregister
kind: action
command: xCommand Audio LocalInput Ethernet Deregister
params: []
- id: audio_localinput_ethernet_register
label: Audio LocalInput Ethernet Register
kind: action
command: xCommand Audio LocalInput Ethernet Register
params: []
# --- Audio LocalOutput ---
- id: audio_localoutput_add
label: Audio LocalOutput Add
kind: action
command: xCommand Audio LocalOutput Add
params: []
- id: audio_localoutput_addconnector
label: Audio LocalOutput AddConnector
kind: action
command: xCommand Audio LocalOutput AddConnector
params: []
- id: audio_localoutput_connectinput
label: Audio LocalOutput ConnectInput
kind: action
command: xCommand Audio LocalOutput ConnectInput
params: []
- id: audio_localoutput_disconnectinput
label: Audio LocalOutput DisconnectInput
kind: action
command: xCommand Audio LocalOutput DisconnectInput
params: []
- id: audio_localoutput_remove
label: Audio LocalOutput Remove
kind: action
command: xCommand Audio LocalOutput Remove
params: []
- id: audio_localoutput_removeconnector
label: Audio LocalOutput RemoveConnector
kind: action
command: xCommand Audio LocalOutput RemoveConnector
params: []
- id: audio_localoutput_update
label: Audio LocalOutput Update
kind: action
command: xCommand Audio LocalOutput Update
params: []
- id: audio_localoutput_updateinputgain
label: Audio LocalOutput UpdateInputGain
kind: action
command: xCommand Audio LocalOutput UpdateInputGain
params: []
# --- Audio Microphones ---
- id: audio_microphones_musicmode_start
label: Audio Microphones MusicMode Start
kind: action
command: xCommand Audio Microphones MusicMode Start
params: []
- id: audio_microphones_musicmode_stop
label: Audio Microphones MusicMode Stop
kind: action
command: xCommand Audio Microphones MusicMode Stop
params: []
- id: audio_microphones_noiseremoval_activate
label: Audio Microphones NoiseRemoval Activate
kind: action
command: xCommand Audio Microphones NoiseRemoval Activate
params: []
- id: audio_microphones_noiseremoval_deactivate
label: Audio Microphones NoiseRemoval Deactivate
kind: action
command: xCommand Audio Microphones NoiseRemoval Deactivate
params: []
- id: audio_microphones_passthrough_start
label: Audio Microphones Passthrough Start
kind: action
command: xCommand Audio Microphones Passthrough Start
params: []
- id: audio_microphones_passthrough_stop
label: Audio Microphones Passthrough Stop
kind: action
command: xCommand Audio Microphones Passthrough Stop
params: []
- id: audio_microphones_mute
label: Audio Microphones Mute
kind: action
command: xCommand Audio Microphones Mute
params: []
- id: audio_microphones_togglemute
label: Audio Microphones ToggleMute
kind: action
command: xCommand Audio Microphones ToggleMute
params: []
- id: audio_microphones_unmute
label: Audio Microphones Unmute
kind: action
command: xCommand Audio Microphones Unmute
params: []
# --- Audio RemoteOutput ---
- id: audio_remoteoutput_connectinput
label: Audio RemoteOutput ConnectInput
kind: action
command: xCommand Audio RemoteOutput ConnectInput
params: []
- id: audio_remoteoutput_disconnectinput
label: Audio RemoteOutput DisconnectInput
kind: action
command: xCommand Audio RemoteOutput DisconnectInput
params: []
- id: audio_remoteoutput_updateinputgain
label: Audio RemoteOutput UpdateInputGain
kind: action
command: xCommand Audio RemoteOutput UpdateInputGain
params: []
# --- Audio General ---
- id: audio_select
label: Audio Select
kind: action
command: xCommand Audio Select
params: []
- id: audio_sound_play
label: Audio Sound Play
kind: action
command: xCommand Audio Sound Play
params: []
- id: audio_sound_stop
label: Audio Sound Stop
kind: action
command: xCommand Audio Sound Stop
params: []
- id: audio_setup_clear
label: Audio Setup Clear
kind: action
command: xCommand Audio Setup Clear
params: []
- id: audio_setup_reset
label: Audio Setup Reset
kind: action
command: xCommand Audio Setup Reset
params: []
- id: audio_speakercheck
label: Audio SpeakerCheck
kind: action
command: xCommand Audio SpeakerCheck
params: []
# --- Audio SoundsAndAlerts ---
- id: audio_soundsandalerts_ringtone_play
label: Audio SoundsAndAlerts Ringtone Play
kind: action
command: xCommand Audio SoundsAndAlerts Ringtone Play
params: []
- id: audio_soundsandalerts_ringtone_list
label: Audio SoundsAndAlerts Ringtone List
kind: query
command: xCommand Audio SoundsAndAlerts Ringtone List
params: []
- id: audio_soundsandalerts_ringtone_stop
label: Audio SoundsAndAlerts Ringtone Stop
kind: action
command: xCommand Audio SoundsAndAlerts Ringtone Stop
params: []
# --- Audio Volume ---
- id: audio_volume_decrease
label: Audio Volume Decrease
kind: action
command: xCommand Audio Volume Decrease
params:
- name: Step
type: integer
description: Volume step to decrease (default 1)
- id: audio_volume_increase
label: Audio Volume Increase
kind: action
command: xCommand Audio Volume Increase
params:
- name: Step
type: integer
description: Volume step to increase (default 1)
- id: audio_volume_mute
label: Audio Volume Mute
kind: action
command: xCommand Audio Volume Mute
params: []
- id: audio_volume_set
label: Audio Volume Set
kind: action
command: xCommand Audio Volume Set
params:
- name: Level
type: integer
description: "Volume level (0..100, where 0 = off, range -34.5dB to 15dB)"
- id: audio_volume_settodefault
label: Audio Volume SetToDefault
kind: action
command: xCommand Audio Volume SetToDefault
params: []
- id: audio_volume_togglemute
label: Audio Volume ToggleMute
kind: action
command: xCommand Audio Volume ToggleMute
params: []
- id: audio_volume_unmute
label: Audio Volume Unmute
kind: action
command: xCommand Audio Volume Unmute
params: []
# --- Audio VuMeter ---
- id: audio_vumeter_start
label: Audio VuMeter Start
kind: action
command: xCommand Audio VuMeter Start
params: []
- id: audio_vumeter_stop
label: Audio VuMeter Stop
kind: action
command: xCommand Audio VuMeter Stop
params: []
- id: audio_vumeter_stopall
label: Audio VuMeter StopAll
kind: action
command: xCommand Audio VuMeter StopAll
params: []
# --- Bluetooth ---
- id: bluetooth_streaming_next
label: Bluetooth Streaming Next
kind: action
command: xCommand Bluetooth Streaming Next
params: []
- id: bluetooth_streaming_pause
label: Bluetooth Streaming Pause
kind: action
command: xCommand Bluetooth Streaming Pause
params: []
- id: bluetooth_streaming_play
label: Bluetooth Streaming Play
kind: action
command: xCommand Bluetooth Streaming Play
params: []
- id: bluetooth_streaming_previous
label: Bluetooth Streaming Previous
kind: action
command: xCommand Bluetooth Streaming Previous
params: []
# --- Bookings ---
- id: bookings_book
label: Bookings Book
kind: action
command: xCommand Bookings Book
params: []
- id: bookings_clear
label: Bookings Clear
kind: action
command: xCommand Bookings Clear
params: []
- id: bookings_delete
label: Bookings Delete
kind: action
command: xCommand Bookings Delete
params: []
- id: bookings_edit
label: Bookings Edit
kind: action
command: xCommand Bookings Edit
params: []
- id: bookings_extend
label: Bookings Extend
kind: action
command: xCommand Bookings Extend
params: []
- id: bookings_list
label: Bookings List
kind: query
command: xCommand Bookings List
params: []
- id: bookings_get
label: Bookings Get
kind: query
command: xCommand Bookings Get
params: []
- id: bookings_notificationsnooze
label: Bookings NotificationSnooze
kind: action
command: xCommand Bookings NotificationSnooze
params: []
- id: bookings_put
label: Bookings Put
kind: action
command: xCommand Bookings Put
params: []
- id: bookings_respond
label: Bookings Respond
kind: action
command: xCommand Bookings Respond
params: []
# --- Call ---
- id: call_accept
label: Call Accept
kind: action
command: xCommand Call Accept
params: []
- id: call_disconnect
label: Call Disconnect
kind: action
command: xCommand Call Disconnect
params: []
- id: call_dtmfsend
label: Call DTMFSend
kind: action
command: xCommand Call DTMFSend
params:
- name: DTMFString
type: string
description: DTMF tones to send
- id: call_farendcontrol_camera_move
label: Call FarEndControl Camera Move
kind: action
command: xCommand Call FarEndControl Camera Move
params:
- name: Pan
type: integer
- name: Tilt
type: integer
- name: Zoom
type: integer
- name: CameraId
type: integer
- id: call_farendcontrol_camera_stop
label: Call FarEndControl Camera Stop
kind: action
command: xCommand Call FarEndControl Camera Stop
params: []
- id: call_farendcontrol_requestcapabilities
label: Call FarEndControl RequestCapabilities
kind: action
command: xCommand Call FarEndControl RequestCapabilities
params: []
- id: call_farendcontrol_roompreset_activate
label: Call FarEndControl RoomPreset Activate
kind: action
command: xCommand Call FarEndControl RoomPreset Activate
params:
- name: PresetId
type: integer
- id: call_farendcontrol_roompreset_store
label: Call FarEndControl RoomPreset Store
kind: action
command: xCommand Call FarEndControl RoomPreset Store
params: []
- id: call_farendcontrol_source_select
label: Call FarEndControl Source Select
kind: action
command: xCommand Call FarEndControl Source Select
params: []
- id: call_farendmessage_send
label: Call FarEndMessage Send
kind: action
command: xCommand Call FarEndMessage Send
params:
- name: Message
type: string
- id: call_forward
label: Call Forward
kind: action
command: xCommand Call Forward
params: []
- id: call_hold
label: Call Hold
kind: action
command: xCommand Call Hold
params: []
- id: call_join
label: Call Join
kind: action
command: xCommand Call Join
params: []
- id: call_reject
label: Call Reject
kind: action
command: xCommand Call Reject
params: []
- id: call_ignore
label: Call Ignore
kind: action
command: xCommand Call Ignore
params: []
- id: call_resume
label: Call Resume
kind: action
command: xCommand Call Resume
params: []
- id: call_unattendedtransfer
label: Call UnattendedTransfer
kind: action
command: xCommand Call UnattendedTransfer
params: []
# --- CallHistory ---
- id: callhistory_acknowledgeallmissedcalls
label: CallHistory AcknowledgeAllMissedCalls
kind: action
command: xCommand CallHistory AcknowledgeAllMissedCalls
params: []
- id: callhistory_acknowledgemissedcall
label: CallHistory AcknowledgeMissedCall
kind: action
command: xCommand CallHistory AcknowledgeMissedCall
params: []
- id: callhistory_deleteall
label: CallHistory DeleteAll
kind: action
command: xCommand CallHistory DeleteAll
params: []
- id: callhistory_get
label: CallHistory Get
kind: query
command: xCommand CallHistory Get
params: []
- id: callhistory_deleteentry
label: CallHistory DeleteEntry
kind: action
command: xCommand CallHistory DeleteEntry
params: []
- id: callhistory_recents
label: CallHistory Recents
kind: query
command: xCommand CallHistory Recents
params: []
# --- Camera ---
- id: camera_positionreset
label: Camera PositionReset
kind: action
command: xCommand Camera PositionReset
params:
- name: CameraId
type: integer
- id: camera_positionset
label: Camera PositionSet
kind: action
command: xCommand Camera PositionSet
params:
- name: CameraId
type: integer
- name: Pan
type: integer
- name: Tilt
type: integer
- name: Zoom
type: integer
- name: Focus
type: integer
- id: camera_preset_activate
label: Camera Preset Activate
kind: action
command: xCommand Camera Preset Activate
params:
- name: PresetId
type: integer
- id: camera_preset_activatedefaultposition
label: Camera Preset ActivateDefaultPosition
kind: action
command: xCommand Camera Preset ActivateDefaultPosition
params: []
- id: camera_preset_edit
label: Camera Preset Edit
kind: action
command: xCommand Camera Preset Edit
params: []
- id: camera_preset_list
label: Camera Preset List
kind: query
command: xCommand Camera Preset List
params: []
- id: camera_preset_remove
label: Camera Preset Remove
kind: action
command: xCommand Camera Preset Remove
params: []
- id: camera_preset_show
label: Camera Preset Show
kind: action
command: xCommand Camera Preset Show
params: []
- id: camera_preset_store
label: Camera Preset Store
kind: action
command: xCommand Camera Preset Store
params:
- name: PresetId
type: integer
- name: Description
type: string
- id: camera_ramp
label: Camera Ramp
kind: action
command: xCommand Camera Ramp
params:
- name: CameraId
type: integer
- name: PanSpeed
type: integer
- name: TiltSpeed
type: integer
- name: ZoomSpeed
type: integer
- id: camera_triggerautofocus
label: Camera TriggerAutofocus
kind: action
command: xCommand Camera TriggerAutofocus
params: []
- id: camera_triggerwhitebalance
label: Camera TriggerWhitebalance
kind: action
command: xCommand Camera TriggerWhitebalance
params: []
# --- Cameras Background ---
- id: cameras_background_delete
label: Cameras Background Delete
kind: action
command: xCommand Cameras Background Delete
params: []
- id: cameras_autofocus_diagnostics_start
label: Cameras AutoFocus Diagnostics Start
kind: action
command: xCommand Cameras AutoFocus Diagnostics Start
params: []
- id: cameras_background_fetch
label: Cameras Background Fetch
kind: action
command: xCommand Cameras Background Fetch
params: []
- id: cameras_autofocus_diagnostics_stop
label: Cameras AutoFocus Diagnostics Stop
kind: action
command: xCommand Cameras AutoFocus Diagnostics Stop
params: []
- id: cameras_background_clear
label: Cameras Background Clear
kind: action
command: xCommand Cameras Background Clear
params: []
- id: cameras_background_foregroundparameters_reset
label: Cameras Background ForegroundParameters Reset
kind: action
command: xCommand Cameras Background ForegroundParameters Reset
params: []
- id: cameras_background_foregroundparameters_set
label: Cameras Background ForegroundParameters Set
kind: action
command: xCommand Cameras Background ForegroundParameters Set
params: []
- id: cameras_background_get
label: Cameras Background Get
kind: query
command: xCommand Cameras Background Get
params: []
- id: cameras_background_list
label: Cameras Background List
kind: query
command: xCommand Cameras Background List
params: []
- id: cameras_background_set
label: Cameras Background Set
kind: action
command: xCommand Cameras Background Set
params: []
- id: cameras_background_upload
label: Cameras Background Upload
kind: action
command: xCommand Cameras Background Upload
params: []
# --- Cameras PresenterTrack ---
- id: cameras_presentertrack_clearposition
label: Cameras PresenterTrack ClearPosition
kind: action
command: xCommand Cameras PresenterTrack ClearPosition
params: []
- id: cameras_presentertrack_set
label: Cameras PresenterTrack Set
kind: action
command: xCommand Cameras PresenterTrack Set
params: []
- id: cameras_presentertrack_storeposition
label: Cameras PresenterTrack StorePosition
kind: action
command: xCommand Cameras PresenterTrack StorePosition
params: []
# --- Cameras SpeakerTrack ---
- id: cameras_speakertrack_backgroundmode_deactivate
label: Cameras SpeakerTrack BackgroundMode Deactivate
kind: action
command: xCommand Cameras SpeakerTrack BackgroundMode Deactivate
params: []
- id: cameras_speakertrack_diagnostics_start
label: Cameras SpeakerTrack Diagnostics Start
kind: action
command: xCommand Cameras SpeakerTrack Diagnostics Start
params: []
- id: cameras_speakertrack_activate
label: Cameras SpeakerTrack Activate
kind: action
command: xCommand Cameras SpeakerTrack Activate
params: []
- id: cameras_speakertrack_deactivate
label: Cameras SpeakerTrack Deactivate
kind: action
command: xCommand Cameras SpeakerTrack Deactivate
params: []
- id: cameras_speakertrack_backgroundmode_activate
label: Cameras SpeakerTrack BackgroundMode Activate
kind: action
command: xCommand Cameras SpeakerTrack BackgroundMode Activate
params: []
- id: cameras_speakertrack_diagnostics_stop
label: Cameras SpeakerTrack Diagnostics Stop
kind: action
command: xCommand Cameras SpeakerTrack Diagnostics Stop
params: []
- id: cameras_speakertrack_frames_activate
label: Cameras SpeakerTrack Frames Activate
kind: action
command: xCommand Cameras SpeakerTrack Frames Activate
params: []
- id: cameras_speakertrack_viewlimits_deactivate
label: Cameras SpeakerTrack ViewLimits Deactivate
kind: action
command: xCommand Cameras SpeakerTrack ViewLimits Deactivate
params: []
- id: cameras_speakertrack_frames_deactivate
label: Cameras SpeakerTrack Frames Deactivate
kind: action
command: xCommand Cameras SpeakerTrack Frames Deactivate
params: []
- id: cameras_speakertrack_viewlimits_storeposition
label: Cameras SpeakerTrack ViewLimits StorePosition
kind: action
command: xCommand Cameras SpeakerTrack ViewLimits StorePosition
params: []
- id: cameras_speakertrack_viewlimits_activate
label: Cameras SpeakerTrack ViewLimits Activate
kind: action
command: xCommand Cameras SpeakerTrack ViewLimits Activate
params: []
- id: cameras_speakertrack_whiteboard_activateposition
label: Cameras SpeakerTrack Whiteboard ActivatePosition
kind: action
command: xCommand Cameras SpeakerTrack Whiteboard ActivatePosition
params: []
- id: cameras_speakertrack_whiteboard_alignposition
label: Cameras SpeakerTrack Whiteboard AlignPosition
kind: action
command: xCommand Cameras SpeakerTrack Whiteboard AlignPosition
params: []
- id: cameras_speakertrack_whiteboard_setdistance
label: Cameras SpeakerTrack Whiteboard SetDistance
kind: action
command: xCommand Cameras SpeakerTrack Whiteboard SetDistance
params: []
- id: cameras_speakertrack_whiteboard_storeposition
label: Cameras SpeakerTrack Whiteboard StorePosition
kind: action
command: xCommand Cameras SpeakerTrack Whiteboard StorePosition
params: []
# --- Conference ---
- id: conference_admitall
label: Conference AdmitAll
kind: action
command: xCommand Conference AdmitAll
params: []
- id: conference_call_authenticationresponse
label: Conference Call AuthenticationResponse
kind: action
command: xCommand Conference Call AuthenticationResponse
params: []
- id: conference_donotdisturb_activate
label: Conference DoNotDisturb Activate
kind: action
command: xCommand Conference DoNotDisturb Activate
params: []
- id: conference_donotdisturb_deactivate
label: Conference DoNotDisturb Deactivate
kind: action
command: xCommand Conference DoNotDisturb Deactivate
params: []
- id: conference_endmeeting
label: Conference EndMeeting
kind: action
command: xCommand Conference EndMeeting
params: []
- id: conference_hand_raise
label: Conference Hand Raise
kind: action
command: xCommand Conference Hand Raise
params: []
- id: conference_hardmute
label: Conference HardMute
kind: action
command: xCommand Conference HardMute
params: []
- id: conference_hand_lower
label: Conference Hand Lower
kind: action
command: xCommand Conference Hand Lower
params: []
- id: conference_lock
label: Conference Lock
kind: action
command: xCommand Conference Lock
params: []
- id: conference_meetingassistant_start
label: Conference MeetingAssistant Start
kind: action
command: xCommand Conference MeetingAssistant Start
params: []
- id: conference_meetingassistant_stop
label: Conference MeetingAssistant Stop
kind: action
command: xCommand Conference MeetingAssistant Stop
params: []
- id: conference_lowerallhands
label: Conference LowerAllHands
kind: action
command: xCommand Conference LowerAllHands
params: []
- id: conference_meetingchatnotifications_default
label: Conference MeetingChatNotifications Default
kind: action
command: xCommand Conference MeetingChatNotifications Default
params: []
- id: conference_meetingchatnotifications_incall
label: Conference MeetingChatNotifications InCall
kind: action
command: xCommand Conference MeetingChatNotifications InCall
params: []
- id: conference_muteall
label: Conference MuteAll
kind: action
command: xCommand Conference MuteAll
params: []
- id: conference_muteonentry
label: Conference MuteOnEntry
kind: action
command: xCommand Conference MuteOnEntry
params: []
- id: conference_participant_add
label: Conference Participant Add
kind: action
command: xCommand Conference Participant Add
params: []
- id: conference_participant_admit
label: Conference Participant Admit
kind: action
command: xCommand Conference Participant Admit
params: []
- id: conference_participant_disconnect
label: Conference Participant Disconnect
kind: action
command: xCommand Conference Participant Disconnect
params: []
- id: conference_participant_lowerhand
label: Conference Participant LowerHand
kind: action
command: xCommand Conference Participant LowerHand
params: []
- id: conference_participant_mute
label: Conference Participant Mute
kind: action
command: xCommand Conference Participant Mute
params: []
- id: conference_participantlist_search
label: Conference ParticipantList Search
kind: query
command: xCommand Conference ParticipantList Search
params: []
- id: conference_peoplefocus_activate
label: Conference PeopleFocus Activate
kind: action
command: xCommand Conference PeopleFocus Activate
params: []
- id: conference_reaction_enable
label: Conference Reaction Enable
kind: action
command: xCommand Conference Reaction Enable
params: []
- id: conference_peoplefocus_deactivate
label: Conference PeopleFocus Deactivate
kind: action
command: xCommand Conference PeopleFocus Deactivate
params: []
- id: conference_reaction_disable
label: Conference Reaction Disable
kind: action
command: xCommand Conference Reaction Disable
params: []
- id: conference_reaction_send
label: Conference Reaction Send
kind: action
command: xCommand Conference Reaction Send
params: []
- id: conference_recording_pause
label: Conference Recording Pause
kind: action
command: xCommand Conference Recording Pause
params: []
- id: conference_recording_resume
label: Conference Recording Resume
kind: action
command: xCommand Conference Recording Resume
params: []
- id: conference_recording_start
label: Conference Recording Start
kind: action
command: xCommand Conference Recording Start
params: []
- id: conference_recording_stop
label: Conference Recording Stop
kind: action
command: xCommand Conference Recording Stop
params: []
- id: conference_skintone
label: Conference SkinTone
kind: action
command: xCommand Conference SkinTone
params: []
- id: conference_speakerlock_set
label: Conference SpeakerLock Set
kind: action
command: xCommand Conference SpeakerLock Set
params: []
- id: conference_speakerlock_release
label: Conference SpeakerLock Release
kind: action
command: xCommand Conference SpeakerLock Release
params: []
- id: conference_transferhostandleave
label: Conference TransferHostAndLeave
kind: action
command: xCommand Conference TransferHostAndLeave
params: []
# --- Diagnostics ---
- id: diagnostics_run
label: Diagnostics Run
kind: action
command: xCommand Diagnostics Run
params: []
# --- Dial ---
- id: dial
label: Dial
kind: action
command: xCommand Dial
params:
- name: Number
type: string
description: Number or URI to dial
- name: Protocol
type: string
description: "Protocol (H323, SIP, etc.)"
# --- GPIO ---
- id: gpio_manualstate_set
label: GPIO ManualState Set
kind: action
command: xCommand GPIO ManualState Set
params: []
# --- HttpClient ---
- id: httpclient_allow_hostname_add
label: HttpClient Allow Hostname Add
kind: action
command: xCommand HttpClient Allow Hostname Add
params: []
- id: httpclient_allow_hostname_remove
label: HttpClient Allow Hostname Remove
kind: action
command: xCommand HttpClient Allow Hostname Remove
params: []
- id: httpclient_allow_hostname_clear
label: HttpClient Allow Hostname Clear
kind: action
command: xCommand HttpClient Allow Hostname Clear
params: []
- id: httpclient_allow_hostname_list
label: HttpClient Allow Hostname List
kind: query
command: xCommand HttpClient Allow Hostname List
params: []
- id: httpclient_delete
label: HttpClient Delete
kind: action
command: xCommand HttpClient Delete
params: []
- id: httpclient_get
label: HttpClient Get
kind: action
command: xCommand HttpClient Get
params: []
- id: httpclient_patch
label: HttpClient Patch
kind: action
command: xCommand HttpClient Patch
params: []
- id: httpclient_post
label: HttpClient Post
kind: action
command: xCommand HttpClient Post
params: []
- id: httpclient_put
label: HttpClient Put
kind: action
command: xCommand HttpClient Put
params: []
# --- HttpFeedback ---
- id: httpfeedback_deregister
label: HttpFeedback Deregister
kind: action
command: xCommand HttpFeedback Deregister
params: []
- id: httpfeedback_enable
label: HttpFeedback Enable
kind: action
command: xCommand HttpFeedback Enable
params: []
- id: httpfeedback_register
label: HttpFeedback Register
kind: action
command: xCommand HttpFeedback Register
params:
- name: FeedbackSlot
type: integer
description: "Slot number (1..4)"
- name: ServerUrl
type: string
description: URL for HTTP feedback
- name: Format
type: string
description: "XML or JSON"
# --- Logging ---
- id: logging_addevent
label: Logging AddEvent
kind: action
command: xCommand Logging AddEvent
params: []
- id: logging_extendedlogging_start
label: Logging ExtendedLogging Start
kind: action
command: xCommand Logging ExtendedLogging Start
params: []
- id: logging_extendedlogging_stop
label: Logging ExtendedLogging Stop
kind: action
command: xCommand Logging ExtendedLogging Stop
params: []
- id: logging_sendlogs
label: Logging SendLogs
kind: action
command: xCommand Logging SendLogs
params: []
# --- Macros ---
- id: macros_log_clear
label: Macros Log Clear
kind: action
command: xCommand Macros Log Clear
params: []
- id: macros_log_get
label: Macros Log Get
kind: query
command: xCommand Macros Log Get
params: []
- id: macros_macro_activate
label: Macros Macro Activate
kind: action
command: xCommand Macros Macro Activate
params:
- name: Id
type: integer
- id: macros_macro_deactivate
label: Macros Macro Deactivate
kind: action
command: xCommand Macros Macro Deactivate
params:
- name: Id
type: integer
- id: macros_macro_get
label: Macros Macro Get
kind: query
command: xCommand Macros Macro Get
params: []
- id: macros_macro_remove
label: Macros Macro Remove
kind: action
command: xCommand Macros Macro Remove
params: []
- id: macros_macro_removeall
label: Macros Macro RemoveAll
kind: action
command: xCommand Macros Macro RemoveAll
params: []
- id: macros_macro_rename
label: Macros Macro Rename
kind: action
command: xCommand Macros Macro Rename
params: []
- id: macros_macro_save
label: Macros Macro Save
kind: action
command: xCommand Macros Macro Save
params: []
- id: macros_macro_roles_set
label: Macros Macro Roles Set
kind: action
command: xCommand Macros Macro Roles Set
params: []
- id: macros_runtime_restart
label: Macros Runtime Restart
kind: action
command: xCommand Macros Runtime Restart
params: []
- id: macros_runtime_start
label: Macros Runtime Start
kind: action
command: xCommand Macros Runtime Start
params: []
- id: macros_runtime_status
label: Macros Runtime Status
kind: query
command: xCommand Macros Runtime Status
params: []
- id: macros_runtime_stop
label: Macros Runtime Stop
kind: action
command: xCommand Macros Runtime Stop
params: []
# --- Message ---
- id: message_send
label: Message Send
kind: action
command: xCommand Message Send
params: []
# --- Network ---
- id: network_snmp_usm_user_add
label: Network SNMP USM User Add
kind: action
command: xCommand Network SNMP USM User Add
params: []
- id: network_smtp_verifyconfig
label: Network SMTP VerifyConfig
kind: action
command: xCommand Network SMTP VerifyConfig
params: []
- id: network_snmp_usm_user_delete
label: Network SNMP USM User Delete
kind: action
command: xCommand Network SNMP USM User Delete
params: []
- id: network_snmp_usm_user_list
label: Network SNMP USM User List
kind: query
command: xCommand Network SNMP USM User List
params: []
- id: network_wifi_configure
label: Network Wifi Configure
kind: action
command: xCommand Network Wifi Configure
params: []
- id: network_wifi_scan_start
label: Network Wifi Scan Start
kind: action
command: xCommand Network Wifi Scan Start
params: []
- id: network_wifi_delete
label: Network Wifi Delete
kind: action
command: xCommand Network Wifi Delete
params: []
- id: network_wifi_scan_stop
label: Network Wifi Scan Stop
kind: action
command: xCommand Network Wifi Scan Stop
params: []
- id: network_wifi_list
label: Network Wifi List
kind: query
command: xCommand Network Wifi List
params: []
# --- Peripherals ---
- id: peripherals_connect
label: Peripherals Connect
kind: action
command: xCommand Peripherals Connect
params: []
- id: peripherals_heartbeat
label: Peripherals HeartBeat
kind: action
command: xCommand Peripherals HeartBeat
params: []
- id: peripherals_list
label: Peripherals List
kind: query
command: xCommand Peripherals List
params: []
- id: peripherals_pairing_pinpairing_start
label: Peripherals Pairing PinPairing Start
kind: action
command: xCommand Peripherals Pairing PinPairing Start
params: []
- id: peripherals_pairing_pair
label: Peripherals Pairing Pair
kind: action
command: xCommand Peripherals Pairing Pair
params: []
- id: peripherals_pairing_pinpairing_stop
label: Peripherals Pairing PinPairing Stop
kind: action
command: xCommand Peripherals Pairing PinPairing Stop
params: []
- id: peripherals_pairing_unpair
label: Peripherals Pairing Unpair
kind: action
command: xCommand Peripherals Pairing Unpair
params: []
- id: peripherals_purge
label: Peripherals Purge
kind: action
command: xCommand Peripherals Purge
params: []
- id: peripherals_touchpanel_configure
label: Peripherals TouchPanel Configure
kind: action
command: xCommand Peripherals TouchPanel Configure
params: []
# --- Phonebook ---
- id: phonebook_contact_add
label: Phonebook Contact Add
kind: action
command: xCommand Phonebook Contact Add
params: []
- id: phonebook_contact_delete
label: Phonebook Contact Delete
kind: action
command: xCommand Phonebook Contact Delete
params: []
- id: phonebook_contact_modify
label: Phonebook Contact Modify
kind: action
command: xCommand Phonebook Contact Modify
params: []
- id: phonebook_contactmethod_add
label: Phonebook ContactMethod Add
kind: action
command: xCommand Phonebook ContactMethod Add
params: []
- id: phonebook_contactmethod_delete
label: Phonebook ContactMethod Delete
kind: action
command: xCommand Phonebook ContactMethod Delete
params: []
- id: phonebook_contactmethod_modify
label: Phonebook ContactMethod Modify
kind: action
command: xCommand Phonebook ContactMethod Modify
params: []
- id: phonebook_folder_add
label: Phonebook Folder Add
kind: action
command: xCommand Phonebook Folder Add
params: []
- id: phonebook_folder_delete
label: Phonebook Folder Delete
kind: action
command: xCommand Phonebook Folder Delete
params: []
- id: phonebook_folder_modify
label: Phonebook Folder Modify
kind: action
command: xCommand Phonebook Folder Modify
params: []
- id: phonebook_search
label: Phonebook Search
kind: query
command: xCommand Phonebook Search
params:
- name: SearchString
type: string
# --- Presentation ---
- id: presentation_start
label: Presentation Start
kind: action
command: xCommand Presentation Start
params:
- name: SendingMode
type: string
- id: presentation_stop
label: Presentation Stop
kind: action
command: xCommand Presentation Stop
params: []
# --- Provisioning ---
- id: provisioning_completeupgrade
label: Provisioning CompleteUpgrade
kind: action
command: xCommand Provisioning CompleteUpgrade
params: []
- id: provisioning_postponeupgrade
label: Provisioning PostponeUpgrade
kind: action
command: xCommand Provisioning PostponeUpgrade
params: []
- id: provisioning_cucm_extensionmobility_login
label: Provisioning CUCM ExtensionMobility Login
kind: action
command: xCommand Provisioning CUCM ExtensionMobility Login
params: []
- id: provisioning_roomtype_activate
label: Provisioning RoomType Activate
kind: action
command: xCommand Provisioning RoomType Activate
params: []
- id: provisioning_cucm_extensionmobility_logout
label: Provisioning CUCM ExtensionMobility Logout
kind: action
command: xCommand Provisioning CUCM ExtensionMobility Logout
params: []
- id: provisioning_service_fetch
label: Provisioning Service Fetch
kind: action
command: xCommand Provisioning Service Fetch
params: []
# --- Proximity ---
- id: proximity_services_activate
label: Proximity Services Activate
kind: action
command: xCommand Proximity Services Activate
params: []
- id: proximity_services_deactivate
label: Proximity Services Deactivate
kind: action
command: xCommand Proximity Services Deactivate
params: []
# --- RoomCleanup ---
- id: roomcleanup_cancel
label: RoomCleanup Cancel
kind: action
command: xCommand RoomCleanup Cancel
params: []
- id: roomcleanup_run
label: RoomCleanup Run
kind: action
command: xCommand RoomCleanup Run
params: []
# --- RoomPreset ---
- id: roompreset_store
label: RoomPreset Store
kind: action
command: xCommand RoomPreset Store
params: []
- id: roompreset_activate
label: RoomPreset Activate
kind: action
command: xCommand RoomPreset Activate
params: []
- id: roompreset_clear
label: RoomPreset Clear
kind: action
command: xCommand RoomPreset Clear
params: []
# --- Security ---
- id: security_certificates_ca_add
label: Security Certificates CA Add
kind: action
command: xCommand Security Certificates CA Add
params: []
- id: security_certificates_cucm_ctl_delete
label: Security Certificates CUCM CTL Delete
kind: action
command: xCommand Security Certificates CUCM CTL Delete
params: []
- id: security_certificates_cucm_ctl_show
label: Security Certificates CUCM CTL Show
kind: query
command: xCommand Security Certificates CUCM CTL Show
params: []
- id: security_certificates_ca_delete
label: Security Certificates CA Delete
kind: action
command: xCommand Security Certificates CA Delete
params: []
- id: security_certificates_ca_show
label: Security Certificates CA Show
kind: query
command: xCommand Security Certificates CA Show
params: []
- id: security_certificates_cucm_itl_show
label: Security Certificates CUCM ITL Show
kind: query
command: xCommand Security Certificates CUCM ITL Show
params: []
- id: security_certificates_cucm_mic_show
label: Security Certificates CUCM MIC Show
kind: query
command: xCommand Security Certificates CUCM MIC Show
params: []
- id: security_certificates_services_activate
label: Security Certificates Services Activate
kind: action
command: xCommand Security Certificates Services Activate
params: []
- id: security_certificates_services_add
label: Security Certificates Services Add
kind: action
command: xCommand Security Certificates Services Add
params: []
- id: security_certificates_services_deactivate
label: Security Certificates Services Deactivate
kind: action
command: xCommand Security Certificates Services Deactivate
params: []
- id: security_certificates_services_delete
label: Security Certificates Services Delete
kind: action
command: xCommand Security Certificates Services Delete
params: []
- id: security_certificates_services_show
label: Security Certificates Services Show
kind: query
command: xCommand Security Certificates Services Show
params: []
- id: security_certificates_thirdparty_disable
label: Security Certificates ThirdParty Disable
kind: action
command: xCommand Security Certificates ThirdParty Disable
params: []
- id: security_certificates_thirdparty_show
label: Security Certificates ThirdParty Show
kind: query
command: xCommand Security Certificates ThirdParty Show
params: []
- id: security_certificates_thirdparty_enable
label: Security Certificates ThirdParty Enable
kind: action
command: xCommand Security Certificates ThirdParty Enable
params: []
- id: security_certificates_thirdparty_list
label: Security Certificates ThirdParty List
kind: query
command: xCommand Security Certificates ThirdParty List
params: []
- id: security_certificates_webex_show
label: Security Certificates Webex Show
kind: query
command: xCommand Security Certificates Webex Show
params: []
- id: security_certificates_webexidentity_show
label: Security Certificates WebexIdentity Show
kind: query
command: xCommand Security Certificates WebexIdentity Show
params: []
- id: security_ciphers_list
label: Security Ciphers List
kind: query
command: xCommand Security Ciphers List
params: []
- id: security_clientsecret_populate
label: Security ClientSecret Populate
kind: action
command: xCommand Security ClientSecret Populate
params: []
- id: security_persistency
label: Security Persistency
kind: action
command: xCommand Security Persistency
params: []
- id: security_session_get
label: Security Session Get
kind: query
command: xCommand Security Session Get
params: []
- id: security_session_list
label: Security Session List
kind: query
command: xCommand Security Session List
params: []
- id: security_session_terminate
label: Security Session Terminate
kind: action
command: xCommand Security Session Terminate
params: []
# --- Standby ---
- id: standby_activate
label: Standby Activate
kind: action
command: xCommand Standby Activate
params: []
- id: standby_deactivate
label: Standby Deactivate
kind: action
command: xCommand Standby Deactivate
params: []
- id: standby_halfwake
label: Standby Halfwake
kind: action
command: xCommand Standby Halfwake
params: []
- id: standby_resethalfwaketimer
label: Standby ResetHalfwakeTimer
kind: action
command: xCommand Standby ResetHalfwakeTimer
params: []
- id: standby_resettimer
label: Standby ResetTimer
kind: action
command: xCommand Standby ResetTimer
params: []
# --- SystemUnit ---
- id: systemunit_boot
label: SystemUnit Boot
kind: action
command: xCommand SystemUnit Boot
params: []
- id: systemunit_developerpreview_activate
label: SystemUnit DeveloperPreview Activate
kind: action
command: xCommand SystemUnit DeveloperPreview Activate
params: []
- id: systemunit_developerpreview_deactivate
label: SystemUnit DeveloperPreview Deactivate
kind: action
command: xCommand SystemUnit DeveloperPreview Deactivate
params: []
- id: systemunit_factoryreset
label: SystemUnit FactoryReset
kind: action
command: xCommand SystemUnit FactoryReset
params: []
- id: systemunit_firsttimewizard_stop
label: SystemUnit FirstTimeWizard Stop
kind: action
command: xCommand SystemUnit FirstTimeWizard Stop
params: []
- id: systemunit_notifications_removeall
label: SystemUnit Notifications RemoveAll
kind: action
command: xCommand SystemUnit Notifications RemoveAll
params: []
- id: systemunit_optionkey_add
label: SystemUnit OptionKey Add
kind: action
command: xCommand SystemUnit OptionKey Add
params: []
- id: systemunit_optionkey_removeall
label: SystemUnit OptionKey RemoveAll
kind: action
command: xCommand SystemUnit OptionKey RemoveAll
params: []
- id: systemunit_productplatform_set
label: SystemUnit ProductPlatform Set
kind: action
command: xCommand SystemUnit ProductPlatform Set
params: []
- id: systemunit_optionkey_list
label: SystemUnit OptionKey List
kind: query
command: xCommand SystemUnit OptionKey List
params: []
- id: systemunit_optionkey_remove
label: SystemUnit OptionKey Remove
kind: action
command: xCommand SystemUnit OptionKey Remove
params: []
- id: systemunit_signinbanner_clear
label: SystemUnit SignInBanner Clear
kind: action
command: xCommand SystemUnit SignInBanner Clear
params: []
- id: systemunit_softreset
label: SystemUnit SoftReset
kind: action
command: xCommand SystemUnit SoftReset
params: []
- id: systemunit_signinbanner_get
label: SystemUnit SignInBanner Get
kind: query
command: xCommand SystemUnit SignInBanner Get
params: []
- id: systemunit_signinbanner_set
label: SystemUnit SignInBanner Set
kind: action
command: xCommand SystemUnit SignInBanner Set
params: []
- id: systemunit_softwareupgrade
label: SystemUnit SoftwareUpgrade
kind: action
command: xCommand SystemUnit SoftwareUpgrade
params: []
- id: systemunit_welcomebanner_clear
label: SystemUnit WelcomeBanner Clear
kind: action
command: xCommand SystemUnit WelcomeBanner Clear
params: []
- id: systemunit_welcomebanner_get
label: SystemUnit WelcomeBanner Get
kind: query
command: xCommand SystemUnit WelcomeBanner Get
params: []
- id: systemunit_welcomebanner_set
label: SystemUnit WelcomeBanner Set
kind: action
command: xCommand SystemUnit WelcomeBanner Set
params: []
# --- Time ---
- id: time_datetime_get
label: Time DateTime Get
kind: query
command: xCommand Time DateTime Get
params: []
- id: time_datetime_set
label: Time DateTime Set
kind: action
command: xCommand Time DateTime Set
params: []
# --- UserInterface Branding ---
- id: userinterface_branding_fetch
label: UserInterface Branding Fetch
kind: action
command: xCommand UserInterface Branding Fetch
params: []
- id: userinterface_branding_clear
label: UserInterface Branding Clear
kind: action
command: xCommand UserInterface Branding Clear
params: []
- id: userinterface_branding_delete
label: UserInterface Branding Delete
kind: action
command: xCommand UserInterface Branding Delete
params: []
- id: userinterface_branding_get
label: UserInterface Branding Get
kind: query
command: xCommand UserInterface Branding Get
params: []
- id: userinterface_branding_updated
label: UserInterface Branding Updated
kind: action
command: xCommand UserInterface Branding Updated
params: []
- id: userinterface_branding_upload
label: UserInterface Branding Upload
kind: action
command: xCommand UserInterface Branding Upload
params: []
# --- UserInterface Extensions ---
- id: userinterface_extensions_clear
label: UserInterface Extensions Clear
kind: action
command: xCommand UserInterface Extensions Clear
params: []
- id: userinterface_extensions_export
label: UserInterface Extensions Export
kind: action
command: xCommand UserInterface Extensions Export
params: []
- id: userinterface_extensions_icon_delete
label: UserInterface Extensions Icon Delete
kind: action
command: xCommand UserInterface Extensions Icon Delete
params: []
- id: userinterface_extensions_icon_download
label: UserInterface Extensions Icon Download
kind: action
command: xCommand UserInterface Extensions Icon Download
params: []
- id: userinterface_extensions_icon_deleteall
label: UserInterface Extensions Icon DeleteAll
kind: action
command: xCommand UserInterface Extensions Icon DeleteAll
params: []
- id: userinterface_extensions_icon_fetch
label: UserInterface Extensions Icon Fetch
kind: action
command: xCommand UserInterface Extensions Icon Fetch
params: []
- id: userinterface_extensions_icon_get
label: UserInterface Extensions Icon Get
kind: query
command: xCommand UserInterface Extensions Icon Get
params: []
- id: userinterface_extensions_icon_list
label: UserInterface Extensions Icon List
kind: query
command: xCommand UserInterface Extensions Icon List
params: []
- id: userinterface_extensions_list
label: UserInterface Extensions List
kind: query
command: xCommand UserInterface Extensions List
params: []
- id: userinterface_extensions_icon_upload
label: UserInterface Extensions Icon Upload
kind: action
command: xCommand UserInterface Extensions Icon Upload
params: []
- id: userinterface_extensions_panel_clicked
label: UserInterface Extensions Panel Clicked
kind: action
command: xCommand UserInterface Extensions Panel Clicked
params: []
- id: userinterface_extensions_panel_close
label: UserInterface Extensions Panel Close
kind: action
command: xCommand UserInterface Extensions Panel Close
params: []
- id: userinterface_extensions_panel_save
label: UserInterface Extensions Panel Save
kind: action
command: xCommand UserInterface Extensions Panel Save
params: []
- id: userinterface_extensions_panel_open
label: UserInterface Extensions Panel Open
kind: action
command: xCommand UserInterface Extensions Panel Open
params: []
- id: userinterface_extensions_panel_remove
label: UserInterface Extensions Panel Remove
kind: action
command: xCommand UserInterface Extensions Panel Remove
params: []
- id: userinterface_extensions_panel_update
label: UserInterface Extensions Panel Update
kind: action
command: xCommand UserInterface Extensions Panel Update
params: []
- id: userinterface_extensions_set
label: UserInterface Extensions Set
kind: action
command: xCommand UserInterface Extensions Set
params: []
- id: userinterface_extensions_webapp_save
label: UserInterface Extensions WebApp Save
kind: action
command: xCommand UserInterface Extensions WebApp Save
params: []
- id: userinterface_extensions_webwidget_remove
label: UserInterface Extensions WebWidget Remove
kind: action
command: xCommand UserInterface Extensions WebWidget Remove
params: []
- id: userinterface_extensions_webwidget_save
label: UserInterface Extensions WebWidget Save
kind: action
command: xCommand UserInterface Extensions WebWidget Save
params: []
- id: userinterface_extensions_widget_action
label: UserInterface Extensions Widget Action
kind: action
command: xCommand UserInterface Extensions Widget Action
params: []
- id: userinterface_extensions_widget_unsetvalue
label: UserInterface Extensions Widget UnsetValue
kind: action
command: xCommand UserInterface Extensions Widget UnsetValue
params: []
- id: userinterface_extensions_widget_setvalue
label: UserInterface Extensions Widget SetValue
kind: action
command: xCommand UserInterface Extensions Widget SetValue
params: []
# --- UserInterface LedControl ---
- id: userinterface_ledcontrol_color_set
label: UserInterface LedControl Color Set
kind: action
command: xCommand UserInterface LedControl Color Set
params: []
# --- UserInterface Message ---
- id: userinterface_message_alert_clear
label: UserInterface Message Alert Clear
kind: action
command: xCommand UserInterface Message Alert Clear
params: []
- id: userinterface_message_alert_display
label: UserInterface Message Alert Display
kind: action
command: xCommand UserInterface Message Alert Display
params:
- name: Title
type: string
- name: Text
type: string
- name: Duration
type: integer
- id: userinterface_message_prompt_clear
label: UserInterface Message Prompt Clear
kind: action
command: xCommand UserInterface Message Prompt Clear
params: []
- id: userinterface_message_prompt_display
label: UserInterface Message Prompt Display
kind: action
command: xCommand UserInterface Message Prompt Display
params: []
- id: userinterface_message_prompt_response
label: UserInterface Message Prompt Response
kind: action
command: xCommand UserInterface Message Prompt Response
params: []
- id: userinterface_message_rating_clear
label: UserInterface Message Rating Clear
kind: action
command: xCommand UserInterface Message Rating Clear
params: []
- id: userinterface_message_rating_display
label: UserInterface Message Rating Display
kind: action
command: xCommand UserInterface Message Rating Display
params: []
- id: userinterface_message_textinput_display
label: UserInterface Message TextInput Display
kind: action
command: xCommand UserInterface Message TextInput Display
params: []
- id: userinterface_message_rating_response
label: UserInterface Message Rating Response
kind: action
command: xCommand UserInterface Message Rating Response
params: []
- id: userinterface_message_textinput_clear
label: UserInterface Message TextInput Clear
kind: action
command: xCommand UserInterface Message TextInput Clear
params: []
- id: userinterface_message_textline_clear
label: UserInterface Message TextLine Clear
kind: action
command: xCommand UserInterface Message TextLine Clear
params: []
- id: userinterface_message_textinput_response
label: UserInterface Message TextInput Response
kind: action
command: xCommand UserInterface Message TextInput Response
params: []
- id: userinterface_message_textline_display
label: UserInterface Message TextLine Display
kind: action
command: xCommand UserInterface Message TextLine Display
params: []
# --- UserInterface Presentation ---
- id: userinterface_presentation_autoshare_showalert
label: UserInterface Presentation AutoShare ShowAlert
kind: action
command: xCommand UserInterface Presentation AutoShare ShowAlert
params: []
- id: userinterface_presentation_externalsource_add
label: UserInterface Presentation ExternalSource Add
kind: action
command: xCommand UserInterface Presentation ExternalSource Add
params: []
- id: userinterface_presentation_externalsource_list
label: UserInterface Presentation ExternalSource List
kind: query
command: xCommand UserInterface Presentation ExternalSource List
params: []
- id: userinterface_presentation_externalsource_remove
label: UserInterface Presentation ExternalSource Remove
kind: action
command: xCommand UserInterface Presentation ExternalSource Remove
params: []
- id: userinterface_presentation_externalsource_removeall
label: UserInterface Presentation ExternalSource RemoveAll
kind: action
command: xCommand UserInterface Presentation ExternalSource RemoveAll
params: []
- id: userinterface_presentation_externalsource_select
label: UserInterface Presentation ExternalSource Select
kind: action
command: xCommand UserInterface Presentation ExternalSource Select
params: []
- id: userinterface_presentation_externalsource_state_set
label: UserInterface Presentation ExternalSource State Set
kind: action
command: xCommand UserInterface Presentation ExternalSource State Set
params: []
# --- UserInterface Translation ---
- id: userinterface_translation_override_clear
label: UserInterface Translation Override Clear
kind: action
command: xCommand UserInterface Translation Override Clear
params: []
- id: userinterface_translation_override_get
label: UserInterface Translation Override Get
kind: query
command: xCommand UserInterface Translation Override Get
params: []
- id: userinterface_translation_override_set
label: UserInterface Translation Override Set
kind: action
command: xCommand UserInterface Translation Override Set
params: []
# --- UserInterface Wallpaper/WebView ---
- id: userinterface_wallpaperbundle_clear
label: UserInterface WallpaperBundle Clear
kind: action
command: xCommand UserInterface WallpaperBundle Clear
params: []
- id: userinterface_wallpaperbundle_list
label: UserInterface WallpaperBundle List
kind: query
command: xCommand UserInterface WallpaperBundle List
params: []
- id: userinterface_wallpaperbundle_set
label: UserInterface WallpaperBundle Set
kind: action
command: xCommand UserInterface WallpaperBundle Set
params: []
- id: userinterface_webview_clear
label: UserInterface WebView Clear
kind: action
command: xCommand UserInterface WebView Clear
params: []
- id: userinterface_webview_display
label: UserInterface WebView Display
kind: action
command: xCommand UserInterface WebView Display
params:
- name: URL
type: string
# --- UserManagement ---
- id: usermanagement_remotesupportuser_create
label: UserManagement RemoteSupportUser Create
kind: action
command: xCommand UserManagement RemoteSupportUser Create
params: []
- id: usermanagement_remotesupportuser_getstate
label: UserManagement RemoteSupportUser GetState
kind: query
command: xCommand UserManagement RemoteSupportUser GetState
params: []
- id: usermanagement_remotesupportuser_delete
label: UserManagement RemoteSupportUser Delete
kind: action
command: xCommand UserManagement RemoteSupportUser Delete
params: []
- id: usermanagement_remotesupportuser_disablepermanently
label: UserManagement RemoteSupportUser DisablePermanently
kind: action
command: xCommand UserManagement RemoteSupportUser DisablePermanently
params: []
- id: usermanagement_user_add
label: UserManagement User Add
kind: action
command: xCommand UserManagement User Add
params: []
- id: usermanagement_user_delete
label: UserManagement User Delete
kind: action
command: xCommand UserManagement User Delete
params: []
- id: usermanagement_user_get
label: UserManagement User Get
kind: query
command: xCommand UserManagement User Get
params: []
- id: usermanagement_user_list
label: UserManagement User List
kind: query
command: xCommand UserManagement User List
params: []
- id: usermanagement_user_modify
label: UserManagement User Modify
kind: action
command: xCommand UserManagement User Modify
params: []
- id: usermanagement_user_passphrase_change
label: UserManagement User Passphrase Change
kind: action
command: xCommand UserManagement User Passphrase Change
params: []
- id: usermanagement_user_unblock
label: UserManagement User Unblock
kind: action
command: xCommand UserManagement User Unblock
params: []
- id: usermanagement_user_passphrase_set
label: UserManagement User Passphrase Set
kind: action
command: xCommand UserManagement User Passphrase Set
params: []
# --- UserPresence ---
- id: userpresence_customstatus_set
label: UserPresence CustomStatus Set
kind: action
command: xCommand UserPresence CustomStatus Set
params: []
- id: userpresence_customstatus_clear
label: UserPresence CustomStatus Clear
kind: action
command: xCommand UserPresence CustomStatus Clear
params: []
- id: userpresence_customstatus_getrecentslist
label: UserPresence CustomStatus GetRecentsList
kind: query
command: xCommand UserPresence CustomStatus GetRecentsList
params: []
# --- Video CEC ---
- id: video_cec_input_keyclick
label: Video CEC Input KeyClick
kind: action
command: xCommand Video CEC Input KeyClick
params: []
- id: video_activespeakerpip_set
label: Video ActiveSpeakerPIP Set
kind: action
command: xCommand Video ActiveSpeakerPIP Set
params: []
- id: video_cec_output_keyclick
label: Video CEC Output KeyClick
kind: action
command: xCommand Video CEC Output KeyClick
params: []
- id: video_cec_output_sendactivesourcerequest
label: Video CEC Output SendActiveSourceRequest
kind: action
command: xCommand Video CEC Output SendActiveSourceRequest
params: []
- id: video_cec_output_sendinactivesourcerequest
label: Video CEC Output SendInactiveSourceRequest
kind: action
command: xCommand Video CEC Output SendInactiveSourceRequest
params: []
# --- Video Graphics/Input ---
- id: video_graphics_clear
label: Video Graphics Clear
kind: action
command: xCommand Video Graphics Clear
params: []
- id: video_graphics_text_display
label: Video Graphics Text Display
kind: action
command: xCommand Video Graphics Text Display
params: []
- id: video_input_mainvideo_mute
label: Video Input MainVideo Mute
kind: action
command: xCommand Video Input MainVideo Mute
params: []
- id: video_input_mainvideo_unmute
label: Video Input MainVideo Unmute
kind: action
command: xCommand Video Input MainVideo Unmute
params: []
- id: video_input_setmainvideosource
label: Video Input SetMainVideoSource
kind: action
command: xCommand Video Input SetMainVideoSource
params:
- name: SourceId
type: integer
description: Video input connector ID
# --- Video Layout ---
- id: video_layout_layoutfamily_set
label: Video Layout LayoutFamily Set
kind: action
command: xCommand Video Layout LayoutFamily Set
params: []
- id: video_layout_hidenonvideo_activate
label: Video Layout HideNonVideo Activate
kind: action
command: xCommand Video Layout HideNonVideo Activate
params: []
- id: video_layout_hidenonvideo_deactivate
label: Video Layout HideNonVideo Deactivate
kind: action
command: xCommand Video Layout HideNonVideo Deactivate
params: []
- id: video_layout_setlayout
label: Video Layout SetLayout
kind: action
command: xCommand Video Layout SetLayout
params: []
# --- Video Matrix ---
- id: video_matrix_assign
label: Video Matrix Assign
kind: action
command: xCommand Video Matrix Assign
params: []
- id: video_matrix_reset
label: Video Matrix Reset
kind: action
command: xCommand Video Matrix Reset
params: []
- id: video_matrix_unassign
label: Video Matrix Unassign
kind: action
command: xCommand Video Matrix Unassign
params: []
- id: video_matrix_swap
label: Video Matrix Swap
kind: action
command: xCommand Video Matrix Swap
params: []
# --- Video Output ---
- id: video_output_hdmi_passthrough_start
label: Video Output HDMI Passthrough Start
kind: action
command: xCommand Video Output HDMI Passthrough Start
params: []
- id: video_output_hdmi_passthrough_stop
label: Video Output HDMI Passthrough Stop
kind: action
command: xCommand Video Output HDMI Passthrough Stop
params: []
- id: video_output_monitor_color_select
label: Video Output Monitor Color Select
kind: action
command: xCommand Video Output Monitor Color Select
params: []
- id: video_output_monitor_backlight_set
label: Video Output Monitor Backlight Set
kind: action
command: xCommand Video Output Monitor Backlight Set
params: []
- id: video_output_monitor_reset
label: Video Output Monitor Reset
kind: action
command: xCommand Video Output Monitor Reset
params: []
# --- Video PIP/Selfview ---
- id: video_presentationpip_set
label: Video PresentationPIP Set
kind: action
command: xCommand Video PresentationPIP Set
params: []
- id: video_selfview_set
label: Video Selfview Set
kind: action
command: xCommand Video Selfview Set
params: []
- id: video_presentationview_set
label: Video PresentationView Set
kind: action
command: xCommand Video PresentationView Set
params: []
# --- WebEngine ---
- id: webengine_deletestorage
label: WebEngine DeleteStorage
kind: action
command: xCommand WebEngine DeleteStorage
params: []
- id: webengine_logging_set
label: WebEngine Logging Set
kind: action
command: xCommand WebEngine Logging Set
params: []
- id: webengine_mediaaccess_add
label: WebEngine MediaAccess Add
kind: action
command: xCommand WebEngine MediaAccess Add
params: []
- id: webengine_mediaaccess_remove
label: WebEngine MediaAccess Remove
kind: action
command: xCommand WebEngine MediaAccess Remove
params: []
- id: webengine_mediaaccess_removeall
label: WebEngine MediaAccess RemoveAll
kind: action
command: xCommand WebEngine MediaAccess RemoveAll
params: []
- id: webengine_mediaaccess_list
label: WebEngine MediaAccess List
kind: query
command: xCommand WebEngine MediaAccess List
params: []
# --- Webex ---
- id: webex_join
label: Webex Join
kind: action
command: xCommand Webex Join
params: []
- id: webex_hotdesking_setsupport
label: Webex Hotdesking SetSupport
kind: action
command: xCommand Webex Hotdesking SetSupport
params: []
- id: webex_meetings_instantmeeting_start
label: Webex Meetings InstantMeeting Start
kind: action
command: xCommand Webex Meetings InstantMeeting Start
params: []
- id: webex_registration_logout
label: Webex Registration Logout
kind: action
command: xCommand Webex Registration Logout
params: []
- id: webex_registration_cancel
label: Webex Registration Cancel
kind: action
command: xCommand Webex Registration Cancel
params: []
- id: webex_registration_converttocloud
label: Webex Registration ConvertToCloud
kind: action
command: xCommand Webex Registration ConvertToCloud
params: []
- id: webex_registration_start
label: Webex Registration Start
kind: action
command: xCommand Webex Registration Start
params: []
# --- WebRTC ---
- id: webrtc_join
label: WebRTC Join
kind: action
command: xCommand WebRTC Join
params: []
- id: webrtc_provider_current_diagnostics_send
label: WebRTC Provider Current Diagnostics Send
kind: action
command: xCommand WebRTC Provider Current Diagnostics Send
params: []
- id: webrtc_provider_googlemeet_meetingnumber_validate
label: WebRTC Provider GoogleMeet MeetingNumber Validate
kind: action
command: xCommand WebRTC Provider GoogleMeet MeetingNumber Validate
params: []
# --- Zoom ---
- id: zoom_join
label: Zoom Join
kind: action
command: xCommand Zoom Join
params: []
Feedbacks
# Feedback is registered via xFeedback register <path> on the Status,
# Configuration, and Event XPath documents. Up to 50 expressions per session.
# HTTP feedback via xCommand HttpFeedback Register (up to 4 slots, 15 expressions each).
- id: power_state
type: enum
values: [on, standby, halfwake]
path: /Status/Standby
description: Device power/standby state
- id: call_state
type: enum
values: [idle, ringing, connected, connecting]
path: /Status/Call
description: Current call state
- id: audio_volume
type: integer
path: /Status/Audio/Volume
description: Current speaker volume level (0..100)
- id: audio_mute
type: enum
values: [muted, unmuted]
path: /Status/Audio/Microphones/Mute
description: Microphone mute state
- id: video_input_source
type: string
path: /Status/Video/Input/MainVideoSource
description: Current main video source
- id: presentation_state
type: enum
values: [active, inactive]
path: /Status/Video/Presentation
description: Current presentation state
- id: conference_participants
type: string
path: /Status/Conference/Participant
description: Conference participant list
# UNRESOLVED: full list of feedback paths not exhaustively enumerated;
# the source describes the mechanism (xFeedback register) and provides examples
# but does not list every possible feedback path
Variables
- id: audio_volume_level
label: Audio Volume Level
type: integer
min: 0
max: 100
unit: "dB (-34.5 to 15 in 0.5dB steps, 0 = off)"
set_command: xCommand Audio Volume Set Level
get_command: xStatus Audio Volume
- id: audio_default_volume
label: Audio Default Volume
type: integer
min: 0
max: 100
set_command: xConfiguration Audio DefaultVolume
get_command: xConfiguration Audio DefaultVolume
- id: camera_brightness
label: Camera Brightness Level
type: integer
min: 1
max: 31
set_command: xConfiguration Cameras Camera [n] Brightness DefaultLevel
get_command: xConfiguration Cameras Camera [n] Brightness DefaultLevel
# UNRESOLVED: many more configuration variables exist (serial baud rate,
# network settings, etc.) but exhaustive enumeration exceeds scope of
# control-focused spec
Events
- id: outgoing_call_indication
description: Emitted when an outgoing call is about to be dialled
prefix: "*e OutgoingCallIndication"
fields:
- name: CallId
type: integer
- id: call_disconnect
description: Emitted when a call is disconnected
prefix: "*e CallDisconnect"
fields:
- name: CallId
type: integer
- name: CauseValue
type: integer
- name: CauseString
type: string
- name: CauseType
type: string
- name: OrigCallDirection
type: string
- id: call_successful
description: Emitted when a call is connected successfully
prefix: "*e CallSuccessful"
fields:
- name: CallId
type: integer
- name: Protocol
type: string
- name: Direction
type: string
- name: CallRate
type: integer
- id: fecc_action
description: Far end FECC command received
prefix: "*e FeccActionInd"
fields:
- name: Id
type: integer
- name: Req
type: integer
- id: tstring_received
description: TString message received from far end
prefix: "*e TString"
fields:
- name: CallId
type: integer
- name: Message
type: string
- id: sstring_received
description: SString message received from far end
prefix: "*e SString"
fields:
- name: String
type: string
- name: Id
type: integer
# UNRESOLVED: source describes xEvent mechanism but does not exhaustively
# list all event types; full event catalogue requires xEvent * on device
Macros
# UNRESOLVED: source describes macro system (xCommand Macros Macro Save/Activate)
# but does not document specific macro sequences
Safety
confirmation_required_for: []
interlocks: []
# UNRESOLVED: source does not document safety interlocks or confirmation
# requirements. Commands like SystemUnit FactoryReset, SystemUnit Boot,
# and Video Matrix Reset may warrant confirmation in production use but
# no explicit safety procedures are stated in the source.
Notes
- All commands are case-insensitive (e.g., XCOMMAND, xcommand, and xCommand all work).
- Commands are prefixed with
xCommandfor actions,xConfigurationfor settings,xStatusfor queries, andxEventfor events. - HTTP API uses
Content-Type: text/xmlwith POST to/putxmlfor commands/configurations. GET to/getxml?location=<path>for status/configuration retrieval. - HTTP session auth via
POST /xmlapi/session/begin(Basic Auth) returnsSessionIdcookie. Sessions are limited; explicitly close withPOST /xmlapi/session/end. - Feedback is session-scoped on SSH/serial; must re-register after reconnection. Up to 50 expressions per session.
- HTTP feedback (webhooks) supports up to 4 slots with 15 XPath expressions each.
- WebSocket uses JSON-RPC encoding (see separate xAPI over WebSocket guide).
- Serial baud rate for most devices is 115200 (fixed); Codec Pro / Room 70 G2 / Room Panorama support configurable rates (9600..115200).
- API works asynchronously; use
resultIdtagging to match requests with responses. - Default output mode is terminal; switch with
xPreferences outputmode xmlorxPreferences outputmode json. - Values containing spaces must be quoted.
- Use complete command paths (not abbreviations) for production integrations.
- Multiline commands terminated with a period (
.) on a separate line.
Provenance
source_domains:
- cisco.com
source_urls:
- https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/roomos-115/api-reference-guide-roomos-115.pdf
retrieved_at: 2026-05-27T04:41:35.847Z
last_checked_at: 2026-05-27T06:51:41.563Z
Verification Summary
verdict: verified
checked_at: 2026-05-27T06:51:41.563Z
matched_actions: 418
action_count: 418
confidence: medium
summary: "All 418 spec xCommand actions match source verbatim; transport confirmed. (18 unresolved item(s) noted in Known Gaps.)"
Known Gaps
- "specific SSH port not stated in source (only SSH mentioned, no port number)"
- "HTTP port implied as 80/443 but not explicitly stated as default"
- "firmware version compatibility range not stated"
- "the source is a large multi-product reference manual; not all commands apply to every model"
- "SSH port not explicitly stated in source"
- "source says \"Hardware flow control: Off\" for most devices"
- "full list of feedback paths not exhaustively enumerated;"
- "many more configuration variables exist (serial baud rate,"
- "source describes xEvent mechanism but does not exhaustively"
- "source describes macro system (xCommand Macros Macro Save/Activate)"
- "source does not document safety interlocks or confirmation"
- "SSH port number not stated in source"
- "HTTP/HTTPS default ports not explicitly stated"
- "WebSocket connection URL/path not detailed (refers to separate guide)"
- "firmware version compatibility not stated"
- "xConfiguration commands (hundreds of settings) not enumerated as separate actions"
- "xStatus queries not enumerated as separate actions (covered by generic xStatus mechanism)"
- "complete event catalogue not listed in source (only examples provided)"
From the AI4AV catalog (https://ai4av.net) · ODbL-1.0