Canon SX80 MarkII RS-232 / IP control commands

Summary

The Canon SX80 MarkII (and SX800 series) is a projector controllable from a PC via RS-232C serial or LAN (TCP/IP) connection. This spec covers the full ASCII command-set for power, input, image, lens, and system control as documented in the Canon User Commands specification revision 1. Commands are variable-length ASCII strings terminated by CR, LF, CR+LF, or Null; responses are prefixed with i:, w:, e:, or g:.

Transport

protocols:
  - serial
  - tcp
serial:
  baud_rate: 19200
  data_bits: 8
  parity: none
  stop_bits: 2
  flow_control: none
addressing:
  port: null  # UNRESOLVED: TCP port number not stated in source
auth:
  type: none  # inferred: no auth procedure in source

Traits

- powerable       # inferred from POWER ON/OFF command
- queryable       # inferred from GET/? query commands returning state
- routable        # inferred from INPUT selection command
- levelable       # inferred from AVOL, BRI, CONT, SHARP, GAMMA, SAT commands

Actions

- id: six_axis_adjustment_set
  label: 6-Axis Adjustment ON/OFF
  kind: action
  command: "6AXADJ={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: six_axis_adjustment_get
  label: Get 6-Axis Adjustment State
  kind: query
  command: "GET 6AXADJ"
  params: []

- id: six_axis_r_set
  label: Set 6-Axis R Hue/Saturation
  kind: action
  command: "6AXR={hue},{saturation}"
  params:
    - name: hue
      type: integer
      description: R hue -20 to 20
    - name: saturation
      type: integer
      description: R saturation -20 to 20

- id: six_axis_r_get
  label: Get 6-Axis R Hue/Saturation
  kind: query
  command: "GET 6AXR"
  params: []

- id: six_axis_g_set
  label: Set 6-Axis G Hue/Saturation
  kind: action
  command: "6AXG={hue},{saturation}"
  params:
    - name: hue
      type: integer
      description: G hue -20 to 20
    - name: saturation
      type: integer
      description: G saturation -20 to 20

- id: six_axis_g_get
  label: Get 6-Axis G Hue/Saturation
  kind: query
  command: "GET 6AXG"
  params: []

- id: six_axis_b_set
  label: Set 6-Axis B Hue/Saturation
  kind: action
  command: "6AXB={hue},{saturation}"
  params:
    - name: hue
      type: integer
      description: B hue -20 to 20
    - name: saturation
      type: integer
      description: B saturation -20 to 20

- id: six_axis_b_get
  label: Get 6-Axis B Hue/Saturation
  kind: query
  command: "GET 6AXB"
  params: []

- id: six_axis_c_set
  label: Set 6-Axis C Hue/Saturation
  kind: action
  command: "6AXC={hue},{saturation}"
  params:
    - name: hue
      type: integer
      description: C hue -20 to 20
    - name: saturation
      type: integer
      description: C saturation -20 to 20

- id: six_axis_c_get
  label: Get 6-Axis C Hue/Saturation
  kind: query
  command: "GET 6AXC"
  params: []

- id: six_axis_m_set
  label: Set 6-Axis M Hue/Saturation
  kind: action
  command: "6AXM={hue},{saturation}"
  params:
    - name: hue
      type: integer
      description: M hue -20 to 20
    - name: saturation
      type: integer
      description: M saturation -20 to 20

- id: six_axis_m_get
  label: Get 6-Axis M Hue/Saturation
  kind: query
  command: "GET 6AXM"
  params: []

- id: six_axis_y_set
  label: Set 6-Axis Y Hue/Saturation
  kind: action
  command: "6AXY={hue},{saturation}"
  params:
    - name: hue
      type: integer
      description: Y hue -20 to 20
    - name: saturation
      type: integer
      description: Y saturation -20 to 20

- id: six_axis_y_get
  label: Get 6-Axis Y Hue/Saturation
  kind: query
  command: "GET 6AXY"
  params: []

- id: ascombo_af_set
  label: Set Auto Setup Combination AF
  kind: action
  command: "ASCOMBO_AF={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: ascombo_af_get
  label: Get Auto Setup Combination AF
  kind: query
  command: "GET ASCOMBO_AF"
  params: []

- id: ascombo_avk_set
  label: Set Auto Setup Combination AVK
  kind: action
  command: "ASCOMBO_AVK={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: ascombo_avk_get
  label: Get Auto Setup Combination AVK
  kind: query
  command: "GET ASCOMBO_AVK"
  params: []

- id: ascombo_ainp_set
  label: Set Auto Setup Combination AINP
  kind: action
  command: "ASCOMBO_AINP={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: ascombo_ainp_get
  label: Get Auto Setup Combination AINP
  kind: query
  command: "GET ASCOMBO_AINP"
  params: []

- id: ascombo_asc_set
  label: Set Auto Setup Combination ASC
  kind: action
  command: "ASCOMBO_ASC={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: ascombo_asc_get
  label: Get Auto Setup Combination ASC
  kind: query
  command: "GET ASCOMBO_ASC"
  params: []

- id: aspect_set
  label: Set Screen Aspect
  kind: action
  command: "ASPECT={value}"
  params:
    - name: value
      type: enum
      values: [AUTO, "4:3", "16:9", FULL, ZOOM, TRUE]

- id: aspect_get
  label: Get Screen Aspect
  kind: query
  command: "GET ASPECT"
  params: []

- id: autopc
  label: Auto PC
  kind: action
  command: "AUTOPC"
  params: []

- id: autosetexe_focus
  label: Auto Setup — Focus
  kind: action
  command: "AUTOSETEXE FOCUS"
  params: []

- id: autosetexe_vks
  label: Auto Setup — Vertical Keystone
  kind: action
  command: "AUTOSETEXE VKS"
  params: []

- id: autosetexe_scrn
  label: Auto Setup — Screen Color Correction
  kind: action
  command: "AUTOSETEXE SCRN"
  params: []

- id: autosetexe_input
  label: Auto Setup — Auto Signal Sensing
  kind: action
  command: "AUTOSETEXE INPUT"
  params: []

- id: avol_set
  label: Set Audio Volume
  kind: action
  command: "AVOL={level}"
  params:
    - name: level
      type: integer
      description: 0 to 20

- id: avol_get
  label: Get Audio Volume
  kind: query
  command: "GET AVOL"
  params: []

- id: blank_set
  label: Set Blank
  kind: action
  command: "BLANK={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: blank_get
  label: Get Blank State
  kind: query
  command: "GET BLANK"
  params: []

- id: blankcolor_set
  label: Set Blank Screen Color
  kind: action
  command: "BLANKCOLOR={value}"
  params:
    - name: value
      type: enum
      values: [BLACK, BLUE]

- id: blankcolor_get
  label: Get Blank Screen Color
  kind: query
  command: "GET BLANKCOLOR"
  params: []

- id: bri_set
  label: Set Brightness
  kind: action
  command: "BRI={value}"
  params:
    - name: value
      type: integer
      description: -20 to 20

- id: bri_get
  label: Get Brightness
  kind: query
  command: "GET BRI"
  params: []

- id: bvol_set
  label: Set Beep Sound
  kind: action
  command: "BVOL={value}"
  params:
    - name: value
      type: enum
      values: ["0", "1"]
      description: "0=mute, 1=output"

- id: bvol_get
  label: Get Beep Sound Setting
  kind: query
  command: "GET BVOL"
  params: []

- id: comver_get
  label: Get User Command Version
  kind: query
  command: "GET COMVER"
  params: []

- id: cont_set
  label: Set Contrast
  kind: action
  command: "CONT={value}"
  params:
    - name: value
      type: integer
      description: -20 to 20

- id: cont_get
  label: Get Contrast
  kind: query
  command: "GET CONT"
  params: []

- id: dgamma_set
  label: Set Dynamic Gamma
  kind: action
  command: "DGAMMA={value}"
  params:
    - name: value
      type: enum
      values: [OFF, WEAK, STRONG]

- id: dgamma_get
  label: Get Dynamic Gamma
  kind: query
  command: "GET DGAMMA"
  params: []

- id: dots_set
  label: Set Total Number of Dots
  kind: action
  command: "DOTS={value}"
  params:
    - name: value
      type: integer
      description: Number of dots (A-RGB1/A-RGB2 input only)

- id: dots_get
  label: Get Total Number of Dots
  kind: query
  command: "GET DOTS"
  params: []

- id: dpon_set
  label: Set Direct Power-On
  kind: action
  command: "DPON={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: dpon_get
  label: Get Direct Power-On Setting
  kind: query
  command: "GET DPON"
  params: []

- id: err_get
  label: Get Error Information
  kind: query
  command: "GET ERR"
  params: []

- id: fcontdrv_set
  label: Focus Lens Continuous Drive
  kind: action
  command: "FCONTDRV={value}"
  params:
    - name: value
      type: enum
      values: [STOP, FAR, NEAR]

- id: freeze_set
  label: Set Freeze
  kind: action
  command: "FREEZE={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: freeze_get
  label: Get Freeze State
  kind: query
  command: "GET FREEZE"
  params: []

- id: fstepdrv_set
  label: Focus Lens Step Drive
  kind: action
  command: "FSTEPDRV={value}"
  params:
    - name: value
      type: enum
      values: [FAR, NEAR]

- id: gamma_set
  label: Set Gamma Adjustment
  kind: action
  command: "GAMMA={value}"
  params:
    - name: value
      type: integer
      description: -10 to 10

- id: gamma_get
  label: Get Gamma Adjustment
  kind: query
  command: "GET GAMMA"
  params: []

- id: guide_set
  label: Set Guide Display
  kind: action
  command: "GUIDE={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: guide_get
  label: Get Guide Display Setting
  kind: query
  command: "GET GUIDE"
  params: []

- id: hpix_set
  label: Set Horizontal Resolution
  kind: action
  command: "HPIX={value}"
  params:
    - name: value
      type: integer
      description: Horizontal resolution (D-RGB/A-RGB1/A-RGB2 input only)

- id: hpix_get
  label: Get Horizontal Resolution
  kind: query
  command: "GET HPIX"
  params: []

- id: vpix_set
  label: Set Vertical Resolution
  kind: action
  command: "VPIX={value}"
  params:
    - name: value
      type: integer
      description: Vertical resolution (D-RGB/A-RGB1/A-RGB2 input only)

- id: vpix_get
  label: Get Vertical Resolution
  kind: query
  command: "GET VPIX"
  params: []

- id: hpos_set
  label: Set Horizontal Position
  kind: action
  command: "HPOS={value}"
  params:
    - name: value
      type: integer
      description: Horizontal position (A-RGB1/A-RGB2 input only)

- id: hpos_get
  label: Get Horizontal Position
  kind: query
  command: "GET HPOS"
  params: []

- id: vpos_set
  label: Set Vertical Position
  kind: action
  command: "VPOS={value}"
  params:
    - name: value
      type: integer
      description: Vertical position (A-RGB1/A-RGB2 input only)

- id: vpos_get
  label: Get Vertical Position
  kind: query
  command: "GET VPOS"
  params: []

- id: hue_set
  label: Set Hue
  kind: action
  command: "HUE={value}"
  params:
    - name: value
      type: integer
      description: -20 to 20 (COMP/VIDEO/S-VIDEO/HDMI input only)

- id: hue_get
  label: Get Hue
  kind: query
  command: "GET HUE"
  params: []

- id: image_set
  label: Set Image Mode
  kind: action
  command: "IMAGE={value}"
  params:
    - name: value
      type: enum
      values: [STANDARD, PRESENTATION, SRGB, MOVIE, PHOTO, DCM_SIM]

- id: image_get
  label: Get Image Mode
  kind: query
  command: "GET IMAGE"
  params: []

- id: imageflip_set
  label: Set Flip Display
  kind: action
  command: "IMAGEFLIP={value}"
  params:
    - name: value
      type: enum
      values: [NONE, CEILING, REAR, REAR_CEILING]

- id: imageflip_get
  label: Get Flip Display Setting
  kind: query
  command: "GET IMAGEFLIP"
  params: []

- id: input_set
  label: Set Input Selection
  kind: action
  command: "INPUT={value}"
  params:
    - name: value
      type: enum
      values: [D-RGB, A-RGB1, A-RGB2, COMP, VIDEO, S-VIDEO, HDMI, USB]

- id: input_get
  label: Get Input Selection
  kind: query
  command: "GET INPUT"
  params: []

- id: keylock_set
  label: Set Keylock
  kind: action
  command: "KEYLOCK={value}"
  params:
    - name: value
      type: enum
      values: [OFF, MAIN, RC]

- id: keylock_get
  label: Get Keylock Setting
  kind: query
  command: "GET KEYLOCK"
  params: []

- id: lamp_set
  label: Set Lamp Output
  kind: action
  command: "LAMP={value}"
  params:
    - name: value
      type: enum
      values: [NORMAL, SILENT]

- id: lamp_get
  label: Get Lamp Output Setting
  kind: query
  command: "GET LAMP"
  params: []

- id: lampcounter_get
  label: Get Lamp ON Time
  kind: query
  command: "GET LAMPCOUNTER"
  params: []

- id: lang_set
  label: Set Language
  kind: action
  command: "LANG={value}"
  params:
    - name: value
      type: enum
      values: [ENG, DUT, NOR, FRA, RUS, TUR, GER, CHS, POL, ITA, CHT, HUN, SPA, KOR, CZE, POR, JPN, ARA, SWE, FIN, DAN]

- id: lang_get
  label: Get Language
  kind: query
  command: "GET LANG"
  params: []

- id: ledilluminate_set
  label: Set LED Illumination
  kind: action
  command: "LEDILLUMINATE={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: ledilluminate_get
  label: Get LED Illumination Setting
  kind: query
  command: "GET LEDILLUMINATE"
  params: []

- id: lmpt_get
  label: Get Lamp Time
  kind: query
  command: "GET LMPT"
  params: []

- id: main_power
  label: Front Panel — POWER
  kind: action
  command: "MAIN POWER"
  params: []

- id: main_power_off
  label: Front Panel — POWER OFF (double press)
  kind: action
  command: "MAIN POWER_OFF"
  params: []

- id: main_menu
  label: Front Panel — MENU
  kind: action
  command: "MAIN MENU"
  params: []

- id: main_autoset
  label: Front Panel — AUTO SET
  kind: action
  command: "MAIN AUTOSET"
  params: []

- id: main_input
  label: Front Panel — INPUT
  kind: action
  command: "MAIN INPUT"
  params: []

- id: main_autopc
  label: Front Panel — AUTOPC
  kind: action
  command: "MAIN AUTOPC"
  params: []

- id: main_keystone
  label: Front Panel — KEYSTONE
  kind: action
  command: "MAIN KEYSTONE"
  params: []

- id: main_up
  label: Front Panel — UP
  kind: action
  command: "MAIN UP"
  params: []

- id: main_up_rep
  label: Front Panel — UP Button Press Start
  kind: action
  command: "MAIN UP+REP"
  params: []

- id: main_down
  label: Front Panel — DOWN
  kind: action
  command: "MAIN DOWN"
  params: []

- id: main_down_rep
  label: Front Panel — DOWN Button Press Start
  kind: action
  command: "MAIN DOWN+REP"
  params: []

- id: main_left
  label: Front Panel — LEFT
  kind: action
  command: "MAIN LEFT"
  params: []

- id: main_left_rep
  label: Front Panel — LEFT Button Press Start
  kind: action
  command: "MAIN LEFT+REP"
  params: []

- id: main_right
  label: Front Panel — RIGHT
  kind: action
  command: "MAIN RIGHT"
  params: []

- id: main_right_rep
  label: Front Panel — RIGHT Button Press Start
  kind: action
  command: "MAIN RIGHT+REP"
  params: []

- id: main_ok
  label: Front Panel — OK
  kind: action
  command: "MAIN OK"
  params: []

- id: main_focus
  label: Front Panel — FOCUS
  kind: action
  command: "MAIN FOCUS"
  params: []

- id: main_zoom
  label: Front Panel — ZOOM
  kind: action
  command: "MAIN ZOOM"
  params: []

- id: main_rep_end
  label: Front Panel — Button Press End
  kind: action
  command: "MAIN *-REP"
  params: []

- id: memcadj_set
  label: Set Memory Color Adjustment
  kind: action
  command: "MEMCADJ={value}"
  params:
    - name: value
      type: enum
      values: [OFF, MEM_L, MEM_M, MEM_H]

- id: memcadj_get
  label: Get Memory Color Adjustment
  kind: query
  command: "GET MEMCADJ"
  params: []

- id: mode_remote
  label: Set Control Mode REMOTE (compatibility)
  kind: action
  command: "REMOTE"
  params: []

- id: mode_local
  label: Set Control Mode LOCAL (compatibility)
  kind: action
  command: "LOCAL"
  params: []

- id: mode_get
  label: Get Control Mode
  kind: query
  command: "GET MODE"
  params: []

- id: mute_set
  label: Set Mute
  kind: action
  command: "MUTE={value}"
  params:
    - name: value
      type: enum
      values: [ON, OFF]

- id: mute_get
  label: Get Mute State
  kind: query
  command: "GET MUTE"
  params: []

- id: nosig_set
  label: Set No-Signal Screen
  kind: action
  command: "NOSIG={value}"
  params:
    - name: value
      type: enum
      values: [BLACK, BLUE]

- id: nosig_get
  label: Get No-Signal Screen Setting
  kind: query
  command: "GET NOSIG"
  params: []

- id: pjon_set
  label: Set Startup Display Screen
  kind: action
  command: "PJON={value}"
  params:
    - name: value
      type: enum
      values: [CANON, SKIP]

- id: pjon_get
  label: Get Startup Display Screen Setting
  kind: query
  command: "GET PJON"
  params: []

- id: pmm_set
  label: Set Power Management
  kind: action
  command: "PMM={value}"
  params:
    - name: value
      type: enum
      values: [OFF, STANDBY, EXIT]

- id: pmm_get
  label: Get Power Management Setting
  kind: query
  command: "GET PMM"
  params: []

- id: power_on
  label: Power ON
  kind: action
  command: "POWER ON"
  params: []

- id: power_off
  label: Power OFF
  kind: action
  command: "POWER OFF"
  params: []

- id: power_get
  label: Get Power State
  kind: query
  command: "GET POWER"
  params: []

- id: prodcode_get
  label: Get Product Code
  kind: query
  command: "GET PRODCODE"
  params: []

- id: prog_set
  label: Set Progressive Conversion
  kind: action
  command: "PROG={value}"
  params:
    - name: value
      type: enum
      values: ["0", "1", "2"]
      description: "0=OFF, 1=ON, 2=AUTO"

- id: prog_get
  label: Get Progressive Conversion Setting
  kind: query
  command: "GET PROG"
  params: []

- id: rc_power
  label: Remote Control — POWER
  kind: action
  command: "RC POWER"
  params: []

- id: rc_power_off
  label: Remote Control — POWER OFF (double press)
  kind: action
  command: "RC POWER_OFF"
  params: []

- id: rc_menu
  label: Remote Control — MENU
  kind: action
  command: "RC MENU"
  params: []

- id: rc_autoset
  label: Remote Control — AUTO SET
  kind: action
  command: "RC AUTOSET"
  params: []

- id: rc_input
  label: Remote Control — INPUT
  kind: action
  command: "RC INPUT"
  params: []

- id: rc_aspect
  label: Remote Control — ASPECT
  kind: action
  command: "RC ASPECT"
  params: []

- id: rc_autopc
  label: Remote Control — AUTOPC
  kind: action
  command: "RC AUTOPC"
  params: []

- id: rc_keystone
  label: Remote Control — KEYSTONE
  kind: action
  command: "RC KEYSTONE"
  params: []

- id: rc_up
  label: Remote Control — UP
  kind: action
  command: "RC UP"
  params: []

- id: rc_up_rep
  label: Remote Control — UP Button Press Start
  kind: action
  command: "RC UP+REP"
  params: []

- id: rc_down
  label: Remote Control — DOWN
  kind: action
  command: "RC DOWN"
  params: []

- id: rc_down_rep
  label: Remote Control — DOWN Button Press Start
  kind: action
  command: "RC DOWN+REP"
  params: []

- id: rc_left
  label: Remote Control — LEFT
  kind: action
  command: "RC LEFT"
  params: []

- id: rc_left_rep
  label: Remote Control — LEFT Button Press Start
  kind: action
  command: "RC LEFT+REP"
  params: []

- id: rc_right
  label: Remote Control — RIGHT
  kind: action
  command: "RC RIGHT"
  params: []

- id: rc_right_rep
  label: Remote Control — RIGHT Button Press Start
  kind: action
  command: "RC RIGHT+REP"
  params: []

- id: rc_ok
  label: Remote Control — OK
  kind: action
  command: "RC OK"
  params: []

- id: rc_image
  label: Remote Control — IMAGE
  kind: action
  command: "RC IMAGE"
  params: []

- id: rc_freeze
  label: Remote Control — FREEZE
  kind: action
  command: "RC FREEZE"
  params: []

- id: rc_vol_p
  label: Remote Control — VOL+
  kind: action
  command: "RC VOL_P"
  params: []

- id: rc_vol_p_rep
  label: Remote Control — VOL+ Button Press Start
  kind: action
  command: "RC VOL_P+REP"
  params: []

- id: rc_vol_m
  label: Remote Control — VOL-
  kind: action
  command: "RC VOL_M"
  params: []

- id: rc_vol_m_rep
  label: Remote Control — VOL- Button Press Start
  kind: action
  command: "RC VOL_M+REP"
  params: []

- id: rc_blank
  label: Remote Control — BLANK
  kind: action
  command: "RC BLANK"
  params: []

- id: rc_mute
  label: Remote Control — MUTE
  kind: action
  command: "RC MUTE"
  params: []

- id: rc_p_timer
  label: Remote Control — P-TIMER
  kind: action
  command: "RC P_TIMER"
  params: []

- id: rc_lamp
  label: Remote Control — LAMP
  kind: action
  command: "RC LAMP"
  params: []

- id: rc_dzoom_p
  label: Remote Control — DZOOM+
  kind: action
  command: "RC DZOOM_P"
  params: []

- id: rc_dzoom_p_rep
  label: Remote Control — DZOOM+ Button Press Start
  kind: action
  command: "RC DZOOM_P+REP"
  params: []

- id: rc_dzoom_m
  label: Remote Control — DZOOM-
  kind: action
  command: "RC DZOOM_M"
  params: []

- id: rc_dzoom_m_rep
  label: Remote Control — DZOOM- Button Press Start
  kind: action
  command: "RC DZOOM_M+REP"
  params: []

- id: rc_focus
  label: Remote Control — FOCUS
  kind: action
  command: "RC FOCUS"
  params: []

- id: rc_zoom
  label: Remote Control — ZOOM
  kind: action
  command: "RC ZOOM"
  params: []

- id: rc_rep_end
  label: Remote Control — Button Press End
  kind: action
  command: "RC *-REP"
  params: []

- id: rcch_set
  label: Set Remote Control Channel
  kind: action
  command: "RCCH={value}"
  params:
    - name: value
      type: enum
      values: ["1", "2"]

- id: rcch_get
  label: Get Remote Control Channel
  kind: query
  command: "GET RCCH"
  params: []

- id: reset_lamptime
  label: Reset Lamp Time
  kind: action
  command: "RESET LAMPTIME"
  params: []

- id: reset_image
  label: Reset Current Image Adjustment
  kind: action
  command: "RESET IMAGE"
  params: []

- id: reset_system
  label: Reset System to Factory Settings
  kind: action
  command: "RESET SYSTEM"
  params: []

- id: reset_all
  label: Reset All Settings
  kind: action
  command: "RESET ALL"
  params: []

- id: rgbgain_set
  label: Set RGB Gain Adjustment
  kind: action
  command: "RGBGAIN={r},{g},{b}"
  params:
    - name: r
      type: integer
      description: R gain -60 to 60
    - name: g
      type: integer
      description: G gain -60 to 60
    - name: b
      type: integer
      description: B gain -60 to 60

- id: rgbgain_get
  label: Get RGB Gain Adjustment
  kind: query
  command: "GET RGBGAIN"
  params: []

- id: rgboffset_set
  label: Set RGB Offset Adjustment
  kind: action
  command: "RGBOFFSET={r},{g},{b}"
  params:
    - name: r
      type: integer
      description: R offset -60 to 60
    - name: g
      type: integer
      description: G offset -60 to 60
    - name: b
      type: integer
      description: B offset -60 to 60

- id: rgboffset_get
  label: Get RGB Offset Adjustment
  kind: query
  command: "GET RGBOFFSET"
  params: []

- id: romver_get
  label: Get ROM Version
  kind: query
  command: "GET ROMVER"
  params: []

- id: sat_set
  label: Set Color Saturation
  kind: action
  command: "SAT={value}"
  params:
    - name: value
      type: integer
      description: -20 to 20

- id: sat_get
  label: Get Color Saturation
  kind: query
  command: "GET SAT"
  params: []

- id: scrnaspect_set
  label: Set Screen Aspect
  kind: action
  command: "SCRNASPECT={value}"
  params:
    - name: value
      type: enum
      values: ["4:3", "16:9", "16:9_DIS"]

- id: scrnaspect_get
  label: Get Screen Aspect Setting
  kind: query
  command: "GET SCRNASPECT"
  params: []

- id: sel_set
  label: Set Input Signal Selection
  kind: action
  command: "SEL={value}"
  params:
    - name: value
      type: enum
      values: [AUTO]

- id: sel_get
  label: Get Detected Input Signal
  kind: query
  command: "GET SEL"
  params: []

- id: sharp_set
  label: Set Sharpness
  kind: action
  command: "SHARP={value}"
  params:
    - name: value
      type: integer
      description: -10 to 10

- id: sharp_get
  label: Get Sharpness
  kind: query
  command: "GET SHARP"
  params: []

- id: signalstatus_get
  label: Get Signal Status
  kind: query
  command: "GET SIGNALSTATUS"
  params: []

- id: track_set
  label: Set Tracking Adjustment
  kind: action
  command: "TRACK={value}"
  params:
    - name: value
      type: integer
      description: Tracking value (A-RGB1/A-RGB2 input only)

- id: track_get
  label: Get Tracking Adjustment
  kind: query
  command: "GET TRACK"
  params: []

- id: vks_set
  label: Set Vertical Keystone
  kind: action
  command: "VKS={value}"
  params:
    - name: value
      type: integer
      description: Vertical keystone distortion value

- id: vks_get
  label: Get Vertical Keystone Setting
  kind: query
  command: "GET VKS"
  params: []

- id: wb_set
  label: Set Screen Color Correction
  kind: action
  command: "WB={value}"
  params:
    - name: value
      type: enum
      values: [NORMAL, GREENBOARD, ADJUST]

- id: wb_get
  label: Get Screen Color Correction
  kind: query
  command: "GET WB"
  params: []

- id: wbrgb_set
  label: Set Screen Color Correction RGB Adjustment
  kind: action
  command: "WBRGB={r},{g},{b}"
  params:
    - name: r
      type: integer
      description: R adjustment -20 to 20
    - name: g
      type: integer
      description: G adjustment -20 to 20
    - name: b
      type: integer
      description: B adjustment -20 to 20

- id: wbrgb_get
  label: Get Screen Color Correction RGB Adjustment
  kind: query
  command: "GET WBRGB"
  params: []

- id: zcontdrv_set
  label: Zoom Lens Continuous Drive
  kind: action
  command: "ZCONTDRV={value}"
  params:
    - name: value
      type: enum
      values: [STOP, WIDE, TELE]

- id: zstepdrv_set
  label: Zoom Lens Step Drive
  kind: action
  command: "ZSTEPDRV={value}"
  params:
    - name: value
      type: enum
      values: [WIDE, TELE]

Feedbacks

- id: power_status
  query_command: "GET POWER"
  description: Returns g:POWER=OFF|OFF2ON|ON|ON2PMM|PMM|PMM2ON|ON2OFF

- id: input_status
  query_command: "GET INPUT"
  description: Returns g:INPUT=<current input selection>

- id: error_status
  query_command: "GET ERR"
  description: Returns g:ERR=NO_ERROR|ABNORMAL_TEMPERATURE|FAULTY_LAMP|FAULTY_LAMP_COVER|FAULTY_COOLING_FAN|FAULTY_POWER_SUPPLY|FAULTY_AK|FAULTY_ASC|FAULTY_AF|FAULTY_POWER_ZOOM|FAULTY_POWER_FOCUS

- id: signal_status
  query_command: "GET SIGNALSTATUS"
  description: Returns g:SIGNALSTATUS=NO_SIGNAL|DISPLAYING|SETTING

- id: lamp_counter
  query_command: "GET LAMPCOUNTER"
  description: Returns g:LAMPCOUNTER="<encoded string indicating lamp hours>"

- id: lamp_time
  query_command: "GET LMPT"
  description: Returns g:LMPT=<hhhh>:<mm> (hours:minutes)

- id: product_code
  query_command: "GET PRODCODE"
  description: Returns g:PRODCODE="SX80MarkII" or "SX80MarkIIM"

- id: rom_version
  query_command: "GET ROMVER"
  description: Returns g:ROMVER="<version string>"

- id: command_version
  query_command: "GET COMVER"
  description: Returns g:COMVER="<version string>"

- id: image_mode
  query_command: "GET IMAGE"
  description: Returns g:IMAGE=STANDARD|PRESENTATION|SRGB|MOVIE|PHOTO|DCM_SIM

- id: blank_state
  query_command: "GET BLANK"
  description: Returns g:BLANK=ON|OFF

- id: freeze_state
  query_command: "GET FREEZE"
  description: Returns g:FREEZE=ON|OFF

- id: mute_state
  query_command: "GET MUTE"
  description: Returns g:MUTE=ON|OFF

- id: volume_level
  query_command: "GET AVOL"
  description: Returns g:AVOL=<0-20>

Variables

[]

Events

[]

Macros

[]

Safety

confirmation_required_for: []
interlocks:
  - DPON=ON cannot be set when PMM=OFF (projector returns e:1004 POWER_MANAGEMENT_OFF)
  - PMM=OFF cannot be set when DPON=ON (projector returns e:1005 DIRECT_POWER_ON)
  - RESET SYSTEM and RESET ALL require power cycle after execution
  - FCONTDRV and ZCONTDRV continuous drives must be stopped with STOP before issuing most other commands

Notes

Commands are ASCII strings terminated by CR, LF, CR+LF, or Null (00h); the projector auto-detects the delimiter type and mirrors it in responses. Serial connection uses RS-232C at 19200 baud, 8N2, no flow control; LAN uses TCP/IP (port unspecified in source). Responses are prefixed: i: for status (OK/BUSY), w: for warnings, e: for errors, g: for GET query replies. Commands may also use the ? prefix as an alternative to GET for reference queries (e.g., ?POWER is equivalent to GET POWER).

Provenance

source_domains:
  - atec.ro
  - cdn.marketing-cloud.io
  - manuallib.com
  - asset.fujifilm.com
  - manualshelf.com
source_urls:
  - https://atec.ro/upload/produse/specs/Canon_XEED_SX80_Mark_II_Commands.pdf
  - https://cdn.marketing-cloud.io/wp-content/canon_rebranding/uploads/2025/03/24155528/XC_Control_Protocol_specification_008.pdf
  - https://www.manuallib.com/download//CANON-SX80-USER-MANUAL.PDF
  - https://asset.fujifilm.com/global/files/2026-04/7189d8e374796e6a81045986a72ad99e/pelco-d_protocol_specification_for_sx800_v3.20.0_en.pdf
  - https://www.manualshelf.com/manual/canon/realis-sx80/realis-sx80-commands.html
retrieved_at: 2026-05-14T13:47:40.948Z
last_checked_at: 2026-06-23T10:13:52.295Z

Verification Summary

verdict: verified
checked_at: 2026-06-23T10:13:52.295Z
matched_actions: 199
action_count: 199
confidence: medium
summary: "All 199 spec action units match verbatim source commands; serial transport (19200/8/N/2) confirmed; source catalogue fully represented. (2 unresolved item(s) noted in Known Gaps.)"

Known Gaps

- "LAN TCP port number not stated in source; serial port number for LAN connection not provided"
- "TCP port number not stated in source"

From the AI4AV catalog (https://ai4av.net) · ODbL-1.0

Summary

protocols: - serial - tcp serial: baud_rate: 19200 data_bits: 8 parity: none stop_bits: 2 flow_control: none addressing: port: null # UNRESOLVED: TCP port number not stated in source auth: type: none # inferred: no auth procedure in source

- powerable # inferred from POWER ON/OFF command - queryable # inferred from GET/? query commands returning state - routable # inferred from INPUT selection command - levelable # inferred from AVOL, BRI, CONT, SHARP, GAMMA, SAT commands

Actions

- id: six_axis_adjustment_set label: 6-Axis Adjustment ON/OFF kind: action command: "6AXADJ={value}" params: - name: value type: enum values: [ON, OFF] - id: six_axis_adjustment_get label: Get 6-Axis Adjustment State kind: query command: "GET 6AXADJ" params: [] - id: six_axis_r_set label: Set 6-Axis R Hue/Saturation kind: action command: "6AXR={hue},{saturation}" params: - name: hue type: integer description: R hue -20 to 20 - name: saturation type: integer description: R saturation -20 to 20 - id: six_axis_r_get label: Get 6-Axis R Hue/Saturation kind: query command: "GET 6AXR" params: [] - id: six_axis_g_set label: Set 6-Axis G Hue/Saturation kind: action command: "6AXG={hue},{saturation}" params: - name: hue type: integer description: G hue -20 to 20 - name: saturation type: integer description: G saturation -20 to 20 - id: six_axis_g_get label: Get 6-Axis G Hue/Saturation kind: query command: "GET 6AXG" params: [] - id: six_axis_b_set label: Set 6-Axis B Hue/Saturation kind: action command: "6AXB={hue},{saturation}" params: - name: hue type: integer description: B hue -20 to 20 - name: saturation type: integer description: B saturation -20 to 20 - id: six_axis_b_get label: Get 6-Axis B Hue/Saturation kind: query command: "GET 6AXB" params: [] - id: six_axis_c_set label: Set 6-Axis C Hue/Saturation kind: action command: "6AXC={hue},{saturation}" params: - name: hue type: integer description: C hue -20 to 20 - name: saturation type: integer description: C saturation -20 to 20 - id: six_axis_c_get label: Get 6-Axis C Hue/Saturation kind: query command: "GET 6AXC" params: [] - id: six_axis_m_set label: Set 6-Axis M Hue/Saturation kind: action command: "6AXM={hue},{saturation}" params: - name: hue type: integer description: M hue -20 to 20 - name: saturation type: integer description: M saturation -20 to 20 - id: six_axis_m_get label: Get 6-Axis M Hue/Saturation kind: query command: "GET 6AXM" params: [] - id: six_axis_y_set label: Set 6-Axis Y Hue/Saturation kind: action command: "6AXY={hue},{saturation}" params: - name: hue type: integer description: Y hue -20 to 20 - name: saturation type: integer description: Y saturation -20 to 20 - id: six_axis_y_get label: Get 6-Axis Y Hue/Saturation kind: query command: "GET 6AXY" params: [] - id: ascombo_af_set label: Set Auto Setup Combination AF kind: action command: "ASCOMBO_AF={value}" params: - name: value type: enum values: [ON, OFF] - id: ascombo_af_get label: Get Auto Setup Combination AF kind: query command: "GET ASCOMBO_AF" params: [] - id: ascombo_avk_set label: Set Auto Setup Combination AVK kind: action command: "ASCOMBO_AVK={value}" params: - name: value type: enum values: [ON, OFF] - id: ascombo_avk_get label: Get Auto Setup Combination AVK kind: query command: "GET ASCOMBO_AVK" params: [] - id: ascombo_ainp_set label: Set Auto Setup Combination AINP kind: action command: "ASCOMBO_AINP={value}" params: - name: value type: enum values: [ON, OFF] - id: ascombo_ainp_get label: Get Auto Setup Combination AINP kind: query command: "GET ASCOMBO_AINP" params: [] - id: ascombo_asc_set label: Set Auto Setup Combination ASC kind: action command: "ASCOMBO_ASC={value}" params: - name: value type: enum values: [ON, OFF] - id: ascombo_asc_get label: Get Auto Setup Combination ASC kind: query command: "GET ASCOMBO_ASC" params: [] - id: aspect_set label: Set Screen Aspect kind: action command: "ASPECT={value}" params: - name: value type: enum values: [AUTO, "4:3", "16:9", FULL, ZOOM, TRUE] - id: aspect_get label: Get Screen Aspect kind: query command: "GET ASPECT" params: [] - id: autopc label: Auto PC kind: action command: "AUTOPC" params: [] - id: autosetexe_focus label: Auto Setup — Focus kind: action command: "AUTOSETEXE FOCUS" params: [] - id: autosetexe_vks label: Auto Setup — Vertical Keystone kind: action command: "AUTOSETEXE VKS" params: [] - id: autosetexe_scrn label: Auto Setup — Screen Color Correction kind: action command: "AUTOSETEXE SCRN" params: [] - id: autosetexe_input label: Auto Setup — Auto Signal Sensing kind: action command: "AUTOSETEXE INPUT" params: [] - id: avol_set label: Set Audio Volume kind: action command: "AVOL={level}" params: - name: level type: integer description: 0 to 20 - id: avol_get label: Get Audio Volume kind: query command: "GET AVOL" params: [] - id: blank_set label: Set Blank kind: action command: "BLANK={value}" params: - name: value type: enum values: [ON, OFF] - id: blank_get label: Get Blank State kind: query command: "GET BLANK" params: [] - id: blankcolor_set label: Set Blank Screen Color kind: action command: "BLANKCOLOR={value}" params: - name: value type: enum values: [BLACK, BLUE] - id: blankcolor_get label: Get Blank Screen Color kind: query command: "GET BLANKCOLOR" params: [] - id: bri_set label: Set Brightness kind: action command: "BRI={value}" params: - name: value type: integer description: -20 to 20 - id: bri_get label: Get Brightness kind: query command: "GET BRI" params: [] - id: bvol_set label: Set Beep Sound kind: action command: "BVOL={value}" params: - name: value type: enum values: ["0", "1"] description: "0=mute, 1=output" - id: bvol_get label: Get Beep Sound Setting kind: query command: "GET BVOL" params: [] - id: comver_get label: Get User Command Version kind: query command: "GET COMVER" params: [] - id: cont_set label: Set Contrast kind: action command: "CONT={value}" params: - name: value type: integer description: -20 to 20 - id: cont_get label: Get Contrast kind: query command: "GET CONT" params: [] - id: dgamma_set label: Set Dynamic Gamma kind: action command: "DGAMMA={value}" params: - name: value type: enum values: [OFF, WEAK, STRONG] - id: dgamma_get label: Get Dynamic Gamma kind: query command: "GET DGAMMA" params: [] - id: dots_set label: Set Total Number of Dots kind: action command: "DOTS={value}" params: - name: value type: integer description: Number of dots (A-RGB1/A-RGB2 input only) - id: dots_get label: Get Total Number of Dots kind: query command: "GET DOTS" params: [] - id: dpon_set label: Set Direct Power-On kind: action command: "DPON={value}" params: - name: value type: enum values: [ON, OFF] - id: dpon_get label: Get Direct Power-On Setting kind: query command: "GET DPON" params: [] - id: err_get label: Get Error Information kind: query command: "GET ERR" params: [] - id: fcontdrv_set label: Focus Lens Continuous Drive kind: action command: "FCONTDRV={value}" params: - name: value type: enum values: [STOP, FAR, NEAR] - id: freeze_set label: Set Freeze kind: action command: "FREEZE={value}" params: - name: value type: enum values: [ON, OFF] - id: freeze_get label: Get Freeze State kind: query command: "GET FREEZE" params: [] - id: fstepdrv_set label: Focus Lens Step Drive kind: action command: "FSTEPDRV={value}" params: - name: value type: enum values: [FAR, NEAR] - id: gamma_set label: Set Gamma Adjustment kind: action command: "GAMMA={value}" params: - name: value type: integer description: -10 to 10 - id: gamma_get label: Get Gamma Adjustment kind: query command: "GET GAMMA" params: [] - id: guide_set label: Set Guide Display kind: action command: "GUIDE={value}" params: - name: value type: enum values: [ON, OFF] - id: guide_get label: Get Guide Display Setting kind: query command: "GET GUIDE" params: [] - id: hpix_set label: Set Horizontal Resolution kind: action command: "HPIX={value}" params: - name: value type: integer description: Horizontal resolution (D-RGB/A-RGB1/A-RGB2 input only) - id: hpix_get label: Get Horizontal Resolution kind: query command: "GET HPIX" params: [] - id: vpix_set label: Set Vertical Resolution kind: action command: "VPIX={value}" params: - name: value type: integer description: Vertical resolution (D-RGB/A-RGB1/A-RGB2 input only) - id: vpix_get label: Get Vertical Resolution kind: query command: "GET VPIX" params: [] - id: hpos_set label: Set Horizontal Position kind: action command: "HPOS={value}" params: - name: value type: integer description: Horizontal position (A-RGB1/A-RGB2 input only) - id: hpos_get label: Get Horizontal Position kind: query command: "GET HPOS" params: [] - id: vpos_set label: Set Vertical Position kind: action command: "VPOS={value}" params: - name: value type: integer description: Vertical position (A-RGB1/A-RGB2 input only) - id: vpos_get label: Get Vertical Position kind: query command: "GET VPOS" params: [] - id: hue_set label: Set Hue kind: action command: "HUE={value}" params: - name: value type: integer description: -20 to 20 (COMP/VIDEO/S-VIDEO/HDMI input only) - id: hue_get label: Get Hue kind: query command: "GET HUE" params: [] - id: image_set label: Set Image Mode kind: action command: "IMAGE={value}" params: - name: value type: enum values: [STANDARD, PRESENTATION, SRGB, MOVIE, PHOTO, DCM_SIM] - id: image_get label: Get Image Mode kind: query command: "GET IMAGE" params: [] - id: imageflip_set label: Set Flip Display kind: action command: "IMAGEFLIP={value}" params: - name: value type: enum values: [NONE, CEILING, REAR, REAR_CEILING] - id: imageflip_get label: Get Flip Display Setting kind: query command: "GET IMAGEFLIP" params: [] - id: input_set label: Set Input Selection kind: action command: "INPUT={value}" params: - name: value type: enum values: [D-RGB, A-RGB1, A-RGB2, COMP, VIDEO, S-VIDEO, HDMI, USB] - id: input_get label: Get Input Selection kind: query command: "GET INPUT" params: [] - id: keylock_set label: Set Keylock kind: action command: "KEYLOCK={value}" params: - name: value type: enum values: [OFF, MAIN, RC] - id: keylock_get label: Get Keylock Setting kind: query command: "GET KEYLOCK" params: [] - id: lamp_set label: Set Lamp Output kind: action command: "LAMP={value}" params: - name: value type: enum values: [NORMAL, SILENT] - id: lamp_get label: Get Lamp Output Setting kind: query command: "GET LAMP" params: [] - id: lampcounter_get label: Get Lamp ON Time kind: query command: "GET LAMPCOUNTER" params: [] - id: lang_set label: Set Language kind: action command: "LANG={value}" params: - name: value type: enum values: [ENG, DUT, NOR, FRA, RUS, TUR, GER, CHS, POL, ITA, CHT, HUN, SPA, KOR, CZE, POR, JPN, ARA, SWE, FIN, DAN] - id: lang_get label: Get Language kind: query command: "GET LANG" params: [] - id: ledilluminate_set label: Set LED Illumination kind: action command: "LEDILLUMINATE={value}" params: - name: value type: enum values: [ON, OFF] - id: ledilluminate_get label: Get LED Illumination Setting kind: query command: "GET LEDILLUMINATE" params: [] - id: lmpt_get label: Get Lamp Time kind: query command: "GET LMPT" params: [] - id: main_power label: Front Panel — POWER kind: action command: "MAIN POWER" params: [] - id: main_power_off label: Front Panel — POWER OFF (double press) kind: action command: "MAIN POWER_OFF" params: [] - id: main_menu label: Front Panel — MENU kind: action command: "MAIN MENU" params: [] - id: main_autoset label: Front Panel — AUTO SET kind: action command: "MAIN AUTOSET" params: [] - id: main_input label: Front Panel — INPUT kind: action command: "MAIN INPUT" params: [] - id: main_autopc label: Front Panel — AUTOPC kind: action command: "MAIN AUTOPC" params: [] - id: main_keystone label: Front Panel — KEYSTONE kind: action command: "MAIN KEYSTONE" params: [] - id: main_up label: Front Panel — UP kind: action command: "MAIN UP" params: [] - id: main_up_rep label: Front Panel — UP Button Press Start kind: action command: "MAIN UP+REP" params: [] - id: main_down label: Front Panel — DOWN kind: action command: "MAIN DOWN" params: [] - id: main_down_rep label: Front Panel — DOWN Button Press Start kind: action command: "MAIN DOWN+REP" params: [] - id: main_left label: Front Panel — LEFT kind: action command: "MAIN LEFT" params: [] - id: main_left_rep label: Front Panel — LEFT Button Press Start kind: action command: "MAIN LEFT+REP" params: [] - id: main_right label: Front Panel — RIGHT kind: action command: "MAIN RIGHT" params: [] - id: main_right_rep label: Front Panel — RIGHT Button Press Start kind: action command: "MAIN RIGHT+REP" params: [] - id: main_ok label: Front Panel — OK kind: action command: "MAIN OK" params: [] - id: main_focus label: Front Panel — FOCUS kind: action command: "MAIN FOCUS" params: [] - id: main_zoom label: Front Panel — ZOOM kind: action command: "MAIN ZOOM" params: [] - id: main_rep_end label: Front Panel — Button Press End kind: action command: "MAIN *-REP" params: [] - id: memcadj_set label: Set Memory Color Adjustment kind: action command: "MEMCADJ={value}" params: - name: value type: enum values: [OFF, MEM_L, MEM_M, MEM_H] - id: memcadj_get label: Get Memory Color Adjustment kind: query command: "GET MEMCADJ" params: [] - id: mode_remote label: Set Control Mode REMOTE (compatibility) kind: action command: "REMOTE" params: [] - id: mode_local label: Set Control Mode LOCAL (compatibility) kind: action command: "LOCAL" params: [] - id: mode_get label: Get Control Mode kind: query command: "GET MODE" params: [] - id: mute_set label: Set Mute kind: action command: "MUTE={value}" params: - name: value type: enum values: [ON, OFF] - id: mute_get label: Get Mute State kind: query command: "GET MUTE" params: [] - id: nosig_set label: Set No-Signal Screen kind: action command: "NOSIG={value}" params: - name: value type: enum values: [BLACK, BLUE] - id: nosig_get label: Get No-Signal Screen Setting kind: query command: "GET NOSIG" params: [] - id: pjon_set label: Set Startup Display Screen kind: action command: "PJON={value}" params: - name: value type: enum values: [CANON, SKIP] - id: pjon_get label: Get Startup Display Screen Setting kind: query command: "GET PJON" params: [] - id: pmm_set label: Set Power Management kind: action command: "PMM={value}" params: - name: value type: enum values: [OFF, STANDBY, EXIT] - id: pmm_get label: Get Power Management Setting kind: query command: "GET PMM" params: [] - id: power_on label: Power ON kind: action command: "POWER ON" params: [] - id: power_off label: Power OFF kind: action command: "POWER OFF" params: [] - id: power_get label: Get Power State kind: query command: "GET POWER" params: [] - id: prodcode_get label: Get Product Code kind: query command: "GET PRODCODE" params: [] - id: prog_set label: Set Progressive Conversion kind: action command: "PROG={value}" params: - name: value type: enum values: ["0", "1", "2"] description: "0=OFF, 1=ON, 2=AUTO" - id: prog_get label: Get Progressive Conversion Setting kind: query command: "GET PROG" params: [] - id: rc_power label: Remote Control — POWER kind: action command: "RC POWER" params: [] - id: rc_power_off label: Remote Control — POWER OFF (double press) kind: action command: "RC POWER_OFF" params: [] - id: rc_menu label: Remote Control — MENU kind: action command: "RC MENU" params: [] - id: rc_autoset label: Remote Control — AUTO SET kind: action command: "RC AUTOSET" params: [] - id: rc_input label: Remote Control — INPUT kind: action command: "RC INPUT" params: [] - id: rc_aspect label: Remote Control — ASPECT kind: action command: "RC ASPECT" params: [] - id: rc_autopc label: Remote Control — AUTOPC kind: action command: "RC AUTOPC" params: [] - id: rc_keystone label: Remote Control — KEYSTONE kind: action command: "RC KEYSTONE" params: [] - id: rc_up label: Remote Control — UP kind: action command: "RC UP" params: [] - id: rc_up_rep label: Remote Control — UP Button Press Start kind: action command: "RC UP+REP" params: [] - id: rc_down label: Remote Control — DOWN kind: action command: "RC DOWN" params: [] - id: rc_down_rep label: Remote Control — DOWN Button Press Start kind: action command: "RC DOWN+REP" params: [] - id: rc_left label: Remote Control — LEFT kind: action command: "RC LEFT" params: [] - id: rc_left_rep label: Remote Control — LEFT Button Press Start kind: action command: "RC LEFT+REP" params: [] - id: rc_right label: Remote Control — RIGHT kind: action command: "RC RIGHT" params: [] - id: rc_right_rep label: Remote Control — RIGHT Button Press Start kind: action command: "RC RIGHT+REP" params: [] - id: rc_ok label: Remote Control — OK kind: action command: "RC OK" params: [] - id: rc_image label: Remote Control — IMAGE kind: action command: "RC IMAGE" params: [] - id: rc_freeze label: Remote Control — FREEZE kind: action command: "RC FREEZE" params: [] - id: rc_vol_p label: Remote Control — VOL+ kind: action command: "RC VOL_P" params: [] - id: rc_vol_p_rep label: Remote Control — VOL+ Button Press Start kind: action command: "RC VOL_P+REP" params: [] - id: rc_vol_m label: Remote Control — VOL- kind: action command: "RC VOL_M" params: [] - id: rc_vol_m_rep label: Remote Control — VOL- Button Press Start kind: action command: "RC VOL_M+REP" params: [] - id: rc_blank label: Remote Control — BLANK kind: action command: "RC BLANK" params: [] - id: rc_mute label: Remote Control — MUTE kind: action command: "RC MUTE" params: [] - id: rc_p_timer label: Remote Control — P-TIMER kind: action command: "RC P_TIMER" params: [] - id: rc_lamp label: Remote Control — LAMP kind: action command: "RC LAMP" params: [] - id: rc_dzoom_p label: Remote Control — DZOOM+ kind: action command: "RC DZOOM_P" params: [] - id: rc_dzoom_p_rep label: Remote Control — DZOOM+ Button Press Start kind: action command: "RC DZOOM_P+REP" params: [] - id: rc_dzoom_m label: Remote Control — DZOOM- kind: action command: "RC DZOOM_M" params: [] - id: rc_dzoom_m_rep label: Remote Control — DZOOM- Button Press Start kind: action command: "RC DZOOM_M+REP" params: [] - id: rc_focus label: Remote Control — FOCUS kind: action command: "RC FOCUS" params: [] - id: rc_zoom label: Remote Control — ZOOM kind: action command: "RC ZOOM" params: [] - id: rc_rep_end label: Remote Control — Button Press End kind: action command: "RC *-REP" params: [] - id: rcch_set label: Set Remote Control Channel kind: action command: "RCCH={value}" params: - name: value type: enum values: ["1", "2"] - id: rcch_get label: Get Remote Control Channel kind: query command: "GET RCCH" params: [] - id: reset_lamptime label: Reset Lamp Time kind: action command: "RESET LAMPTIME" params: [] - id: reset_image label: Reset Current Image Adjustment kind: action command: "RESET IMAGE" params: [] - id: reset_system label: Reset System to Factory Settings kind: action command: "RESET SYSTEM" params: [] - id: reset_all label: Reset All Settings kind: action command: "RESET ALL" params: [] - id: rgbgain_set label: Set RGB Gain Adjustment kind: action command: "RGBGAIN={r},{g},{b}" params: - name: r type: integer description: R gain -60 to 60 - name: g type: integer description: G gain -60 to 60 - name: b type: integer description: B gain -60 to 60 - id: rgbgain_get label: Get RGB Gain Adjustment kind: query command: "GET RGBGAIN" params: [] - id: rgboffset_set label: Set RGB Offset Adjustment kind: action command: "RGBOFFSET={r},{g},{b}" params: - name: r type: integer description: R offset -60 to 60 - name: g type: integer description: G offset -60 to 60 - name: b type: integer description: B offset -60 to 60 - id: rgboffset_get label: Get RGB Offset Adjustment kind: query command: "GET RGBOFFSET" params: [] - id: romver_get label: Get ROM Version kind: query command: "GET ROMVER" params: [] - id: sat_set label: Set Color Saturation kind: action command: "SAT={value}" params: - name: value type: integer description: -20 to 20 - id: sat_get label: Get Color Saturation kind: query command: "GET SAT" params: [] - id: scrnaspect_set label: Set Screen Aspect kind: action command: "SCRNASPECT={value}" params: - name: value type: enum values: ["4:3", "16:9", "16:9_DIS"] - id: scrnaspect_get label: Get Screen Aspect Setting kind: query command: "GET SCRNASPECT" params: [] - id: sel_set label: Set Input Signal Selection kind: action command: "SEL={value}" params: - name: value type: enum values: [AUTO] - id: sel_get label: Get Detected Input Signal kind: query command: "GET SEL" params: [] - id: sharp_set label: Set Sharpness kind: action command: "SHARP={value}" params: - name: value type: integer description: -10 to 10 - id: sharp_get label: Get Sharpness kind: query command: "GET SHARP" params: [] - id: signalstatus_get label: Get Signal Status kind: query command: "GET SIGNALSTATUS" params: [] - id: track_set label: Set Tracking Adjustment kind: action command: "TRACK={value}" params: - name: value type: integer description: Tracking value (A-RGB1/A-RGB2 input only) - id: track_get label: Get Tracking Adjustment kind: query command: "GET TRACK" params: [] - id: vks_set label: Set Vertical Keystone kind: action command: "VKS={value}" params: - name: value type: integer description: Vertical keystone distortion value - id: vks_get label: Get Vertical Keystone Setting kind: query command: "GET VKS" params: [] - id: wb_set label: Set Screen Color Correction kind: action command: "WB={value}" params: - name: value type: enum values: [NORMAL, GREENBOARD, ADJUST] - id: wb_get label: Get Screen Color Correction kind: query command: "GET WB" params: [] - id: wbrgb_set label: Set Screen Color Correction RGB Adjustment kind: action command: "WBRGB={r},{g},{b}" params: - name: r type: integer description: R adjustment -20 to 20 - name: g type: integer description: G adjustment -20 to 20 - name: b type: integer description: B adjustment -20 to 20 - id: wbrgb_get label: Get Screen Color Correction RGB Adjustment kind: query command: "GET WBRGB" params: [] - id: zcontdrv_set label: Zoom Lens Continuous Drive kind: action command: "ZCONTDRV={value}" params: - name: value type: enum values: [STOP, WIDE, TELE] - id: zstepdrv_set label: Zoom Lens Step Drive kind: action command: "ZSTEPDRV={value}" params: - name: value type: enum values: [WIDE, TELE]

Feedbacks

- id: power_status query_command: "GET POWER" description: Returns g:POWER=OFF|OFF2ON|ON|ON2PMM|PMM|PMM2ON|ON2OFF - id: input_status query_command: "GET INPUT" description: Returns g:INPUT=<current input selection> - id: error_status query_command: "GET ERR" description: Returns g:ERR=NO_ERROR|ABNORMAL_TEMPERATURE|FAULTY_LAMP|FAULTY_LAMP_COVER|FAULTY_COOLING_FAN|FAULTY_POWER_SUPPLY|FAULTY_AK|FAULTY_ASC|FAULTY_AF|FAULTY_POWER_ZOOM|FAULTY_POWER_FOCUS - id: signal_status query_command: "GET SIGNALSTATUS" description: Returns g:SIGNALSTATUS=NO_SIGNAL|DISPLAYING|SETTING - id: lamp_counter query_command: "GET LAMPCOUNTER" description: Returns g:LAMPCOUNTER="<encoded string indicating lamp hours>" - id: lamp_time query_command: "GET LMPT" description: Returns g:LMPT=<hhhh>:<mm> (hours:minutes) - id: product_code query_command: "GET PRODCODE" description: Returns g:PRODCODE="SX80MarkII" or "SX80MarkIIM" - id: rom_version query_command: "GET ROMVER" description: Returns g:ROMVER="<version string>" - id: command_version query_command: "GET COMVER" description: Returns g:COMVER="<version string>" - id: image_mode query_command: "GET IMAGE" description: Returns g:IMAGE=STANDARD|PRESENTATION|SRGB|MOVIE|PHOTO|DCM_SIM - id: blank_state query_command: "GET BLANK" description: Returns g:BLANK=ON|OFF - id: freeze_state query_command: "GET FREEZE" description: Returns g:FREEZE=ON|OFF - id: mute_state query_command: "GET MUTE" description: Returns g:MUTE=ON|OFF - id: volume_level query_command: "GET AVOL" description: Returns g:AVOL=<0-20>

Safety

confirmation_required_for: [] interlocks: - DPON=ON cannot be set when PMM=OFF (projector returns e:1004 POWER_MANAGEMENT_OFF) - PMM=OFF cannot be set when DPON=ON (projector returns e:1005 DIRECT_POWER_ON) - RESET SYSTEM and RESET ALL require power cycle after execution - FCONTDRV and ZCONTDRV continuous drives must be stopped with STOP before issuing most other commands

Notes

Provenance

source_domains: - atec.ro - cdn.marketing-cloud.io - manuallib.com - asset.fujifilm.com - manualshelf.com source_urls: - https://atec.ro/upload/produse/specs/Canon_XEED_SX80_Mark_II_Commands.pdf - https://cdn.marketing-cloud.io/wp-content/canon_rebranding/uploads/2025/03/24155528/XC_Control_Protocol_specification_008.pdf - https://www.manuallib.com/download//CANON-SX80-USER-MANUAL.PDF - https://asset.fujifilm.com/global/files/2026-04/7189d8e374796e6a81045986a72ad99e/pelco-d_protocol_specification_for_sx800_v3.20.0_en.pdf - https://www.manualshelf.com/manual/canon/realis-sx80/realis-sx80-commands.html retrieved_at: 2026-05-14T13:47:40.948Z last_checked_at: 2026-06-23T10:13:52.295Z

Verification Summary

verdict: verified checked_at: 2026-06-23T10:13:52.295Z matched_actions: 199 action_count: 199 confidence: medium summary: "All 199 spec action units match verbatim source commands; serial transport (19200/8/N/2) confirmed; source catalogue fully represented. (2 unresolved item(s) noted in Known Gaps.)"

Canon SX80 / SX800 Control Spec

Compatible models

Summary

Transport

Traits

Actions

Feedbacks

Variables

Events

Macros

Safety

Notes

Provenance

Verification Summary

Known Gaps

Source & contribution

Canon SX80 / SX800 Control Spec

Compatible models

Summary

Transport

Traits

Actions

Feedbacks

Variables

Events

Macros

Safety

Notes

Provenance

Verification Summary

Known Gaps

Source & contribution